test2

Similar Questions

• Form Questions

  Hi all

  A few problems trying to create spreadsheets with formulas. I made an effort and searched here and the internet for solutions but only partially successful.

  First, I know how total amount in a column and generate the result on another table, but what I do not know how to do is display the result in another table, when the digits are added in the column boils. Using the worksheet below, if I press on enter after $32 in C9 and entered $46 in C10 after next row appeared, the result in D10 are $ 200, but for now that the figure in the table of FINAL BALANCE remains at $154, I don't know how to formulate for each additional number unlisted gets summed up in the table of CLOSING BALANCE.

  

  Then it is, if you look at the Test2 table below there 2 separate input columns (debit and credit), I do not know how to generate a balance after each entry in column E. Moreover, if I wanted to, how to generate a balance in the inventory Table of CLOSING after each entry in the columns (debit and credit), especially when it's a spreadsheet running which will have additional transactions?

  

  Finally if you look at the table below, the numbers in columns D through i on the 4HR table are calculated from the values in the columns K and L, which come from the table/stops to spread that gets matched with the items in the column. If you look at the B column, you will see S or L, which is short of short and long. Each value of short and long on each pair are different from each other because additional trade and stop on a long trade positions are in front of the additional trades and stops on a short trade. What I want to do is when the market is entered in column A and L is entered in column B, numbers automatically enters the long values in the table of the value of spread / stops in columns K and L. Hope, it makes sense, is that possible?

  

  

  Cheers for your help

  Graeme

  For the 'first ':

  in total a column regardless of how many lines there are (and tolerate the addition and deletion of lines) using the following formula:

  = Sum (C)

  For the "next":

  Use the formula in the column E:

  E2 = Sum($D$2:D2) + Sum($C$2:C2)

  Select cell E2, copy

  Select cells E2 at the end of column E, block

  For the last question...

  Is not the 's' or 'L' in column B redundant since the short or Long already is the market A column name?

  Here's a way you can accomplish this:

  

  K2 = SIERREUR (VLOOKUP ($A2, VALUES of PROPAGATION/STOP: $A:$ C, MATCH (K$ 1, ' / STOP the SPREAD OF THE VALUES ': $1: $1), 0), "")

  K2 Select, copy

  Select the K2 cells at the end of the L column, paste

• Mobile information of an e-mail to another address (Thunderbird)

  I am trying, if possible, move the information (address book, messages, etc.) from an existing to a new e-mail address e-mail address. For example, [email protected] has all the data and information that I need. [email protected], this is where I want to copy data.

  I tried to copy and replace the files to the correct folder, but every time I restart Thunderbird, it does not load the appropriate information. Is it possible to do it at all?

  an address of existing email to a new email address.

  You talk about the different accounts?
  If so, the Thunderbird AddressBook is assigned to a specific account.

  I tried to copy and replace the files in the correct folder

  I don't know what you were doing.

  You can move messages between accounts simply by drag and drop. For a larger number of messages, it is recommended to select messages to be moved - click with the right button on the selection - Move To.

  It does not load the appropriate information.

  What is the appropriate information? Be more specific.

• Why can I not see some content on a website

  Hello
  I don't see the speed test with Firefox but with IE https://www.telecom.co.nz/internet/existingcustomers/overview/testyourspeed/?nid=mm335
  It comes to my ISP.
  I have been through all the patches of Java you suggested here, reinstalled java, does not and don't have javafx, java platform enabled and still no "speed test button.
  Can anyone help please?
  Thank you
  Jayne

  It is a situation of "mixed content". Firefox has blocked the small frame where the test page is loaded because the address starts with HTTP instead of HTTPS (the home page is HTTPS): http://speedtest.telecom.co.nz/test2

  When this happens, you will see a 'shield' icon in the address bar. This article describes its significance: mixed in Firefox content blocking

  If you trust the site to incorporate the non-secure page, it runs as expected and shows the 'orange exclamation triangle' in the address bar a reminder. (See screenshot)

• AppleScript newbie question

  Hello.

