Text display problem...

Similar Questions

• TEXT DISPLAY PROBLEM IN CAMERA RAW

  Hello

  I have a text display problem in Camera Raw. Where there are labels of boxes that need to be checked, for example in the preferences or settings to be pasted to another file, the text is unreadable print. What happens is that he takes to the bottom of half of the top line and half top of the bottom line, rather than by extending the line if the text is only on a single line. It is a problem for me to see all the options. It's the same on all the text of the label within the program.
  
  I have attached a few screenshots to illustrate the problem.

  Any ideas would be greatly appreciated.

  Thank you very much
  
  Carl

  The problem is not with the size of the screen, but with the "pixel density" (never forget, that the density of physical pixels of the monitor is indicated). Right-click on the desktop and select Properties (or go to control panel and select display). On the Control Panel, select Advanced; the general Panel contains the DPI setting. I guess that the parameter is now greater than 96 dpi.

  I created a thread on this problem, which must have been at least two years ago. The answer was, as 1. Adobe will solve the problem, 2. It is a problem only with the classic Windows style (under the appearance tab). I have not tested with the XP style, because I prefer the classic style; I'm cursed and live with this shit (my setting is 120dpi).

  BTW, this may be much worse than half-readable labels: buttons, fields, text can disappear completely (you may even not notice, that there should be other buttons and the Panel options)...

  Gabor

• Text display problems - glyphs instead of letters

  I have a new MacBook Pro (retina, 15 inch, mid-2015) has problems of text that appears on a regular basis.

  It displays as glyph lettering more highlight in Safari, but here is an example that I found within the iTunes Store.

  

  Is there anyone who knows how to fix this?

  Thank you very much

  Alex

  Please, back up all data before proceeding.

  Launch the application book fonts and validate all the fonts. You must select the fonts in order to validate them. See the built-in Help and support article for instructions. If the font book detects any problems, solve them.

  Start in safe mode rebuild the font caches. Restart as usual and test.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or the boot volume is a software RAID, you cannot start in safe mode. In this case, ask for instructions.

  If you still have problems, then in the font book menu bar, select

  The file restore Standard ▹ fonts...

  You will be prompted to confirm and then enter your administrator login password.

  Also note that if you disable or remove built-in fonts, for example by using a third-party font manager, the system may become unstable.

• A single site is text display problems, but it is not the case with IE.

  The text does not appear on a single website only, and only in a part of the site and there seems to be only one type of text.

  http://WOL.JW.org/en/WOL/h/R1/LP-e

  http://WOL.JW.org/en/WOL/b/R1/LP-e/NWT/E/2013/45/14

  It is the Bible, and the text of the Bible is the only part that is not displayed correctly. I uninstalled and reinstalled.

  FF 40
  Windows 7 SP1 64 bit

  IE displays the same site and the pages correctly.

  
  

• Text rendering problem ADE 2.0

  I am using ADE 1.7 with EPUB on my PC. Yesterday I updated to 2.0, but it seems to have some sort of a text display problem.

  http://i.imgur.com/ZihT8.PNG

  As you can see, the text has a kind of a resolution problem.

  When I adjust the size of the window, the text seems to change with him too, change it with each pixel pixel-clutter I move border group. Justified text or an alignment, it is not serious, nor the size of the font, I choose in ADE (best appearance larger sizes of fonts, but they still have that problem). Cover photos are so pixelated.

  It seems that if it resizes each line or something.

  I have an ATI HD5670 video card, with the most recent driver if that helps. The desktop resolution is set to 1440 x 900.

  Any tips? What could be the problem?

  Geeeeez, I thought about it.

  The text looks pixelated when sidebar is open on the left (for example, the table of contents). When I close it and that the text occupies the entire window, then it is legible and perfect. I didn't even try to close, because in 1.7.2 I opened it all the time and accustomed to it.

  Then when I open the sidebar, it is not just to reduce size of the text box as he should, but trying to resize instead, then the text gets pixelated and crushed. At least that's my theory.

  I hope that this bug is corrected in the future.

• HP 15 r250tu: Hp 15r250tu display problems

  Hello

  Recently, I bought Hp15 r250tu and since I used it, I was faced with display problems (screen flickers and shows a lot of big white pixels flickering on the screen).

  However, I have been facing this problem for browsing the web and did not face problems when using my laptop to watch full HD videos or play casual games.

