Templates and access levels

Similar Questions

• Package access DB level and the level of the form

  Hello
  
  Can someone explain me following.
  
  1 is there a difference in syntax when accessing FORMS packets when the package is in DB and fitness level.
  2. why keep us packages at the level of the FORM (Performance)?
  
  
  Rgds
  
  
  sexy

  1. no syntax difference.
  2. If you have forms specific code you can place this code in the form-level-packages and not within a packet of db.

• Levels of security ASA Firewall interface and access lists

  Hello

  I am trying to understand the correlation between the ACL and the levels of security on an ASA of the interface.

  I work with an ASA using both! ??

  Is this possible?

  Assumptions: Any ACL applied below is on the wire of transmission (interface) only in the inbound direction.

  Scenario 1

  interface level high security to security level low interface.

  No ACLs = passes as I hope

  What happens if there is an ACL refusing a test package in the above scenario?

  Scenario 2

  Low security to high

  No traffic = ACL will not pass as I hope

  What happens if there is an ACL that allows the trial above package.

  I have trawled through documentation on the web site and cannot find examples, including the two (using ACL in conjunction with security levels).

  Thank you in advance for any help offered.

  Levels of security on the interfaces on the SAA are to define how much you agree with the traffic from this interface.  Level 100 is the most reliable and 0 is least reliable.  Some people will use a DMZ 50 because trust you him so of internet traffic, but less traffic then internal.

  That's how I look at the levels of security:

  A security level of 1 to 99 always two implicit ACL.  To allow traffic down interfaces of security and the right to refuse traffic toward higher level security interfaces.  100 has a security level IP implicitly allowed a full and level 0 has implicit deny ip any one.

  In scenario 1, if you apply an ACL to deny a security level of 1-99, it will eliminate implicit permit than an entire intellectual property and deny traffic based on the ACL and all traffic.  You create an ACL to allow some other desired traffic.  If this ACL is applied to a security level of 100, he'll refuse essentially all traffic because it will remove the authorization implicit ip any any ACL.  Once again, you will need to create an another ACL to allow traffic.

  In scenario 2, if you apply a permit ACL to an interface of level 0 of security, it will allow that traffic, but continue to deny all other traffic.  However, if the security level is 1-100, it will be all traffic to that destination and remove the implicit ACL (permit and deny)

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Slow connection XP and access to my network places

  People,

  has anyone suffered a slowdown of the connection and access to their favorite network since the installation of a media center?

  After some research, I found that the network drive mapping may be to blame XP checks this before in check (?). So I removed those automatically created my network places and things improved, otherwise he would disappear into the ether for 5 minutes.

  But there is still a delay in accessing the platform thanks to XP. Even if I cancel the drive mapping and it remap, it takes at least 5 minutes to respond. Once it does, and the directory on the hub is open, it seems OK, so there must be a problem with the initial comms that is delay things?

  Curiously, sound when reasonably fast through the web interface.

  Any help appreciated - it slowed all 5 computers on my network to the point where I'm about to turn off.

  Okay, I think I got this insult out.

  Seems XP or media center can not handle if you have many files in the \\mediahub\media\music directory. I had about 2500 files as well as dozens of directories in the music folder. So I moved all the files one level down (a deep folder) as the music folder. Instantly the music opened in about 2 seconds - low 90 seconds.

  I had also turned off file sharing / print and a few other things, but I don't think it helped - I've got turn them back on and see.

  So, the moral of the story is, break your music in folders rather than have a squillion MP3s at the level of the music root folder.

  Hope this helps someone else.

• Access level display APEX 4.2

  Hi all

  In our application, we have two groups of such permission scheme 'Admin' and 'creator '.

  We have added corresponding users in these groups.

  Now we have a search where to click on the button search it displays two different sets resulting i., e.

  1. for research under the branching key, I put as

  

  2. now, in the regions resulting results I provided like this

  

  3 at the same time I had supplied to the security with respect to the Admin and free creator, it would be 'OID_AUTH_MKT_SELF '.

  

  4 based on those from the top results will be extracted.

  5. now there that don't need to use the authorization scheme, a new table named "User access level" was created, in which it provides user input which belongs to i. what access level, e Self Admin, Super Admin.

