Telnet leads me only to "User Mode" not for Privilegded

Similar Questions

• Allowing only certain users (or groups) make profile changes

  Hello
  
  I work on a requirement here that has the following scenario:
  -Permanent employee cannot change their own attributes through my account profile
  -Employee can change their attributes through my account profile
  -Permanent/temporary employee Type field values are
  
  So, we follow the steps:
  -Created 2 groups of users on IOM (permanent and temporary)
  -Definition of membership rules that checks the Employee Type attribute and add the user automatically to a group of IOM (permanent and temporary)
  -Set up permissions for object data, form = users and unchecked "allow Update" the temporary group. I have not configured for the Standing Group
  
  Test 1:
  -The end user test is part of the Group standing (and all USERS by default. It cannot be deleted)
  -Login as the end user test and on his family name change
  Performance(1):
  -The name has been changed, but should not
  Pharmacodependance1: I have implemented only the temporary group to be able to change this IOM should block this change request
  
  
  Test 2:
  -J' deleted user test by the Standing Group and only all USERS, which is by default on the left
  -Set up permissions for object data, form = users and unchecked "allow Update" for the group all USERS. I removed the other groups
  Result 2:
  -It worked! I could make no change because the group all USERS cannot change their values (update permission is not checked)
  Problem2:
  Am I misunderstood the real meaning of the data object permissions? Why it worked for all USERS but not for other custom groups?
  
  Concerning
  Hugo

  It is a common use case. The classic solutions to this problem are the following:

  1. create a custom menu item or a custom user interface. Not bad work but also a lot of flexibility.
  2. change the OOTB JSP to get the features you want. Some work and IOM upgrade issues but less work than option 1.
  3. apply the update of the USR form as a resource object. You can access the workflow approval etc.. Not that much work. He must find a way to stop users 'HR reliable source' ask the object (or implement an automated system of rejection)

  Hope this helps
  / Martin

• My wife is the administrator user and she forgot her password and she did not save what we can and there are only standard users on this PC, what can we do?

  My wife is the administrator user and she forgot her password and it does not back up and there is only standard users on this PC, what can we do?

  If your wife was using his account with "computer administrator" privileges, and then use the built-in account named "Administrator".

  By default, the built-in account named "Administrator" doesn't have a password.  If you have XP Pro, you can access the administrator account (with no other connected users) Welcome screen by pressing CTRL + ALT + DELETE twice to bring up the "classic" logon window  Enter the administrator user and leave the password empty box.

  In XP Pro or XP Home, you can access the administrator account by restarting mode without fail (repeatedly press F8 to leave immediately after the computer starts / restarts; if you see the Windows logo, you waited too long and you will need to try again).  Once Windows starts in Mode safe mode, the administrator account will appear on the Welcome screen.

  Once you are in the administrator account, go to control panel > user accounts to reset the password of an account with "computer administrator" privileges or create a new user account with privileges "computer administrator."

  If the password that you lack to the built-in, ' administrator' account politics of Microsoft for these forums forbid us to provide you with any information that might help you to bypass this password.

• SSO allows only local users of OS and not?

  We are small: 3 guests with about 40 virtual machines.  I only need a server to do all my stuff vcenter, and that's how I ran through 4.1.

  I intend to do a simple install, during the upgrade to 5.1.  I'd do it rather _not_ deal with Single Sign-On Donostiarra, adding and according to my Active Directory if I can help it.  Reading of the vSphere vCenter Server 5.1 Upgrade Guide ESXi, around 30-31 pages, it appears I can indeed just use SSO with local users and not need to discover AD at all.  Here again, it is not exactly clear to me.

  Here's what he said:

  Page 30-31

  How vCenter Single Sign-On affects vCenter Server upgrades:

  When you upgrade to vCenter Server 5.1, the upgrade process installs vCenter Single Sign On first, then upgrades vCenter Server...

  In vCenter Server 5.1, so vCenter Single Sign-On is... on a computer that is joined to an Active Directory domain, Single Sign-On will automatically discover the existing Active Directory domain and add it as a source of identity for the process of installing Single Sign-On. If the Single Sign-On is not running on a virtual machine or physical machine that is in the same domain as Active Directory, you must use the vSphere Web Client to connect to vCenter Server and add the Active Directory domain to single SignOn.

