Text Anti-Aliasing at the Application level

Similar Questions

• Weird * stretching * text anti-aliased in the Textbox

  I use Flash 8 (actually with CS3 but all recording mode Flash 8 and use AS2.) I'm also kind of new to the present).
  I have a button that loads a dynamic text in a text box using this actionscript:
  
  on (release) {}
  loadText = new LoadVars();
  loadText.load ("sometext.txt");
  loadText.onLoad = {function (success)}
  If (success) {}
  trace (Success);
  _root. TextBox.outsideFilename.htmlText = this.externaltext;
  }
  };
  }
  
  Loads of everything very well - EXCEPT when I choose "Anti-alias for readability" (and use a non-standard font and integrate some character sets) all the text in the text box out elongated vertically - it comes out looking stretched for some reason any. Is this a normal behavior? Looks terrible and not what I want. If I don't choose to be the choice of "Smoothing", while proportions are correct them all, but not anti-aliasees of course. What I'm missing here? I would like to think proportionally correct anti-aliasing of text.

  If you size your textbox (Note: change the width and height in the Panel properties scales your textbox, unfortunately) then the text content will be stretched.

  However, scalability text works on embedded characters. This is why the scale appears only when you choose to incorporate characters. To resolve this problem:

  (1) remove any scaling of the text box. To do this, select your text and use the panel(Window > Transform) transformation to set the width and height to 100%

  (2) resize your textbox using arrow tool or the type tool.

• What level of security is the best in the OSI model, which is the application level?

  Hello

  I'm curious to know what level of the model OSI protects best against pirates, which is the application level?

  Thank you

  Johan

  Hello Johan,.

  The OSI networking reference model (ISO 7498 - 1) is designed around seven layers arranged in a stack.

  The OSI security reference model architecture (ISO 7498-2) is also designed around seven layers, reflecting a high level of different requirements in the security of the network.

  In the OSI model, each layer has its own functionality and according to which it has features of different security as shown below.

  Application - authentication

  Presentation - access control

  Session - non-repudiation

  Transport - the integrity of the data

  Network - Privacy

  Data binding - insurance / availability

  Physics - certification / Signature

• Unable to turn off anti-aliasing in the paint bucket tool!

  Hi all! Today, I have a problem with Photoshop CS6, I don't know why it won't let me not turn off anti-aliasing in the paint bucket tool. The toolbar shows me a gray box of anti-aliasing, unverifiable:

  

  Could someone explain how to solve? It is very irritating.

  The color - indexed color Mode you cannot click on Anti Alias.

  So if you change the image in RGB or CMYK, you will then be able to use the option of anti-aliasing.

• How to change the size of the police at the Application level

  It is necessary to change the font size to the application level to facilitate readability. Is there an easy way to accomplish this requirement in the APEX 3.0?
  
  Please notify.
  
  Thank you.
  
  ~ Phyllis

  Ah, good so the police don't have to change the size on request?
  You want to just increase the size of the font of a form or a report?

  If you just want to increase the font size of everything, you can add this to your Page header...

  If you just want to change the font size of something in particular, you will need to get the CSS it refers to (use Firebug in Firefox).

  For example, to replace certain headers and data in the model 15...

  I hope this helps.

  -Chris

• Which past now and not days ago = > publication of text captions with anti-aliasing off the coast looking for really bad.

  I reported the bellows of text and I'd like to know if it happens to someone else.

  Concise problem statement:

  When you publish buttons with text or text with antialiasing off the coast, the result is very bad.

  Last project I cancelled 2 months ago and it seems good. But when I did a few changes yesterday and I published it again all the buttons and links that they looked very bad.

  I tried with different computers, where they have installed captivate and I have reproduced the bug how I show below and in any place of same problem.

  I can't show the client the changes because the evil look textfields.

  I tried to reinstall all the options, Captivate and install older versions of flash and nothing plugin, everything looks the same. Probably a windows update may cause the problem, I don't know.

  
  Steps to reproduce the bug:
  1. black background or dark color
  2. create the button and select Properties
  3. Select the text color color yellow or clear, size of large font (24-30) and transparent background
  4 publish

  Results: no text no embattled arround White halo, eat as the text. The part of the text is a bit fuzzy.

