Memory help please

Similar Questions

• ERROR: Out of MEMORY, help, please

  Edition of Windows: Windows 7 Home Premium

  Processor: Intel Core i7 860

  RAM: 8 GB

  System type: 64-bit operating system

  Motherboard: Asus P7P55D motherboard

  Graphics card: GeForce GTX 295

  Manufacturer: myself

  Error: Out of memory error when I enter on my second game in Combat Arms (fps) by Nexon. He stops the game each time around going into the second game and gives me this error.

  I've had this computer for about 3 months now, and this error began to occur when Nexon has voice chat and a few new features of game which took place in a patch about 1 month ago.

  How to fix this error?

  I would be very grateful if you could help me.

  Mr. Gill,
  I would say that you uninstall\re-insatll the game but do not install the patch.  Then, play the game and try for awhile and see if the error occurs.  It is possible that the patch is not fully compatible with Windows 7, or a piece of your equipment.  You can also check manufacturers of games forums for more information on this situation. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Svchost is taking too much memory, help please?

  My computer started lagging randomly the other day and I checked the Task Manager processes and saw svchost was using almost 600 k of memory and about 40% of the CPU. I right click the svchost and went to services and seen it as things netsvcs the svchost related.

  I didn't know what to do and could not find a way to solve this problem, so I decided that I would just restore my computer with my CD of Windows 7 Ultimate. The reinstallation of Windows 7 (formatted my HD), it would allow me to make updates. I kept getting errors (8007001F I think is most often, I got) I searched and searched on the error I received, but could not find anything useful. So I ignored just updated. Now the svchost is take a lot of memory. Mind you, until I reinstalled Windows 7, my computer has been updated and the svchost was taking a lot of memory. Here are the screenshots.

  Also, I try to put an end to the process, but it results in a blue screen and restart sometimes.

  http://www.Tinypic.com/r/20saf51/6

  http://www.Tinypic.com/r/31488kg/6

  I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  For more information about Process Explorer, see here:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  When you open the process Explorer, you need customize settings. This by checking the options on the view menu drop-down. Click Select columns, and then the process Image tab check all the boxes before description, Image, Image Type and command line path. I suggest that you click also on two other options in the drop-down display, namely show processes from all users and display fractions CPU.

  The extent to which you can customize is considerable. You can change the information displayed and this sometimes leads to confusion and frustration.

  Processes are listed in the left column. Some names appear to be duplicated. This isn't so. Svchost.exe is an apparent example of duplication. You generally listed something like 10 cases. If you right-click one and select properties and the Image tab you will find that the command line is different for each instance of svchost.exe. Each instance of svchost.exe is another group of services. You can see a list of these Services if you click on the Services tab.

• Pavilion dv6: failure of memory, help!

  Hello world

  I had some memory problems lately, including many blue screens with 'MEMORY MANAGEMENT' listed as the problem. I ran a test of memory by pressing F10 at startup for the area of memory and the test failed in about 2 seconds after the start. I got the following information:

  Failure ID: RGFTMU-5MN7K3-MFP556-406903

  Product ID: LW260UAR #ABA

  According to me, one of my chips of memory is damaged, but I do not know how to access physically to replace. Help, please!

  It's 2 GB 1333 MHZ PC3 - 10600 DDR3 SDRAM SODIMM

  You can replace it with a 4 gig of same type and speed. East - another module the same? The only thing you lose by mixing module sizes is operation "dual channel" which is a bit faster and lose would be a compromise to have more RAM.

  It would be a like kind replacement:

  http://www.eBay.com/ITM/like/231033893993?lpid=82&CHN=PS

  That would be an upgrade to a 4 GB module.

  http://www.eBay.com/ITM/4GB-DDR3-1333-MHz-PC3-10600-single-stick-SODIMM-laptop-notebook-RAM-memory-204p-/361150227991?PT=LH_DefaultDomain_0&hash=item54163b2617

  You don't want to try to stay with the same density memory; that is 4 blocks on one side. It's a little unusual for HP high density (4 blocks) RAM in their laptops, it is usually 8 block or low density. That's why I'm asking if the other module is the same.

