Temperature of CPU acer aspire 5741G

Similar Questions

• Acer aspire 5741G compatible motherboards

  Hello to the community.

  I have an Acer aspire 5741g problem on VGA.

  After years, it does not start and I have a black screen.

  It is a topic that is discussed with several solution drivres and updates to the bios, but I think that my VGA (ATI mobility) put an end to his life...

  so the question is what are the compatible motherbords for my case (5741G) and my processor (intel i3).

  I find that there is a phone for 5742G but I can't find if is it compatible and what is the difference between them.

  Thanks in advance

  Nick

  Hello Nick,

  1. tried to connect an external monitor or LCD TV (60 Hz refresh rate)?

  2 - the motherboard with the Aspire 5741 G reference numbers (in character fat, it's graphics memory):

  MO. PSZ02.001	BD OF THE HAND. AS5741G. HM55. 512 MB. LF
  MO. PTD02.001	BD OF THE HAND. AS5741G. HM55. 1 GB. LF

  3. you can find the exact model like this (example MB. PT401.001):

  

• Acer Aspire x 3400 cpu upgrade

  Hey guys, im wanting to improve my cpu. I have an Acer Aspire x 3400 and 7 GB of ram and have improved the gpu to a GT720 that works very well, I am now looking to upgrade my cpu, nobody knows better that I could buy that would go with stock psu.

  This one (2.9 GHz - 6 carrots - 95W):

  KC. PU202.65T

  CENTRAL PROCESSING UNIT. PHEN II.1065T/2.9G/6x512/95W/E0

• High temperature of Acer Aspire One 725

  Hello

  I just got my new Acer Aspire One 725 and it works very well - however, when I checked what temperatures at which it turns, I'm quite concerned.

  The inactive temprature is about ~ 60 degrees Celsius, and under load, he got to 87 degrees Celsius until I turned it off.

  I tried to disable all unnecessary applications, but which has not helped. The netbook is brand new.

  Ideas appreciated.

  Thank you!

  Fusha, I got this from a review on Notebookcheck:

  "However, under strong charge of treatment in our stress test, the netbook 11.6-inch become considerably warmer. We measured temperatures of 39.3oC (102.7oF) and 43.6oC (110.5oF) for the top and bottom of the base unit, respectively. The palmrest has never exceeded 32.0oC (89.6oF). Our stress test represents an extreme case, but it is nevertheless clear that the quiet cooling system has negative consequences in terms of heat retention when the netbook is under heavy loads of treatment. »

  However, you are much warmer than that. Turn off your computer and trigger a short sound of compressed air in the vent of output. When running, hold your fniger on the exit vent to make sure that the fan actually works. If this does not resolve your problem, a computer store can put a fan nine of your platform.

• Acer Aspire E5 - 471 - 53V1 CPU, RAM upgrade?

  Hello everyone, I'm new here so I hope someone can help me.  I have an Acer Aspire E5-471-53V1 with processor i5-4510U and 4 GB of RAM DDR3 SDRAM and would like to know if I can pass the i7 CPU, if I can what can go to? also, for the RAM which is the limit max, how to choose the frequency, also that the different if I buy 2 pieces 4 GB or 1 single room 8 GB, thanks a lot for any help in advance.  Best regards.

  Listen to http://www.crucial.com/usa/en/compatible-upgrade-for/Acer/aspire-e5-471

  Jack E/NJ

• SWOP Acer Aspire 8735G T6600 CPU to T9550. Will it work? What changes should be made pls?

  Hi guys,.

  I'm very fond of my Acer Aspire 8735 G, T6600 and want to upgrade the processor.

  I've already updated the PC with a 240 GB SSD and 8 GB or RAM.

  I want to do a final update of the processor and read one of the 8735G models came out with a processor Intel Core 2 Duo T9550 (6 MB L2 cache, 2.66 GHz, 1066 MHz FSB, 35 W).

  Is this correct, and the processor can be two-way for the T6600 I have?

  What changes should I do?

