Telnet issue

If the switches without user name and password, we cannot telnet in.

But what happens if Acess Point without one, are we able to telnet in?

(1) Yes you will be

(2) you need local connection

(3) Yes (bbb)

(4) no... you have a password or use the local connection.

Here is a link that will help you better understand.

http://www.Cisco.com/en/us/products/SW/iosswrel/ps1818/products_configuration_example09186a0080204528.shtml#PW-line

Tags: Cisco Wireless

Similar Questions

Telnet issue... What am I doing wrong?

OK, I have two configuration network to see them via the VPN. The VPN is provided by a 515e and a 501F catalogue. 515e 192.168.50.0 network, the network 501F to the catalog is 192.168.51.0

External ip address of the 515e is x.x.71.7, the 501 is x.x.71.8

Problem: I cannot telnet to the 192.168.51.0 behind the 501 network in the external interface of the 515e, but can't leave network 50.0 behind the 515e in the external interface of the 501F catalogue.

Here is my configuration:

515E-

IP address outside the x.x.71.7

IP address inside 192.168.50.1

permit access ip host x.x.71.7 192.168.51.0 list inside_nat0_outbound 255.255.255.0 (hitcnt = 1184)

inside_nat0_outbound 192.168.50.0 ip access list allow 255.255.255.0 host x.x.71.8 (hitcnt = 62)

501F to the catalog-

IP address outside the x.x.71.8

IP address inside the 192.168.51.1

inside_nat0_outbound ip 192.168.51.0 access list allow 255.255.255.0 host x.x.71.7

permit ip host x.x.71.8 192.168.50.0 access list inside_nat0_outbound 255.255.255.0

Why this work one way, but not back? I would have thought that if it worked enough for me to telnet from the side 501 at the 515, then the same configuration would work the 515 at the 501 but does not appear.

Thank you for your help in advance.

Dave

Hi Dave,.

Look at my comments about Telnet in the previous announcement.

A few questions for you:

1. in your config on the Pix 501, whey you have two instructions in your access list.

inside_nat0_outbound 192.168.50.0 ip access list allow 255.255.255.0 192.168.51.0 255.255.255.0

permit access ip host x.x.71.7 192.168.51.0 list inside_nat0_outbound 255.255.255.0

2 and also use a different access list for address matching and NAT 0 cos you will encounter problems when you set up multiple vpn tunnels.

For Ex:

crypto VPNMAP 10 card matches the address 100

access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

crypto VPNMAP 20 card matches the address 101

access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0

access-list 150 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

access-list 150 permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0

NAT (inside) - 0 150 access list

Kind regards

Arul

Telnet buffer issues

Hello

Modems are configured to him telemeter data to a LabView VI. The LabView VI works as expected when cable to the instruments. A modem and an internet connection now replace the electrician, so a reconfiguration of the VI was required using Telnet reads/writes instead of VISA reads/writes. Initially there was some deformations associated with the configuration of the modem, but those who have been developed. Pattern of backstory: I think I've isolated my question how do I use/configure Telnet Read.

My question: drop-outs of data and incomplete data packets. I get 25 bytes of binary data per second, easiestly considered Hex when it broadcasts in. A valid packet looks like this:

0119 81CC 4 47 884B 5722 7ECA 000D FA37 7E52 FC66 7CF7 25 0 04

where 01 begins the sequence and 04 ends the sequence. All the mess inbetween is useful for me but totally uninteresting to most sane people. Attached are two examples of code. The first, TelnetEx.vi, is a simple version of how use the Telnet Read. When I use this Setup, I think I'm buffering 25 bytes of data, then end the line each time a hex04 is observed. Too often, I receive packets that are not 25 bytes long, but end in hex04. Moreover, I could not help gold '' normal' immediate' mode with the Telnet Read - I get some sent to all data packets. (??)

So I thought if I could electrician a way to detect the package of 25 bytes of data in the buffer, then I would outwit the incomplete packets (an incomplete package causes false ears in my data as the VI is wired to look for data in a location particular byte in the data packet). An example of this attempt of poor quality is shown in TelnetEx.vi. When I apply this filter, I don't get any data. The filter is supposed to find hex01, then search for hex04, then count to see if they are 25 bytes apart and if they are, send these data to the rest of the VI because it's a package valid.

One last note: I've been tinkering with the VI and found that if I use the delay time at a sampling faster (10 Hz) that my instrument (instrument = 1 Hz) rate so less I delivered incomplete packets and sometimes there is a break which resembles an abandonment of data and then I get several packages at once. It's probably a problem of connection/packet delivery, but maybe someone has seen this before and knows a good way to deal with?

