Test machine

Hi all:

I am building a computer powerful enough to run the nested vspherer hosts and many virtual machines for testing and learning purpose. I would be grateful if you can send your suggestions for the creation of such a computer for example what type of processor, memory, motherboard, graphics card and hard drive.

Best regards.

Here's my setup I use to run nested ESX 4.0 on physical ESX 4.0 hosts guests. I can tell you that it's slow and the nested ESX 4.0 host must be rebooted every week (as well as the virtual machines running on ESX 4.0 hosts nested). I run the nested ESX 4.0 host on local hard disks, and then run the virtual machines running on ESX 4.0 hosts nested to an OpenFiler iSCSI connection - I could never host ESX 4.0 nested runs successfully an OpenFiler iSCSI connection, but they don't run, albeit slowly, to a local hard disk. You would need much better disk storage performance that I have in this configuration (better local or better iSCSI or FC) in order to make a nested ESX 4.0 installation usable for anything other than very light chores. I use nested ESX 4.0 hosts for rapid test of something - more than one use as a disposable ESX 4.0 use an ESX 4.0 Server standing.

http://communities.VMware.com/thread/218140

You can also watch run your nested ESX 4.0 hosts under VMware Workstation 7.0 release candidate.

Datto

Tags: VMware

Similar Questions

  • Executable test sequence TestStand deployment

    Hello

    I would like to automate my test using TS environment and the BT.

    My goal is to have one machine with the development of TS (Inc. LV) for construction of test software that is compiled in one .exe file to run on the tested machine that does not have TS or LV

    Can I use the software for this task?

    It is for the main development computer:














    779601 35

    NEITHER Developer Suite, English, include 3 years SSP

    1

    779602 35

    NEITHER Developer Suite Automated Test Option, include 3 years SSP

    1

    It is for the machines to run the tests on:

    777774-3505 NI TestStand Base Deployment Engine License 5 unit Bundle

    I would like to have an option to monitor the performance of the tests on each machine and if necessary to perform debugging on the tested machine operations.

    If the package above will provide this capability so where can I find the documentation to create .exe files to run on test computers?

    If not, what software will provide this capability?

    Thank you

    His Lev

    Lev,

    These are the correct packages for TS development and deployment.  The only thing is that you have little debugging with the deployment license features.  If you want to debug, so instead of the deployment license they have licensed TestStand Debug.

    http://www.NI.com/TestStand/deploy-compare/

    More about licenses: http://digital.ni.com/public.nsf/allkb/B4B7C4ADB9B21B3F86256D360061891F

    One thing you should realize is that TestStand creates no executables.  Because TS is essentially a scripting language, you deploy the raw files.  These raw files feeding the TestStand engine and execute the steps in order.

    TestStand comes with 10 different (fully customizable) User Interfaces.  What are executables and run above the TestStand engine.  They allow you to run your sequence files (mostly scripts).  You will only need to use 1 of them.  The User Interface is so technically the executable for a deployment machine.

    More information on automation TestStand deployment:

    http://digital.NI.com/public.nsf/allkb/EE3382373D209449862570A5006572F0

    Chapter 14 of the reference manual: http://www.ni.com/pdf/manuals/373435e.pdf

    Interfaces user is in Chapter 1 to chapter of the major components:

    http://www.NI.com/PDF/manuals/373435e.PDF

    I hope this helps.

  • Test product with USB Port

    Hello world

    I'm working on a project that requires testing in the production environment.

    These products have USB Port, and the only way that we can talk to the product is via the USB Port.

    The USB port inside the unit under test uses a USB to Serial Converter of FTDI chip.

    The problem is that every time when a new branch produced on the tester, windows detects it and takes its time to install the drivers, which leads to a long cycle time. Once the drivers are installed, configure the FTDI chip for the description of the product!

    After you have configured the FTDI chip, we configure the microcontroller on the product speaks through the FTDI chip.

    Is there another way this communication could be achieved, I mean using any other platform shipped, or if some how the process can be accelerated on windows?

    Any ideas would be appreciated.

    Kind regards

    Try to add a Windows registry entry:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\UsbFlags]

    "IgnoreHWSerNum04036001" = hex: 01

    0403 6001 and corresponding to the ID of the seller (hex) corresponds to the product ID (hex)

    I used this hack successfully on test machines that go to USB FTDI serial front controller.

    Edit:

    As a side note, if the device is plugged into a different port, Windows will "load drivers" and give it a new COM port.  Take care, he still has the same physical connections and verify the port assignment after replacing the USB hubs, etc. of power failures.

  • OR MAX see GPIB controller/board of Directors, but crashes on test/Scan troubleshooting

    Hello

    I have a new PC (Win7 64 bit) with a new GPIB PCI - E card and NI-VISA 14.0 (later). I can't get the map to 'do' something - he's not troubleshooting auto test, or search for instruments, and the ibfind in an interactive control command does nothing (they are all "don't hang up" no error reported). What is happening with two identical machines, each with the PCI-E card. My 6 monts test machine there is works very well, but it is 32 bit and has a different chipset/firmware of the provider (which was not planned, we ordered the same model, but the seller seems to think that it's little, they kept the model the same number).

    Any ideas on what to do? I demoted NI-VISA a couple of times already, and Windows reports gladly driver card / work properly. GPIB options all seem normal in case of default (GPIB0, controller of system activated, etc.).

    Thank you very much for your suggestions!

    -Rick

    Hi rnelsonee,

    Make sure you also have the NOR-488 driver. 2-day so you can communicate with GPIB devices correctly. You can follow this link to download.

    http://www.NI.com/download/NI-488.2-14.0/4802/en/

    If you still have questions, could you let me know what kind of errors you get when you fail the self-test NI Max? All codes error or screenshots you can provide will be useful. Thank you.

    Paul C

  • PID state machine problem

    Hello.

    I have a problem with my design of State machine and I need help to know what to do.

    I m using a state machine six steps for HVAC test machines. Password-> Idle it down-> Run-> Acquire-> Report--> Shut. Run and acquire the States have PID controls in them (almost identical States) and very fast three-way-valves they´re for the desired control of the temperatures of the water mixture. I m running try to get static values for temperatures and I m satisfied with them, moving to acquire the State to get the data in the report. My problem is that when the race to acquire, PID control outputs from scratch and at that time there static temperatures have disappeared. Worst case is that the tested machine HVAC stops following liquids from bad weather and I start from the beginning.

    Is there a way to tell the PID.vi the release of starting a specific value? In this case, continue to the last value that they released in the State of enforcement?

    I know that scheluding of gain would do (machines would be not closed) but I Don t want to use it because the original problem would still be there.

    Arctic_Fox wrote:

    So PID vi:s remove from the state machine, placing them inside the while loop that surrounds the state machine and leaving all necessary writing DAQmx-functions inside the race and the States Acquire would make corrections on the positions of the valve only on those two States. Right?

