Text box says change randomly

Similar Questions

• Acrobat DC comment text box default change

  Hello, since the last update for DC Acrobat Pro, we found the properties for the text inside our commentary on the text boxes is no longer to save. You must continually change again and again. Even after following the proper protocol. The method of changing the properties of the default text for the text boxes commenting has changed? Or, is it a bug that will hopefully fixed in the next few days?

  Please note that this issue seems to be with all those of my colleagues, as well, who have updated the software to the latest version.

  Thanks to you all.

  Hi JNoerper,

  Could you please if you are referring to the text box in the comment section?

  Here is the screenshot:

  

  If you are referring to the text box above, I want to mention that a bug was noted for it and our team is working on it to fix it.

  Thank you for patience.

• How can I make the text in all the boxes down following objects when the text box is changed from 1 to 2 lines?

  Hi people Muse.

  I'm faced with a problem of text box:

  At the bottom of my page, I have the title "ACTING ERMUTIGEN ZUM". Without any manual adjustment, I was happy to see that the text box pushes down the following objects as soon as the title Exchange of 1 to 2 lines. Point out clearly: I didn t add any point to stop or change any additional settings to achieve this, it just happened automatically and that's exactly what I want to happen.

  To my confusion, I can´t find a way to apply this behavior for the second title 'COURAGE OBSERVES UND LOSEN. It s on the same page. When I drag the breakpoint controller in the design-time view from the left to the breakpoint 900 pxor do it in the browser after export of the site, the title changes from 1 to 2 lines, as assumed, , but then the next Don t objects react and stay in the same place they stay when the title takes only 1 line.

  You will find the site on businesscatalyst:

  WILLKOMMEN

  I´d appreciates your support very well. I m sure it s not a big problem, but after an hour of re - try and control and do not receive a millimeter in advance, I thought, he could be one of these 'Don t worry - here comes the solution'- Muse hero there, read this. What you...? ;-)

  Thank you in advance.

  Moritz

  –––

  1st Title: everything works fine...

  

  

  –––

  2nd title: the 1200 px BP do everything ready...

  

  .. .but as I drag the marker of BP to the left just as I did with the title 1, the 2nd title doesn´t lower content:

  

  If you set the text block "ZUM ACTING... "sensitive width via the resizing control, rather than"Stretch to the width of the browser", which will provide the behavior you're looking for.

  We will study the design compared to the difference of the browser view. It seems that how items are grouped in resizing behavior is different in the case of elements with parameters width Resize mixed, in the mode of creation of the Muse and the browser.

• XI - leading moves when opening a text box to change

  Using Pro XI - I am changing a word but the cursor in the text box moved around a line of half off top and bottom I can't focus on the word or line. Other areas of text in the editable document normally. Everything is good, when I use Acrobat 7 Pro. This can be corrected? Thanks in advance.

  Resolved - the original document contained in form fields. I looked and the form fields are overlapped. Once this has been fixed, the text is editable.

• EP 6: change the size of the text box without changing the font size?

  OK, it took me awhile looong to finally install PES 6 (from 4 PES) and now it's been a Loooong time that I used it.

  4 PES, you just had to click on the text tool in the text box to see the squares bounding, and you can make the changes. In PES 6, it seems the only way I can get the bounding box to show is now with the tool selection... which of course does not change the size of the font as well.

  I did beaucoup Googling etc and that you can't find the answer. Help, please. I'm not a PSE newbie by any means. I used it for scrapbooking widely in the past which included a LOT of text resizing box... but it seems that 6 is designed differently than 4 and it is NOT intuitive at all. I've figured it out at some point, but it's been too long... > 1 year.

  Please help... need to finish scrapbooking for Christmas gifts...

  I wonder if what has been improved in later versions?

  OK people... it seems it's on my own computer performance issues! To do a break more significantly on areas bounding while using the text tool. I was so rushed... I had mice on and if something didn't happen immediately, assumed that he would not. Sorry for the trouble, but maybe this will help some other impatient soul like me!

• Change size of text box without changing the type...

  Hello

  Hope this finds you well.

