HP Pavillion laptop do not close

my laptop HP Pavilion does not stop until the battery is discharged down.pl. Advisor

Hello

·        What happens when you try to shut down the laptop?

·        You receive an error message or code?

·        You did changes to the computer before the show?

Method 1

Step 1:  Try to shut down or restart the computer in safe mode and check if the problem persists:

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Step 2: If the question does not have continues mode without failure, then put the computer to boot to verify which application is causing the problem:

http://support.Microsoft.com/kb/929135

Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

Method 2: You can also try to restore the computer to the point that it worked very well:

http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

Method 3: Run the SFC scan and check if system files are intact:

How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

http://support.Microsoft.com/kb/929833

You can also check: turn off a computer: frequently asked questions

http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

Tags: Windows

Similar Questions

  • Envy 15 k005tx: laptop will not close properly... the va just black screen but the light is on and the fan also

    Laptop doesn't go out normally... va just black screen but the light is on and the fan is also on... so I have to stop it by pressing the power button... help plz...

    Hello

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    Try to use the following method to see if you can install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • Pavilion 15-n005tu: laptop does not completely close down

    Hi, using the 15-n005tu Pavilion. The laptop can not completely stop, after the screen turns black, power light comes on over the wifi light. The fan on too. I tried to do an update of the bios and chipset, but this has not solved the problem. Kindly help...

    Mathew

    Hello

    Try disabling the hybrid Windows 8 start - you can do the following.

    Right-click in the battery icon in the taskbar and select Power Options - in the next window, click on "Choose what the power button" in the left pane.

    In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close open windows and stop the laptop by right clicking on the icon from the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

    Type (or copy and paste) the following command (including spaces) and click Enter.

    Shutdown /s /t 0

    Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

    If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

    Kind regards

    DP - K

  • PowerOn password not known on an old computer hp pavillion laptop

    The password is not known for an old HP Pavillion laptop.  After 3 try error code 65535 is given.  I've seen other posts where a person is able to give a password by knowing the error code.  Thanks for any help.

    Hello

    Try the reset codes below

    Bad hash

    or re-check the code entered.

  • has taken a hard drive from a HP pavillion laptop and I put it on a Toshiba laptop and now I can not activate

    I took a hard drive from a HP pavillion laptop and I put it on a Toshiba laptop and now I can not activate it and its telling me that windows is not genuine but also telling me that my product key is incorrect. I maybe need to all system files and things for a Toshiba.How can solve this problem?

    Hello Eduardo Montoya when you traded player having Windows installed on it? If so you will not be able to activate the operating system is an OEM manufacturer and will only work with the original system. If it is a retail facility, you will need to use the phone activation steps listed in the link below. Let me know if it helps. Thank you.

    Windows XP

    http://support.Microsoft.com/kb/307890

    Windows Vista

    http://support.Microsoft.com/kb/940315

    Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  • I installed quick heal antivirus in my laptop, it flashes just opened for a short time and not close access.

    * Original title: Quick heal installed in windows

    I installed quick heal antivirus in my laptop and I installed the software manufacturer third, software flashing just opened for a short time and not close access. problem occurs on Win 7 and XP.

    (Moved to install, upgrade, and activate)

    Uninstall Quick Heal and see if the problem resolves.

    Try another Antivirus utility:

    The best Free Antivirus for 2015 | PCMag.com

  • ENVY 15-k008ne Notebook PC: my laptop does not completely turn off

    Hello

    When I have shutdown/Hibernate / standby my laptop, it will turn off completely.

    All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

    And when I try to Hibernate, everything is ok, but I have the same problem.

    Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

    After manual turn off, when I turn it on again, everything works correctly:

    -If hibernation: OS will continue to last situation.

    -If stop: OS works normally without error or warning.

    After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

    Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

    Is there a parameter/software to check and fix my problem?

    Thank you

    Hello

    Try the following.

    Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

    In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

    When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

    https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

    Once the installation is complete, restart the laptop.

    When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

    Kind regards

    DP - K

  • Tecra A7: After using Record now does not close properly

    Hello

    I have a problem with recordnow software on my new laptop Tecra A7. It does not close after that I have to burn a CD/DVD (recordnow.exe still appears in the Task Manager). It closes correctly when I open only and nothing is burned. The main problem is that I can't access my DVD - RAM drive until the recordnow.exe is closed by the Manager tasks. I tried to reinstall the recordnow software but it does not solve the problem.

    I hope that someone will help.
    Thank you

    Hello

    Thanks a lot for the power supply to the back. This problem is unknown and tells you some very useful information.

    Thanks again!

  • K010 ENVY: my laptop will not turn off

    Hello

    When I shutdown/hibernate/standby/resume my laptop, it will die completely.

    All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

    And when I try to Hibernate, everything is ok, but I have the same problem.

    Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

    After manual turn off, when I turn it on again, everything works correctly:

    -If hibernation: OS will continue to last situation.