Is the buffer of Telnet Read a FIFO? Is there a more sophisticated method to check the validitiy of a packet of data that my attempt mutilated?

Thank you

~ Tristan

It's here.

Issue of Telnet and SSH on Cisco 3750.

I turn on Cisco 3750 and everything so I wasn't able to connect in the area. I even changed the source interface and update transport under the VTY lines input method, no luck.

Can I choose to disable SSH by removing the corresponding lines of configs and RSA keys. And I changed the entry to transport back to Telnet. After the reboot of the switch, I'm still not able to connect despite the fact that the box is accessible.

Any help?

Thank you

Jean-Marie

Hello

This should help to confirm the configuration and troubleshooting SSH on your device: -.

http://www.Cisco.com/c/en/us/support/docs/security-VPN/Secure-Shell-SSH/4145-SSH.html

I hope this helps.
Kind regards
Dinesh Moudgil

PS Please rate helpful messages.

PIX 501 - issues with Telnet

I'm currently pre configuration of the firewall, so I had to build a small network to test the configuration. I am able to telnet system when I plug my laptop into the hub inside the firewall. However, when I plug on the external interface and the external address of the box telnet it seems to connect but I get no feedback eventually, he abandoned the connection. I'm trying to telnet on port 25 (to mimic the smtp traffic), the telnet server has been configured to listen on this port. When I try to telnet on 23 he refuses the connection almost immediately. Its almost like the PIX meets the demand of telnet instead of the destination system. I am able to get responses from the system with various icmp traffic.

I have a static (inside, outside) mapping for the system I want to telnet to port 25.

Any ideas?

Thanks in advance.

I would say that. The correction prevents would-be hackers to get HELP and your server smtp VRFY. You will also see:

220 * 0 * 200 * 0 * 0200, instead of what type of server, etc.

Glad to be of service.

Byron

How a router via the Telnet command file

Dear boss

I have a few remote cisco router and have telnet access to the router (172.16.1.1, 172.16.2.1...). I want to add a route to the router through a windows batch file. How do I? Please help me with the sample.

Thanking you

Shahid

Hey Shahid,

The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please post your question in the

TechNet Script Center for assistance.

Hope the helps of information.

Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Is their a fix for the extreme lag by using Telnet on a vista machine?

Extreme lag with vista telnet, no fix for this issue?

Hello
- What exactly are you trying to accomplish?
- What is the error message that you receive?
- How long you have been facing this problem?
- What changes were made before the grant took place?
Reply back with more information, helping us to better understand the issue.

See also: http://support.microsoft.com/kb/555375

Quest Desktop Virtualization (vWorkspace) user profile management issues

Hi, I work on the configuration of the user profile with (Win 7 VDI) virtual desktop management service following the guide of vworkspace administrator 7.6 and any other docs, I found on quest.com and I have a problem with it, there is nothing in the file metaprofiles\global. It doesn't seem to work. I have a file (vdi-storage1) server with action c:\vdiuserprofiles\ created folder where the profile will be stored. I also installed the role of vWorkspace on this file server user profile management and the service is running. 5206 port is open. All the virtual desktops have pntools installed with all the options and I can see that the user profile agent is running. I can reach the storage server (vdi-storage1) using telnet on port 5206 and ping. I even gave domain user full ntfs permissions to the c:\vdiuserprofiles folder, but I don't think that this is necessary.

-In the Managment Console > resources > (right click 'properties') user profiles

-General: Compression: low, log level: detailed, Refresh: 5 minutes

-Storage servers: server name: vdi-storage1, Basic file: c:\vdiuserprofiles\metaprofiles, Folder Global: Global, The TCP Port: 5206

-Silos: name: VirtualDesktopSilo, storage for the user profile server: vdi-storage1

-Properties VirtualDesktopSilo

-Members: name: desktop Windows 7, Type: computer group

- Storage for the user profile server: vdi-storage1

- Automatic backup: 30 minutes

The MC did create the folder metaprofiles\global automatically when I applied the settings. I use supplied with vworkspace default registry keys, and I attributed them to the domain users group. I recorded several times power on and off on the virtual desktop. I noticed 5 second delay on the virtual machine after that I typed the information identification, and before she really connects me since I activated the profile management. A I forgot something or is misconfigured it?

