Test before purchase

Similar Questions

• Questions of BitLocker read only not my USB key at startup to test before encryption Win 7 ultimate

  My computer hp laptop has TPM and bios is up to date as far as I know. To be honest, I'm sure that's not bios issue or a USB problem.

  I scoured internet and found the same unresolved issues with no will. For some reason any bitlocker app WILL create a key USB and MPT will be turned on. However, and fortunately, when I leave a test before the actual encryption process, Bitlocker will give me an error code saying that the key could not be detected on the USB after the reboot.

  If anyone of you has a real address and went through this answer please. If you don't know what you are talking about please pass. I just need to run more.

  Thank you and much obliged to those who can solve this problem.

  After deducting - more to guess and pray - I tried two things. Firstly I have updated the bios on the Hp page. To be honest I don't think it was the cure.

  What I think don't have it really that my USB drive has not been formatted to NTFS. Effing Windows says nothing of this during the test before encryption. I strongly advice that this is done before you encrypt, then check the box before you start! USB is in FAT32 or whatever and once I transferred all the files on hard drive and then deleted everything I formatted, it new and transferred all back. I then tried again to encrypt and Windows Ultimate edition finally recognize the encryption key on the USB port and have begun to encrypt - which takes a lot of time on my 500g SSD.

  before to make this mark of course, you delete the previous Bitlocker and TPM key facts of the attempts failed, so you don't get confused. The computer that is known, but unless you wrote, or have a photographic memory, you might get confused as well.* *.

  In addition, I don't know if it would have made a difference, but I reset the Bios to factory settings before the the reattempt and I deleted the password BIOS TPM preceding on the USB as well, so I'm not confused. My system is pretty bone bare, so nothing has been maleffected. Restart the BIOS will ask you if you want to make these changes or not.

  I hope this helps. I know that whenever I'm searching for answers here they never really. Most of the answers just to get out of the people *. See you soon!

• Print a page of test before regionalization resets. Old ink or ink cartridges new cartridges?

  My wife bought a HP Deskjet F2492 in Italy while attending school there.  She needs to get a regionalization reset for US, ink cartridges, now that she is back in the United States.  She has US cartridges and gets a message "incompatible cartridge" with lights flashing when they are installed.  With the US cartridges in the printer, the button cancel and pressing the launch button color print at the same time does not print a test page (it works with the European, but not the US cartridges cartridges).

  I understand that the procedure is to run a test page and obtain the codes corresponding to the 11, 21, 52, 62. and 25.  Then contact HP that will calculate the numbers that must be entered in 5 fields on a dialog box that opens when you double-click on the blue HP logo in the window of the print preferences (Windows 7).

  It's true that we run the test with the new page WE cartridges in the printer to get valid codes (we were led to believe that this was the case)?  If so, how actually print us a test page with the US cartridges since the method described above does not work?

  Thank you for your help.

  The test page can be printed with the cartridges 'old '.  You will need to Contact HP to ask a "regionalization Reset."  I suggest that you do this before you worry about the details of what to print, the agent will take you through the process. Do not charge for this, it is covered under the warranty of the cartridge. You will need to have access to your computer and printer then on line with HP. You will also need to have a set of cartridges for the new region, once completed reset cartridges of region of origin no longer works.  Webpage of HP on the subject is here.

• How to test InApp purchase alt + tst does not work

  Hello friends,

  Please let me know how to use alt + tst to verify In App Purchase applications created by me.

  When I'm following steps (select world icon on the home screen, press alt + tst) nothing happens.

  I test this on some simulators as well as my blackberry 8520 OS v5.0.0.509, world of blackberry app 3.1.0.60 device.

  My problem is now solved.

• Extended search tests before the release of the app

  Is it really possible to test the search extended to an application before the release?

  You mean this:

  http://devBlog.BlackBerry.com/2013/06/search-blackberry10/

  ?

  It should work very well until the application is released. All you need is a target of special appeal. If your application does not appear, it is likely that your target is not configured correctly.

• Tests before publish

  I occupy a site for a festival and I need to add entries to the event at the base of the site which is already online.  What I need to add must be tested by several others, until it becomes to ensure that it is correct.  Any ideas on how this can be done without it to be indexed and found by fans of the festival. I know that I can work on pages and not published then, but he really needs to others, who are not users of Muse to see and check all is well before going public.  Help appreciated.

  Publication of the site as a Business Catalyst testsite. It will cost you nothing and the testsites are not crawled by Google or someone else.

• New generation T vs T61 keyboard (before purchase)

  I had a T. The key on the keyboard, as it is well known, is the best. It was probably a decisive factor for the purchase.

