Test memory helps!

Similar Questions

• HP pavilion dm1 - test memory failed

  My Hp Pavilion dm1, hangs as soon as windows starts. I went the system diagnostics and ran the development of the system, but it failed. Here are the results:

  Memory test: failed

  Failure ID: 9C4FNJ-5NU6J9-MFH15F-404303

  PRODUCT ID: LW200UA #ABA

  I don't know if I have a faulty memory module or if it is a problem that can be fixed with a system restore? Can someone help me please?

  Hello:

  You need to replace the memory module.

  Try first, remove and replace it.

  If you get the error, buy one with the same characteristics as the bad.

  If your laptop is still under warranty, contact HP technical support for a replacement of the faulty memory Strip guarantee.

  Make sure that you remove the battery and disconnect the laptop power adapter before working inside.

• Pavilion dv6: failure of memory, help!

  Hello world

  I had some memory problems lately, including many blue screens with 'MEMORY MANAGEMENT' listed as the problem. I ran a test of memory by pressing F10 at startup for the area of memory and the test failed in about 2 seconds after the start. I got the following information:

  Failure ID: RGFTMU-5MN7K3-MFP556-406903

  Product ID: LW260UAR #ABA

  According to me, one of my chips of memory is damaged, but I do not know how to access physically to replace. Help, please!

  It's 2 GB 1333 MHZ PC3 - 10600 DDR3 SDRAM SODIMM

  You can replace it with a 4 gig of same type and speed. East - another module the same? The only thing you lose by mixing module sizes is operation "dual channel" which is a bit faster and lose would be a compromise to have more RAM.

  It would be a like kind replacement:

  http://www.eBay.com/ITM/like/231033893993?lpid=82&CHN=PS

  That would be an upgrade to a 4 GB module.

  http://www.eBay.com/ITM/4GB-DDR3-1333-MHz-PC3-10600-single-stick-SODIMM-laptop-notebook-RAM-memory-204p-/361150227991?PT=LH_DefaultDomain_0&hash=item54163b2617

  You don't want to try to stay with the same density memory; that is 4 blocks on one side. It's a little unusual for HP high density (4 blocks) RAM in their laptops, it is usually 8 block or low density. That's why I'm asking if the other module is the same.

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.

• EliteBook 8540p bluescreen - test memory failed

  Dear readers,

  My HP elitebook 8540p was serve me a long time, but recently, it displays a blue screen and resets after entering the windows password.

  Diagnosis at the start to say:

  Memory test: failed

  Failure ID: UOEDUC-56C77E-XD7U3G-40N603

  Product ID: WTO38ES #ABH

  Memory Module 2 low-Slot 1 (right)

  ----

  Forgive me if this is very obvious, but this means that the memory under the keyboard needs to be replaced, correct? I'm confused by the message saying "Module 2 low-Slot 1 (right)", I see only a card...

  If Yes, what is the best way to acquire a new memory (primary memory card) card?

  Thank you very much in advance

  Hello

  It seems that your memory card needs to be replaced:

  Please go to the Page from the HP Support

  http://h20566.www2.HP.com/portal/site/hpsc

  Enter the name of the product

  HP elitebook 8540p

  Click on the section of the manual

  Click on Service and maintenance information for the maintenance manual

  Service manual (page 68) provides instructions on how to replace the memory card.

  It also provides the spare HP part # you can order

  You can then use the following link to order the part

  http://PartSurfer.HP.com/search.aspx?type=prod&SearchText=WT038ES

  I hope this helps.

• Limit of 4 GB of RAM in the test memory on the Satellite A100

  Hello
  I just installed 4 GB of ram. The BIOS (update) shoes 4gigs in bios setting, but the memory test will pass to 3071 MB
  I checked the single two Rams - the check goes to the 2 GB all in both cases... So where is the 1 GB of ram spent?
  Toshiba SAIS, that my laptop is supported up to 4gig ram, I have a Toshiba A100 - 153 (PSAA9e), version 6 of Bios Phoenix CSS 2005 Q4 Version Mak - r1.53
  RAM support up to 800 MHz FSB

  Someone at - it an idea of gon?