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.

• Liteon Cd ROM completely lacking in 'My Computer'. Help, please! (Someone... Please help!)

  Hello.  I tried to contact the OEM directly, but it has been a week and no response.  I hope someone can help me please.  I copy the email below.  Because I sent this e-mail, I found more "evidence" of the prior exestance of CD ROM  Although it is completely zero from 'My Computer', there are a lot of drivers on the computer for him and now I don't think it's the drivers. I don't know what to think, really. "Here are my new results: in Device Manager, under" Liteon CD ROM "(always with an exclamation yelloe on this subject) I tried to run the"Hardware Update Wizard"for her, and I got this response: the wizard did not find a better match for the material that the equipment currently installed. When I look under 'properties', he says: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. When I click to troubleshoot, I get the same message ("Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »).  He (Liteon CD-ROM) is not listed under "config/system/system information system summer/components/multimedia/CD ROM '-there's just an empty space next to"CD ROM ". Even that in "my computer - it's gone."  The CD ROM will not work, but the light is on and it wil eject and accept a disc, but it will not read it. Please look at my email below and please email me with any questions or recommendations. I can't take another sleepless night, trying to "find my CD lost.  It can be a very simple solution - I hope so. But in all honesty, I really don't know what the problem is.

  Dear Sirs,

   

  I'm really, really hoping you can help me. I'm about to lose my mind trying to figure this out by myself.  I can't find a more appropriate contact you, so please forgive me if this isn't in your area or service. If that is the case, Please before my email to the section within your company and let me know. Everything on the official Liteon site I found and (tried to) read is in Taiwanese, and I am unable to read or translate.  If you could (have mercy on me) so help me or point me in the right direction - I would appreciate it very much .  I tried to understand what I have to do for 2-1/2 weeks and I have spent too much time on this when I should be spending time with my kids! :).

   

  My problem is the following... Recently, I ran a clean up/duplicate file registry cleaner program (ARO) and it seems also removed some vital and very much needed files, extensions, drivers, programs and who knows what else.  I had to download several other programs, file extensions and drivers from scratch, in order to get these things working again. But I can not for the life of understand me what to do with my Liteon CD-ROM. I also used the registry cleaner deletes "duplicate files", and after researching (too late), I found that it often confuses some files as duplicates when they are indeed not the same - post or file descriptions are very similar, or disable a single number or letter. I lost a lot of my pictures as well, and I'm heartbroken over. Anyway, the biggest problem I've noticed is that my CD ROM (Liteon CD-ROM LTN486S) will not work. It happened immediately after the registry cleaner 'cleaned' my folders and things - so I guess that's the culprit.  In fact, my computer is not recognizing even the CD ROM at all. It of Completely disappeared-MIA of 'Information/system components' lacks content 'My Computer' and when I try to update the drivers in the only place I can find that show the CD ROM (but with a large yellow explanation
  ! Mark) - in the "Device Manager" , I get the error: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». Then, when I right click on it and select "Troubleshoot to start the troubleshooter for this device", I get the same error: ("Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »). Track only of it (that I can find anyway) is in the 'Device Manager', where even once, it's a big yellow exclamation on the "Liteon CD-ROM LTN486S" here.  It is the only piece of evidence that it ever existed. I've looked everywhere I can think of, in places that I didn't know existed. I've looked everywhere on the internet for the driver for the "Liteon CD-ROM LTN486S' updates but unfortunately, I can't find. There are a few items that refer to the "OEM".  For some reason, I think it's the drivers, but I'm not computer very well informed. It could be something completely different. I wish I could uninstall info CD (only) existing Liteon I can find - and reinstall everything from zero (even do this? Please, tell!). Then... I thought that I contact me Liteon and ask for the drivers. It's at least a Start.  Could you tell me if there is something else I should do or review.
   