    -If start/stop: OS works normally without error or warning.

    After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

    Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

    Is there a parameter/software to check and fix my problem?

    Thank you

    Hello

    You are welcome

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    You can use the following method to install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • My laptop can not stop and restart three days

    Hello

    When I go to the menu windows start and choose the closing down or reboot, it does not close properly. "The same message every time:" if it please do not turn off or unplug your machine.  Installation of the update 1 of 1... "Even if I wait 3-4 hours, the message is still on the screen, and my laptop cannot stop.  Finally, I unplug my machine to stop it.

    Please tell me what can I do to solve this problem.

    Thank you

    Jasmine

    Hello

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up the registry, see the link:

    Back up the registry

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Check the link and try to reset the Windows update components:

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

  • The display on my laptop is not on.

    The display on my laptop is not on. At the start, it of on a second and then darkens. The display is always there. I can connect a secondary screen to the laptop and it works fine. It makes a weird sound (like a boing sound) when the screen will Dim. When you close the laptop and then open again the screen lights up again for a second, then goes dark. I tried uninstalling and reinstalling the video drivers and that didn't work.

    This indicates generally the backlamp (s) of the screen failed. These lamps shine at the back of the screen and lights by behind, making it visible to you.  When they fail it is often what they do - turn on for a second or two and then turns off, you can still see the screen but only with extreme difficulty.

    They are not something that can easily be replaced, you will need to take your laptop to a Service Center for repair for assistance.

    "Raider757" wrote in the new message: * e-mail address is removed from the privacy... *

    The display on my laptop is not on. At the start, it of on a second and then darkens. The display is always there. I can connect a secondary screen to the laptop and it works fine. It makes a weird sound (like a boing sound) when the screen will Dim. When you close the laptop and then open again the screen lights up again for a second, then goes dark. I tried uninstalling and reinstalling the video drivers and that didn't work.

  • After IOS 10.0.2, camera will not close

    Just did the upgrade to the new IOS, and now everytime I open my phone or my pad, the camera is open and will not close. Reboots do not help.

    Hello. Can you explain more? You open the smart cover or click on the Home button and immediately see the camera? You should see the lock with a message screen to press home to open. The lock screen is now configured with the page today (widgets) on the left and on the right camera, so you can drag to get access without having to open the iPad. If you enter the camera, by error, by clicking on home leaves you.

  • How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

    i mac OSX10-9-5 2015.   How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

    To the best of my knowledge iTunes has all of the features that could stop him. What make you believe it's iTunes rather than some other power saving feature? What happens exactly 30 minutes? It's happens during playback video or audio?

    TT2

  • Windows Firefox will not close.

    Hello
    I am running windows 8.1 and Firefox 38.0.1. whenever I click on the Red 'x' to close Firefox, Firefox will not close. If I want to close all tabs, Firefox does not close the last tab. If I try to merge windows (by dragging the tab of a window in a different window) Firefox will create a blank tab on the window where I dragged the dragged tab. So far, the only way to close the Fire Fox is click on the close button or to stop by the Task Manager. When I re - open Firefox Windows and previous tabs are also there, and I'm still not able to close them. I restarted my PC and reinstalled Firefox (uninstalled and re-download). However, after downloading Firefox... the same windows will be opened, with the same tabs! It's horrible!

    Hello cach_dies,

    Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • Click the menu button

      click Help

      then select restart with disabled modules.

    If Firefox does not work, you can start Firefox in Mode safe as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

  • Apps will not close and will not be Mac restart

    Hello

    ______________

    MacBook Pro (retina, 15 inches, beginning 2013)

    2.4 GHz Intel Core i7

    16 GB 1600 MHz DDR3

    Intel HD Graphics 4000 1536 MB / NVIDIA GeForce GT 650 M 1024Mo

    OSX: 10.11.5

    ______________

    After the upgrade to osx 10.11.5 Some Apps do not close properly. A free App Icon(with the black dot) remains on the dock. I can start the application again, which leads to an additional icon. When I run the command "killall Dock" multiple icons dead is reduced to one. It seems that for most opengl using the Apps are kept in the Dock after closing.

    After a while, some of the Apps start more. Photos.app throws an exception "invalid pixel format.

    The only thing to get rid of the icons and the problem with apps not from, is to restart my mac.

    A normal reboot or a stop will not work (so I am unable to install the latest update of the operating system).

    I have to use 'sudo shutdown-h now' or hold down the power button.

    Does anyone else have this problem or even better: a fix for this problem.

    Thanks in advance,

    Torben

    What is Wacom software installed on your Mac? If so, upgrade to the latest version. If it does not help uninstalling the Wacom software, including possible elements of Wacom/Bamboo in System Preferences > users and groups > Login.

    http://www.Wacom.com/en-us/support/FAQs/drivers-software/how-do-i-uninstall-a-Dr iver-on-mac-os-x

Maybe you are looking for