What device does support these drivers: driver in user mode WUDFRd.sys, miniport driver AMD multi-vendor, driver Windows Driver Foundation-user mode?

Similar Questions

• What devices are supported for an Adobe Air application?

  What devices are supported for an Adobe Air application?

  A BlackBerry app created with Adobe Air (Air 2.5) work on a BlackBerry 9900 for example?

  Thank you.

  Only phones PlayBook and BB10

• WSD Print device does not have a driver

  Help!  I have a new Pavilion of HP with Windows 7 Professional 64-bit Edition.  I'm trying to install a HP Officejet 4500 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  There are other the home computers running Windows 7 that are able to connect and print.  Unfortunately, my son lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I have completely restarted (with assistance from HP Support) the new operating system for laptop to factory settings and still am exp eriencing the same problems.

  Can I go to a friends house and the laptop will detect and install this printer with absolutely no problem... What should I do?

  Hello leo.choo,

  These are the drivers that are available for the HP OfficeJet 4500 printer.

  I see that there are two models of printers. I don't know which version you have printer HP Officejet 4500 G510g all-in-one or the 4500 G510n all-in-one HP Officejet printer. There are separate drivers for every model.

  I suggest you follow the link below, enter your model number to download the drivers for Officejet 4500 Wireless printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3986399

  You can follow the link below to run, download and run the utility:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&LC=en&DLC=en&product=3986399&tmp_track_link=ot_search

  Or alternatively, you can download the drivers for the Windows 7 computer that works on another computer and use a thumb driver to copy on their computer and install it.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Help! WSD Print device does not have a driver

  Help, please! I have a Dell Inspiron N7110 with Windows 7 Home prem oa that I try to install an epson stylus nx420 printer via a wireless router.  The computer detects the printer, but then gives me the error under Troubleshooting in devices and printers that the WSD print device does not pilot and therefore will not be installed.  .  Unfortunately, my mother lost the printer installation cd so I downloaded the drivers on the internet and still get the above message. I tried even to connect the printer directly to the laptop and the laptop does not show even a usb connection.  I completely rebooted (with assistance from HP Support) the new operating system for laptop to factory settings and still exp the same problems... What should I do?

  Hey Elena,

  Until we provide troubleshooting steps, we would like to know as a result of information from you.

  (1) what is the exact full error message you get when installing the unit?

  (2) have you installed the driver from the manufacturer's website?

  (3) your computer is capable of detecting other connected USB devices?

  You might face this question when the driver installed is not original or if it is not installed correctly. Follow the troubleshooting methods listed below to solve the problem.

  Method 1: Install the printer drivers from the link below, then check the issue. Select the appropriate operating system.

  All-in-one printer, Epson Stylus NX420

  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=151211&prodoid=63087959&infoType=downloads&platform=all

  Method 2: Follow the steps in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link given below for assistance.

  Share a printer

  http://Windows.Microsoft.com/en-in/Windows7/share-a-printer

  Feel free to write us if you are still experiencing a problem. We will help you to come.

• The PC version of Surface RT Windows does support external DVD drives of Wndows 7?

  I just got a Surface RT and try to conect my drive IOmega DVD him fact seeme to be recognized and then disappears. This benefits all on the PC of the Surface. Should I be worried drivers try?

  I searched the Windows Windows RT Compatibility Center and found a DVD player with limited functionality:

  http://www.microsoft.com/en-us/windows/compatibility/winrt/CompatCenter/ProductViewerWithUpdatedFilters?TempOsid=winrt&Type=Both&CurrentPage=0&TotalPages=15&SortCriteria=Relevance&ShowCriteria=0&Compatibility=Works&TextSearch=dvd%20drive&ProductName=dvd%20drive&LastRequested=13&Locale=en-us

  Perhaps more devices will be added...

  This Iomega hard drive is compatible with Windows 7 and 8:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductDetailsViewer?Type=Hardware&Name=Iomega%20REV%20USB%20DVD%20Drive&Vendor=Iomega&ModelOrVersion=33495&Locale=1033&BreadcrumbPath=dvd%20drive%20iomega&tempOsid=win8

  Kate

• What Ms does support instead of UPnP in 2006 and beyond?

  It seems that UPnP is a good service for the previous version of MS windows 7 and before.  The article says that it is not taken in charge since 2004.  My question is what MS offers the place that for now?  Some type of Protocol wireless? Any help is greatly appreciated.

  Hello

  Welcome to the Microsoft community.

  For more information about Universal Plug and Play (UPnP) customer, refer to the link below:

  https://TechNet.Microsoft.com/en-us/library/bb727027.aspx?f=255&MSPPError=-2147217396

  For additional queries on the same, I would recommend posting your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• What system does support Adobe Cloud?  I'm using Chrome, I need to implement?

  What system do you need to use in order to use Adobe Cloud?  I use Chrome.  What should I use now?

  Hello

  You can access the link as follows to check the system requirements for creative cloud.

  System requirements | Adobe Creative Cloud

  Thank you.