  What is the right way to resize a text box? I read that you are supposed to choose the type, and then hold down the command key, and then change the size. However, sometimes it works and sometimes it doesn't. Any thoughts?

  I appreciate your time and look forward to hearing back from you soon.

  If you want to change the size as well as the box, use the key command key. If you just need to change the dimensions of the bounding box, while leaving the type of the same size (which causes reflow), just hover over a corner and click drag to resize.

• Text box comments: change font size

  Hi all

  Commenting on a PDF with a text box (Tools > comments and annotations > text box tool) I don't see how to change font attributes (size, color, font name, etc.). Bold, italic and underlined are there but not the other standard font settings.

  I know copy you / paste, but it's not always convenient.

  Any ideas?

  Thank you

  David

  Open the properties with ctrl-e.

• framed color box color changes randomly - with red, blue and yellow

  Hello

  I want the user to do something when the color box changes from black (ready) to green (together), then red, yellow or blue (go). The user wil know what colors come to them.

  The user will will push a specific sequence of buttons depending on the color.

  Success will push the sequence of buttons assigned to a specific color. There are 16 push buttons. (this is to recall and response time)

  In any case, I can write the program without problem.

  The user can test red (push a specific sequence of buttons according to red), then blue and yellow. I can get to repeat a color so they will make four tests.

  Sorry for being long-winded.

  My question is how I randomly generates a color to begin a trial.

  If this set of tests is unclear by the subject on go the color was presented randomly as a guest.

  Any help would be greatly appreciated!

  Thanking you in advance,

  NK

  If you have a fixed set of colors, put them in a table and generate a random number between 0 (Array Size-1) and an element of the matrix of the index. Multiply the random number (0-1), multiply by the rounded and maximum value at most closely to get your index.

  If you want to generate a truly random color, use the RGB color VI and wire 3 random numbers between 0 and 255 to generate a random red, green and blue component like this:

  

• By selecting the text box to change the text field

  I worked on a form to allow suppliers to fill their reports of endoscopy online.  I'm trying to do something very simple.  If a user selects a check box change the value in a text field.  Either we allow the code to run once.  It will change the value once - even if I think it's to set an incorrect value in the code - but that is neither here nor there at this point.

  Here's the code that should work in my opinion.

  Form1. EndoscopyPage1.TestChkBox::click - (JavaScript, client)

  If (this.rawValue == 1)

  {

  TestTxt1.rawValue = "ON"; the user cannot enter field

  }

  on the other

  {

  TestTxt1.rawvalue = "off"; the user can enter the field

  }

  I tried the following as well

  If (TestChkBox.value = 0) then

  TestTxt1.editValue = 'Off ';

  endif;

  If (TestChkBox.value = 1) then

  TestTxt1.editValue = "ON";

  endif;

  I have attached the file as well.  My trial fields are in the middle of the first page.

  It's just a typo. You typed rawvalue rather than rawValue "V" must be upper case.

  See the attahed to the snap.  It works for me after you change this property.

  Nith

• Use the value in the text box to change the visibility of a button

  I have two fields that I work with.

  -The first is a field of text called 'Code '.

  -The second is a button called 'Show '.

  I'm looking for - when a user types in 8495498 in the 'Code' 'Show' visibility is set to visible.

  Here's what I'm trying:

  If (this.getField("Code").value == '8495498') {}

  this.getField("Show").display = display.visible}

  else {}

  App.Alert ("incorrect")}

  However, it keeps returning the alert app even if I type in 8495498. Someone help of mind?

  What follows is designed to be the custom script to validate the Code text field:

  Get a reference to the key

  var f = getField ("Show");

  If (event.value) {/ / leave the field empty}

  If (event.value = "8495498") {}

  f.Display = display.visible;

  } else {}

  f.Display = display.hidden;

  App.Alert ("incorrect");

  }

  }

• Pages is not track changes inside the text boxes?

  I try to use Pages, industry changes, but it seems to be limited to body text. If I include images deleted, or if I change the text inside the text boxes, no changes are followed. What is a limit? (Version 5.6.1 of pages)

  See this thread for an answer from VikingOSX, the short answer for the current Version is no.