  I'm new to applescript, so forgive me if this is Basic.

  I am trying to write a script that will delete the contents of the folder selected in the list and placed in a variable.

  So far, I have one list the variable in place.

  I can view list items.

  But if I want to have the elements of the variable before you can delete the items in the folders, how can it be archived?

  Here's what I have so far:

  the value of $myvariable to choose from the list {"Test1", "Test2", "Test3", "Test4", 'Test5', ' all Tests ' ""} with the title "Select folders" with guest "folders files will be deleted" with multiple selections allowed

  display as text with the button icon caution default 1 dialog 'clear' & $myvariable

  Display dialog box "Are you Sure" buttons {"OK", "Cancel"} with icon stop default 2 button cancel button giving 2 after 15

  If the return of result = 'Cancel' button and then

  display alert "no file has been deleted.

  on the other

  If the return of result = 'OK' button and then

  display alert "files have been moved to the trash.

  end if

  end if

  Best regards

  Mikkel

  Hello

  It must compel the folder parent of your folder list with an element of selected names, like this:

  ------

  the value of $myvariable to choose from the list {"Test1", "Test2", "Test3", "Test4", 'Test5', ' all Tests ' ""} with the title "Select folders" with guest "folders files will be deleted" with multiple selections allowed

  If $myvariable is false then return - leave this script, which was cancelled by the user

  display as text with the button icon caution default 1 dialog 'clear' & $myvariable

  Display dialog box "Are you Sure" buttons {"OK", "Cancel"} with icon stop default 2 button cancel button giving 2 after 15

  -If the user cancels, this script out automatically, no need to check the back button, because-> Cancel button 2

  Set theParentFolder (path to the folder of the Office AsString) - must be a string and a path of HFS, * the office is the folder parent as example, change it according to your needs *.

  Repeat with thisName in myVariable - list of names

  Tell application "Finder" to remove the files in the folder (theParentFolder & thisName)

  end repeat

  display alert "files have been moved to the trash.

  ------

• Keychain corrupts the elements on the copy

  I just bought a new iMac 17.1% and upgraded to OSX 10.10.4, El Capitan

  I've been manually migrating my stuff on fram a much older iMac when I came across this problem, struggled with it for a few hours with the help of a representative from Apple and vain, but I think I finally have it nailed and identified.

  Create two cool keyrings, test1 and test2.

  In Keyring test1, create a note secured, SN11 and a password, PW11. Open each item and enter the password for the keychain to always allow access.

  Now drag SC11 to keychain test2. In test2, there is now an application titled password < unknown >. SC11 disappeared from test1, of course. The content of the new password is <? XML version = "1.0" encoding = "UTF-8"? > (your data has disappeared)

  Now, drag PW11 to keychain test2. You get a message that the move is not possible because there is already an item with that name in test2.

  Now remove two keychains, generate new and put in place the experience again.

  Now, drag PW11 to test 2. There is now a < unknown > titled application password in test2. PW11 has disappeared from test1, of course. The new password < unknown > has the same password as PW11, but the other info is spare electrons.

  Now drag SC11 to keychain test2. You get a message that the move is not possible because there is already an item with that name in test2. Remove the < unknown > password, and now you can 'move' SC11.

  It works even for copy and paste procedure.

  I love beta testing Apple SW in my spare time

  I called Apple support and the problem got out of hand at two levels. A bug report has been filed, and in a month or two the problem can be solved.

  There is no work all about secure notes and application passwords. You cannot export and you cannot copy, and you can't move them.

  Can of exported and imported keys and certificates. I don't know all copy and move.

• Frames to prevent the adsense ads

  Hello

  If the loading an image, this will prevent ads adsense.

  This problem occurs here:

  1. test will a framework and content of page test.htm.

  2. loading of this page with 'LOAD' adsense ads will disappear.

  This problem will not occur on this page:

  1. test2 will not load a framework.