  Resemble the translucent color part of the text to produce somehow anti-aliasing is white in color.
  
  Expected results: the net image as html on browser text.

  Hi again

  Well, it give a try.

  Minimize all applications that you can see the desktop.

  Right click on the desktop, then select Properties.

  Click the appearance tab.

  Click on the effects button.

  You see an option called use the following method to smooth edges of screen fonts?

  If so, disable the option and click OK.

  Report back if you still have this option and, if so, if you erase it helps.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How to assign the value to the application-level element

  Hello

  I'm learning to APEX.  I use version 4.2.6.

  My question is, I set a text field called 'FINANCIAL_YEAR' in the login page.  I wanted to know how to assign this value to a text element of Application level (on page sent), so that I can get this value through at my request.

  Thank you

  -Anand

  anand_gp wrote:

  Yes, I created a 'text area' under 'HTML' in the 'Home' page  Who accepts the exercise of a table through LOV.  I intend to assign this value to a global variable so that this variable can be read in any of the application to filter the result set from different tables (not yet built the rest of the application).  To do this, I was intending to use "Shared components"-> "Elements of Application".  I'm still not quite sure how it works.

  Start by reading the documentation on elements of application.

  Go to the shared components > Application parts and create your G_FINANCIAL_YEAR item. Value Session State Protection Restricted - can not be set the browser so that the value is not editable by the user, falsification of URLS or scripts.

  On the home page, if there is not already a button to submit the value of the fiscal year, add one in the HTML area, with the Action as a submit Pageclick. Otherwise, you can do without the button and using submit Page in Page Action when the changed value select the parameter in the list so he can undergo.

  Then, in the section of the Page processing, create a calculation:

  Point Type: Application-level element

  Calculate Item: Application: G_FINANCIAL_YEAR

  Point calculation: After submit

  Type of calculation: Value of the element

  Calculation:

  Run the application, select a value in the list of the fiscal year and submit the page. Review of current session state in the viewer of session state by clicking on the link of Session in the toolbar developer. Select the Elements of Application in the view list, and then click set. The element of your application and its current value must be visible. You can now reference value throughout your application by using the appropriate syntax.

  You should also consider if a default value (for example the current year) using a calculation Application from the point of calculation on the new Instance and coordinate the application point and part of the homepage using point application as the Source of value or an expression with Source page element, the value always, replacement of value that exists in the session state.

• anti-aliasing using the 9233

  
  

  Hi Jeff,

  The first thing that you should start with is a guide to the delta sigma converter:

  It is the ADC that is used on the 9233. The delta sigma converter has a built-in inherent anti-aliasing filter. If you look at the dynamic features section of 9233 operating manual it will show you some of the features of this filter. The filter is a digital and the bandwidth and the stopband are calculated according to the sampling rate, you specify the 9233. If you give a sampling frequency of 50 kHz,-3 dB attenuation point bandwidth will be 50 k * 0.45 = 22.5 kHz. If all the components below 22.5 kHz will be kept completely and everything above that will be alleviated. This ensures that you will get no aliasing.

  If you apply a 20 kHz filter after that you'll still good data because the threshold for the anti-aliasing filter is greater than the maximum sampling frequency (50 kHz).

  Please let me know if this clarifies this question a little better.

• push an anti-pop outside the application

  Hi all

  My application has a timer running on the background, I want to raise a popupScreen after 2 minutes off the screen of the application. Do you have an idea to do?

  Thanks for the help

  read this:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...

• Problem with anti-aliasing on the text fields scrolls

  I am building an application using FlashBuilder and currently running on the latest version of Mac OS x, and test my application in the anti-discrimination Act.  I see the strangest problem; I have a large window, and I use scrollrect to view different parts of the window. When I set the scrollrect and it works very well, the window scrolls to the top just as you expect. But "BOLD" text on the screen becomes much more ugly after I scroll.  I tried to set CacheAsBitmap on the sprite containing that scrolls, but that has no effect. It affects the text that could be in the middle of the window and just move upward, slightly; all of the characters in the text has ruined the subpixel antialiasing.

