test the page hp psc 1350

Similar Questions

• Is there a trial period I can test the Pages ability to open Word documents on my iMac?

  Is there a trial after the purchase period, during which I can test the Pages ability to open Word documents on my iMac?

  N °

  You are free to use the web version to iCloud.com as you like, however.

• Test alignment page rejects PSC 1510, continues to waste my ink, need of a workaround

  My COPS that did not last time I installed a new ink cartridge, but now it prints a test page, but then rejects the print page, saying incorrect page has been placed in it, but this is the page that it just printed. He offered to let me start the alignment, but when I press the scan button it flashes for a moment and nothing happens, I have to stop the printer, unplug the USB, back on the power, let him print a new page, then only scans the new page, so he rejected once again, regardless how I put the paper in. It's just a waste of ink and paper, the thing print perfectly well. I want a work around for this, or a free supply of replacement ink cartridges from HP, because that's all just ridiculous, these cartridges are expensive and here my printer used for nonsense every time it is consumed, what's the point of owning the thing if it consumes all of the ink by itself?

  The alignment page requires that the colour and black cartridges are correctly print.  The page prints correctly?  If this is not the case, either the color or the black print cartridge will require cleaning or replacement.

• Print "Jerky" in the middle of the page on psc 2175 all-in-one

  I was very happy with my 2175 during several years.

  Then today, I had all sorts of problems.

  A lot of noise, best described as grinding operations.  In addition, the msg "door open, transport clear Jam then press on enter, after which I would get a msg to the effect of"close cartridge door, etc..""

  I went through procedures (several times) on the website of troubleshooting problems including do the "cleaning operations", (including cartridges and paper rolls, or search through the wheels etc paper jams.) (Nothing found), doing all the power off power on - cycling suggestions.

  Right now, I've been able to print without strange noises, but I 'stuttered' printing in the middle of the page of any printed document - a letter from the MS Word or a Web page for example.  By 'Stuttered', I mean a slight delay and the reprint of characters.

  Change is much less than a width of standard characters on some documents made up of only 2 or 3 characters.   Towards the middle of the page, I mean that stuttering is limited to 10% of the width of the page - and in the middle.  The left and right side of the printed document appear very well.

  It's time for a new printer?  I hope not.

  Thank you

  Gently clean the Strip coding as described here.  Observe the warnings, the Strip is fragile and can be damaged by handling.

• Cannot copy of my printer, but not able to print from my computer to test the page,

  I have a photosmart printer 310a all-in-one. I run on windows 7 64 bit using a dell xps desktop computer.  I used the hp doctor capable of printing the test page with accuracy but cannot print from my computer.  Wireless network works fine.  I check connectivity.  According to the solutions of hp, the printer is online and working properly, but when I try to print it is unable to do.

  Thank you for your help.  I decide to try another computer to see if it is printed.  He did it wasn't the hp printer that was causing the problem. It was the new version of mcafee on my desktop that is causing the problem.  Also, I disabled mcafee found out that I was able to print without difficulty.  I hope this helps other people with the problem.  I tried to fix my mcafee but decide to go with another company for the antivirus and spyware

• Directories of destination for copy files seeded in to test the page seeded in Jdeveloper

  Hello

  I need confirmation on how to place the JDeveloper environment to test a seeded page - specifically the directories of files copied from $JAVA_TOP and < PRODUCT_TOP > mds destination.

  I want to start (and possibly expand) a page which is owned by the module for example AP, I took copies of

  Set 1) all xml files in $AP_TOP/mds (including subdirectories, in ascii mode)

  Set of 2) all xml files of $JAVA_TOP (including subdirectories, i.e. all of the modules, in ascii mode)

  Set of 3) any type of files from $JAVA_TOP (including subdirectories, i.e. all of the modules, in binary mode).

  My local JDEV_USER_HOME is c:\dev\oaf\r1211\jdevhome\jdev. I understand that these files must be unzipped in one or more of the following directories JDEV_USER_HOME/myclasses and JDEV_USER_HOME/myprojects.

  Could he confirm what set of files goes into what directory (ies).

  Together 1 must be copied into myclasses only, or my projects only or both. Same question for Set 2 and 3 of the value.

  I tried different combinations, but not able to get the desired effect. for example sometimes the module of the application (for example, HomeAM) appears in the Jdev browser in oracle.apps.ap.payments.server duplicate. This has been fixed when I deleted all the files in my project class (so keep the class under myclasses only files), now the controller (oracle.apps.ap.payments.webui.HomeCOJava) disappeared from the node browser webui.

  We are on EBS R12.1.3. JDeveloper 10.1.3.3.0

  Thank you

  Sanjay

  Hello Sanjay

  Try the link, below it will give you an idea:

  http://apps2fusion.com/apps/14-FWK/456-iExpenses-OA-framework-R12-extensions

  Thank you

  David

• my default printer is an hp psc 1350 but shows offline

  Hi I have a sony laptop with windows 7 and used the old hp psc 1350 8 months without problem, but now it is showing offline.  I checked all the cables are properly connected, switching off all without success.

  Hi BarbWilliams,

  ·          Did you the latest changes on the computer?