  However, I have read that the new generation of T won't have this keyboard and the tactile has changed.

  Is this correct?

  W machines still retain the T61 keyboard key?

  Thank you

  Mark

  Well, the keyboard is now the island style on all the ThinkPads starting by * 30 series.

  While he feels even better than most other portable computer keyboards, the typing feel has changed.

  The provision has been revised so some T6 * days, so if you're a touch typist you might have some re-learning to look forward...

  Good luck.

• confirmation of windows 7 is genuine before purchase

  1st question, im looking to buy a used computer which has windows 7 installed on it.  My question is how can I confirm the windows 7 key is valid and authentic before I give money and that it has not used elsewhere?

  can 2nd question, if it is legitimate and comes with the installation of the retail media - I move the license to another PC and stop using it on the computer used mentioned above?

  Thanks in advance

  What OS is on the COA sticker that must be applied when the factory installs Windows?  The product key is readable?  It is the operating system you know with certainty who is being held on the PC for life, reinstall as often as you like.

  It is possible that they updated any time at ultimate or a clean reinstall with ultimate detail, but just the version itself is a red flag because it is using a pirate the most.  A good indicator is looking at the ID of the product in Control Panel > system page.  If "OEM" in the string, then it is even more likely that it is hacked, because it means that this supposedly came from the factory and Ultimate rarely does.

  But if he has any OEM in the string, then it is likely to detail that you can read the product key with ProduKey to use to reinstall.  This key can also still be validated by Global Customer Service.

  Finally if still doubts, you can run MGADiag.exe and post again its full report.  If the malfunctioning of button copy try to paste in any case, but if not then follow mgadiag circumvention of report

• Problem installing .ipa on ipad for the last test before submitting to Apple

  Hi all

  After creating the DPS App Builder .ipa I submit to my hollow iPad iTunes, complete the installation, but the icon on the iPad is still disattivated, if I touch the icon below, it seems that the word "install...". "and nothing happen.

  I tried again and again, removing the app, changing the iPad is the result:

  -On iPad with iOS 2 6 - everything works fine!

  -On iPad Mini with iOS7 (version 7.0.4) - does not work

  -On iPad Air with iOS7 (version 7.0.3) - does not work

  -On the iPad3 with iOS7 (version 7.0.4) - does not work

  Well, anyone have any suggestions on this subject? My iPad2 is "for sale" and Monday 23 becomes more :-(, not the chance to properly test my apps on the new iOS7? ! ?

  I am really worry about this.

  Thanks in advance for your kind reply.

  I apologize for my bad English.

  Michela

  Hi Michela,

  This usually happens because your device UDID was not included in the .mobileprovision file used to build the application. Go to the iTunes developers portal and:

  (1) make sure the UDID of your device is listed on the account

  (2) delete the .mobileprovision whether you use your computer

  (3) re - generate the .mobileprovision file and be absolutely sure that there is a checkbox next to your device in the list of devices included in the file

  (4) re - build the application using the new .mobileprovision file

  Step #2 is very important. It is very easy to fail to add the device to the .mobileprovision due to the iTunes user interface. I make that mistake all the time and it drives me crazy!

  Neil

  P.S. Your English was very good!

• G9D66UA: Question before purchase

  Hi I'm going to buy a laptop G9D66UA #ABA model number is 8.1 windows or something can it be upgraded to windows 10 I do not understand the spec and equipment

  Hello

  It's a HP 15-r011dx that comes with Windows 8.1 (64-bit):

  http://support.HP.com/au-en/document/c04272271

  Yes, you can upgrade to Windows 10 for free.

  Concerning

• Before purchasing Windows 7, how can I be assured that my programs will run?

  There are some games that ran more once I got Windows Vista, and now I fear that my favorite games does not load on Windows 7.  I would like to upgrade my computer IF you would set this constant problem with the changes of operating systems... I'm sure that I'm not the only person who is absent from the materials they would like to run on the new OS... Specifically, the programs are:

  Command and Conquer - Generals

  Command and Conquer - Generals-Zero Hour

  Westwood Emperor - battle for Dune

  "IF you would fix this ongoing problem with changes in operating systems...". I am sure that I'm not the only person who is absent from the materials they would like to run on the new OS. »

  There is nobody here leave the monopoly$ oft ivory tower who can hear your plea.  It is a forum 'Community '.  I jumped from Vista, but it is often said that Win7 is the operating system Vista promised to be, even if your old games does not work on Win7 so it should be worth, depends in part on how much life is left in your current computer, if you do not set.