  Pages ' 09 fact.

  Track changes in text boxes

  You could always suggest via Contact us Apple to add this feature in the news

  http://www.Apple.com/feedback/pages.html

• Using paint and how to change the text box.

  How can I select a text box that you want to modify in the paint - Windows 7 Home Premium?  Once I leave the text box I can't select again a second time to change the text or grab it to move... I must be missing something very simple?  Is there a manual program somewhere?  Yes, the zoom is 100% and I am the administrator.  Thanks for any help!

  The painting is a very simple program and does not support the re - select a text box to change the content.

  "mikecvista" wrote in the new message: * e-mail address is removed from the privacy... *

  How can I select a text box that you want to modify in the paint - Windows 7 Home Premium? Once I leave the text box I can't select again a second time to change the text or grab it to move... I must be missing something very simple?  Is there a manual program somewhere?  Yes, the zoom is 100% and I am the administrator.  Thanks for any help!

• InDesign script for a text of color replace all other lines in a text box

  I have a very long list of names I need to alternate the color CMYK, all other rows value.

  I found this script on another thread to adobe changing the hue of every 3rd line:

  var i, p; for (i=0; i<app.selection[0].paragraphs.length; i++) { p = app.selection[0].lines[i]; if (i%3 === 2) { p.fillTint = 50; } } 

  I tried to change the script to change the value of CMYK, do this:

  var i, p; for (i=0; i<app.selection[0].paragraphs.length; i++) { p = app.selection[0].lines[i]; if (i%2 === 1) { p.colorValue=[0,100,100,0]; } } 

  But using 'colorValue' is not supported. How can I change the script to do all the other lines in a text box to change the value of the color?

  var i, p, color;
  for (i=0; i		   

• Highlight the area of text disappearing when a variable is used in this text box

  Dear all

  I spent ages setting up a quiz in Captivate 8 allows partial scoring on several slides and then provides feedback to the accepting of a quiz on correct/incorrect responses.  Because the partial scoring options from Captivate are so limited, I had to make abundant use of the advanced Actions number of (a) the number of correct answers (assigned to a variable called "c1") and then (b) if some but not all the answers are correct, display a text box stating the number of correct answers.  The text in the text box is simply "You got $$ c1$ $ right." and results in the text box saying 'You're right' 2 If c1 is 2.

  However, for some reason any highlighting in the text box turns off if I put a variable in there.  For example, if the text box has the normal orange highlight given to partially correct captions, this nail does not appear if I include the variable, but it does not appear if I simply say "Partially correct.".  Does anyone know how I can fix this you problem?  I have searched previous questions on this site and on the internet but couldn't find anything.  I also tried to clear the cache of Captivate on my computer, but it does not help this problem.

  All the most popular thoughts.

  Simon

  Replacement of the legends of forms for SFH is only available since this version.

  The only interactive object that can be added to a question slide is the form button.

  Buttons on Question/Score of Captivate 6 slides? -Captivate Blog

• Text cannot be changed once I put it to the point!

  I've used Photoshop for years, so I know not all bases.  And I've never seen this before.  I created a document with pictures and text boxes.  Everything was going well until then.  But when I went back to reformulate the text boxes and change the color of the text, I couldn't do it.  I tried everything: don't forget that the layer is selected, make sure that I have the active text tool and click anywhere in the existing text.

  Nothing to do.  No matter what I did, he insisted on starting a new text layer.  I couldn't access the text itself to change.

  I could turn it or move it, but it wont let me change the text itself or the color of the text.

  I use the cloud of PS version and running Windows 7.

  I stumbled on this a few weeks ago and restart my computer has solved the problem - or so I thought.  Apparently he didn't fix it permanently.

  Help, please!  This was yesterday and my client is naturally not amused.

  Thank you.

  All text with live text layers that can be edited have a "T" icon

  The layer call you "spinetext" is not a text layer; It may have been a time, but it was pixelated and is now just pixels, the text is not alive.

  Simply recreate the text on a new layer and don't rasterize it. Leave it as a live text layer, so you can change it in the future.