Tense and low resolution screen

Similar Questions

• Embedded Fonts and low resolution PDF

  Hi guys,.

  I have Acrobat Pro 9. I've used Acrobat Pro 7 some time ago and it was great to have option of embedded fonts. I read that if I save the PDF file in high resolution (printing for example) fonts will always be integrated. The thing is I want to make a Low Res PDF for the Web but Embedded fonts so that everyone will see the Garamond type I choose or if they decide to print it, they can do it and maintain its design.

  Can I do this?

  Thanks for any info!

  See you soon,.

  SEBS

  In InDesign, just use File > export and choose preset for smaller file size. Which will integrate your fonts (the subsets that would be good enough) and reduce the image color resolution 100ppi.

  If you want it lower, like in Acrobat, go to the "Compression" settings and put them at a lower resolution it.

• Satellite P500 no internet and low resolution after installing Win 7

  Hello everyone :))

  I had a serious virus on my system, so I had to reinstall Windows 7 completely.

  However, I do not just roll back the system to its factory settings. Given that I had a Windows 7 disc I bought much earlier, I decided to use it to reinstall the whole system.

  Now I don't know how to connect to my wireless network (before reinstalling, everything was fine, and I just had to choose my network in the list) and the display settings have changed: the maximum screen resolution is now 1280xsmth, at the front, it was much higher.

  Could you tell me what is the problem?

  Just a question; recover the laptop using the Toshiba or Toshiba HDD recovery recovery disk? Or have you installed a clean Win 7?

  If you have installed own Win 7 then I guess that you didn't install the WLan driver and display driver.

• Advice needed centenarians and hi-res W520 or new and low resolution W530?

  Hello people!

  I'd appreciate your advice and your experience to help me with my contemplation.

  Im a CAD (solidworks, autocad, revit) and graphics (adobe, sony vegas) user, I need a new machine because my x200t do not support the load more...

  I have a limited budget, and I have two options with the same price (of Lenovo in any case):

  A demo version of W520:

  Machine type/model: 42844 MG

  Intel Core i7-2860QM - 2.5 GHz

  2 x 4 GB 500 GB 7200 RPM

  15.6 inches (1920 x 1080 nVidia 2000M 2 GB)

  DVD - Rec

  WiF, cornflower, WWAN

  RPF 9elements color sensor Cam card reader

  Windows 7 Pro 64

  New W530:

  Intel Core i7-3720QM - 4 c - 2.6 GHz

  8GB 500 GB 7200 RPM + 32 GB mSATA

  15.6 inch (1600 x 900 nVidia Quadro 1100 M)

  DVD - Rec WiFi color sensor of fingerprint 4-in-1 card reader

  Backlit keyboard 9 cell cam

  Windows 7 Pro 64

  I would buy something and forget the upgrade for the next 3 years...

  I'd appreciate advice.

  Kind regards

  Gili

  • Do not spend money for the color sensor. Buy a sensor of external color that you can use the laptop monitor and your internal display.
  • Why do you have 32 GB on the W530 mSATA? Go with an SSD as a single disc, or go with an SSD in the main Bay and the HARD drive in an adapter ultra bay. I don't think that the 32 GB mSATA is logical from the financial point of view as a disk cache only.
  • Do you need the cam on the on the W530, which should save money as well.

  2000M (W520) vs... K1000M (W530)

  Both have 192 cores, 2 GB of Ram, bandwidth, same memory, same version of OpenGL, shader model directX version PCI-E generation FP32 and Optimus.

  Differences: K1000M gives you DisplayPort 1.2 and the 2000M is only DisplayPort 1.1. TDP is less than 10W on the K1000M.

  See this pdf to more details.

  For graphics cards will perform more or less the same (W530 could be able to turbo graphics or more processor because of less PDT). You will benefit from the additional performance of the 3720? If so, then I'd go with the W530.

  I normally recommend Win 7 Home Premium and not Pro, since they both will come with a $14.99 to Win 8 Pro upgrade. I guess you want to stay on Win 7, at least until the 8 is on SP1, if not for the life of the machine. So Win7 Pro might be good for you, if you need functionality.

  You what you need to consider is: the processor in the W530 will benefit you more than the screen on the W520 and you prefer one keyboard on the other.