  6. how I modify reports to display the resulting based on this new array and function of button.

  Apex 4.2

  D/B 10g

  Kind regards

  Sruthitamiri

  So replace it with schema Type "Exists SQL Query"

  And application of power supply as

  select null
  from user_access_level
  where username = :APP_USER
  

  Scott

• request for access level

  There is er_user_groups of the table. ER_USER_GROUPS's username and group_id in form fields.

  This table contains data about all the groups the user belongs.

  If the user is in each groups 29,30,31,32 access level is Basic. Please help me with Sql for this.

  The user could be part of the group more ID but if there is minimum crietira

  Hello

  This sounds like a job for the COUNT function.  Count how many of these groups, each user is in and choose the restaurant where the count is 4.

  Because I don't have a copy of your table, I'll use the table scott.emp (which almost everyone) to illustrate.

  Say we want to find jobs that are each of the evolutionary 10, 20 and 30:

  Job SELECTION

  FROM scott.emp

  WHERE deptno IN (10, 20, 30)

  Working GROUP

  HAVING COUNT (DISTINCT deptno) = 3

  ;

  Output:

  JOB

  ---------

  CLERK

  MANAGER

  It doesn't matter whether or not the same work appears in other departments; only lines whose data deptnos (10, 20 and 30) are considered.

  As Greg said, see the FAQ in the forum: https://forums.oracle.com/message/9362002

• Please how can I create a page based on template and save in the specific folder.

  Please, I spent two days trying to solve this problem.  Here's the situation.  I'm trying to create a Web site for our school.  I created a master template which I intend to use as a base for each teacher's webpage.  I also created folders for each teacher, teachers had to send me their weekly updates what duties inlude, photos and downloads.

  Here's the problem: whenever I have to create a page based on the template of the page is created in the root folder.  There is no way to create pages in the files of specific teachers.  I save the page and try to drag to the respective folder.  When I try to save the file, Dreamweaver he re-recorded in the root folder.  If I try to view the html file in the folder of the teacher that the overview does not load.  I have three books of refernce DW, including the Missing Manual and no of them don't address this problem.  Neither is Adobe.

  Surely someone here created a page based on a template and placed in a folder without breaking all the paths.  Why DW does not provide a way to save a page template based in a specific folder.

  Thank you all for responding.  The problem was that I was using DW on my macbook.  To access save as function I finally understood that you must click on the small triangle next to the name. not the Favorites or recent locations triangle.  Lost two days trying to understand cela.  Incredible.

• Access level of the project

  Dear Dina,
  
  Project management, under setting up a project, I can find the access level given by the choice
  
  Secure and the company.
  
  
  Could you explain the limits for me...
  
  Thank you very much in advance...

  Hello

  Here's what I could find in the Guide to project Foundation, page 13-5

  * Warranty: Indicates that the project is safe. The project can be considered only
  by users with roles to whether or not on the project and by users with
  roles of authority organization. Users with responsibilities that give them a view all the
  update all access projects can also access secure projects or projects.
  * Company: Indicates that the project can be accessed by a user in your
  business, regardless of their role, responsibility, assignment of project or organization
  authority. A role comments menu determines which users of project business information
  can view. Your implementation team can change the role comments menu to increase or
  decrease the amount of users access to business functions.

  Dina

• Root access level control

  In Flash, you can use "_root." to access the top-level items. For example, in Flash if you create a textinput and a new class object function, I can say, _root.textinput.text as below
  
  class MyClass
  {
  public MyClass()
  {
  _root. TextInput.Text = "haha."
  }
  
  }
  
  So my question is how can I access level controls root in Flex?
  I have a list control named, shoppingCartList and I have a newly created class object called shoppingCartObject that will be created at the beginning. And in my class, I have a function which should something like _root.shoppingCartList.dataProvider = product_ary. But in Flex there is no variable of that type as "_root". How can I achieve this in Flex?
  
  Thank you
  

  Example:
  Application.application.shoppingCartList.dataProvider = product_ary;

  You need to import mx.core.application.

  Tracy

• Access level of concurrent query (exit 12)

  Hello
  
  There was a profile option in version 11.5 ("simultaneous access level: request") which allowed you to define if the users were able to view the output of simultaneous queries by other users (within the same responsibility).
  