  Hi friend

  a man who is easy to solve. You only need to read this [TAbBlogger.com article | http://blogs.msdn.com/hiltonl/archive/2007/04/13/the-3gb-not-4gb-ram-problem.aspx] and this [Document of Support Toshiba | http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm].

  Everything will be clarified and you will be enlightened as to the fact that the system itself without the operating system also has its amount of RAM to work properly.

  That's it, good weekend

• ERROR: Out of MEMORY, help, please

  Edition of Windows: Windows 7 Home Premium

  Processor: Intel Core i7 860

  RAM: 8 GB

  System type: 64-bit operating system

  Motherboard: Asus P7P55D motherboard

  Graphics card: GeForce GTX 295

  Manufacturer: myself

  Error: Out of memory error when I enter on my second game in Combat Arms (fps) by Nexon. He stops the game each time around going into the second game and gives me this error.

  I've had this computer for about 3 months now, and this error began to occur when Nexon has voice chat and a few new features of game which took place in a patch about 1 month ago.

  How to fix this error?

  I would be very grateful if you could help me.

  Mr. Gill,
  I would say that you uninstall\re-insatll the game but do not install the patch.  Then, play the game and try for awhile and see if the error occurs.  It is possible that the patch is not fully compatible with Windows 7, or a piece of your equipment.  You can also check manufacturers of games forums for more information on this situation. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• test memory Windows failed

  memory test failed for windows

  Then?

  The sticks of memory have failed or you have another hardware problem with your motherboard

• try to automate an application test - need help.

  Hello

  I am newbie to BlackBerry Java development.

  I developed a custom application for blackberry with BlackBerry JDE. To test the same thing, I want to automate the test of it. Could someone help how can I achieve this.

  Please tell me where I could run my application as a deamon process in balckberry and access another application API. Is this possible?

  Also please tell me all the related links. I'm less bothered if my automation must be put with the other language as MDS, time of execution.

  Sorry if I posted in the wrong group, please let me know the correct contact.

  Thank you

  Micheline.

  I'm the right person to answer this question because I did all this, but I hope that I will give you some tips and other people can fill.

  Most of this information came from DevCon 2009, specifically Dev32. and COM18.  I don't know what's the State in which the provision to slides of people who do not (if you do not, you can download them yourself), but perhaps you can ask your RIM-binding agent and see what they can do to bring these, you might even be able to buy the proceedings of the Conference here :

  https://www.blackberrydeveloperconference.NET/

  In terms of tests automated. I think that these options are available:

  (a) unit tests.

  Look here for the opensource project now called RIMUnit.  In my view, that there is also a package of BBUnit autour.  You can use these tools for will test your classes

  (b) test simulator

  It is possible to entry to the script Simulator and the Simulator and then run the Script.  Not sure that you have an interact with the Script, but I guess it's useful as a regression Test.  You run fledgecontroller.exe.  I found a documentation here:

  http://docs.BlackBerry.com/en/developers/deliverables/6338/Test_BBSmrtphnSmltr_events_using_script_6...

  On OS 5.0 simulators, you can get the Simulator to capture the entrance.  You can use this in older simulators to read, if you will probably want to modify the script.

  (c) test of EventInjector

  A bit like (b) except that generate you events by using a program on the BlackBerry itself.  You need to watch the screen and the new OS 5.0 function locateDifference and be used to see the differences between screenshots.

  (d) on the test device

  For example, using services like DeviceAnywhere.

  (e) two other tools mentioned in DEV32

  BSquare TestQuest

  IBM Rational Functional test

  Hope this helps

• FDS Test Drive - help with examples of applications

  I try to use the FDS 30 minute TestDrive sample applications inside
  Flex Builder. I downloaded the test drive and all the samples of work
  fine just dandy, and I can view source etc. Then I wanted to load
  some of the apps sample in Flex Builder so that I could edit and
  play with them with the debugger to learn more.
  