    It is a good idea.  I leave the DAQmx functions outside the state machine as well.  If you need to write a fixed value for the outputs when the PID is not running, use the PID that you already have to determine the value to write (output PID or anything else) on/off switch.  In addition, I would make sure the reset of PID entry is true whenever the PID is not running.

  • unit test framework

    Is it possible to group together the Unit Test framework in an EXE?  I would like to pass a path of the project file and path of the report file to an exe file that will reside on a dedicated test server and run tests or user-defined Unit Tests that are included in the project file.

    I want to use this EXE to run automated tests that can be triggered by a CI server like cruise control.

    Is there a limitation with a Toolbox or UTF specifically, which prevents the package in an EXE?

    You cannot run as a stand-alone executable Unit Test infrastructure. He uses a lot of functionality which is part of the LabVIEW development system, but not the LabVIEW runtime engine (for example in order to process the block diagrams, project files).

    What you can do in order to solve your use case is to install LabVIEW on your test machine and run a VI that runs your tests. There are several ways of commissioning and control of LabVIEW, including a command line interface that allows you to pass in a name of VI to run more parameters for the VI. A more accurate way to control LabVIEW would be through ActiveX, which is possible for example in a VB Script or JavaScript that are executed by the Windows Scripting Host.

    This piece of VBScript for example takes 2 inputs command line, start of LabVIEW, charge a VI, passes the values to the VI and run the VI. He will wait for LabVIEW is finished (as an option). You can also choose to keep LabVIEW run all the time, or to have the script open and close as needed.

    Dim oLV
Set oLV = CreateObject("LabVIEW.Application")

sCurPath = CreateObject("Scripting.FileSystemObject").GetAbsolutePathName(".")

Dim oVI
Set oVI = oLV.GetVIReference(sCurPath&"\LVDiff.llb\Diff_VI.vi")

oVI.SetControlValue "Input 1", WScript.Arguments(0)
oVI.SetControlValue "Input 2", WScript.Arguments(1)

On Error Resume Next
oVI.Run(0)
If Err.Number>0 Then
    oVI.Abort
    MsgBox "Error"
End If

    Hope that helps,

    Herbert

  • How can I have a graphical report for another test instead of only for the connection test

    Currently in our environment, we have enabled trends report function so that the connectivity for all test machines, we use the 4.3 BBFE and I noticed that in the CGI - BIN directory, we installed the bb - amcharts.sh and bb - doamcharts.sh of Quest software scripts. My problem is that I can't find any file configuration of this feature, and trying the Script BBserver troubleshooting I found no nothing related to this function.

    Can someone help me please?

    I hope to be clear enough.

    Best regards

    Community in the morning,

    I read the post from Paul O'Brien on the activation of trendig of performance data. At the present time, the solution seems to work only on my RHEL hosts, but for all our Solaris hosts, I don't see any performance data sent to my BBSERVER, expecially, the $BBVAR/perf/$HOSTNAME dir is empty and the newspaper of our BBSERVER and BBclient, I don't see any warning about, here's a bbdef - client.sh which does not , could someone help me solve this problem?

    P.S. the Server/client version is the PE bb4.3.

    bash-3. $00 cat bbc4.30-bbpe/etc/bbdef-client.sh

    #! / bin/sh

    #

    # bbdef.sh

    #

    # BIG BROTHER ZONE DEFINITIONS

    #

    # (c) Copyright Quest Software, Inc. 1997 - 2009 - all rights reserved.

    #

    #

    # LOCAL CUSTOMER CONTROL CONFIGURATION for bb - local.sh

    #

    # WARNING LEVELS AND PANIC TO LOCAL INFOMRAION SYSTEM

    # YOU CAN SET THE VALUES ON A SPECIFIC HELP FILE SYSTEM OF

    # THE etc/bb-dftab FILE

    #

    DFWARN = % DISK # 90 (YELLOW) TO WARN THE

    DFPANIC = % DISK # 95 (RED) TO PANIC

    export DFWARN DFPANIC

    #

    # CPU LEVELS ARE THE MINUTE LOAD AVERAGE x 100 5

    #

    CPUWARN = 150 # (YELLOW) WARN LOAD AVG OF 1.5

    CPUPANIC = # 300 (RED) PANIC TO LOAD AVERAGE OF 3

    DISPREALLOADAVG = "FALSE" # DISPLAY THE LOAD AVERAGE AS FOUND IN AVAILABILITY

    # BB REMOVES THE '.' DEFAULT

    export CPUPANIC CPUWARN DISPREALLOADAVG

    #

    # PROCESS MONITORING

    # THESE VALUES ARE SUBSTITUTED BY THE etc/bb-proctab FILE

    #

    PROCS = 'bbrun' # (YELLOW) WARN IF NOT RUNNING

    PAGEPROC = "cron" # (RED) PAGE IF NOT RUNNING

    export the PROCS PAGEPROC

    #

    MESSAGE # TRACE FILE (/ var/adm/messages or similar)

    #

    # SMM: WHAT'S NEW IN BB 1.4

    # CHKMSGLEN IS SET TO TRUE BY DEFAULT. HE'LL SCREAM IF IT FINDS

    # YEAR EMPTY MESSAGES FILE. BETTER SAFE THAN SORRY.

    #

    # NOTE: Since VERSION 1.8, YOU CAN USE etc/bb-msgstab to

    # CONFIGURE THE VALUES OF PAGEMSG, GSM AND IGNMSGS

    # NOTE THAT THE KEYWORDS ARE SEPARATED HERE SPACE OPPOSITES

    # À « ; » SEPERTATED IN etc/bb-msgstab

    #

    CHKMSGLEN = "TRUE" # MAKE SURE THE FILE MSG IS NON-NULLE LEN

    PAGEMSG = "NOTICE" # PAGE (RED) IF WE SEE THIS MESSAGE

    MSG = "$PAGEMSG" # (YELLOW) WARNINGS ON THE LOOKOUT FOR

    # NOTE: THE WORDS IN PAGEMSG * ALSO *.

    # DEFINE IN MSGS

    IGNMSGS = "" # list of messages to ignore if the string matches the line "

    # define each message

    MSGEXPIRE = "30:60" # EXPIRE WARNINGS IN 30 MIN, PANIC IN 60

    YELLOWMSGSLINES = 10 # return of the XX more recent warning messages

    REDMSGSLINES = # 20 return messages of most recent PANIC XX

    OLDSTYLEBBMSGS = 'FALSE' # don't expire messages found

    # just like the old days (they must be deleted manually)

    export MSGS PAGEMSG IGNMSGS CHKMSGLEN MSGEXPIRE YELLOWMSGSLINES REDMSGSLINES OLDSTYLEBBMSGS

    #

    # Control the color of the dot of cpu when a host reboots

    # Note that the minute definable maximum is 60, anything over will be reset to 60

    #

    WARNMINSONREBOOT = 60

    WARNCOLORONREBOOT = yellow

    export WARNMINSONREBOOT WARNCOLORONREBOOT

    #

    # THIS DEFINES A VALUE FOR IF YOU THINK THAT THE MACHINES MUST BE RESTARTED EVERY X DAYS

    #

    BBTOOMANYDAYSUP = 9999

    export BBTOOMANYDAYSUP

    #

    configuration variables # associated with performance data

    # define as below for processor and disk

    # BBPERFTESTS = 'cpu disk.

    #

    BBPERFTESTS = 'cpu disk.

    export BBPERFTESTS

    #

    # Variables to determine whether the local test should be performed

    # and if so, would you send a msg still

    #

    DOCPU = 'TRUE '.