  If you install vCenter Single Sign-On and vCenter Server on the same physical or virtual computer, Single Sign-On recognizes existing users of local operating system. After the upgrade, you can connect to vCenter Server with a local operating system user ID.

  In vCenter Server 5.1, the term ' OS local users "refers to users the machine host Single Sign-On instead of the host to vCenter Server or virtual machine. After the upgrade, so no super Admin does (the administrative user or group for the root folder), you must provide a valid user or group as a super administrator during installation.

  So I can just be local admin user on my server vCenter Server, install the SSO, then the rest and make?  No need to attach the AD?

  PS: my current vCenter 4.1 server is indeed a member of our AD (Windows Server 2008), but it's mostly just do WSUS and others.  I do not AD require otherwise.

  TL; Dr: Yes your assumption is correct, local users are working with SSO, it is not necessary for users of the AD.

  long version:

  I would still install it as a domain user, if Autodiscover fails, don't bother on this subject. As long as you use install Simple (I rather advise you to install the components one after the other) or install SSO in basic Mode, you will be able to use your local users.

  If you ever decide you need users AD they can always be added at a later stage.

  If you install SSO without using Simple install do not forget to install basic as Multisite mode and Mode HA do not support the local system users.

• Firefox 14.01: Java Plugin appear on behalf of administrator only, not for user accounts - how to fix?

  I wasn't using the java plugin for a long time.

  At some point in the past, the plugin java (that I had turned off for years) is COMPLETELY DISAPPEARED from the list of plugins and addons Manager list NORMAL user accounts.

  It is ALWAYS AVAILABLE on the ADMIN account, but is seriously not intended to be run from there.

  Sysinternals sysmon, is to observe that the java runtime registry entries are located since firefox running in user mode. The java runtime (not the absolute last version, but enough to day 1.7.0_01) is correctly installed and running (for any local application of the IDE).

  The questions:
  -How can I fix this situation?
  -How Firefox does not recognize the java runtime (in detail)?
  -How can I avoid this problem for future updates?

  Additional info:

  Protocol of activities of firefox in admin mode to access the java plug-in:
  http://harryboeck.dyndns.org/Verschiedenes/Firefox-Java-troubleshooting-superusermode.PNG

  Protocol of activities of firefox in user mode access the java plug-in:
  http://harryboeck.dyndns.org/Verschiedenes/Firefox-Java-troubleshooting-usermode.PNG

  Notice the difference: in administrator mode, after accessing HKLM/.../JRE, it goes directly to open 'npdeployJava1.dll '. In user mode, it makes mystical headstands in vain to access some mime base, but does not even touch the dll at all. Should this have any meaning?

  You must first update the Java plugin. Older versions have been blocked since Firefox due to a serious security problem, so update should help. Let me know if you still have problems (make sure that you uninstall any previous version)

• Could not start service windows drivers Foundation-User-Mode Driver Framework on the local computer, error 31: a DVICE attached to the system does not work

  When I go to start the Service for Windows drivers Foundation I get the following error message, cannot start service window drivers Foundation-User-Mode Driver Framework on local computer, error 31: a device attached to the system is not functioning

  I was not able to find an answer in help

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you can disable the WDF Service.  It will be one less point to start your system and will not not just sitting there working day and night with nothing to do.

  On some systems, if WDF is activated, you can begin to see some errors of svchost.exe like this:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  The best solution for this problem is: disable the WDF Service.

• Windows does not start successfully - only in safe mode.

  I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system.  I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully.  Only in Safe Mode.   When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.

  Required reading:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284

• After you have installed SP3 (on XP with SP2), the PC does not restart in normal mode, only in safe mode

  After you install SP3, PC does not restart in normal mode, only in safe mode, without giving a clear indication of what is the problem or how to fix it - other than say to check settings in the Panel (not very useful).

  PC is a Compaq Presario desktop with AMD processor, model #: SR1720AN product #: EL540AA-ABG

  I reinstalled the operating system recovery disks, which reformats HD and installed XP with SP2.

  I then installed the SP3 from a flashdrive (361 MB files). Everything went without hiccups, but final restarts, he won't get to normal mode, safe mode only.

  I did it twice.

  Any ideas? Thank you.