  My system info: I have a (Compaq Evo) Windows 2000 Professional SP3 XP. For what it's worth-(if this is important) it's a NIC PCI 32-bit, Intel Pentium 3, 700 MHz, 128 MB total memory, 20.0 GB hard drive, CD-Rom drive, CD - RW drive, 56 k Modem and 10 / 100Mb... (whatever the devil what is). Microsoft Update is in place and worked (automatically), and my system is "up to date" as far as MS is going. Help, please!  I don't know where to another look or what else to do. Please, please... Please advise.
   
  I thank very much for any help, information, recommendation or reference you can give. Maybe you have a safe and wonderful holiday season.
   
  Jenifer Williams, 39...
   
  Amazing MOM, amazing nurse
  A lot of email from Google and shopping experience :)
  Skills very little mundane
  (But quickly learning by trial and error
  !)
  SC, UNITED STATES.
  Favorite (only known) language: English
   
   
  Thanks again!
   
   
  .

  You're welcome, and good luck!

• Saves the empty yet says there is only 100 MB left. Help please.

  I use my Clip for audiobooks only. Problem: listening to an audio book, I put it on pause, he turned back and when I got all the books on this topic has been deleted and the message says: empty. I then tried to transfer a book of overdrive as usual and it would not transfer because of the Sansa Clip says that there are only apart of 1.87 GB 100 MBinternal memory. It is impossible because it has absolutely nothing at all downloaded on my Clip. Help, please. I don't know what to do. Thank you.

  silverfusion wrote:
  I use my Clip for audiobooks only. Problem: listening to an audio book, I put it on pause, he turned back and when I got all the books on this topic has been deleted and the message says: empty. I then tried to transfer a book of overdrive as usual and it would not transfer because of the Sansa Clip says that there are only apart of 1.87 GB 100 MBinternal memory. It is impossible because it has absolutely nothing at all downloaded on my Clip. Help, please. I don't know what to do. Thank you.

  I think that there may be two ways to go about troubleshooting it: a clean format, reload.     or check the memory of Clips with a windows machine and running Chkdsk on it.     I prefer the Format myself that this will clear most gremlins.   But a chkdsk /f can work as well.

  To Format the Clips of Sansa memory go on the Menu Settings > Format > Yes ...   Then reload your music and audio books.

  Use chkdsk (excerpt from the Clips FAQ)

  Contributor: c1u31355

  Getting weird or empty file names, you can not delete? Songs of stop working in some albums? Running the disk check can help.

  Here is the workaround:

  1. To connect in MSC / Mode of Rhapsody.
  2. Open my computer and take note of the drive letter; example; e: / or f: /.
  3. Left click Start then run: and type chkdsk x:/f (x being the letter of the drive that was mentioned earlier).

  * / f : corrections of errors on the disc.

  Microsoft Access disk for XP instructions
  Check disk on Wikipedia

  Hope this helps,

• How can I use process explore check PID 1176 60% CPU svchost.exe? Help, please.

  As the title, how can I use process Explorer to check PID 1176 60% CPU svchost.exe? Help, please.

  The task manager has PID 1176-60% CPU, all the time, which I believe is the reason my pc works so slow.

  How to use Exp Pro to know what is actually using 60% of my cpu, via svchost 1176 PID?

  I found the Exp Pro Geek guide - but are struggling to pass for a non geek.

  Using Vista 32 bit.

  Thanks in advance for any answers.

  Process explore uses more resources than svchost, it works automatically using a lot of memory. Anyway, the open task

  Mgr, locate the svchost, R.click on the location of TI/properties/open a file. You will find that it is a service of microsoft.

  The drain is usually in BITS, try to go to run, or cmd, type: services.msc in msc, locate BITS, R.click on it, open,

  Set to manual start, exit msc, restart the pc.

• USB driver Help! Help, please!?

  I can't get my computer to recognize the usb device, I installed all updates for the drive yet still is not recognized in my computer, the device appears in Device Manager but trying to move files, and there is nothing to move. I have a page but do not paste in the box, then someone please help me, this isn't the 1st time that does not recognize the drive: the last time was an Mp3 player. Still recognizes camera memory card, please someone help me?