• Content drop-down - low resolution screen Android

  Hello

  Please, I would like to know if the bad results of content on Android screen is a regular solution or can improve this quality.

  Below is a printscreen of advice DPS (Android app), but I did my tests with a PDF portfolio. I put the scrollable as vector and Raster content. Vector, the quality is a little better.

  I guess that native Android apps could be closer to make quality with iPad apps when I use folio PDF.

  Yes, there is a trick to improve this result?

  

  Which doesn't seem right at all, not only your frames of scrolling, but also your main content. Are you sure that the article is PDF format?

  Neil

• Artifacts and low resolution in the poster image

  Hi, I have real problems with poor quality poster image / final, still the video coverage.

  I have a mp4 H.264 that I created in After Effects and inserted using the media panel in the DPS.

  As you see below, he plays on loading the page, and I chose the cover over to be the image of the poster when she ends of in the Panel inlays of Folio. I put the video to stop on the last page.

  When the video stops, you can see all the artifacts around the text that I expect to be as sharp as the original PSD file, I downloaded as the poster image.

  I am doing wrong or is there something that can further improve the quality of the final? Is the same poster displayed image or is it the last frame of the video? (I guess that's the case)

  I hope you can help.

  Thank you

  

  I've sorted it!

  Abandoned altogether the poster image and re-created the elements of the film that I would like in InDesign on the page and the film plays to the end and finally reveals the page under. I was overloading the things.

• Half of my screen has low resolution and/or the contrast that the other half

  Greetings!

  The left side of the screen on my laptop seems normal with a high resolution and brightness, while the right side of the screen seems darker as it has a higher contrast and is more degraded it has a lower resolution... it looks almost like a demo of tv showing the difference between the high and low definition.

  Does anyone have an idea on how to get the screen of the same search on the screen?  The general change the appearance of the screen and return to an earlier date before that I messed up my computer did not work.
  Thanks in advance!

  See you soon!

  Could be a hardware failure on the laptop.

  One thing to try as a test is to start from a 'live' as Ubuntu OS (for example), just start it DO NOT install it. See - http://www.ubuntu.com/download/desktop/try-ubuntu-before-you-install - for more details. This should hopefully allow you to see if the screen works well or not in another OS, if it looks OK in Ubuntu, then its less likely to be a hardware problem. But if the screen is still divided, then unfortunately, it could be a hardware failure.

  Other things to try eventually (in no particular order):

  1. set to update your graphics card drivers to the latest compatible drivers available for your laptop, where they have been corrupted somehow.

  2 - is still divided into 'safe mode' or is it OK to whom?

  3. If you look in Device Manager, it shows errors regarding the graphics/display/monitor card?

  4. There is this fixit - http://support.microsoft.com/mats/Windows_Display_Quality_Diagnostics/ - in the center of MS fixit who can be worth it. But I doubt it.

  5. If this just started recently, try a restore point for just before it occurred.

  Assuming that you have already tried to change the screen resolution and depth etc color settings and then restore the default values, you need.

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• Tecra R850-151 and low screen resolution

  Good afternoon

  I contact you for realizaros a technical issue concerning a model of Toshiba Tecra R850-151, part no 8b112605h PT525E and the serial number.

  I explain the scenario.

  I installed the laptop in a docking station, this one monitor, keyboard and mouse, I installed the driver downloaded from your site for this model of laptop and operating system and you have set up in screen Intel Graphics and Multimedia Control Panel of operation mode screens clones both screens in resolution 800 x 600 and respect me as an administrator entering the mode of operation of the screen and the resolution the bug is when I have access to the system with another user without administrative privileges, in this case the resolution does not respect me and sometimes not the mode of operation of the screens.

  Please faciliteis a solution to this problem because it is essential that the resolution on both screens and the problem is that entering the system with another user respect me when I accepted the turnstile as an administrator resolution and if I change the theme of the screens or judgment as a user when I turned off the computer and turn it on again you ignore the turnstile. Moreover, I installed the OS twice now and the error persists, and I installed the latest driver that you have on the Web, and before as well and always the same.

  A welcome message.

  Hello

  Did you notice this if you want to use the image of preinstalled Toshiba?
  Retrieve the laptop to factory settings by using the HARD drive recovery and test again.