    DOMSGS = 'TRUE '.

    DOPROCS = 'TRUE '.

    DODISK = 'TRUE '.

    NOCPUCOLOR = 'clear' XX set to "" If you do not want a sent message

    NOMSGSCOLOR = 'clear' # anything else will send a message to BBDISPLAY

    NODISKCOLOR = 'clear '.

    NOPROCSCOLOR = 'clear '.

    export DOMSGS DOPROCS DODISK DOCPU

    export NOCPUCOLOR NOMSGSCOLOR NODISKCOLOR NOPROCSCOLOR

    Thank you for your replies,

    Best regards

  • TEST DL785 32 Core + 128 GB of RAM

    Hello

    We would like to create VMMark environment for big test Machine with kernel 32 and 128 GB of ram.

    In environment VMmark, there are 7 VM I see on Vmwark result for this type of server title 19 or 20.

    Each securities subscription contains the vm 7.

    If I calculate correctly, I have to install VM 140 and I need 1600 GB space for testing.

    Could confirm you this... I need a lot of time to install this environment...

    Thank you

    Ludovic

    There are 6 virtual machines by tile.  So 20 tiles is 6 * 20 is 120 virtual machines

    A tile uses ~ 80 GB drive so that your 1600 GB estimate is correct.

  • My Adobe Reader Plugin does not load in some Machines

    Hello

    I created a Plugin for Adobe Reader 9 and Adobe Reader X.

    In accordance with the license, it must work with the version.

    My plugin to load in Adobe Reader 9 and Adobe Reader X versions only in the development machines and few of the test machines and my plugin works very well in these machine depending on the task, he must do.

    I tried to test my plugin in some machines having the same configuration as that of machines where my plugin was able to load, but I could see that my plugin loaded only in some machines and all the other machine its not load.

    Please someone let me know why this happens and how to solve this problem. I think I'm missing something to load my Plugin, but in some machines, I was able to load my plugin without all the settings other than the copy of my plugin .api file to the folder of the Plugin player.

    Thanks in advance. Please someone help me.

    Everything that you have done with your plugin on MFC or other libraries must be addressed - it's your VC project.

  • pay the license for DBA test dbs

    Hello
    I'm a dba
    I test full import/export for different scenarios, I created something like 6 databases for the test and I will use them for 1 week
    should I pay the license for these 6 databases?

    Thank you

    user9145417 wrote:
    and how can I proof that the guy from oracle audit

    Are you planning an audit?

    They are not omniscient. There is nothing in the software phones "home" to inform them that a new database is running on an obscure test machine. They melt on a person runs a test database on their laptop.

  • MacBook pro mid 2010 kernel panic

    Hi, I have a macbook pro mid 2010 i7 (ID: MacBookPro6, 2) due to randomly crash a kernel panic.

    Does anyone know how to fix this?

    There is the report.

    Thank you.

    Anonymous UUID: EAE9FB95-BC9F-D97E-5767-F1D894197AB6

    Sun Jul 10 12:49:39 2016

    Panic report *.

    panic (the appellant 2 cpu 0xffffff7f8ba41bd5): "panic GPU: 7f [< no >] 3 3 0 0 0 0 3: NVRM [0 / 1:0:0]: error 0 x 00000100 reading: CFG 0xffffffff, 0xffffffff, 0xffffffff, BAR0 0xd2000000 0xffffff9124ec8000 sControl-3.12.8/src/AppleMuxControl/kext/GPUPanic.cpp:127 P2/4\n"@/Library/Caches/com.apple.xbs/Sources/AppleGraphicsControl/AppleGraphic 0x0a5480a2, D0,

    Backtrace (2 CPU), Frame: Return address

    0xffffff9114172c60: 0xffffff80088dab12

    0xffffff9114172ce0: 0xffffff7f8ba41bd5

    0xffffff9114172dc0: 0xffffff7f89584fa4

    0xffffff9114172e80: 0xffffff7f89651add

    0xffffff9114172ec0: 0xffffff7f89651b48

    0xffffff9114172f40: 0xffffff7f898d6a23

    0xffffff91141730b0: 0xffffff7f89675b79

    0xffffff91141730d0: 0xffffff7f8958bcfd

    0xffffff9114173180: 0xffffff7f89589690

    0xffffff9114173380: 0xffffff7f8958b141

    0xffffff9114173450: 0xffffff7f8af216c0

    0xffffff9114173530: 0xffffff7f8af1e9ef

    0xffffff91141735b0: 0xffffff7f8af1f745

    0xffffff9114173630: 0xffffff7f8af1fdbb

    0xffffff9114173770: 0xffffff7f8af20817

    0xffffff91141738a0: 0xffffff7f8af5264f

    0xffffff91141738e0: 0xffffff7f8af533ba

    0xffffff9114173920: 0xffffff7f8af4cd0a

    0xffffff9114173a90: 0xffffff7f8af4d601

    0xffffff9114173ad0: 0xffffff7f8af48e49

    0xffffff9114173b00: 0xffffff7f8af2c30b

    0xffffff9114173b50: 0xffffff8008ee1d22

    0xffffff9114173b80: 0xffffff8008ee299a

    0xffffff9114173be0: 0xffffff8008edfa07

    0xffffff9114173d20: 0xffffff8008997eb0

    0xffffff9114173e30: 0xffffff80088df283

    0xffffff9114173e60: 0xffffff80088c28b8

    0xffffff9114173ea0: 0xffffff80088d2665

    0xffffff9114173f10: 0xffffff80089b8dca

    0xffffff9114173fb0: 0xffffff80089ecc86

    Extensions of core in backtrace:

    com.apple.driver.AppleMuxControl (3.12.8) [3186B630-FFF4-32C9-BAB9-DCD0C9DB6BA2] @ 0xffffff7f8ba33000-> 0xffffff7f8ba46fff

    dependency: com.apple.driver.AppleGraphicsControl (3.12.8) [C57F5F56-2229-365F-9765-F24AA4687 584]@0xffffff7f8ba2b000

    dependency: com.apple.iokit.IOACPIFamily (1.4) [5D7574C3-8E90-3873-BAEB-D979FC215A7D] @0xfffff f7f893b3000

    dependency: com.apple.iokit.IOPCIFamily (2.9) [D8216D61-5209-3B0C-866D-7D8B3C5F33FF] @ 7f8912c000 0xffffff