  I also downloaded the Intel HD from the Hp website drivers and the problem is still not resolved.

  Please, help me to solve this problem.

  Hi @tushar_soni ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your laptop HP 15-r250tu and get an error on some Web pages or glitter. Remove temp files don't help with sites or problems with the browser.

  Cookies are small text files that Web sites put on your computer to store information about you and your preferences. You can remove these preferences by following this Microsoft document Remove and manage cookies.

  Have you tried another browser?

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may require the update which could cause flickering.

  I would like to know how this happens.

  Thank you.

• Blur Blur reddish TEXT display on Win 7.

  Reddish Blur Blur TEXT displaying on Win 7, I use the system Geforce GT 630 GPU, SAMSUNG SA 350 display and Core 2, every thing was OK, but suddenly TEXT from this problem, please help me how to fix it. and don't tell me that update driver ON the type CLEAR, please help me, or I'm BLIND.  :(

  and also I want to tell u that in win XP, this problem also, but in some programs like Chrome or to certain pages only, but in 8 Win, win 7 (32 and 64-bit) are not usable now, bcz its too irritating... Please someone help me.

  Hi Ali,

  Thanks for posting your question in the Microsoft Community forums.

  To provide the proper resolution, that I would need more information on your side.
  1. did you of recent changes on the computer before this problem?

  2. when exactly the problem occurs it is browsing the Internet?

  This problem can occur because of incorrect display settings.

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  Open the troubleshooter of display quality
  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Calibrate your screen
  http://Windows.Microsoft.com/en-us/Windows7/calibrate-your-display

  Refer to the article to change display settings in Windows 8.

  
  Get the best display on your monitor
  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

• There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  Apparently, you're trying to use AirPlay to display content that is protected in a way that not only allows the copy.

• Retina MBP display problems

  I vaguely remember that there is a kind of reminder for display problems on some models of MacBook Pro retina. I don't remember the nature of the issue, nor the accurate models who were eligible. I have a 15-inch model, end of 2013, and what I see is pictured below (dead pixels). Can anyone remember if there was a recall and that this issue would be covered?

  

  2011-2013 models.

  To my knowledge the retinas did not have a reminder. However, I got my rMBP 2012 15 "screen changed due to ghosting. I do not know if Apple which is still.

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• Mac book air display problem

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

  help someone?

  Thank you

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

  Ciao.

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Display problem on my A60 Pro Sat

  The display on my satellite A60 pro features a strip of wide pixelated of 6-7cm at the bottom that hides my mouse cursor and the taskbar. The mouse is still active behind it. Mode full screen using an external monitor is seen. The group changes with my office window or active but is just vertical color bands. What is the problem and can get rid of him.

  Hello, Robert

  Have you changed anything on your device or this occurs suddenly display problem?

  I'm really in idea. If you want you can reinstall the unit with recovery DVDs. If the problem persists it is obviously a malfunction of the display. In this case, you must contact partner in your country.

  If there is some serious hardware issue please let us know.

  Good bye

• The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?

  The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?  There must be a display problem in the software.

  Have you of the 'show Talking Points' enabled in the view menu? Then you can see small white boxes superimposed on the image in the Viewer.

  

  You can enable or disable on / off power with ⌥F talking points.

• Tecra S1 display problem

  Unfortnately my tecra s1 hit the table of coffee on the ground, the screen immediately turned white. When I rebooted there was no display at all (black only)
  The computer works as I plugged on a screen external and that was very good. I tried to follow various troubleshooting guides online showing how to disassemble the laptop and reinstall the connector of the display on the motherboard, but this did not remedy the problem.

  I noticed coming from the display was a big bunch of wires going into a connector that I reinstalled, on the right hand side of the screen is a white and black wire to a connector and a pink wire that seemed to just float, I couldn't not whence he came. Does anyone have ideas on the subject of this thread or other tips that can help me.

  Thanks in advance

  Hello

  Unfortunately, mate, you won't find any manual disassembly here on the pages of Toshiba. These manuals are not for use public and designed only for the FSA.
  But I think you could google a bit and you should find a few details.

  I think that it is a display problem that I doubt that some loose cables could cause this problem
  In my view, the screen is broken and needs to be replaced
  To do this, you should get in touch with your technician ASP.

  Good luck