  Here are the specifications of your desktop Compaq Presario SR1720AN. According to the specification, this model comes with a processor AMD and Windows XP Home Edition SP2 installed at the factory. According to your description, it seems that the HP recovery discs may have been poorly photographed for an AMD-based computer. Please see this Microsoft article and this HP document about your problem.

  To solve your problem, please reinstall Windows XP SP2 by booting from your HP recovery disks. After Windows XP SP2 is complete restored and that your computer is operational, download the "Windows XP SP3 with AMD CPU upgrade utility." Run this utility, and then restart your computer. Then download the "Windows XP Service Pack 3 Package of Network Installation" for it professionals. You can also try to use the SP3 Installer on your USB. Install the update to Windows XP SP3 and then restart when you are prompted to.

  This solve your problem?

  Please send BRAVO

• NICs not appearing only in normal mode and wireless not work not (witness still on orange)

  Hello all and thanks to anyone who responds! I'm pretty clueless when it comes to computers, so I hope it's just something simple.

  I am running Windows Vista Home Premium with a Presario F700. The processor is AMD Athlon X 2, processor Dual-Core TK - 55 1.80 GHz. 958 MB RAM and 32 - bit operating System.I don't know if you need this information but better safe than sorry. OK for the problem.

  The computer is supposed to be wireless, but I cannot make it work. When I go to Device Manager in a single Normal boot device shows. It is said: NVIDIA nForce 10/100 Mbps Ethernet #2. I'm not sure what that means, but he says that this device does not work correctly. I couldn't HP Wireless Assistant to work so I followed some advice that I've seen an uninstalled but that did not help at all. I'm sure that's not my firewall is disabled. And I use Norton Security, but I don't know which is not affecting him either since it was a problem before I installed Norton.

  Also, if I boot mode safe more things highlighted in Device Manager. For example, it shows these: card 6TO4, isatap.hsd1.fl.comcast.net, NVIDIA nForce 10 / 100 Mbps ethernet #2 miniport (IP) wide AREA network, wide area network (IPv6) WAN miniport, miniport Wan WAN (L2TP), miniport WAN (PPPOE), miniport Wan WAN (PPTP). But only in Safe Mode. Even if I try Boot Mode safe mode w / Networking they always disappear and it's the only one. I have tried everything I know how to do but I'm at a loss as to what prevents it from loading the Normal start.

  On a side note, someone said to make sure that the adapter is enabled in the BIOS and I checked and the only thing remotely sounding like a NIC is enabled. He wasn't that anything listed in the order of boot on an adapter until recently, and it's at the bottom of the list with an exclamation mark next to it. However, the exclamation point is now gone, but NIC is always at the end of the list. I also ran the check disk thing, and he came back fine. I ran a full scan of the system without any problems but a few tracking cookies. I tried to uninstall in safe mode and start back to normal to leave the computer to reinstall without success. I also used the option reset back to the factory. While time consuming which did not help either.

  If anyone has any ideas as to what I can I would be very happy. I'm hoping to give this computer to my brother as a Christmas gift. Sorry for the long post but I wanted to make sure I was as complete as possible to save everyone time. Thanks again. And if I missed any information please let me know and I'll fix it.

  If reset you to factory, it should work.  It is a switch broken (I don't him think) a motherboard problem or probable internal problems with the wireless. Take it to a store because it is a common problem with these computers.

• Discover Setup RSA for Internet users is NOT only internal users

  Discover Setup RSA for Internet users is NOT only internal users

  Yes, that might work very well.   No, the software of RSA information would not be repeated between brokers.

• DBMS - data not visible for read only account users.

  I created below to know the status of my lots which run on server every Sunday.
  
  CREATE OR REPLACE VIEW CAFDB_REFRESH AS
  SELECT
  log_id,
  owner,
  TO_CHAR (log_date, ' ' DD-MON-YY HH24:MI:SS) TIMESTAMP.
  job_name,
  status,
  ERROR #.
  run_duration,
  INSTANCE_ID,
  additional_info
  Of user_scheduler_job_run_details;
  
  It works fine and I am able to get the information.
  now, to make it visible for read only account users - using «grant select» I gave access and created also means public.
  
  but it shows only the names of columns in read only account data.
  
  How to make this visible to read only account?
  
  Please guide.

  Views USER_ will have only the objects owned by the user executing the query... In your case, it will be only schedules made by the user.