  2 loading this page again with 'LOAD', adsense ads appear.

  Any idea?

  Concerning

  Lothar

  Try announcement Web development / standards evangelism MozillaZine forum. The helpers there are better informed on the problems of development of web page with Firefox.
  
  http://forums.mozillazine.org/viewforum.php?f=25
  
  You will need to register and log in to post in this forum.

• ReadyNAS OS 6.4.0 - T136 (beta 4) Bug - RN314

  Just updated to the latest beta build 4 and the ReadyDLNA is still broken.

  Abandoned by ReadyCLOUD, may not have to work since the PC application but has failed to operate the link test2 Netgear, pc soft does not accept my user name or password and when he does always shows offline

  That one is sure Igor.

• change the name of the step within a sous-suite

  Hello

  I have a 'major' sequence and a sous-suite 'test '.

  Main test calls sous-séquence.

  The 'disable tracking in order' is active on the sequence of 'test '.

  During the execution of the principal I will not see what is happening in the subsequence 'test '.

  But I want to change the name of the step of the subsequence call chain.

  I tried:

  RunState.sequencefile.GetSequence.NextStep.Name = 'test2 '.

  and also with a vi included in this message.

  Hello

  If you want to rename calling step (ie. the call of the sequence), you can do either by the expression:

  Runstate.CallingStep.Name = "your text here".

  Or in your LabVIEW code:

  

  I hope this helps.

• several results

  Hi all

  I have a question on how to account for multiple results. Here is my configuration:

  1. I have 2 test
  
  
  2. I would like to report the result of the test 1, test 2 and total of test1 + test2

  Please see my attached VI

  Thanks in advance,

  That would be because you need to start training.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -LabVEW databases

  -DAQ Application tutorials

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

  The fundamental problem is that there is no element of memory (Feedback node or shift register) to store the data of several [the course

  If you select 'Test 1' default data for 'Test 2' (a ZERO) came out of the first structure of matter.  Conversely if you select 'Test 2 '.

  A pair of nodes of feedback wired through the structure of the case are required to "Remember" the last value of test.

  Somethimg like this works much better

  

  home in 2011

• Population of file tree

  Hello world

  I write the code for the user interface of a test system and I reach the project and test data in files that is already created at the beginning of the program.

  So I have a reason such as the folders with names of project and test the files into it with the corresponding command.

  for example

  Project1

  Test1

  Test2

  Project2

  Test1

  Test2

  The problem is that I can't find a way to fill a tree with this order by program, by taking the names of folders, files, etc...

  Thank you

  -If the records are already existing and that you just need to fill out and view, see this example:

  Displays the hierarchy of directories with the tree control

  -If you have to create the folders then there is an example file directory tree control

• RunState.ProcessModelClient. how to access the results of markets located in the loops?

  Hello

  In my sequence, I have to perform an analysis of the results before I have the MainSequence and return to the process template. Basically, I need to check made some steps has passed.

  I access the results using RunState.ProcessModelClient. Using what I have access to the list of results. I would like to write that I have access to each result but I can't because I spotted the results of steps which are curly are not accessible (they are not there); However, they are on the report.

  How is it possible? How do I access results in a loop? Where are they?

  K.

  Hello

  not too painful:

  the loop results in the usual place online, it's just the layout that will look like a little confusing:

  You use some revisions of my TestStand (you are in 3.1)

  

  The Runstate.ProcessModelClient is actually a copy of the space of time edit, not space running - it's the SequenceFile type, which means that even if you can see the layout of the result containers that belong to each step, they are there permanently, and not filled in this place from the moment of execution.

  At the level of the mainsequence, you're still in your client, then you can go to Locals.ResultList directly.

  In there, you have the singular element that is the result of the first and the only stage of your Mainsequence of your.

  Inside there is the. TS. SequenceCall container. It is effectivey the resultlist gait that calls (always Mainsequence) seq1 so inside that, there is an another ResultList.