• Microsoft does support Music Match since they bought it. It won't work in 64-bit windows program 7

  I prefer Music Match to other music programs, but it won't work in a 64-bit program

  Hi Duane,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not install MusicMatch on 64-bit Windows 7 computer. Please correct me if I misunderstood.

  Duane, I recommend you check out the link http://www.microsoft.com/en-us/windows/compatibility/en-US/CompatCenter/ProductDetailsViewer?Type=Software&Name=MUSICMATCH Jukebox & Version = 10 & Vendor = MusicMatch & local = en . It seems that the application is not compatible with Windows 7. We can try to install the application in Windows XP compatibility mode and check. Do follow the steps in the http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows link and check.

  If you have more questions or if you are having problems with Windows it please let us know and we will be happy to help you.

• Satellite A210-1AO - support SATA2 hard drives?

  I have Toshiba Satellite A210-1AO and I want to spend her hard drive.
  It does support SATA2 hard drives?

  Hello

  Disks hard SATA2 can be used in every laptop or computer with SATA interface. The new SATA2 interface has the same connector and downgrade compatible. This means that SATA2 is faster, but only in theory. Hard drives are not fast enough to achieve these speeds possible.

  In addition there is no limit of capacity on SATA interface you can buy what you want and have fun with the new HARD drive! :)

• HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work code 32

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work Code 32

  The other post:

  HL-DT-ST DVD-RAM GH40L SCSI CdRom Device does not work, another driver can provide this functionality. (Code 32)

  Hello

  1 are there any changes or updates made on the computer?

  2. when exactly you get the error message?

  Code 32: a driver (service) for this device has been disabled. Another driver can provide this functionality.

  I suggest to return the item and try to run the fix it and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Let us know if it helps.

• How to solve 'error display driver - video playback device does not support playback of protected content?

  This message started on my installation of windows 7 media center with the installation of tuner Cable Digital ati a few months.  I had the computer in my office with no monitor for a while and watched TV through my xbox on my samsung ln52b610.  so I decided to connect to the PC directly to the tv and now get this message saying 'error display driver - video playback device does not support playback of protected content'.  the strange thing is that if I go full screen, then new Media Center, here again, it seems to go away (most of the time).  my video card is a 8500gt nvidia with hdmi output and I tried the latest driver from them and still no worky.

  Take a look at the support links that can help solve your problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-TV/protected-content-error-after-a-few-seconds-of/da074c94-e741-E011-9767-d8d385dcbb12

  http://social.technet.Microsoft.com/forums/BG-BG/w7itpromedia/thread/3eea4165-8e37-42b7-A396-62663cc516a7

  If no go, Greenbutton forum would be place to post the question: http://thegreenbutton.com/forums/

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows vista Manager or the device does not recognize the cd/dvd drive

  I have windows vista and it is not recognize my cd/dvd drive. When I click on my local drive (c :)) and recovery hp (d) shows up, I checked my device manager and nothing shows here either for my cd/dvd drive, so I checked the cable but it looks fine.) checked the files of the upper and lower register, but that fact so I just bought a dvd burner external made by polaroid that is USB2.0 and supposed to be plug-and-play, but when I connect it nothing happens nothing. the power turns on two cd players and the disc starts to spin but it stops after 15 seconds and I get nothing. I am confused and don't know what to try. Please help thanks. so I tried to use the running microsoft dvd set and the message I said 'dvd cd drive not detected '.

  I tried these steps with no luck

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hello mike salinas.

  1. you have any third-party burning software installed on your computer?

  2. have you checked if the external CD drive works on another computer?

  I suggest that you check if your internal CD-ROM drive is detected in the BIOS.

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer, but before I get to the BIOS to start Windows. Check to see if there is the CD/DVD drive in the BIOS.

  You can see the article for more information about the BIOS:

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Regarding the external CD/DVD drive, I suggest you see if it works on another computer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Computer does not recognize the driver for HL-DT-STDVDRRWGSA-H2OL ATA Device

  original title: HL-DT-STDVDRRWGSA-H2OL ATA Device

  its as it disappeared from my machine. the computer will recognize the pilot but but the drive does not appear when I go to computer file. If you insert a cd in the drive, it runs but can not read the cd/dvd.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• VMware Vista support physical disk device does not not for some VM.

  I handle Win2k8 64 bit vm on esx5.5 Update 2 which are evidence of "Disk of Vista VMware help" have the error "this device is not present, is not working properly or is not all its drivers installed." (Code 24) ». Versions of VMware Tools vary, either 9.4.0 9.4.5 build-1585188, build-1598834 or 9.4.10 build-2068191.

  Google missed most of the time. I can't find any information on what concrete this virtual device is or what it does in particular, except that it may be involved in the creation of snapshots suspended.

  In addition, the device seems to be attached to the vmrawdsk service, which does not exist on the server. These virtual machines were not P2V, they have been created since iso win.

  One guess what it is and how I might be able to fix it?

  I got it on a working server my copy on the file vmrawdsk.sys missing a server well-known, uninstall VMware Tools, restart, reinstall it and restart again. Then the VMware Vista support physical disk device / service vmrawdisk are working normally.