• When you use multiple monitors, my main screen goes to a lower resolution, and I can't change it.

  When I use "extend" the screen on my laptop resolution remains: 1920 x 1080, and the external monitor uses resolution of 1280 x 1024.

  But if I use "duplicate", the two screens are set to 1280 x 720 (despite being different for each screen ratios) and the resolution box is grayed out.

  In addition, for some reason, my laptop screen becomes poster 1 & 2 with the external monitor being 3. There are only 2 screens physically, however.

  How can I get the correct behavior for two copies?

  I know my monitors are not the same report, but I already used this configuration in Windows 7 on my old laptop with no problems. On Windows 7, the external monitor Gets a black bar at the top and bottom to restrict it to my laptop screen 16:9 ratio.

  It's the screen resolution window when I use "duplicate".
  

  When I use "extend" the screen on my laptop resolution remains: 1920 x 1080, and the external monitor uses resolution of 1280 x 1024.

  But if I use "duplicate", the two screens are set to 1280 x 720 (despite being different for each screen ratios) and the resolution box is grayed out.

  In addition, for some reason, my laptop screen becomes poster 1 & 2 with the external monitor being 3. There are only 2 screens physically, however.

  How can I get the correct behavior for two copies?

  I know my monitors are not the same report, but I already used this configuration in Windows 7 on my old laptop with no problems. On Windows 7, the external monitor Gets a black bar at the top and bottom to restrict it to my laptop screen 16:9 ratio.

  It's the screen resolution window when I use "duplicate".
  

  Yes...

  'Duplicate' will do it.  It is not "Duplicate" "sorta show the same thing on both screens.  ;-)
   
  Without third-party applications duplicate screens have the same resolution and the maximum resolution is the maximum resolution of the screen that has the smallest maximum resolution.
   
  Now - if you can be able to use the video device software full to make this (nVidia, AMD/ATI, Intel) in their more advanced control panel - that would be your application third-party in this case.  It would be under the ADVANCED above settings * if * you have installed.  I can't say what gave you what video card you have and if you have installed the complete drivers and the software of the manufacturer of the device or not - but I suggest you to do this and see if their advanced settings might help you.

• Photoshop elements 12 [low (grey) screen where I do my crop settings and set my resolution is gone].

  For some reason any (I must have hit something wrong), the bottom of the screen (gray) where I do my crop settings and set my resolution is gone. The picture is there but losts of border grey, but the fundraising and the resolution went. I really need to get back to work. Thank you

  What operating system do you use?

  If a mac, you can click the Green zoom button to fit the 12 ESP on your screen.

  

  If windows, click expand in the upper right of the screen to fit pse 12 on-screen.

  

• Satellite P100-188: low resolution fonts and menus, game

  Hello

  I have a P100-188 and fonts on the office and Internet icons display very well, however the fonts displayed in message boxes look terrible, looks like they are displayed in low resolution, you can see practically every pixel that make up the letters.

  This is really visible with some games I've played, as UFO: Afterlight and supreme commander. The games look good, but the menus for the said games are terrible.

  Nobody else this remark on their machines and is it current with windows and LCD screens?
  This is my first laptop and my desktop computer is old and it uses a CRT monitor that do not show the same symptoms.

  Hello

  Have you changed your display resolution or even use native resolution 1440 x 900?

  AFAIK P100 has excellent 17.0 "TruBrite discovers Wide 16:10 color TFT display and the illustration is really fantastic. Because of that, I'm a little confused about your ad. To make it better to try to change the font size and enlarge the fonts.

• Games running in lower resolution on the desktop resolution does not fill the screen

  I have a laptop HP ENVY 17 TS with NVIDIA GT 740 M and Intel 4600HD graphics drivers and running Windows 7. Whenever I want to change the resolution in games at a lower resolution on the desktop resolution, the game shrinks to its view, leaving the couple of inches black bars on the edges. For example, if my the desktop resolution is 1920 x 1080 and I want to start a game in 1600 x 900, the game does not fill the screen, instead, it leaves an amount of empty space on the edges of the screen.
  
  In order to solve this problem, I tried the following steps:
  
  I first tried to locate the view tab in the NVIDIA Control Panel in order to define the scale/stretch in "Full screen", but my version of NVIDIA CP isn't the view tab (my NVIDIA drivers are the latest version).
  