  I'm not a tech guy I'd appreciate the lay language please.

  Thanks in advance

  Hello

  Here's the original Aspire 8735 G processors:

• Acer Aspire 5741 G too hot temperature with Debian GNU/Linux

  My Acer Aspire 5741 G would become too hot using Debian GNU/Linux.

  Any ideas on how to get the same cooling effect as with Windows 08/07/10?

  Using Microsoft Windows, it is never too hot and I suppose it has something to do with the control of the fans of the laptop.

  Had no luck with the bios, but it looks like I solved the problem for now.

  For those who have a similar problem, here is my solution:

  1. I installed the driver real official owner of AMD for the ATI Mobility Radeon HD 5470.

  2. I completely disassembled and cleaned the laptop then assembled again.

  Now, I have worked with him for more than 6 hours and I can't have more than 50 degrees celsius in all hearts.

  I think / hope that should do the trick until the end of the lifetime of the laptop.

  Thanks to the community for your thoughts.

• Acer Aspire V5 122p CPU upgrade

  Hello, I have an acer aspire laptop touch 122p V5 and want to upgrade the processor to something higher to 2 GHz, but don't know if its possible or what processor to upgrade to. Any help is appreciated! Thank you!

  Ray257,

  These are the processors we tested on these units, A4-1200, 1250 A4 & A6-1450; looking at literature looks like they could be the limitation as well.

• Acer Aspire V3 - 571G not hot.

  Hello

  I have an Acer Aspire V3-571G53216G50Makk for 3 years now.

  But since it's new it kept to reach high temperatures.

  And when I'm games it comes in close to 100 ° C, which is not good for the GPU & CPU.

  But the problem is that the fan does not spin at 100%.

  Does anyone have a solution to change the fan speed?

  Things like Speedfan, Acer FanController do not work.

  Or if Acer could update FanController program, it would be useful.

  I hope someone could help me

  Greetings,

  David

  Hello

  Well, to my knowledge there no software provided by Acer that could help you control the speed of the fan for your computer. I had some heat issues with my laptop, and some people suggested me to change the thermal paste. I did and I got a temperature much better after changing thermal paste in some applications (notably for the GPU), but in other cases, the only thing I did is to reduce the thermal regulation. For example in AIDA64 extreme stress test usually my CPU was about 2.2 Ghz front at full load (97 C) due to the thermal regulation. After changing thermal paste, my CPU running constantly at about 2, 9 - 3.0 Ghz (97). (I7-4720HQ processor 2.6 ghz) So I had less control but as you can see it the same temperature. Overall is a very good improvement in my opinion.

  Then you can try to change the thermal paste and see if this can help you. However, this idea is not very good if you do not have a good understanding of the computer and also a good guide to how to disassemble your computer.

• Acer Aspire 3830TG-6494 blocks everything at stake, using either built-in or nVidia Graphics

  Acer Aspire 3830TG-6494 blocks everything at stake.

  Symptoms of the accident:

  -happens anywhere out in the first 15 minutes to several hours in a game (no link with the graphic quality settings). Any loss of performance leading up to the accident.

  -seeds and black, with a brief gurgling noise goes from the screen. Fan and power remains lit always works, forcing a hard reset.

  -Occasionally, the screen freezes, lines horizontal green of ~ 1 cm will appear everywhere and a humming noise is output from the speakers up to a hard reset.

  -Rarely, I get a BSOD, or the computer will shut down and restart itself. DMP files obtained do show no consistent presumed cause.

  -Crash will be preceded by sometimes some sounds in the game by cutting. But not always.

  -The only link between accidents, is that I think usually a solution worked just before the accident. (Frustrating!)

  -System crash occasionally in watching videos or something, but only accidents constantly all game.

  I tried the following:

  -Games running using only the built-in graphics card or nVidia GeForce GT 540 M GPU.

  -Underclocking is the GPU (500 MHz and 700 MHz, 672 MHz and 900 MHz) CPU (70% of the power max seting plan) and both at the same time.