  Thanks Lindsay

  Lindsay1985,

  Without knowing the brand and model of your computer and the operating system (other than Vista) what I see, you recently reinstall the operating system?

  If this is a Dell computer, try to install the laptop / desktop utility first.

  So for other computers (including Dell) install the chipset drivers. The chipset drivers usually contain the drivers for the USB Ports.

  Rick

  Dell inkjet printer problem solver

• Error code: __Stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) can anyone help please

  My laptop Acer gives me a blue screen on start, or crashes on startup.
  I just got an error code:
  Can stop: 0x0000008E (0xC000001D, 0x82651B5A, 0xA03EBBD4, 0x00000000) anyone help please

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret
  You must identify which exception has been generated.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Test memory helps!

  Doing a very basic memory test at boot a R410.

  I installed the 16GB DDR3 1066 mhz modules.

  During start up it reads properly the GB, but it is say 800 mhz?

  I don't get full speed?  Have they been set up differently?  It's own extraction modules.

  Help please!

  Hello

  What CPU model is in the system? Are there other modules of memory in the system? Modules DIMM how have you installed? What is the model number of the memory?

• Help please! Buddy's computer will start

  My boyfriend is out of town and I was using his computer Compaq Presario V5000.  I went to answer a phone call and instead of shutting down the computer, I simply closed the lid, which normally into hibernation system until the lid is reopened and it starts up.  This time; However, when I open the cover, it makes a noise like it's going to start up and the power button lights up, so I don't know it is powered, but then nothing happens after that.  I had a few occasions where it has been slow to start after the cover was closed, but after a few seconds, the blue wireless light would flash and the system would start up.  This time it's right there and I hear the rotating CD drive from time to time, but nothing happens on the screen.

  I tried the HP troubleshooting tips and I reinstalled the memory and even tried to remove the CD-Rom drive and replace it, but I keep getting the same results!  I'm desperate to try to get this resolved before he returns to the city... I won't be responsible for it's broken! Even if I swear that I have nothing to him...

  Help, please!

  Any time...

  Sorry for the acronyms... NB is portable.

  No matter what model over two years is not worth fixing... data can be transferred from the hard drive disk (or HARD drive) on the new computer and with prices so low these days and a longer warranty on top, for the same price... Yes, you can get a much better system.

  The system has had more problems that what you posted... only it is reached a final point.  Just a coincidence that it happened when you were using it as you have always had.

• could someone help please...

  could someone help please... I spend five hours to find the driver, but not succeed, help me please...

  http://community.Sony.com/T5/VAIO-software-other-operating/Hello-i-am-looking-for-driver-for-memory-...

• Constant BSOD! Help, please!

  Get the constant BSOD stops. More than 5 - 10 times a day! I have no idea, and also my knowledge, everything is up-to-date. Help, please! :(

  Here is a link to my most recent minidumps.

  Current Minidumps link

  http://www.mediafire.com/download/76d7v7z904d6o46/CrashMinidumps.7z

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  
  Don't forget to download any other DMP files (especially those running auditor)

  If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
  Boot from the CD and let it run at least 5 or 6 passes.
  Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  But sometimes it will crash and will not tell you the driver.
  Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
  Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  Click Start and type "auditor" (without the quotes) and press enter
  Select 'Create a custom settings (for code developers)' and click 'Next' (or Type "check/standard/all" (without the quotes) If you want to check each of them (this will slow down your computer))

  Choose "Select custom settings from a full list" and click "Next".
  Select the entire document except for "Low resource Simulation" to win 8 do not check concurrency stress test and the verification of the conformity of DDI, click "next".
  Select "Select driver names from a list", then click "next".
  Select all drivers that are NOT provided by Microsoft, and then click "Next".
  On the next page, select "Finish".
  Restart the system and wait as he crashed to blue screen.
  Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  Further reading
  http://support.Microsoft.com/kb/244617

  Words of driver verifier
  
  Information check driver driver Windows Vista - Microsoft Search Verifier
  Questions of Verifier within Vista / Windows 7 http://support.microsoft.com..default.aspx?+verifier1&res=20
  Pilot feature pool http://support.microsoft.com/kb/188831

• When I click on open in RAW, this message keeps coming up.  CAMERA RAW IS NOT ENABLED.  Camera Raw edition requires a product calling it launched at least once to activate this feature.     Help, please.  What is c?

