Terminal Services Mangager/remote control

Similar Questions

• Whenever I connect to a remote connection, I get an error message "unable to connect to this Terminal Server session remote control"

  Original title: unable to connect to this Terminal Server session remote control?

  Whenever I work with my friendly by connecting remotely, this information is pop ups as follows:

  Remote control cannot connect to this Terminal Server session. It is a known problem with Windows 2000 and XP and can occur under certain, rare conditions. To remady this situation, ask the local user switch to another session (connecting, on or off), or restart the computer.
  I know it's something related to windows authentication. But want to know in detail about this notification.
   

  Hi Victor,

  The question you posted would be better suited in the TechnNet Forums.

  I would recommend posting your thread in the link below:

  (Services Terminal Server) remote desktop services:

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• Will be Microsoft Terminal Services Client control work on 64 bit XP Prodessional?

  Will be Microsoft Terminal Services Client control work on 64 bit XP Prodessional?

  Hey Joe,

  You can view this question in the TechNet Windows XP IT Pro: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro

  Thank you.

• Can I disable the Terminal Services if I don't use remote assistance/remote desktop?

  I use can I have Vista 32 bit home premium

  I thought that Vista have no remote desktop? Is not Terminal identical remote desktop services?

  When I go

  MyComputer > right click > properties > remote adjustment

  the box for "Allow remote Assisnatnce" is NOT COCHEE

  But when I run Netstat - ano, I see that port 3389 is listening svchost.exe process when I checal what services are related to this particular svchost.exe, I see the following services:

  Cryptographic services
  DNS client
  network location awareness
  KtmRm for distributed transaction coordination
  telephony

  and Terminal Server services

  Seems to be at a point several years ago, I allowed someone from microsoft to help me through the assistance at a distance could therefore have enabled or downloaded services Terminal Server?

  In any case, I think that Terminal Services is initially port 3389 to remain open and thus get an unsolicited connection attempts from different IP addresses.

  I tried a little experiment and finished the Terminal Services and changed the status of manual start-up. When I still ran netstat - ano, he showed no listening on port 3389

  However, when I rebooted my computer Terminal Server was running again. So I ended it again but this time off the service. When I fell net stat - ano he showed terminal services does not. then when I restarted my computer, Terminal Server services do not have turn on port 3389 has not been shown that listening

  SO my question is, as a user of Vista which doesn't use remote help desk or remotely.

  1. I CAN keep the disabled Services Terminal Server?

  2. it cause me any problem of operation or security if she stays in the disabled state?

  3 have disabled will cause me to not be able to get the scheduled updates?

  Thank you

  But I have been informed by Norton Personal asa require a Terminal Server Services be, nit for the part of remote assistance, but for other reasons. They say I can't turn off

• 22D133B: replaced charger DVD - no play, pause, stop, etc via the remote control

  Hello

  I have a 22D1333B in for repair because it would not play the DVD. I replaced the charger DVD (part No. 75040787) and the unit will now play DVDs ok but the DVD section will not respond to the remote control.

  All other TV functions operate via the remote control without any problem. It's just the DVD section.

  I cured the last of them by exchanging the PCB on the new DVD unit with that of the old unit, but this certainly isn't the way to address this problem.

  I downloaded and installed the software on the site of Vestel and updated the software for the Toshiba site. The fault remains.

  Any help to solve this problem would be welcome.

  T.I.A.

  In my opinion the new DVD drive isn't fully compatible with the remote control (type) RC1910 that was included in the box.

  I think you should get in contact with the authorized service provider to fix this

• Windows 8 on HP TouchSmart IQ826t (including REMOTE CONTROL) successfully installed

  Here's the background.  I have a TouchSmart IQ826t running Windows 7.  I have installed on it, (same partition), Windows 8 RTM using a DVD.  The installation went without a hitch and Windows 8 is installed.  I've had two disappointments: 1) the possibilities of contact not only that it was very difficult to slide on the screen side and the only way to scroll from left to right was to use the scrollbar at the bottom of the screen.  (2) turner of the TV does not work, but I am hopeful that it will be the 26 Oct when Microsoft releases the Media Pack.

  Thus, the question that I continued to work on was the touch feature.  I came across an update from HP that I missed for Windows 7 called "NextWindow 1950 Touch Screen Driver Update", which was to improve the answer touch near the edges of the screen and resolved a problem of sensibility in the upper right of the screen.  I downloaded it, (sp49787.exe) and tried to install it.  He would not have installed.  However, the part "NextWindow 1950" of the title was a clue.  I have been looking on the NextWindow site last week and I remember seeing a driver Windows 8 touch screen on their Web site: http://www.nextwindow.com/nextwindow_support/Windows_8_Touch_Screen_Driver.html

  I took a chance and downloaded.  Before you try to install it, I created a new system in case restore point where and then installed.  The installation has maybe 4-5 minutes, but he reported that he managed.  Without having to reboot, I checked the tactile ability and WOW, it works now as my 7.5 Windows phone with lots of scrolling left and right as well as perfect sliding on the side of the screen!  Just to be safe, I restarted and everything works great!  Thus, it seems that the driver on the link above is the solution at least for my model.