  It's the ResultList for sequence "Seq1".

  Which has a single item since this sequence has only one step inside of type SequenceCall.

  [0]. TS. SequenceCall.ResultList.

  From there you can see a lot of results even if you have only 4 effective steps in this sequence.

  12 results covers:

  3 iterations of ('for' 'Test2' 'end').

  and then the last 3 items are "Test1" loop 2 times more.

  When you set a stage of the loop and include you the results of each iteration, you get these results (2 in your case) more a global success-failure based on the criteria (your care ot 100% must pass in order to study the step successful when all iterations are complete.)

  Note in your pre Expression where you change the name of the step on the fly, your labeled Test2 incremental changes the name from 'Test1' + Str (Locals.LI), and the Test1 marked step uses the same expression for this will look slightly confused that you cross your results.

  Hope that helps.

  Thank you

  Sacha

• Code error undefined-2147352567 interface LabView with a Baldor Flex + Drive II

  Undefined error code '-2147352567 occurred at the unknown "are not in documentation of Baldor or LabView.

  Error seems to happen when the ActiveX methods that the entries of evil, but to the best of my knowledge, they have.

  Has decided that it is possible that the axis has not been activated for all/check activate State I used a method of DriveEnable, it worked (code provided "Baldor test.vi"), the VI active / disable the drive correctly.  Documentation for Baldor does not seem to mention any other measure, you need to take apart from activation before using the movement commands.  Placing the jog command after that DriveEnable causes the error to return to the command of Jog (Baldor test2.vi ' ").  I'm trying to find out what is the cause of the problem, using MoveA, the MoveR, DoGo methods instead of Jog all produce the same error.

  Same error to the method DriveEnable when I try to run the code on a computer that the player is not currently attached to, leading me to believe it is a mistake of communication rather than a material error, as this is the first point at which the program tries to communicate with the hardware.  The player also appears fully functional, no errors in the Workbench of Baldor v5, orders work very well in this environment and controller to update to the latest firmware.

  Solved, still don't know what the error message is but I worked around it.

• IP camera: how to record raw MJPEG image on disk?

  Hello

  I have an IP camera, streaming images JPEG compressed. I tried to use IMAQdx get Image Data.vi to get the raw bytes and save it on the disk, but I can't produce a valid JPEG file.

  In the code below, test2.jpg is always valid JPEG around 69 KB file, while test1.jpg is still an invalid file around 65 KB (I tried settings Unicode big-endian and little-endian, with the same results).

  Any ideas?

  

  Gah, rookie mistake... I forgot to disable "prepend array or string size" to write to the binary file.

  I also don't need to convert the byte to a string array.

  Everything works now!

• VBAI and vbaiGetInspectionImage

  Hello

  We use VBAI 2012, 2012 CVI and Basler ACE camera for the inspection of vision. We want to start a VBAI CVI inspection. Meanwhile, we can start and stop an inspection of the CVI. But it is not possible to obtain a picture of the CVI. We do not know why.

  Here's our code:

  //
  RW = vbaiLaunchLocalVBAIEngine (name, VBAI_2012, 1, INACT, STRLEN);
  RW = vbaiOpenConnection (session name, NULL, 0, & Session);
  RW = vbaiOpenInspection (Session, "c:\\test2.vbai");
  RW = vbaiStartInspection (Session);

  Create an image
  image = imaqCreateImage (IMAQ_IMAGE_U8, 0);
  RW = vbaiGetInspectionImage (Session, NULL, 1, 1, image, &Flag);)
  RW = imaqDisplayImage (image, 0, TRUE);

  Unfortunately, we always get a false flag and never an image. Can anyone help on this

  Thank you

  Oliver

  Try to check the box that says "Display the resulting Image" just above the market on the right. I think that this could be the problem... If do not display you the image, we have not an image back to you. Step using the GUID for the acquisition stage would also work. Let us know if this is the case and I can have is Knowledge Base.

  Thank you

  Brad