OK, after having received assistance from Dell (Quest) suppor, t the issue happens to be with me remoting (via RDP) for VM directly instead of by the intermediary of the broker vWorkspace, therefore the profile could not be created because I had not the closed valid session so it never created the profile. Once I've tested it using vWorkspace connector this worked.

I need to connect to telnet administrator

When I connect to my computer via telnet to run a command, it gives me an error 5 system, which means that I have no privileges. How can I fix? Already, I log into an account that has administrative privileges on the computer.

I want to be able to use commands with administrator privileges when logged in using telnet.

Note: Maybe this isn't in the right section, if so, please move.

Hi Matthew,

Please write to us.

As the issue that you are facing is related to administrator privileges when logged in using telnet. I suggest you to publish the application on Microsoft TechNet forum because we have experts working on these issues.

You can check the link to post the same query on TechNet:

https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

Hope this information helps. Please contact us if you are having trouble using your Windows.

Thank you.

CSR1000v - Extra return in telnet line/transport

I'm running a weird question with a few CSR1000v routers circula 5.1 ESXi. I created 10 virtual machines and of these 10 cases, I have 1 router which seems if insert an extra line (or a carriage return) in the CLI whenever I hit him "enter." This question followed between SecureCRT and PuTTY. I am also unable to use the "tab" key, upward or down arrows for the history and the '?' does not exit until I hit "enter". Some examples follow:

Router >
Router > en
en
Router #.
Router #.

Arrow:

Router #^ [[has

Arrow:

Router #^ [[B

Tab key:

Router > ^ I

I am using the 'serial console platform' configuration and telnet to my ESXi server with port number address, IE: 172.100.100.2:2003 for Router3. If I telnet between my routers (R1 telnets to an IP address on the interface of the CSR), the issue does not follow. However, now that I have create my VM 11th and 12th, I see the extra line in the sessions during the series of console output.

Anyone ever encountered this before?

Good news! Mark as resolved for others to find. Kevin

Ssh/telnet/web ASA5505 question

I can't access this ASA everywhere except the console.

I'm no expert, ASA, but I compared it to others I have configured asa, and I can't find the error of my ways.

It is expected to be easy, I just need a different set of eyes looking at it now. I hope I don't have too much censor, but I imagine that if I am able to SSH locally, will fix all issues of access I have.

:
ASA Version 7.2 (4)
!
host name X
domain X.local
activate the encrypted password of XXXXXXXXXXXXXXXXXXX
passwd encrypted XXXXXXXXXXXXXXXX
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.27.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!

Banner motd to USE OFFICIAL ONLY. Unauthorized use prohibited
Banner motd people who use this computer system is subject to having all
Banner motd of their activities on this system monitored and recorded without
new notice of Banner motd. Audit of users may include surveillance of the strike.