  I tried the following:
  create the new project - use Flex Data Services/compilation app locally
  Root folder: C:\fds-tomcat\webapps\ROOT
  Root URL: http://localhost:8600 / ROOT. When I cliquerai to finish, I get the
  After 3 errors in the output panel:
  
  Unable to load SWC fds.swc: multiple points
  Unable to load SWC fds.swc: multiple points
  The definition of local base class was not found.
  Could not resolve < mx:Application > for implementation of component
  
  I'm on Flex 2.0.143459.
  
  I checked that fds.swc is indeed in the
  C:\fds-tomcat\webapps\ROOT\WEB-INF\flex\libs folder.
  I don't know what mean other messages or what to do.
  
  I then unzipped stubbornly examples of applications in the
  Project file FlexBuilder (I called FDS TestDrive samples) and
  tried to run anyway to see if I could get more information. I then get
  a browser with the following additional errors window:
  type of status report
  message /ROOT/FDS%20TestDrive%20Samples/Chat.html
  Description the requested resource (/ROOT/FDS%20TestDrive%
  20Samples/chat.html) is not available.
  
  So I guess that one of the problems is that it does not have an html document.
  But I don't know how to fix this.
  
  I don't know what to do. Any help would be GREATLY appreciated.
  

  Someone helped me offlist that once I'm frustrated that this forum is basically dead. But in case anyone else needs this info, I thought I would post. First of all, be on Flex version 2.0.155577. I have therefore had to redownload all of Flex, uninstall my old version, install the new version. Then I did the following
  to create the Flex Builder project for the dashboard sample application:

  File - > new-> Flex project
  Select Flex Data Services
  Select the application compiles locally
  Click next
  Uncheck the "default local Flex Data Services location"
  Click Browse... and open c:\fds-tomcat\webapps\ROOT
  Root URL: http://localhost:8600 /
  Context root: /.
  Click next
  Project name: ;
  Uncheck the "Use default location" checkbox
  Folder: c:\fds-tomcat\webapps\ROOT\dashboard
  Click next
  The main application file: dashboard.mxml
  Click on finish

  The context root is really essential. Also, to find my old Flex projects, I used file:import and then had to do a little more fiddling with some of the properties of the project.

  Too bad, this Forum is dead. I tried to get feedback to Adobe on this concern, but so far it has not helped. sigh

• Memory help please

  Pavilion DV6 - 7010US Entertainment PC laptop is

  with Windows 7 64 bit.

  I can't find anything on the site that tells me this as the maximum amount of memory that I can install in the computer. There are two slots... I've been on a Web site that sells the memory and they show that this computer supports 16 GB of memory... but once installed, it is only recognizing 8 GB... so I don't think that he will use all the 16 GB unless there is something I need to do...

  Please advise what the maximum memory for this computer...  I can't find it on the site of HP...

  Thank you

  Barbara

  Barbara,

  Here are the specifications of your laptop of HP Pavilion dv6-7010us Entertainment and this is its HP Pavilion dv6 Entertainment PC - Maintenance and Service of Guide. In Chapter 1, page 4, description of the product it says clearly.

  Two customer accessible/upgradable memory module slots

  Supported dual channel DDR3 - 1600 MHz

  Supports up to 16384 MB of system RAM

  Which is another way of saying the 16 GB of RAM (2 x 8 GB DIMMS). Your best bet is to purchase memory from a dealer of quality with a statement of "compatibility guaranteed". Corsiar.com is one of those places.

  Please send Bravo

• Svchost is taking too much memory, help please?

  My computer started lagging randomly the other day and I checked the Task Manager processes and saw svchost was using almost 600 k of memory and about 40% of the CPU. I right click the svchost and went to services and seen it as things netsvcs the svchost related.