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f894d7000

    dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [C49819CE - 729A - 36B 2 - 9AC1 - 744A43DC23 6F]@0xffffff7f8ba2e000

    com.apple.nvidia.classic.NVDAResmanTesla (10.0) [05FC5D7E-BB0B-3232-BBBD-8A49B687 0D8B]@0xffffff7f8952e000-> 0xffffff7f897a3fff]

    dependency: com.apple.iokit.IOPCIFamily (2.9) [D8216D61-5209-3B0C-866D-7D8B3C5F33FF] @ 7f8912c000 0xffffff

    dependency: ffff7f8951e000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [1114B99F-E439-329E-876D-1FEC4CF45DF6]

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f894d7000

    com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [CA 56199, 6 - 3C8D - 3EBB - B5EF - 7B1B467 8ACF9]@0xffffff7f897ae000-> 0xffffff7f89a5bfff]

    dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f8952e000

    dependency: com.apple.iokit.IOPCIFamily (2.9) [D8216D61-5209-3B0C-866D-7D8B3C5F33FF] @ 7f8912c000 0xffffff

    com.apple.GeForceTesla (10.0) [84AB27AA-BB29-3476-9810-D93E9B292CE4] @0xffffff7f8a ef1000-> 0xffffff7f8afbcfff

    dependency: com.apple.iokit.IOPCIFamily (2.9) [D8216D61-5209-3B0C-866D-7D8B3C5F33FF] @ 7f8912c000 0xffffff

    dependency: ffff7f8951e000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [1114B99F-E439-329E-876D-1FEC4CF45DF6]

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f894d7000

    dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f8952e000

    Corresponding to the current thread BSD process name: WindowServer

    Mac OS version:

    15F34

    Kernel version:

    15.5.0 Darwin kernel version: kills Apr 19 18:36:36 PDT 2016; root:XNU-3248.50.21~8/RELEASE_X86_64

    Kernel UUID: 7E7B0822-D2DE-3B39-A7A5-77B40A668BC6

    Slide kernel: 0 x 0000000008600000

    Text of core base: 0xffffff8008800000

    Text __HIB base: 0xffffff8008700000

    Name of system model: MacBookPro6, 2 (Mac-F22586C8)

    Availability of the system in nanoseconds: 5073903283714

    last load kext to 788770780706: com.apple.macos.driver.AppleUSBEthernetHost 8.0.1 (addr 0xffffff7f8bbf4000 size 49152)

    Finally unloaded kext to 854604426922: com.apple.macos.driver.AppleUSBEthernetHost 8.0.1 (addr 0xffffff7f8bbf4000 size 24576)

    kexts responsible:

    com Parallels.kext.vNIC 11.2.0 32581

    com.Parallels.kext.netbridge 11.2.0 32581

    com Parallels.kext.Hypervisor 11.2.0 32581

    com Parallels.kext.USBConnect 11.2.0 32581

    com Apple.filesystems.smbfs 3.0.1

    com.apple.driver.AudioAUUC 1.70

    com Apple.filesystems.autofs 3.0

    com.apple.driver.AppleHWSensor 1.9.5d0

    com.apple.driver.AGPM 110.22.0

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.driver.AppleMikeyHIDDriver 124

    com.apple.driver.AppleMikeyDriver 274,9

    com Apple.Driver.pmtelemetry 1

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.GeForceTesla 10.0.0

    com.apple.iokit.IOBluetoothSerialManager 4.4.5f3

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleHDA 274,9

    com.apple.driver.AppleIntelHDGraphics 10.0.0

    com.apple.driver.AppleHV 1

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.driver.AppleSMCPDRC 1.0.0

    com.apple.driver.AppleLPC 3.1

    com.apple.driver.AppleIntelHDGraphicsFB 10.0.0

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.5f3

    com.apple.driver.AppleSMCLMU 208

    3.12.8 com.apple.driver.AppleMuxControl

    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

    com.apple.driver.AppleMCCSControl 1.2.13

    com.apple.driver.SMCMotionSensor 3.0.4d1

    com.apple.driver.AppleUSBTCButtons 245,4

    com.apple.driver.AppleIRController 327,6

    com.apple.driver.AppleUSBCardReader 3.7.1

    com.apple.driver.AppleUSBTCKeyboard 245,4

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 38

    com.apple.iokit.SCSITaskUserClient 3.7.7

    2.8.5 com.apple.iokit.IOAHCIBlockStorage

    com.apple.iokit.AppleBCM5701Ethernet 10.2.0

    com.apple.driver.AirPort.Brcm4331 800.20.24

    com.apple.driver.AppleFWOHCI 5.5.4

    com.apple.driver.AppleAHCIPort 3.1.8

    com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

    com.apple.driver.AppleSmartBatteryManager 161.0.0

    com.apple.driver.AppleACPIButtons 4.0

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 4.0

    com.apple.driver.AppleAPIC 1.7

    com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

    com Apple.NKE.applicationfirewall 163

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

    com Apple.kext.Triggers 1.0

    3.12.8 com.apple.AppleGraphicsDeviceControl

    com.apple.iokit.IOSurface 108.2.1

    com.apple.iokit.IOSerialFamily 11

    com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

    com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

    com.apple.driver.DspFuncLib 274,9

    com.apple.kext.OSvKernDSPLib 525

    com.apple.driver.CoreCaptureResponder 1

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.5f3

    com.apple.iokit.IOBluetoothFamily 4.4.5f3

    com.apple.iokit.IOFireWireIP 2.2.6

    com.apple.driver.AppleHDAController 274,9

    com.apple.iokit.IOHDAFamily 274,9

    com.apple.iokit.IOAudioFamily 204.4

    com.apple.vecLib.kext 1.2.0

    com.apple.driver.AppleBacklightExpert 1.1.0

    com.apple.iokit.IONDRVSupport 2.4.1

    3.12.8 com.apple.driver.AppleGraphicsControl

    com.apple.driver.IOPlatformPluginLegacy 1.0.0

    com.apple.driver.IOPlatformPluginFamily 6.0.0d7

    com.apple.driver.AppleSMBusController 1.0.14d1

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.driver.AppleSMBusPCI 1.0.14d1

    com.apple.driver.AppleSMC 3.1.9

    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

    com.apple.driver.AppleUSBMultitouch 250,5

    com.apple.iokit.IOUSBMassStorageDriver 1.0.0

    com.apple.iokit.IOUSBHIDDriver 900.4.1

    com Apple.Driver.USB.cdc 5.0.0

    com.Apple.Driver.USB.Networking 5.0.0

    com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

    com.apple.driver.usb.AppleUSBHub 1.0.1

    com.apple.driver.CoreStorage 517.50.1

    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

    com.apple.iokit.IOBDStorageFamily 1.8

    com.apple.iokit.IODVDStorageFamily 1.8

    com.apple.iokit.IOCDStorageFamily 1.8

    com.apple.iokit.IOAHCISerialATAPI 2.6.2

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

    com.apple.iokit.IOEthernetAVBController 1.0.3b3

    com.apple.iokit.IO80211Family 1110.26

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com Apple.Driver.corecapture 1.0.4