  -The temperatures do not exceed 70 c under heavy use, and crash does not appear to be related to increases in temperature.

  -Run the memory diagnostic Windows 7 and memtest86 (no problem found)

  -Execution of diagnostic CPU intel and intel UERX reference that has not caused an accident.

  -Updated all drivers for the latest versions, as well as make them back to the versions recommended on the acer website to download. (Completely uninstalled the graphics drivers before reinstalling different versions) And ensuring that windows update not installing driver updates automatically.

  -the upgrade of BIOS for v1.12, has been stable for a weekend, he returned to crashing.

  -The system seems to be more stable in sleep or in balance mode, but not a lot. I also knew the power adapter because it seems not crashing on the battery for a short period. But I was wrong, and he eventually crashing if hooked up or not.

  Oh and try cleaning w / air, obviously

  I don't play often and used to play older games on the lower quality settings. I'm not overclocking or streaming at the same time.

  Help, please

  It looks like the modules of RAM that came with the laptop were somewhat incompatible with each other in dual channel mode. Comes with a 2 GB and a 4 GB, same frequency but different bar.

  MemtestX86 or windows memory diagnostic found a problem with a stick.

  Computer is completely stable when running with only the 4 GB stick, even under heavy use. Have since replaced by a kit 2x4gb without any problem.

  Wish that I had looked at the problem, while the laptop was still under warranty, instead of assuming that it was overheating.

• Problems with Acer Aspire V5 - 573 G UEFI?

  Hello

  I have Acer Aspire V5 - 573G. Before all the problems start I used Legacy BIOS mode with 10 Windows Pro 64 bit OS. Have the latest BIOS v2.30.

  So, recently, I decide to move from the Legacy BIOS UEFI and reinstalled Windows 10 Pro 64-bit with UEFI mode activated with the GPT partition style. Everything went well with the installation.

  Now I am facing following issues with UEFI and Windows 10 witch, which I didn't in Legacy BIOS mode:

  1. When the laptop goes to sleep and is not touched for a while, I can't wake up to laptop. Press any key on the keyboard or touch the touchpad don't wake it either. Only way is to press the Power button to stop completely and then turn it back on. I don't know if it's something to do with the Windows settings to resolve this problem.
  2. Restart Windows sometimes stop laptop computer. It's really strange... Windows shows it restarts, screen goes black and does not start, instead it laptop shutdown. ??
  3. And when I shut down the system, it is not entirely clear. Often the blue light continues to blink, CPU and GPU fans are always and still closing system entirely to press on the button / stop.

  These issues are somehow related to UEFI, because I had no such problems with the traditional mode and Windows 10. This is starting to annoy me when the laptop stops completely.

  Any help on this?

  Thank you!

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-S7-stuck-in-sleep-mode/m-p/427855#M3432

  http://community.Acer.com/T5/Windows-10/aspire-V5-573G-freezes-instead-of-sleep-irregularly-not/m-p/...

• Acer Aspire ES1 111 M cannot install windows 10

  I can't update my netbook. During the Windows Update 10 WHEA 8.1 (blue error screen) error message and 8.1 windows is reinstalled. I tried several times with different USB drives external used to expand the capacity of the system.

  Clean Windows 10 installation works, but I cannot activate Windows 10.

  I have regular broadcasts with the WHEA error. It was resolved by the CPU power reduction to 95%.

  The Netbook is Acer service already, but the WHEA issue has not been resolved.

  I think back again.

  It does not resemble your ES1 111 M is on the birthday list.

  http://www.Acer.com/AC/en/us/content/Windows10-update#_ga=1.178858663.264310007.1474604665

  You can read my messages in the link below to get the previous version of "November" of Windows 10 ISO and create with rufus USB installation media.

  http://community.Acer.com/T5/E-and-M-series-laptops/disgusted-51-for-Windows-8-1-recovery-disk-from-...

  The link below explains how to clean your disk and clean install Windows 8.1 (or Windows 10).  The topic is on Windows 8.1, but it's the same instructions for Windows 10.

  http://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/TD...