boot system Disk0: / asa821 - k8.bin
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name X.X.X.12
Name-Server 4.2.2.2
domain pain.local
permit same-security-traffic intra-interface
object-group service XX tcp - udp
60000 64999 object-port Beach
object-group network MySpace
object-network 67.134.143.0 255.255.255.0
object-network 204.16.32.0 255.255.255.0
network-object 216.178.32.0 255.255.224.0
object-group network Facebook
object-network 69.63.176.0 255.255.255.0
object-network 204.15.20.0 255.255.255.0
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
the DM_INLINE_NETWORK_1 object-group network
object-network 10.x.x.0 255.255.255.0
object-network 172.x.x.0 255.255.255.0
object-network 10.x.x.0 255.255.255.0
object-network 10.x.x.0 255.255.255.0
object-network 10.x.x.0 255.255.255.0
object-network 172.x.x.0 255.255.255.0
the LocalLAN object-group network
X subnet Local 192.168.27.x description
object-network 192.168.27.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 10.x.x.0 255.255.255.0
object-network 10.x.x.0 255.255.255.0
object-network 10.x.x.0 255.255.255.0
object-network 10.x.x.0 255.255.255.0
object-network 172.x.x.0 255.255.255.0
object-network 172.x.x.0 255.255.255.0
the DM_INLINE_NETWORK_3 object-group network
network-host 64.x.x.x object
network-host 71.x.x.x object
network-host 74.x.x.x object
network-host 99.x.x.x object
network-host 173.x.x.x object
object-network 192.168.27.0 255.255.255.0
object-network 192.168.1.0 255.255.255.0
192.168.27.0 IP Access-list extended sheep 255.255.255.0 allow object-group DM_INLINE_NETWORK_1
outgoing extended access-list deny ip any object-group inactive MySpace
outgoing extended access-list deny ip any object-group inactive Facebook
outgoing to the icmp a whole allowed extended access list
coming out to the one permitted all ip extended access list
extended access-list extended permitted ip object-LocalLAN group DM_INLINE_NETWORK_1 object
outside_access_in list extended access allowed object-group ip DM_INLINE_NETWORK_3 all
outside_cryptomap list extended access permitted ip object-group LocalLAN-group of objects DM_INLINE_NETWORK_2
pager lines 24
Enable logging
timestamp of the record
registration of emergency critical list level
exploitation forest-size of the buffer 1048576
emergency logging console
monitor debug logging
recording of debug trap
notifications of logging asdm
address record [email protected] / * /
exploitation forest-address recipient [email protected] / * / level of errors
exploitation forest-address recipient [email protected] / * / critical level
logging feature 23
forest-hostdown operating permits
registration of emergency of class auth trap
record labels of class config trap
record labels of class ospf trap
logging of alerts for the vpn trap class
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 192.168.X.X 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
AAA authentication enable LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication http LOCAL console
Enable http server
x.x.x.x 255.255.255.255 out http
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
http 192.168.1.0 255.255.255.0 inside
http 192.168.27.0 255.255.255.0 inside
redirect http outside 80
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt connection tcpmss 1360
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec df - bit clear-df outdoors
card crypto outside_map 2 match address outside_cryptomap
card crypto outside_map 2 set pfs
card crypto outside_map 2 peers set x.x.x.x
card crypto outside_map 2 game of transformation-ESP-AES-128-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
aes encryption
sha hash
Group 5
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
enable client-implementation to date
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 60
Console timeout 0
management-access inside
dhcpd 10.x.x.x 4.2.2.2 dns
dhcpd field pain.local
dhcpd outside auto_config
dhcpd option 156 ascii ftpservers = 10.x.x.x
dhcpd option 42 ip 208.66.175.36
!
dhcpd address 192.168.27.2 - 192.168.27.33 inside
dhcpd allow inside
!

NTP-1 md5 authentication key *.
authenticate the NTP
NTP server 10.x.x.x source inside
username XXXXXXXXX XXXXXXXXXXXXXX encrypted privilege 15 password
tunnel-group 64.X.X.X type ipsec-l2l
IPSec-attributes tunnel-group 64.X.X.X
pre-shared key X
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
: end

The party concerned to control where you are allowed to SSH in the ASA are these lines:
```
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
```
But you have generated public/private keys?

ASA (config) # crypto key generate rsa key general module 2048

--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni

Telnet RV016

Hi guys, I know it's a small business unit, I got my certification ccna with the hope of practice my CLI skills with a cisco device, but I read in the documentation cisco small business routers doesn´t talnet neiter ssh support I mean CLI, is this true?

Hello

Please use our forum

Hi, my name is Johnnatan and I'm part of the community of support to small businesses. Doesn´t Rv016 support SSH or Telnet, you must manage via the GUI, however if you want to buy a router supporting the CLI, you can go to Cisco.com and looking for a router that support, I have a 2800 router to practice at home, it was very helpful to practice with the CLI

I hope you find this answer useful,

"* Please mark the issue as response or write it down so others can benefit from.

Greetings,

Johnnatan Rodriguez Miranda.

Support of Cisco network engineer.

Remote VPN client and Telnet to ASA

Hi guys

I have an ASA connected to the Cisco 2821 router firewall.

I have the router ADSL and lease line connected.

All my traffic for web ports etc. of ADSL ftp and smtp pop3, telnet etc is going to rental online.

My questions as follows:

I am unable to telnet to ASA outside Interface although its configuered.

Unable to connect my remote VPN Client, there is no package debug crypto isakmp, I know that I have a nat that is my before router device my asa, I owe not nat port 4500 and esp more there, but how his confusion.

I'm ataching configuration.

Concerning

It looks like a config issue. Possibly need debug output "debug crypto isa 127".

You may need remove the command «LOCAL authority-server-group»

NAT-traversal is enabled by default on the ASA 8.x version. So you don't have to worry about NAT device in the middle.

Routing issue of Cisco VPN Client ASA

Hi, I use a Barracuda NG for firewalls and I would use a Cisco ASA 5505 for VPN Client connections. But I have the problem that I can't get a connection to the VPN PC connected to the internal network. But I can reach the VPN connected PC from the inside. Here is a diagram of my network:

cisco_asa_prob.jpg

Here the IP Configuration and the routing of the Barracuda firewall table:

screen_shot_2014-08 - 12_at_16.01.42.png

I have a route on the Barracuda NG to the 10.10.10.0/24 network VPN Client on eth0.