    4.6.1 com.apple.iokit.IOFireWireFamily

    com.apple.iokit.IOUSBFamily 900.4.1

    com.apple.iokit.IOAHCIFamily 2.8.1

    com.apple.driver.usb.AppleUSBEHCI 1.0.1

    com.apple.iokit.IOUSBHostFamily 1.0.1

    com.apple.driver.AppleUSBHostMergeProperties 1.0.1

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 417,4

    com.apple.iokit.IOStorageFamily 2.1

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 4.0

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    com Apple.KEC.corecrypto 1.0

    System profile:

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 93), Broadcom BCM43xx 1.0 (5.106.98.100.24)

    Bluetooth: Version 4.4.5f3 17904, 3 services, 27 aircraft, 1 incoming serial ports

    Crush Bus:

    Memory module: DIMM0/0 BANK, 4 GB DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020

    Memory module: DIMM0/1 BANK, 4 GB DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020

    USB device: USB 2.0 Bus

    USB device: Hub

    USB Device: IR receiver

    USB device: ISight built-in

    USB device: USB 2.0 Bus

    USB device: Hub

    USB device: Ultra Fit

    USB Device: Card reader

    USB device: Apple keyboard / Trackpad

    USB device: Hub BRCM2070

    USB Device: USB Bluetooth host controller

    Serial ATA Device: Samsung SSD 840 EVO 120 GB, 120,03 GB

    Serial ATA Device: MATSHITADVD-R UJ-898

    Model: MacBookPro6, 2, MBP61.0057.B11 of BootROM, 2 processors, Intel Core i7 2.8 GHz, 8 GB, MSC 1.58f17

    Network service: Wi - Fi, AirPort, en1

    Graphics: integrated graphics card Intel HD, Intel HD Graphics,

    Graphics card: NVIDIA GeForce GT 330 M, NVIDIA GeForce GT 330 M, PCIe, 512 MB

    You have the MacBookPro6, 2 - the Edsel of Mac. There may be the failure of logic-board that was covered by a recall program that is now complete.

    The model was abandoned in February 2011. It is now classified by Apple as a "vintage product." This means that Apple will probably refuse to fix (see exceptions on the linked page.) In this case, you will need to go to an independent service provider. The part can be is no longer available, or the repair may not be profitable.

    Often, the problems start after an upgrade of the OS. If the upgrade has been recently, and you have backups, you can then go back to a previous version of OS X.

    Otherwise, an appointment of 'Genius' in an Apple Store, or switch to a different service provider authorized, to have the tested machine. The trial will be free to an Apple Store - unless Apple refuses to even look at the unit, as it could. Diagnoses of current equipment used by service providers don't detect the fault. There is a specific test for this number called "VST" (for "video system Test.") Ask for it. A "Failed" result means that the defect is present.

    If you decide to go to an independent service provider, be aware that the replacement part may also be faulty. Some owners reported that they went up to three replacement boards before you get one that worked. Don't expect any help from Apple if you have to pay several hundred dollars for an another bad logic board and that the supplier will be replace again.

    If you don't want to take that risk, or if you don't like the price you quoted, you may (or may not) be able to work around the problem by disabling automatic switching graphics. To use the separate graphics processor, you will need a third-party utility to manually switch to him.

  • WPA2 Enterprise 'disconnect' after about 1 h

    Hello

    I am the COMPUTER administrator for a company that has WPA2 Enterprise Wi - Fi set up in different locations across the country and who authenticate to a central RADIUS server. All windows/domain joined computers can connect and work fine however all our Macs in multiple locations meet the same problem. The Mac can connect and authenticate to the WiFi network using authentication EAP-PEAP (MSCHAPv2) however user anywhere between 30 minutes and an hour or so the mac receives an error "authentication failed on the network - authentication server is not responding. Contact your network administrator to verify the network infrastructure. ', and the only option is 'Disconnect '. The strange thing is the connection is always connected and ping google.com continues to operate until the moment I press 'disconnect '. I can then usually to reconnect back to the same network, authenticate, and continue to work for another 30-60 minutes until it happens again. This is obviously not ideal and very frustrating for my colleagues using Mac.

    I've been trying to solve cela a couple during the week and even set up a new NPS/RADIUS server on the latest version of windows server but the problem persists. I am very knowledgeable on the Microsoft products, but not so much with mac and apple. Am I missing something?

    My current test machine is a Macbook Pro 15 inch Mid 2010 running OS X EL Capitan 10.11.5 but I'm quite sure of what is going on between several versions of Mac OS.

    Thanks in advance for any guidance.

    There is an answer here of leroy Douglas that contains the caveat:

    the requirements are specific to the customer RADIUS server and can vary widely

    MacBook Pro - switching user disconnect Wi - Fi connection when you use authentication company WiFi

    have you contacted the developer of the RADIUS you have?

  • I can't sign my youtube using FireFox account. 12.0

    This started in FF 10. For some reason any on my main desktop computer, I can not sign in my you tube account. This occur only on this computer. I get no indication of an error, but when I get my e-mail address and password on the page of Youtube you tube homepage access code appears again with the sign on the button instead of my username. And more far onve tried to sign, even though the Web page displays the signon button when I press it, nothing seems to happen. I never get the sign on the new page. I have to delete all associated youtube cookies then I'll make the sign on the page, but still I can't sign.
    I tried to delete all cookies, I even uninstalled and reinstalled FF, but still I can not solve this problem.
    I am slot that Win7 Ultimate 64-bit. My laptop is running that win7 Pro 64 bit. It doesn't have this problem, even my Win8 test machine does not have this problem

    Thank you. I fixed it by going to about: permissions and looking for the youtube url ('you' entered in the search box of the site). When I chose the URL www.youtube.com value cookies has been blocked. So I unlocked it and now I am able to sign into my account. Thank you.