  We have all implemented exit 12, but found that this profile no longer exists. Does anyone know how (if at all), you can allow users to view the output of concurrent requests by others?
  
  Ideally, we would like to be able to allow some users (System administrators) the ability to view the result of requests by any user in any other liability (IE: without having to assign responsibility that was used for their own user account) is anyone know if that's possible too?
  
  Concerning
  Carl

  This profile option has been removed in R12 and replaced with RBAC features, as described in Note 555524.1 of the ML

  HTH
  Srini choup

• Time Capsule bridge and access point?

  Hello

  I have a question about the network wireless of my TC. Our provider has installed a new router. These router can not work as bridge, telephone and TV are also connected to this router. Because 2 wifi networks do not work, I wonder what is the best set-up for the network? The Capsule is connected to the router by ethernet. It is configured as a gateway. Before I used the TC to connect to internet. Now, I have disabled the wi - fi function and use the ISP connection. It looks good, only backups are a little slow now.

  -What is the best configuration for the TC in an existing network? So that I can put it off the wireless of the TC or the ISP router: can I use the TC-wifi (create a new network) or wifi existing ISP router to connect with wireless devices?

  -Do I lose speed when I'm with 2 devices on my network: TC as the ISP as a router and Access Point.

  (I always thought that 1 unit for router and access point is the best configuration.)

  -Are faster backup copies using the TC wireless or it does not matter when I backup on the wireless ISP?

  Some maybe stupid questions, but thanks in advance. Greetings.

  Because 2 wifi networks do not work

  Many people think that this is the case... but this isn't so.

  You can use several wireless networks... all attached to the same router. There is enough bandwidth available in the channels wireless for the operation of 3 different wireless networks nearby each other... and using 5 GHz adds much more.

  The Capsule is connected to the router by ethernet. It is configured as a gateway. Before I used the TC to connect to internet. Now, I have disabled the wi - fi function and use the ISP connection. It looks good, only backups are a little slow now.

  The configuration of TC in bridge is correct.

  Do not turn off the TC wireless... Provide a different name for the ISP wireless router and connect your computer... then you can get internet and make backups on the TC without overloading the ISP router wireless.

  -What is the best configuration for the TC in an existing network? If I disable the wireless of the TC or the ISP router:

  Turn on Wi - Fi in both.

  A physical configuration, it is recommended to have say separation of 1 M (3 feet) between the ISP router and the TC to a min. But it would be even better to have the TC at near the Mac who performs backups TM and related to the ISP router with ethernet.

• What is the difference between the password and access code

  I get all the IDs and passwords and none are accepted

  "I received message' iPad requires your password after restart", but it does not accept passwords

  What is the difference between the password and access code

  Standard codes which block the iPad are 4 or 6-digit. You can set a more difficult to decode, personalized access code / password in the settings using letter and numbers if you wish.

  A password is a series of numbers, symbols and letters that a user putting in place to protect the information in a frame, a web site, e-mail, etc. This may actually be a word or series of words, if you wanted to set up in this way.

  Your iPad is looking for this 4- or 6-digit code. If you can remember, you must restore the device so for free.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• How can I find and access a record of Mail in Mail El Capitan?

  In Mail on 10.8.5 - when I need to send an e-mail message, that I was able to search a folder, search for a message in this folder, select the message in the search results and then see and click on the name of the folder has resided in - take me directly to the folder nested within the appropriate e-mail account. Now, with El Capitan, it seems that this function no longer exists. How can I quickly find and access the files with in Apple Mail 10.11 El Capitan?

  Are you talking about looking for a folder in the Finder or in the mail?

• When sending emails to the bcc and access to a group, I hit the button send and dates back to the Inbox without sending.

  When sending emails to the bcc and access to a group, I hit the button send and dates back to the Inbox without sending. I even changed users on my pc and it always does.  I closed temporarily add-ons thinking that would help, but did not seem to make a difference.  Can I have a virus?

  Hello

  • E-mail are what customer you referring?

  If you use Windows live mail, then the number you posted is related to windows live and will be much better suited in Windows live forums. Click on the link below.

  Windows Live Solution Center

  http://www.windowslivehelp.com/