• upgrade processor for Acer Aspire XC - 605G

  I have an Acer Aspire XC - 605G which the motherboard is an MS-7869 VER: 1.0.  With cor i3-4160.   Who core i5 cpu should I go to?

  Thank you

  I think that you can upgrade to i5-4690 but I doubt the difference will be noticeable, you have to compare the two and decide if it is worth the price. HTH.

  http://Ark.Intel.com/compare/80810, 77488

  http://www.CPU-world.com/CPUs/Core_i3/Intel-Core%20i3-4160.html

  http://cpuboss.com/CPUs/Intel-Core-i5-4690-vs-Intel-Core-i3-4160

• Scalability of memory Acer Aspire V3 - 571 G - 9686

  Hello

  There are about 1 1/2 year, I bought an Acer Aspire V3 - 571 G-9686. It came with 6 GB of RAM setup in this way:

  SPD EEPROM (DIMM0) information

  Manufacturer: ston

  Part No.: 56X64D3S13C9G

  Serial number: 146718E64C0018E4

  Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]

  Format: IMM (67.6 x 15)

  Size: 2048 MB (ranks 1, 8 banks)

  Buffered module: No.

  Registered module: No.

  Module SLi Ready (EPP): No.

  Module XMP: No.

  Module XMP 2.0: No.

  Width: 64 - bit

  Ability of Error Correction (ECC): unspecified

  Prefetch buffer: 8 bits

  Manufacturing: Week 10, 2012

  Temperature probe: no

  Heat spreader: Yes

  Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz

  Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz

  TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz

  -------------------------

  Information SPD EEPROM (DIMM1)

  Manufacturer: your technology

  Part No.: I1C1674EV

  Serial number: 000018E64C0018E4

  Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]

  Format: IMM (67.6 x 15)

  Size: 4096 MB (2 ranks, 8 banks)

  Buffered module: No.

  Registered module: No.

  Module SLi Ready (EPP): No.

  Module XMP: No.

  Module XMP 2.0: No.

  Width: 64 - bit

  Ability of Error Correction (ECC): unspecified

  Prefetch buffer: 8 bits

  Manufacturing: Week 23 of 2012

  Temperature probe: no

  Heat spreader: Yes

  Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz

  Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz

  TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz

  ------------------

  So, it's a 2 GB module and one 4 GB. Different manufacture.

  My question is:

  What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB?

  Thanks in advance for any help.

  Kind regards.

  Hello

  You wrote:

  "What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB? »

  In fact, you have 2 sticks of memory 667 MHz. In dual channel, it means to 1333 MHz.

  Specifications of aspire V3 - 571 G-9686:

  Chipset: Mobile Intel HM77 Express.

  Processor: Intel Core i7-3632QM

  Integrated graphics card: NVIDIA GeForce GT 640M - 2 GB RAM DDR3

  You can upgrade up to 8 GB (2x4gb) and Max frequency 1600 MHz. For example: If you install a single stick of 4 GB - 1600 MHz, it is single-channel: 1600/2 = 800 MHz.

• Acer Aspire not start after cleaning the fan and re - paste.

  I need help, I cleaned up my Aspire 5750 was dust accumulated during the last 3 years, I dismounted, clean the fan, re-glued the CPU and put everything back carefully, when I turned on it, the rotations of the fan for a while, then turns off, gets battery (change from orange to blue) but black screen only. What is the fried MB? Please give me some help here.

  I have checked the connections, changed the battery CMOS, tried pressing the power button / stop without the battery and the network for 20 sec.

  Thanks in advance.

  Ironfly. thanks for the suggestion, but I solved the problem by inserting a small file of Scotch (2mm thick) between Mo and the top cover, I got the idea from another post of member's (royrempel) in another thread in this forum found here:http://community.acer.com/t5/Notebooks-Netbooks/Acer-Aspire-5552G-power-light-but-only-a-black-scree...

  Thanks for the reply, it is still very useful when we panic and start looking for a new MB