  • MacBook pro 6 keep restarting itself after some time

    Anonymous UUID: 48BD1E9D-2F8B-B0D1-CA70-D03490729C8C

    Thu Apr 28 10:57:15 2016

    Panic report *.

    panic (cpu 0 0xffffff7f9643fbd5 appellant): "panic GPU: 7f [< no >] 5 3 0 0 0 0 3: NVRM [0 / 1:0:0]: error 0 x 00610210 reading: CFG 0xffffffff, 0xffffffff, 0xffffffff, BAR0 0xd2000000 0xffffff912f808000 sControl-3.12.6/src/AppleMuxControl/kext/GPUPanic.cpp:127 P2/4\n"@/Library/Caches/com.apple.xbs/Sources/AppleGraphicsControl/AppleGraphic 0x0a5480a2, D0,

    Backtrace (CPU 0), frame: return address

    0xffffff912f44b040: 0xffffff80132dab12

    0xffffff912f44b0c0: 0xffffff7f9643fbd5

    0xffffff912f44b1a0: 0xffffff7f93f85fa4

    0xffffff912f44b260: 0xffffff7f94052add

    0xffffff912f44b2a0: 0xffffff7f9420df36

    0xffffff912f44b2d0: 0xffffff7f9420ecac

    0xffffff912f44b310: 0xffffff7f93f61ff6

    0xffffff912f44b440: 0xffffff7f93f62a32

    0xffffff912f44b4d0: 0xffffff7f93f5bb7d

    0xffffff912f44b510: 0xffffff7f93f5b768

    0xffffff912f44b5c0: 0xffffff7f93f8a7c2

    0xffffff912f44b7c0: 0xffffff7f93f8b76f

    0xffffff912f44b8a0: 0xffffff7f9591c0de

    0xffffff912f44b8e0: 0xffffff7f9592ba97

    0xffffff912f44b900: 0xffffff7f9595a3de

    0xffffff912f44b940: 0xffffff7f9595a43d

    0xffffff912f44b980: 0xffffff7f95931636

    0xffffff912f44b9d0: 0xffffff7f958fd0a2

    0xffffff912f44ba70: 0xffffff7f958f8f45

    0xffffff912f44baa0: 0xffffff7f958f6ad9

    0xffffff912f44bae0: 0xffffff80138df967

    0xffffff912f44bb80: 0xffffff80138e2138

    0xffffff912f44bbe0: 0xffffff80138df277

    0xffffff912f44bd20: 0xffffff8013397cc0

    0xffffff912f44be30: 0xffffff80132df283

    0xffffff912f44be60: 0xffffff80132c28b8

    0xffffff912f44bea0: 0xffffff80132d2665

    0xffffff912f44bf10: 0xffffff80133b8bda

    0xffffff912f44bfb0: 0xffffff80133eca96

    Extensions of core in backtrace:

    com.apple.driver.AppleMuxControl (3.12.6) [44D361A1-4938-3AA5-9F73-9C909B66214B] @ 0xffffff7f96431000-> 0xffffff7f96444fff

    dependency: com.apple.driver.AppleGraphicsControl (3.12.6) [1654475C-9A4B-386C-AFA8-0A530194A 2F9]@0xffffff7f96429000

    dependency: com.apple.iokit.IOACPIFamily (1.4) [5D7574C3-8E90-3873-BAEB-D979FC215A7D] @0xfffff f7f93db3000

    dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f93b2c000 0xffffff

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f93ed8000

    dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [C49819CE - 729A - 36B 2 - 9AC1 - 744A43DC23 6F]@0xffffff7f9642c000

    com.apple.nvidia.classic.NVDAResmanTesla (10.0) [05FC5D7E-BB0B-3232-BBBD-8A49B687 0D8B]@0xffffff7f93f2f000-> 0xffffff7f941a4fff]

    dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f93b2c000 0xffffff

    dependency: ffff7f93f1f000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [1114B99F-E439-329E-876D-1FEC4CF45DF6]

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f93ed8000

    com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [CA 56199, 6 - 3C8D - 3EBB - B5EF - 7B1B467 8ACF9]@0xffffff7f941af000-> 0xffffff7f9445cfff]

    dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f93f2f000

    dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f93b2c000 0xffffff

    com.apple.GeForceTesla (10.0) [01260884-60E9-35E1-A16A-70AE3322356C] @0xffffff7f95 8db000-> 0xffffff7f959a6fff

    dependency: com.apple.iokit.IOPCIFamily (2.9) [4FE41F9B-2849-322A-BBF8-A94816C003D6] @ 7f93b2c000 0xffffff

    dependency: ffff7f93f1f000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [1114B99F-E439-329E-876D-1FEC4CF45DF6]

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f93ed8000

    dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [05FC5D7E-BB0B-3232-BBBD-8A49B6 870D8B]@0xffffff7f93f2f000

    Corresponding to the current thread BSD process name: WindowServer

    Mac OS version:

    15E65

    Kernel version:

    15.4.0 Darwin kernel version: Fri Feb 26 22:08:05 PST 2016; root:XNU-3248.40.184~3/RELEASE_X86_64

    Kernel UUID: 4E7B4496-0B81-34E9-97AF-F316103B0839

    Slide kernel: 0 x 0000000013000000

    Text of core base: 0xffffff8013200000

    Text __HIB base: 0xffffff8013100000

    Name of system model: MacBookPro6, 2 (Mac-F22586C8)

    Availability of the system in nanoseconds: 5894865311929

    last load kext to 1672913320294: com.apple.filesystems.smbfs 3.0.0 (addr 0xffffff7f965a6000 size 409600)

    Finally unloaded kext to 163999332922: com.apple.driver.usb.AppleUSBUHCI 1.0.1 (addr 0xffffff7f94870000 size 126976)

    kexts responsible:

    org.virtualbox.kext.VBoxNetAdp 5.0.18

    org.virtualbox.kext.VBoxNetFlt 5.0.18

    org.virtualbox.kext.VBoxUSB 5.0.18

    org.virtualbox.kext.VBoxDrv 5.0.18

    com Apple.filesystems.smbfs 3.0.0

    com.apple.driver.AudioAUUC 1.70

    com.apple.driver.AppleHWSensor 1.9.5d0

    com.apple.driver.AGPM 110.21.18

    com Apple.filesystems.autofs 3.0

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.iokit.IOBluetoothSerialManager 4.4.4f4

    com.apple.driver.AppleMikeyHIDDriver 124

    com.apple.driver.AppleMikeyDriver 274.7

    com.apple.driver.AppleHDA 274.7

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com Apple.Driver.pmtelemetry 1

    com.apple.GeForceTesla 10.0.0

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.driver.AppleIntelHDGraphics 10.0.0

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleHV 1

    com.apple.driver.AppleMCCSControl 1.2.13

    com.apple.driver.AppleSMCPDRC 1.0.0

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.4f4

    com.apple.driver.AppleSMCLMU 208

    com.apple.driver.AppleMuxControl 3.12.6

    com.apple.driver.AppleLPC 3.1

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.driver.AppleIntelHDGraphicsFB 10.0.0