  I didn't know what to do and could not find a way to solve this problem, so I decided that I would just restore my computer with my CD of Windows 7 Ultimate. The reinstallation of Windows 7 (formatted my HD), it would allow me to make updates. I kept getting errors (8007001F I think is most often, I got) I searched and searched on the error I received, but could not find anything useful. So I ignored just updated. Now the svchost is take a lot of memory. Mind you, until I reinstalled Windows 7, my computer has been updated and the svchost was taking a lot of memory. Here are the screenshots.

  Also, I try to put an end to the process, but it results in a blue screen and restart sometimes.

  http://www.Tinypic.com/r/20saf51/6

  http://www.Tinypic.com/r/31488kg/6

  I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  For more information about Process Explorer, see here:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  When you open the process Explorer, you need customize settings. This by checking the options on the view menu drop-down. Click Select columns, and then the process Image tab check all the boxes before description, Image, Image Type and command line path. I suggest that you click also on two other options in the drop-down display, namely show processes from all users and display fractions CPU.

  The extent to which you can customize is considerable. You can change the information displayed and this sometimes leads to confusion and frustration.

  Processes are listed in the left column. Some names appear to be duplicated. This isn't so. Svchost.exe is an apparent example of duplication. You generally listed something like 10 cases. If you right-click one and select properties and the Image tab you will find that the command line is different for each instance of svchost.exe. Each instance of svchost.exe is another group of services. You can see a list of these Services if you click on the Services tab.

• Exam test question help

  Hello...

  The question you entered he says"... which of these applications potentially returns more than two lines. »

  As noted the explanation in the answer, C & D returns more than two lines if the table has more than two lines. While the question is written, C & D should be the answer. However, the explanation suggests that the A & B are the correct answers.

  If you have faithfully reproduced everything, what we have here is a combination of wrong answers. I'm shocked, shocked, I say to find a practice test with an error. :)

  Someone screwed up. If we assume that the explanation is correct, then the question should have read something like "+...". which of these queries will never return more than two lines. + »

  That said, if it is a commercial practice test, you really should not reproduce here because of copyright issues. At least, it is not a question of real exam which would also lead to questions of violating the agreement of the OCP candidate and potential loss of certification.

• try to download ring call central controller and get an error message on the microsoft logo will not test. Help!

  I have windows xp.

  You can try this: right click on my computer, click Properties, click the Hardware tab, click driver signing, click on ignore.

• Downloaded CS6 and get test screen, help!

  I bought pe $ 19.99 CS6 rmonth installing.  When I start the application, I get the screen of the trial asking if I want to continue my trial of CS6.  Is this normal and should I hit continue during the next 20 + days until what it expires then will my subscription continue without problem?  Thanks in advance!

  In the trial screen, you will have a button that says: this software under license. Click on the button and follow the on-screen instructions. I think that you will be asked to sign in with your adobe ID and password. Once you are connected, the software will be associated with your subscription.

  Could you try and let us know how it goes.

• TypeError: Error #1009 with hit test, please help

  -The actions and events-

  stage.addEventListener (MouseEvent.MOUSE_MOVE, charMove);

  function charMove(evt:MouseEvent)

  {

  addEventListener (Event.ENTER_FRAME, checkcharCollision);

  }

  function checkcharCollision(event:Event)

  {

  for (var i: uint = 0; i < char.length; i ++)

  {

  if (char [i] .hitTestObject (cur))

  {

  char.splice (i, 1);

  lalLChannel = lalL.play ();

  lalL_transform.volume = 1;

  lalLChannel.soundTransform = lalL_transform;

  lalBtn.gotoAndStop ("ful");

  lalLChannel.addEventListener (Event.SOUND_COMPLETE, lalLComplete);

  }

  }

  }

  and it gives me this error as soon as I move the mouse:
  TypeError: Error #1009: cannot access a property or method of a null object reference.

  to INDEX_fla::MainTimeline/checkcharCollision()
  NY ideas?
  THX pavel

  for (var i: uint = 0; i<----  >