  Check out the link below on the HP site and check if it helps.

  "Printer is off-line" Message appears on the computer and the HP software does not print

• Why an I get the test page yellow and black with each print job. I have a HP PSC 1350

  Why an I get the test page yellow and black with each print job? I have a HP PSC 1350

  Hi - I assume that the page that you see printed is the alignment page.  This happens usually if the alignment process has not been made.  All you should have to do is take the printed alignment page and place it face down on the scan scanner glass and press.  Who must complete the alignment process and eliminate the page printing every time.  If you have problems, try following the procedure described in this document.

  Hope that helps.

• PSC 1350 all prints a test page every time when turned on

  After changing the cartridge, we printed test page.

  Now, whenever we turn on the printer it prints test page automatically.

  How to disable this option?

  Thank you

  Hello vancat,

  If your problem is that your PSC 1350 prints a test page when it is turned on or after every printjob, it is very likely because the cartridge alignment process is not finished. After you have installed a new cartridge in the printer, it will print an alignment page. You must take this page and place it on the scanner glass (make sure that the top of the page is in a good way), then you press the "Scan" button on the printer itself. It will scan the page (that is, read the page) and full alignment process (so it is not scanning in the sense that it sends an image to the computer).

  I hope that clarifies the process of alignment slightly.

• PSC 1350 prints a page of test every time he gets on' "

  PSC 1350 father prints a test page whenever he gets on' ', waste of paper and ink, and it drives me crazy whenever I come to visit!  Is there a way to disable this feature?

  It is currently under Vista Home premium on an HP desktop computer, but I think he has had the same problem when using XP on an old computer.

  The 'test page' has "to get the best quality, follow the steps using this sheet" printed in English in the top left of the page and printed in 8 other languages. Below is a series of three stages of instruction photos, one-third is a finger pressing a black button at the bottom of the row of buttons.  The rest of the page, about 2/3 of the page, is a series of black, grey and yellow lines.

  After printing the map must be loaded into the scanner and you press the button as shown on the sheet to complete the alignment process.  When the alignment is complete, it will not print another page of alignment until the next time that a cartridge is replaced.

• I have a psc 1350 HP which cannot me use the scanner, due to incompatibility with Internet Explorer 8.

  I have a psc 1350 HP which cannot me use the scanner, due to incompatibility with Internet Explorer 8.  When I use their "fix", it turns out that my screen blue and green. Aid others?

  Your support for the product is unfortunately - the manufacturer of the product.

  Suppose you tried everything here:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=306884&prodTypeId=18972&ObjectID=c00802504

• Want 7640 does not print color, but is printed in color on the Page of Test of Google Cloud Print

  I can't print the colors in a print job from the Web via Google Cloud Print / ePrint.   It prints in black and white.

  However, if I print a test page for Google Cloud Print, it prints in color.  I can also print a color copy.  My ink cartridges are filled.  When printing using chromium, the color preference is set to 'color '.  Everything works as expected.  The printer is capable of printing black & white jobs from across the internet.  The device is on.  Paper is in the tray.  The plateau is in the printer.  There is no jam.  I am trying to print source documents have color in them.  I am completely seen, and would be able to see the color in printed documents, if it existed.  Forgive my recitation of what is obvious, but I just spent several hours on a hotline explaining and reexplaining that my test print from the Web, color print.

  My environment is printer Envy 7640 and HP 11 Chromebook

  HERE IS WHERE THE CAUSE MAY BE:

  When I visit the page of Google Cloud Print to http://www.google.com/cloudprint/learn/ , I am able to click on "Try It Now" to find my printer, select 'Grey_CMY' color 'Color', click 'Print' to generate a single color test page.  However, I can't find any way to save the preference of color by default, and when I go back to the Google Cloud Print Try It Now page, color is set back to "Grey_CMY".  So even if I'm selected in the print dialog box color Chrome , it may get deleted by default in Google Clout black and white printing.

  Any help is appreciated!

  OK, here's the resolotion: when printing the dialog box, there is the link at the bottom of the dialog box "Print using the Google Cloud Print dialog box.  From there, the PAG printers are displayed by default of Grey_CMY can be substituted for the color and the job will be printed in color.

  So, I can't change the default, but I can ignore it, which is fine with me - I just need to know can I print in color.

• How to change the settings for color for HP PSC 1350 all-in-one printer

  HP psc 1350

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and the black writing all go faded. How can I change the color settings, so it comes out better?

  I have a printer psc 1350 HP for my windows vista. I just bought two ink cartridges and
  Black writing all going faded. How can I change the color settings, so it comes out better?

  ================================
  Sounds like a bad printer cartridge or possibly a
  ... have printer problem you checked with the help of HP?

  Examples of documents Support HP:

  Colors on the Copies are incorrect
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00712305&cc=us&LC=en&DLC=en&product=306888&tmp_track_link=ot_search

  Solving print quality problems
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bpu04822&cc=us&DLC=en&LC=en&JumpID=reg_R1002_USEN#N388

  I was wondering are these reloaded cartridges? I tried
  in my old model HP and it still wouldn't print.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

  Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

  Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!