    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

    com.apple.driver.SMCMotionSensor 3.0.4d1

    com.apple.driver.AppleUSBTCButtons 245,4

    com.apple.driver.AppleUSBCardReader 3.7.1

    com.apple.driver.AppleUSBTCKeyboard 245,4

    com.apple.driver.AppleIRController 327,5

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 38

    com.apple.iokit.SCSITaskUserClient 3.7.7

    2.8.5 com.apple.iokit.IOAHCIBlockStorage

    com.apple.driver.AirPort.Brcm4331 800.20.24

    com.apple.driver.AppleFWOHCI 5.5.2

    com.apple.iokit.AppleBCM5701Ethernet 10.2.0

    com.apple.driver.AppleAHCIPort 3.1.8

    com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

    com.apple.driver.AppleSmartBatteryManager 161.0.0

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleACPIButtons 4.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 4.0

    com.apple.driver.AppleAPIC 1.7

    com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

    com Apple.NKE.applicationfirewall 163

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

    com.apple.iokit.IOUSBUserClient 900.4.1

    com.apple.AppleGraphicsDeviceControl 3.12.6

    com Apple.kext.Triggers 1.0

    com.apple.iokit.IOSerialFamily 11

    com.apple.driver.DspFuncLib 274.7

    com.apple.kext.OSvKernDSPLib 525

    com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

    com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

    com.apple.iokit.IOSurface 108.2.1

    com.apple.iokit.IOFireWireIP 2.2.6

    com.apple.driver.CoreCaptureResponder 1

    com.apple.driver.AppleSMBusController 1.0.14d1

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.4f4

    com.apple.iokit.IOBluetoothFamily 4.4.4f4

    com.apple.driver.AppleBacklightExpert 1.1.0

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.driver.AppleGraphicsControl 3.12.6

    com.apple.driver.AppleSMBusPCI 1.0.14d1

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.driver.AppleHDAController 274.7

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.iokit.IOHDAFamily 274.7

    com.apple.iokit.IOAudioFamily 204.3

    com.apple.vecLib.kext 1.2.0

    com.apple.driver.IOPlatformPluginLegacy 1.0.0

    com.apple.driver.IOPlatformPluginFamily 6.0.0d7

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

    com.apple.iokit.IOUSBMassStorageDriver 1.0.0

    com.apple.driver.AppleUSBMultitouch 250,5

    com.apple.iokit.IOUSBHIDDriver 900.4.1

    com Apple.Driver.USB.cdc 5.0.0

    com.Apple.Driver.USB.Networking 5.0.0

    com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

    com.apple.driver.CoreStorage 517.20.1

    com.apple.driver.usb.AppleUSBHub 1.0.1

    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

    com.apple.iokit.IOBDStorageFamily 1.8

    com.apple.iokit.IODVDStorageFamily 1.8

    com.apple.iokit.IOCDStorageFamily 1.8

    com.apple.iokit.IOAHCISerialATAPI 2.6.2

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

    com.apple.iokit.IO80211Family 1110.26

    com Apple.Driver.corecapture 1.0.4

    com.apple.iokit.IOFireWireFamily 4.6.0

    com.apple.iokit.IOEthernetAVBController 1.0.3b3

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com.apple.iokit.IOAHCIFamily 2.8.1

    com.apple.iokit.IOUSBFamily 900.4.1

    com.apple.driver.usb.AppleUSBEHCI 1.0.1

    com.apple.iokit.IOUSBHostFamily 1.0.1

    com.apple.driver.AppleUSBHostMergeProperties 1.0.1

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 417.2

    com.apple.iokit.IOStorageFamily 2.1

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 4.0

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    com Apple.KEC.corecrypto 1.0

    Model: MacBookPro6, 2, MBP61.0057.B11 of BootROM, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, MSC 1.58f17

    Graphics: integrated graphics card Intel HD, Intel HD Graphics,

    Graphics card: NVIDIA GeForce GT 330 M, NVIDIA GeForce GT 330 M, PCIe, 256 MB

    Memory module: DIMM0/0 BANK, 4 GB DDR3, 1067 MHz, 0x85E3, 0 x 353337333478787878373878363530367878

    Memory module: DIMM0/1 BANK, 4 GB DDR3, 1067 MHz, 0x85E3, 0 x 353337333478787878373878363530367878

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 93), Broadcom BCM43xx 1.0 (5.106.98.100.24)

    Bluetooth: Version 4.4.4f4 17685, 3 services, 27 aircraft, 1 incoming serial ports

    Service network: Ethernet, Ethernet, en0

    Serial ATA Device: WDC WD7500BPKT-00PK4T0, 750,16 GB

    Serial ATA Device: MATSHITADVD-R UJ-898

    USB device: USB 2.0 Bus

    USB device: Hub

    USB device: USB optical mouse

    USB Device: Card reader

    USB device: Apple keyboard / Trackpad

    USB device: Hub BRCM2070

    USB Device: USB Bluetooth host controller

    USB device: USB 2.0 Bus

    USB device: Hub

    USB Device: IR receiver

    USB device: ISight built-in

    Crush Bus:

    You have the MacBookPro6, 2 - the Edsel of Mac. There may be the failure of logic-board that was covered by a recall program that is now complete.

    The model was abandoned in February 2011. It is now classified by Apple as a "vintage product." This means that Apple will probably refuse to fix (see exceptions on the linked page.) In this case, you will need to go to an independent service provider. The part can be is no longer available, or the repair may not be profitable.

    Often, the problems start after an upgrade of the OS. If the upgrade has been recently, and you have backups, you can then go back to a previous version of OS X.

    Otherwise, an appointment of 'Genius' in an Apple Store, or switch to a different service provider authorized, to have the tested machine. The trial will be free to an Apple Store - unless Apple refuses to even look at the unit, as it could. Diagnoses of current equipment used by service providers don't detect the fault. There is a specific test for this number called "VST" (for "video system Test.") Ask for it. A "Failed" result means that the defect is present.

    If you decide to go to an independent service provider, be aware that the replacement part may also be faulty. Some owners reported that they went up to three replacement boards before you get one that worked. Don't expect any help from Apple if you have to pay several hundred dollars for an another bad logic board and that the supplier will be replace again.

    If you don't want to take that risk, or if you don't like the price you quoted, you may (or may not) be able to work around the problem by disabling automatic switching graphics. To use the separate graphics processor, you will need a third-party utility to manually switch to him.