The 192.168.1.0/24 LAN I ping the Client comes with Client VPN 10.10.10.11 as it should. But I can't ping or access network resources in the local network for AnyConnected customer's PC that connected through the VPN.

Here is the config Cisco ASA:

 : Saved : : Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz : ASA Version 9.2(2) ! hostname leela names ip local pool VPN-Pool 10.10.10.10-10.10.10.200 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 5 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Vlan5 nameif dmz security-level 50 ip address 172.16.0.250 255.255.255.0 ! ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server 192.168.1.10 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network VPN-Pool subnet 10.10.10.0 255.255.255.0 description VPN-Pool object network NETWORK_OBJ_10.10.10.0_24 subnet 10.10.10.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip object VPN-Pool any access-list dmz_access_in extended permit ip any any access-list global_access extended permit ip any any access-list outside_access_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (inside,dmz) source static any any destination static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 no-proxy-arp route-lookup inactive access-group inside_access_in in interface inside access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz access-group global_access global route dmz 0.0.0.0 0.0.0.0 172.16.0.254 1 route inside 0.0.0.0 0.0.0.0 192.168.1.254 tunneled timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy server-type microsoft user-identity default-domain LOCAL aaa authentication enable console LDAP_SRV_GRP LOCAL aaa authentication http console LDAP_SRV_GRP LOCAL aaa authentication ssh console LDAP_SRV_GRP LOCAL aaa authentication serial console LOCAL http server enable 444 http 192.168.1.0 255.255.255.0 inside snmp-server location Vienna crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto map dmz_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map dmz_map interface dmz crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=leela proxy-ldc-issuer crl configure crypto ca trustpoint ASDM_TrustPoint1 enrollment terminal crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable dmz client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 no ssh stricthostkeycheck ssh 192.168.1.0 255.255.255.0 inside ssh timeout 30 ssh key-exchange group dh-group1-sha1 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.254-192.168.1.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept dynamic-filter updater-client enable dynamic-filter use-database ntp server 192.168.1.10 source inside ssl trust-point ASDM_TrustPoint0 dmz ssl trust-point ASDM_TrustPoint0 inside webvpn enable dmz no anyconnect-essentials anyconnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 1 anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 2 anyconnect image disk0:/anyconnect-linux-3.1.05170-k9.pkg 3 anyconnect image disk0:/anyconnect-linux-64-3.1.05170-k9.pkg 4 anyconnect profiles AnyConnect_client_profile disk0:/AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy DfltGrpPolicy attributes default-domain value group-policy GroupPolicy_AnyConnect internal group-policy GroupPolicy_AnyConnect attributes wins-server none dns-server value 192.168.1.10 vpn-tunnel-protocol ikev2 ssl-client webvpn anyconnect profiles value AnyConnect_client_profile type user group-policy portal internal group-policy portal attributes vpn-tunnel-protocol ssl-clientless webvpn url-list none username tunnel-group AnyConnect type remote-access tunnel-group AnyConnect general-attributes address-pool VPN-Pool authentication-server-group LDAP_SRV_GRP default-group-policy GroupPolicy_AnyConnect tunnel-group AnyConnect webvpn-attributes group-alias AnyConnect enable tunnel-group Portal type remote-access tunnel-group Portal general-attributes authentication-server-group LDAP_SRV_GRP default-group-policy portal tunnel-group Portal webvpn-attributes group-alias portal enable! ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 ! prompt hostname context no call-home reporting anonymous hpm topN enable : end no asdm history enable

Can someone please help me solve this problem?

When I tried to solve this I didn't choose which interface the Packet Tracer?

The interface inside or DMZ interface? Inside, he says it will not work with the dmz but the error did not help me

Anyone here knows why it does not work?

screen_shot_2014-08 - 12_at_16.34.57.png

screen_shot_2014-08 - 12_at_16.33.06.png

Hello

Inside LAN is directly connected to the right firewall VPN... then I don't think you have to have the itinerary tunnele... can you try to remove the road tunnel mode and check.

entrance to the road that is static to achieve 10.10.10.11 as its display is correct...

Route by tunnel watch also with 255 administrative distance. I've never used that in my scenarios... lets see...

Concerning

Knockaert