  Is it a weakness known use ScrollRect? How can I work around this problem?  I tried to turn on cacheasbitmap for all my sprites, but nothing has changed. I tried to set the AntiAliasType my TextField in ADVANCED, but which has also had no effect.

  It is confusing to me, why the rendering is so bad after a scroll. Even when I go back to its original position (scroll down, then upward), the text is ugly. It's almost as if he shot it twice on the screen, but it's probably just a lower level of text rendering.

  Any guidance would be greatly appreciated.

  I've identified the problem. It is caused by a bug in my code, which is the double drawing of text on the other fields. When you have a large font size which is antialised, when you draw a second copy on the top, the aliasing allie to ruin the sweetness of the police. It is the only clue you double drew an object! Very interesting question in vector graphics, can not say once easily when you drew something twice!

• Are there plans on improving/adding text anti-aliasing for Windows in future versions?

  Are there plans on improving what the text looks like FF on Windows desktop?

  I learned that it is based somewhat on ClearType, which I confirmed after seeing some differences in the way in which the text is rendered after changing the settings several times.

  The attached screenshot shows the best I could get FF 33.1.1 and 35.0 to return. It is particularly painful on Web sites that use a type of extremely large or small, it's awful.

  P.S. I hope this is the right place to ask about it.

  Please update your graphics driver to get the best rendering of text: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24329

• I need a PKI authentication at the Application level

  We are in 11g; APEX 4.2

  Thank you

  There is but I don't think this is an appropriate forum to address this issue, if you want to talk offline we can, but I would refrain from talking more about it in this open forum...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• In any case for the value Compenent of the list is NOT anti-aliased text?

  As you may know, pixel fonts are tiny size, specially created for NOT being anti-aliasing. Use you the size of 8, with anti-aliasing pixels, the value "bitmap (no anti-alias) '.
  
  But I can't find how to specify this parameter for a list item type. I can incorporate the police and get to use the police, but he alias against it. Any ideas? Thank you

  Nevermind, it seems that the clip that the List component was inside was not aligned to pixels the same.

• change anti-aliasing effect through several layers of text?

  Hi, this might be a weird, but I was wondering if it is possible to change the anti-aliasing of 'pointed' to 'strong' through multiple layers of text. I have exported an illustrator strongly stratified as a .psd file preserving the editability of the text, but am really unhappy that the default value is 'pointed' to both the letters and the kerning. Maybe there is something I should be doing in illustrator before exporting? Select and change the effect of anti-aliasing of the type on each of these layers (there are many) is going to be tedious.

  Thanks in advance for any advice.

  Erika

  With the type tool active, select the layers that must change in the layers panel (SHIFT - and control - click on them to highlight at the same time). Then simply change the smoothing parameters in the options bar, and all the layers should change. It works (at least) CS2, 3 and 4.

  You can even use Select menu > all layers if you are really changing all of them.

• CC of the Illustrator's anti-aliasing to white (?) on the edge of the exported TIFF

  Example of how to reproduce the problem is quite simple:
  On project empty to create rectangle in any color (let's make it green).
  Export to TIFF with any anti-aliasing option turned on.
  Exported TIFF gets extreme right and bottom line lighter pixel, because it would be anti-aliasing on the edge with something white.

  How can I get rid of this and make these same two lines at the top and to the left (no lighter color). I need to sample for tile seamless and the only way to be, I found for a moment is 'manual' correction of these two lines in any bitmap image editor.

  Same problem is with JPG and PSD export. Export WMF gets white line at the bottom (not lighter green, but white). Export BMP rectangle gives solid green without lighter lines, because I want it to be.
  As I do a tile seamless for printing on fabrics, I need to format PSD or TIFF with ICC profile. Of course my tile is not as simple as the clear green rectangle, but it's easier to reproduce the problem I found.

  Try another resolution, as a multiple of 72; 288 ppi.

  300 / 72 = 4, 166666666666666666

  Is not a round number, causing anti-aliasing.