  • my macbook pro 6.2 restarts randomly, it was Mac Engineering and other support thech place they all sayd ¨nothing is wrong¨

    MacBook pro MacBook Pro (15-inch, mid 2010) 6.2

    Intel Core i5 to 2.53 GHz processor

    4 GB 1067 MHz DDR3 memory

    software version 10.10.5 OSX Yosemite

    Hello there so the problem is that these reboots the machine randomly without that same warning sometimes browse files or click an app... No. were

    it restarts 2 times as in reports, it shuts down then restarts, then restarts again... as I ve said before I took these machine to the store aple engineering in Florida, they say that they could not reproduce the failure or crash... it crashes restarts twice, recorded some of the apps while others are not, says:

    Anonymous UUID: 0B8C6BA6-3C9D-2AB4 - 08 to 5 - 7CFD9F58

    Kills Apr 12 12:20:01 2016

    Panic report *.

    panic (cpu 3 0xffffff7f9041cc1b appellant): "panic GPU: 7f [< no >] 3 3 0 0 0 0 3: NVRM [0 / 1:0:0]: error 0 x 00000100 reading: CFG 0xffffffff, 0xffffffff, 0xffffffff, BAR0 0xd2000000 0xffffff80b4f2b000 eMuxControl/kext/GPUPanic.cpp:127 P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.10.25/src/Appl 0x0a5480a2, D0,

    Backtrace (CPU 3), frame: return address

    0xffffff80a2e135a0: 0xffffff800eb2ad21

    0xffffff80a2e13620: 0xffffff7f9041cc1b

    0xffffff80a2e13700: 0xffffff7f910abb9f

    0xffffff80a2e137c0: 0xffffff7f9117518e

    0xffffff80a2e13800: 0xffffff7f911751fe

    0xffffff80a2e13870: 0xffffff7f913e9056

    0xffffff80a2e139a0: 0xffffff7f9119882d

    0xffffff80a2e139c0: 0xffffff7f910b25f1

    0xffffff80a2e13a70: 0xffffff7f910b00fc

    0xffffff80a2e13c70: 0xffffff7f910b2225

    0xffffff80a2e13d60: 0xffffff7f915d4925

    0xffffff80a2e13dc0: 0xffffff7f915d15ef

    0xffffff80a2e13e40: 0xffffff7f915bb95a

    0xffffff80a2e13e70: 0xffffff7f915771e2

    0xffffff80a2e13e90: 0xffffff7f9157852f

    0xffffff80a2e13ed0: 0xffffff7f9157513f

    0xffffff80a2e13ef0: 0xffffff800f0d595d

    0xffffff80a2e13f40: 0xffffff800f0d37cd

    0xffffff80a2e13f80: 0xffffff800f0d38c6

    0xffffff80a2e13fb0: 0xffffff800ec116e7

    Extensions of core in backtrace:

    com.apple.driver.AppleMuxControl (3.10.25) [752C63EA-73E8-39BC-8225-3A97D0C403BF] @0xffffff7f9040e000-> 0xffffff7f90421fff

    dependency: com.apple.driver.AppleGraphicsControl (3.10.25) [3DC2F93F-5197 - 3B 16-8975 - 0142E7A0 474B]@0xffffff7f903f8000

    dependency: com.apple.iokit.IOACPIFamily (1.4) [70E2B65E-A91A-3522-A1A0-79FD63EABB4C] @0xfffff f7f8fc19000

    dependency: com.apple.iokit.IOPCIFamily (2.9) [BDA92C3B-AD86-33E5-A7F1-1603465350A7] @ 7f8f324000 0xffffff

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f90335000

    dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [65E3187E - B-36E9-bi33-1B13ABB058 949, 1A]@0xffffff7f90409000

    com.apple.nvidia.classic.NVDAResmanTesla (10.0) [796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f9105b000-> 0xffffff7f912c3fff]

    dependency: com.apple.iokit.IOPCIFamily (2.9) [BDA92C3B-AD86-33E5-A7F1-1603465350A7] @ 7f8f324000 0xffffff

    dependency: ffff7f903fb000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [7372D580-6DDE-3457-B043-49B8447FC9D2]

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f90335000

    com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f912c4000-> 0xffffff7f9156dfff]

    dependency: com.apple.nvidia.classic.NVDAResmanTe

    System profile:

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 93), Broadcom BCM43xx 1.0 (5.106.98.100.24)

    Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

    Crush Bus:

    Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

    Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020

    USB device: Hub

    USB device: Memory card reader internal

    USB device: Hub BRCM2070

    USB Device: USB Bluetooth host controller

    USB device: Apple keyboard / Trackpad

    USB device: Hub

    USB device: ISight built-in

    USB Device: IR receiver

    Serial ATA Device: TOSHIBA MK5055GSXF, 500,11 GB

    Serial ATA Device: HL-DT-ST DVD - RW GS23N

    Model: MacBookPro6, 2, MBP61.0057.B0F of BootROM, 2 processors, Intel Core i5 2.53 GHz, 4 GB, MSC 1.58f17

    Network service: Wi - Fi, AirPort, en1

    Graphics: integrated graphics card Intel HD, Intel HD Graphics,

    Graphics card: NVIDIA GeForce GT 330 M, NVIDIA GeForce GT 330 M, PCIe, 256 MB

    so I ve been looking for help and advice how ever these seems to be an unusual problem did not all patches still seems in reality nobody knows! ¿s' some ligth on the question please

    You have the MacBookPro6, 2 - the Edsel of Mac. There may be the failure of logic-board that was covered by a recall program that is now complete.

    The model was abandoned in February 2011. It is now classified by Apple as a "vintage product." This means that Apple will probably refuse to fix (see exceptions on the linked page.) In this case, you will need to go to an independent service provider. The part can be is no longer available, or the repair may not be profitable.

    Often, the problems start after an upgrade of the OS. If the upgrade has been recently, and you have backups, you can then go back to a previous version of OS X.

    Otherwise, an appointment of 'Genius' in an Apple Store, or switch to a different service provider authorized, to have the tested machine. The trial will be free to an Apple Store - unless Apple refuses to even look at the unit, as it could. Diagnoses of current equipment used by service providers don't detect the fault. There is a specific test for this number called "VST" (for "video system Test.") Ask for it. A "Failed" result means that the defect is present.

    If you decide to go to an independent service provider, be aware that the replacement part may also be faulty. Some owners reported that they went up to three replacement boards before you get one that worked. Don't expect any help from Apple if you have to pay several hundred dollars for an another bad logic board and that the supplier will be replace again.

    If you don't want to take that risk, or if you don't like the price you quoted, you may (or may not) be able to work around the problem by disabling automatic switching graphics. To use the separate graphics processor, you will need a third-party utility to manually switch to him.

Maybe you are looking for

  • Problem with 9.3.3

    Downloaded ios 9.3.3, now cannot call or receive calls.

  • Satellite L30-113 does not connect to internet

    Hello My laptop was working perfectly until yesterday morning.But when I logged in the afternoon it wouldn't connect to the internet. Well, click on the connection icon bought the normal boxes as diagnose & repair and the network & sharing center how

  • Mystery in the bin file will not go away

    I need help with a problem of recycler. If I right-click and empty basket, I get an "access denied" message with a strange file name. I started in safe mode, I tried the "rd /s c:\recycler' command and got the following:"access denied that the file i

  • T61p + Windows 7 64 bits + Intel AMT/drivers.

    Hi all I recently installed Windows 7 x 64 on my T61p (6459-CTO). I installed the drivers and all devices and market very well except two: PCI serial port PCI Simple Communications controller After a failure to find drivers for these, I googled the q

  • HP Pavillion laptop do not close

    my laptop HP Pavilion does not stop until the battery is discharged down.pl. Advisor