  Chuck

  I found how to get the HP Remote to work with my IQ826t! I was reading something and it reminded me that I had never gone through the list of Services on this computer. I found a service that has been extinguished called, 'Human Interface Device Access. I changed the properties of it from manual to automatic. Rebooted and WOW, the remote will now control the Volume, Mute and other functions, he was ignorant. NOTE: Before I tried this service I also found a service called "HP Software Framework. It was also well manually. I changed it to auto - delayed, but I don't think that this has nothing to do with the question. First try the service of Human Interface. I rebooted several times and the remote control of the TV still works. YES!

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Qosmio X 500-Media center remote control

  Hello

  Is it possible to use a Windows Media Center remote control immediately with a X 500?

  Hi regent8,

  I m X 500 not owner but if there is a remote control for X 500 available you can get it from your ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Just give them a call and ask for that. ;)

• Need remote control for Toshiba all-in-One LX830

  Hello

  I recently bought a LX830 11 d for my mother.
  The unit is ex-reparation but don't know if that actually meant to have a remote for the TV feature support.

  If she was supposed to have one then it is absent and dealer is not sure that they are not.
  Is it possible to buy a new remote or if there are compatible options available.

  According to the Toshiba LX830 - 11 d
  Page of the specifications, the remote control Windows Media Center was part of the delivered equipment.
  http://www.Toshiba.EU/discontinued-products/Toshiba-lx830-11d/

  I think that this remote control could be ordered in the Toshiba authorised service provider available in your country.
  Give them a call and ask for this part.

• Need remote control for Satellite A300 1NO

  Hello world!

  I would like to buy a remote control for my satellite A300 1NO, but I have found no information on this tool.

  Most important, it's a remote controls exist for computers laptop toshiba?

  Thank you!
  PG

  Hello

  I started a similar thread about remote control on Satellite A300:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=37732

  If your laptop can be used with the remote control, you should get in touch with an authorized service provider. They sell all spare parts Toshiba and give you more information on this feature. :)

• Qosmio G20-126: remote control and keyboard shortcuts media do not work

  Hello all,.

  I think have deleted by mistake all my HKLM startup. I managed to restore the necessary executables to start manually but it seems to me miss a very important piece of the puzzle. More precisely the file executable (or Department) responsible for the Qosmio multimedia shortcut keys and remote.

  If anyone knows which executable (or service) is responsible for the press shortcuts keyboard/remote control I would appreciate their help to remedy this situation. Also if anyone has the startup configuration by default (see msconfig) to a Toshiba Qosmio G20-126 that would be also a great help for me. Just in case I missed something else.

  Laters,
  Lee.

  Hello

  One question; Why you n t use the tool system restore to restore the OS to the point where you have changed the registry entries?

  It is a simpler method to restore the settings!

  If could also try to reinstall first the common Modules, then the controls.
  This application which you can download from the Toshiba driver page!

• Need remote control for laptop P20

  When I bought my Tosiba P20 was an ex-affichage model and it has not come with a remote control (it was lost). Anyone know where I can get a replacement remote? If someone could know the part number that would be too big, I had a search via google but had no chance to find.

  Thank you
  David

  Hello

  Generally all Toshiba parts, you can order from EPA (Toshiba service partner) in this case I recommend to contact the ASP in your County to order the compatible remote for your device.

  PS: it would be very interesting to know the name of your unit

  Good bye

• BD Playstation Bluetooth remote control does not work with Toshiba BT stack

  Hello!

  I've matched Playstation Bluetooth Sony BD remote control (model: CECHZR1E) with Windows XP SP3 (Spanish) PC last Toshiba Bluetooth Stack v.7.10.12 running.
  But if I press the buttons on the remote does not respond any personal computer.

  I have configured the battery Bluetooth to run the AV and AV service must send commands to Windows Media Player. In Windows Media Player, I have configured to use command AV Toshiba.

  If I press a button on a remote control, with he can link to PC, the icon changes color and Configuration Bluetooth appears the link has been established, but it is the interaction I get this remote control.

  Please, advice that tests should I use or do I have to install any additional software.

  Thanks in advance for your kind attention!

  Ensure that the AV remote control Service is running:
  Right mouse click on Bluetooth-> Options... system tray icon-> [general] tab: 'AV remote control Service' (must be verified)

• Satellite A500-19 x - need compatible part number remote control

  Anyone know the part number for the internal remote control that fits in the toshiba A500-19 x. Anyhelp received with gratitude...

  Hello

  I put t know the part number of remote control that might be compatible with this laptop, but I think an ASP in your country can help you.
  You can buy all the compatible parts of the service partner in your country.
  If the parties are not available so guys will order the head stock Toshiba.

  See you soon

• Fingerprints and the remote control supported on Satellite P100-387

  P100-387 has a fingerprint and the remote? Please, someone answer me.
  Thank you.

  Hello

  To my knowledge, the Satellite P100-387 does not support the fingerprint reader and is not supplied with the remote control.
  But you're right.
  The fingerprints and the remote control are optional and some laptops in the P100 series support fingerprint reader and are delivered with command remotely.

  I also found this site with P100-387 material specifications:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=120514#0