  When I click on open in RAW, this message keeps coming up.  CAMERA RAW IS NOT ENABLED.  Camera Raw edition requires a product calling it launched at least once to activate this feature.     Help, please.  What is c?

  I don't really think it will work, but I have a vague memory of something like this caused by different versions of a file in Bridge and Photoshop. If you want to try it go in the bridge folder and find a file named Amtlib.dll and rename the original Amtlib.dll. Now, go to your Photoshop folder and find the file with the same name and copy it in the folder of the bridge. Now, try to see if your image will now open in Raw. If this does not work, go to the folder of the bridge, remove the Amtlib.dll and restore the original to its former name.

  Terri

• Could someone help please? Creation of Weblogic Domain Port 5556 unavailable

  Could someone help please?
  
  I try to install PFRD 11g, following, "Oracle® Fusion Middleware Guide Installation of Oracle Portal, forms, reports and discoverer 11 g Release 1 (11.1.1)"
  
  On a server for Red Hat Linux Enterprise 5-32 bit, properly installed Weblogic and PFRD (Portal, forms, reports, discoverer) 11g (type installation only). Then, run config.sh to configure the instance PFRD. However, the configuration hangs at step 11 12, creative field.
  
  The server has 6 GB of physical memory and out of it, 5 GB memory is free.
  
  Here are the latest entries of the log of the installation
  ------------------------
  Task: create the domain
  XXX: add task: oracle.as.install.classic.ca.standard.DomainProvisioningTask
  AdminServer port is 7001
  try to connect to WJ - cn.cn.oracle.com 7001
  Creating Weblogic domain.
  isPortAvailable [port 5556]
  Port 5556 is not available.
  oracle.as.provisioning.exception.ASProvWorkflowException
  at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2623)
  at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2469)
  at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:632)
  at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
  at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
  at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
  at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
  at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
  at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
  at java.lang.Thread.run(Thread.java:619)
  ---------------------
  I think it's because of the 5566 port is not available, but I don't know how solve it, someone help me please? Thank you very much.

  You can use

  netstat -ap|grep 5556
  

  to check which process is using port 5556. An example of output is the following:
  TCP 0 0: 5556 *: * LISTEN 4858/java
  The last column shows the pid and process what it is (in this case a java process)

  For more information the process, you can use

  ps -ef|grep java
  

  An example of output is the following:
  Oracle 4858 4835 7 12:09 pts/2 00:00:03 /home/oracle/bea/jrrt-4.0.1-1.6.0/bin/java jrockit-Xms128m-Xmx256m - Xverify: weblogic aucun-Djava.security.policy=/home/oracle/bea/wlserver_10.3/server/lib/weblogic.policy-Dweblogic.nodemanager.javaHome=/home/oracle/bea/jrrt-4.0.1-1.6.0. NodeManager - v
  In this case the Nodemanager uses port 5556.

  You can stop the process using kill-9 4858 (4858 being the process id - could be different in your case).

  We you run Setup (/wlserver_10.3/common/bin config.sh) there is an option to edit
  setting up your environment (select optional configuration). Here you can change the settings of managed servers,
  clusters and machines so check this box on the screen. It is a screen to configure the servers managed in which you
  can change the settings of the managed servers to create (for example listening ports). In the next step, you can configure
  clusters (and subsequently to add servers to the cluster). When you click Next, you are offered the machine configuration
  screen, in which you can set the parameters of the machines. For each machine, you can configure a nodemanager thanks to the
  parameters nodemanager listening address and port to listen nodemanager. The last parameter, you can change a port number
  that is not already taken on your system.