  Then I discovered that I should do this in the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Calibration" under display > display settings and it doesn't show the option to retain display scaling that is checked by default and does not change. Also, after searching the Internet I saw that some people suggested entering the 'advanced settings' and try to make changes. When I try to enter advanced settings, under view, it says 'this screen does not support advanced settings'.
  
  After trying without success, I tried the update driver Intel via their website, hoping that it can fix the problem. I ran the small Intel application on their Web site that identifies my chipset and offers me the latest driver for this chipset. Web site told me that the driver is installed on my computer is 10.18.10.3304, and there is an update for what is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried to run, it gave me this error message: "the drivre being installed is not validated for this computer. You can get the correct driver from the manufacturer of the computer. Setup will now exit. "that makes no sense.
  
  After trying the above steps, I'm not able to solve the problem, and I need help from someone who really knows how to solve this problem.
  
  Thank you.

  Solution (I hope)

  1. choose the properties of the graphic (logo Intel) option when you right click on the desktop

  2. go in view

  3. go through the resolutions on the 'Resolution' and change to this resolution (do not click Apply)

  4. for everyone to go to 'Scaling' at the bottom of the screen and change it to scale full screen (do not click Apply)

  5. Repeat until you get back to the higher resolution (that won't let you change the scale).

  6. quickly choose a few resolutions from the drop-down menu to make sure that they have changed their scale.

  I had a problem with some resoultions changing the way they were, but which should solve most of the problems.

• WIndows 7 - can not lower the screen resolution

  I don't know when it happened... apparently, after one of the windows updates because it worked very well, a month or two ago... anyway, here's my problem. A month ago I got the Sims 3 World Adeventures. I installed it and he played wonderfully. I have themselves are involved in the Facebook games and he has not played for a few weeks, but recently decided to go back to the Sims 3. I clicked the shortcut, open Launcher, I clicked on play and my screen went black, then white, then gray, then horizontal strips of red, green and blue, I think that the colors are then complete blue (like the blue BSOD) then he began again, black, white etc. I could alt tab out after a few minutes.  No error message, no beeps and the computer wasn't warm because I had just started before trying to play.

  I'm running on an Acer Aspite Z5600 with touchscreen (its an all-in-one... looks like a monitor etc), Windows Home Premium, 3 gig of ram, op 64 bit, Pentium system dual core, Intel G45/G43 Express chipset. I went to check my graphics settings - the resolution is set in 1920 x 1080 monitor shows a built-in display. I thought that maybe the resolution was causing problems because the Sims 3 do not like this high middle (I never changed it and the game worked before but I thought of one another program may have) when I put the lower resolution and hit apply I had the same changes in strange black on white, etc.. Yet once again, I had to alt tab out... it took forever to do, and my resolution had not changed.  Everything else seems to work fine... my browser and other... I can play some Facebook games and it seems pretty much any game that starts in a window / windowed mode. I changed the settings on the Sims 3 to play in windowed mode and it starts very well (I HATE the windowed mode tho) I decided to do some research and see if I could find a solution later and decided to go play another game, (one of the verizon games I had played before without problem) and he did the same thing as Sims 3 dang. It is a demand pretty weak game graphics-wise (his Poppit to go - even my old laptop can play it.) so having unplayable all of a sudden he had me beat. Color changes look almost like a kind of graphical test. Hope I have not confused LOL thanks everybody for any help.

  I have a reversible temporary solution of 10 steps for this problem, im also using a race of z5600 acer windows 7 and when I try to run anything that changes the resolution of the screen the screen turns black and flashes different colors is a way around this, but you will not be able to use the full screen , and when your done with the game or whatever you will be able to use the full screen new heres how

  1. start

  2 right click computer

  3. click on properties

  4. click on Device Manager

  5. If Conrtol user account appears, click Yes

  6. click on the tab display cards

  7. right click Intel G45/43 Express Chipset

  8. click on turn off

  9. now the display begins to blink and you'll notice that sub-par signifigantly window, you only 3 options for screen resolution size but most of the games will take place and you will be able to see

  10. to make the fullscreen back you will need to follow the same steps as above, then click Activate

  Hope that this help is the only way it would work for me ~ JUZTICE