  However, both the Command and Conquer games were released in ' 03, and I think they should work on Vista and Win7, but describe in detail everything that is or is not, is happening when you try to install these games on a Vista installation.
  Games install and not work?

  Battle for Dune - a little more suspicious, but there may still be hope.

  -My thing is - do not install the default - Program Files (x 86) location [in Win7. I don't know if Vista uses the same name.] This allows to overcome 'permissions' and other installation issues that may occur with this one other games. I use another Partition or HARD disk, but a new folder in the C:\ drive and installing games to their own subfolders in that should be.
  While you've heard down the UAC or using "run... as an administrator" to avoid any permissions issue, do not install to the default location goes a step further and is a very useful method for installing the games in my experience.

  -I don't have much faith in compatibility mode, but try installing using XP sp2.
  To install in compatibility mode close the installation/Setup screen after the autorun of CD.
  Then visit - Start/computer and R / click on the DVD drive.
  Now click on Open - and R/click - setup.exe (or whatever the installation program is called. "It will be a .exe) - then properties and compatibility to XP sp2 in this case.
  Check run... as administrator, lucky. Now start the installation directly from setup.exe.

  ----------
  OK - I had a bit of a kick to look and found something that should get CC in Vista/Win7.
  It seems that the big fix for DC is a patch for this game (similar to .config file of parameters) .ini file.
  The post of hijacker54 on page 4 in the link below has notes for this fix.
  Some post down form that - GeekTech2011 has a link to download a complete file - too easy;).

  http://www.SevenForums.com/gaming/40036-Command-Conquer-Generals-4.html
  .

• One last Question before purchase

  I tried to get help the Adobe support of #, but nobody seems to have the answer for me.
  We currently lack Communication Flash on W2003 3 servers. Each has its own dedicated machine.
  The way they are configured at the present time, when you call our script of flv, it sends a call rtmp on our main server, choosing in turn 1 of the 2 coils to serve content. This is handled by a script of action found in applications\controller named main.asc
  
  What I've read so far in these last days, it is similar to the edge/origin solution, except that we are not handling the balance through a router, nor do we run traffic volume to justify that kind of investment.
  
  Another my understanding is that the configuration of the FMS is completely different from the FCS, which brings me to my question, should I expect to be able to reuse my current action script to manage my load balancing, or should I prepare for a new solution?
  
  Again, I'm new to all of this, for your patience and your help is greatly appreciated.
  
  

  FMS isn't all that different from the FCS. I don't think that you will have no problem to run your code on FMS FCS.

• Satellite A100-813: dead pixel - warranty conditions?

  Hi guys,.

  bought A100-813 a few days ago, and screen tested before purchase - unfortunately "white screen" only ;(
  at home when the value 'black screen' - I've seen a dead pixel (one)

  support the guys say one is 'not enough' for repair/Exchange

  I'm looking for claryfing conditions guarantee how much-(un, de plus), where-(Center screen, off-center), pixel/subpixel, etc..) are enough to claim repair / Exchange.

  would appreciate help

  Hey Marcin

  Why you n t use the advanced search in this forum?
  I searched a dead pixel and got several hits.
  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17534&MessageID=64052

• Latitude E5420 headphones/mic combo jack pinout?

  Hi all

  My headset has separate microphone and headphones connectors but my Latitude E5420 came with a single headset/microphone combo Jack. I read on this forum that as the headset buddy adapters should solve the problem, but I could not get any locally to test before purchase.

  I am planning to make my own adapter, but could not find any Dell documentation on this combo Jack, let alone its stitching. Can you guys help me with this, please?

  Much appreciated in advance

  François

  Thanks Jim. I also had an online chat with Dell support, as well as correspondence by e-mail, even sought and obtained feedback from developers, but still no definitive answer.

  Using the fly-wires to connect an open plug a headset I can confirm that the pinout is as given for iPhone here - from the left, right, end to the ground, neck pickup.

  See you soon,.

  François

• display naked video thumbnails of in the

  Subscribed to Adpbe photoshop CC 2015, I test before purchase first adobe PRO, and I can't find in the training videos or help, comments view all

  the images in the video bar, (at the bottom right) as do a lot of video editing tools.

  Can you tell me how to do, thanks

  Mr. Jean-Pierre Bruneau

  Jean-Pierre BRUNEAU wrote:

  Yes it is checked at home, but it gives the first image of some scenes normal example on film of 31'15 five picture that disappear if I zoom?

  That is right. You will see that all of the thumbnails in the timeline panel with zoom to bottom.

  Zoom out

  

  Zoomed in