  You will need EU ALL_ or view s/n (all_scheduler_job_run_details)

• 13 "Macbook Pro (mid-2012) starts only in safe mode.

  My macbook OS 10.11.4 recently close and wouldn't turn on after an electrical fault at the club I was DJing. The next morning, I disconnected the battery and plugged it back. When I turned on the PC, he gave the kernel panic and would only turn on in safe mode. I tried to go to recovery (command-R) mode, but that does nothing, when I start my computer.

  What happens here? How can I fix? Help, please

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• What device does support these drivers: driver in user mode WUDFRd.sys, miniport driver AMD multi-vendor, driver Windows Driver Foundation-user mode?

  I'm having a lot of problems with my computer because of those mistakes: I have these drivers but don't know what they take over pilot mode-user WUDFRD.sys, multi-vendor AMD miniport driver and driver windows driver foundation - user mode.  It states that if I no longer use this device to remove.  I don't know which device this is for on my computer.  Someone can help me.  Yes I know nothing about computers on this level.  I only know that I lost a computer and I don't want nor can afford to lose this one too.

  Also I have errors on the following reports: iexplore.exe version 9.0.8112.16464 has stopped working.  I need a PnPDriver (States is necessary).  I hope someone can help me with these problems.  Thank you for your time and your consideration.

  Hello

  1. What is the full error message?

  2 Windows operating system is installed on the computer?

  WUDFRd.sys is a Universal Disk Format (UDF) file system driver that Windows uses to read CD/DVDs in the UDF format.

  Multi-vendor AMD driver Miniport is a type of device / integrated module is an AMD processor-based motherboard or video card AMD (ATi).

  For more information about the Windows Driver Foundation-user-mode driver - see the link:

  http://msdn.Microsoft.com/en-us/library/ms810052.aspx#wdf_intro_topic4

  Also check out the link and follow the steps in the article to resolve the problem with Internet Explorer.

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-problems-with-Internet-Explorer

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• User did not log on type on this computer. __

  the problem: I recently tried to add parental controls to my sons computer in his bedroom... He was the only user configured on the machine at the time where he was as "administrator." As you know I couldn't put parental controls on an administrator account. I created another account, 'Daddy' and in fact the "administrator." Then, I removed my son's account administrator privileges. Big problem... Now my 'Daddy' account will not appear in the journal. At all times that try cange or add a user or do something that requires administrator privileges, we get a prompt to enter the administrator password. It shows even the picture that I assigned to show the account... When I enter my password, I get an error message that says that 'user did not log on type on this computer. I've done everything I can think and read several web pages FOR HOURS! Everthing returned to the aministrator one password ends with the same message. I tried LG in safe mode and not the "Dad; account is not present. HELP...

  Hello, trimmerda

  Because you are unable to access an administrator account, unfortunately there more that we cannot do nothing because we cannot help to circumvent security.

  You can back up your personal files and reinstalling Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I load profile TEMP user Mode?

  Yesterday my laptop charge mode Temp - I got distracted and never delivered on.  I was able to access all I need and proceeded to work on it all day.  Today, I am unable to access the project I was working on this that it is stored in C:/users/TEMP/that does not appear under directory.  (Only the mine and Public) I should have no restrictions as I am only one user on PC (Administrator rights) anyone have any ideas as I know, the files are there somewhere and certainly saved them.

  Thank you

  F

  fiona99 wrote:

  Yesterday my laptop charge mode Temp - I got distracted and never delivered on.  I was able to access all I need and proceeded to work on it all day.  Today, I am unable to access the project I was working on this that it is stored in C:/users/TEMP/that does not appear under directory.  (Only /mine/ and / public) / i should have no restrictions as I am only one user on PC (Administrator rights) anyone have any ideas as I know, the files are there somewhere and certainly saved them.

  Thank you

  F

  Or temporary profiles that not their content is saved.  You have warned that this would be the case when you were informed that you were using a temporary profile.

  Bruce Chambers

  Help us help you:
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

  http://support.Microsoft.com/default.aspx/KB/555375

  They who can give up liberty to obtain a little temporary safety deserve neither liberty nor safety. ~ Benjamin Franklin

  A lot of people could die rather that thinking; in fact, most do. ~ Bertrand Russell

  The philosopher never killed the priests, while the priest killed a large number of philosophers.
  ~ Denis Diderot