Text on path is not indexed by spotlight

Similar Questions

• Text on a path does not appear in exported PDF / print

  I have a file with the guide lines I typed text on paths. It seems well printed to the screen in InDesign, but when or exported to PDF format, the lines appear and the text does not. Any ideas?

  Windows XP SP3

  InDesign CS4 6.0.3

  6.0.3? First thing we do is update 6.0.6.

  Bob

• ID CS4 - text on a path does not print

  Hello experts,

  I'm nervous of preparation very big book for printing (Bible, 1300 + pages, very complicated layout). Everything was done in ID CS2 and several reprints have been OK - now I jumped to CS4 converted the book and that's problem is here. Text placed on the upper edge of the frame (through type on a path tool) disappears in PDF (snapshot included) resulting. However, the text in the frame itself is OK. Problem is that the path is a part of the textflow, so it cannot be easily replaced. It was absolutely impossible (for me) to force the ID to print the pages correctly (print or export worked). I reinstalled everything suite CS4 - and now about 75% of cases are OK the rest once again not. (before reinstalling nothing of the text was OK...)

  I can't change the layout or positioning of executives because ID will begin to recompose the text (works by this composer CS4 sometimes differently compared to CS2 ) is very risky because of the necessary additional proofreading. I can't yet go back to CS2 document - tried by INX double conversion - failed - text mentioned above is still invisible. And the original document from CS2 cannot be used because of the hundreds of corrections for new edition that all of them were made in CS4. So now what to do - I would really appreciate help from experts.

  Vlad Jurco

  Very well. I got the file and looked it over. Here are my findings:

  There seems to be an obscure bug in InDesign.

  Here's what happens:

  Vlad sent me a 178 page document. Most of the text flow between

  single and multiple blocks of text column, with under section headers

  text on the path of several blocks of text column beneath them. The

  first of all, 89 pages exported correctly. All pages from the 90th

  page exported without text on the path.

  (1) it does not appear that corruption of the text boxes. I created

  new images with text on path and text exported still hurt.

  (2) it doesn't have to do with the length of history. I have

  divide history in the Middle, and the same text was still missing on

  Export

  (3) export (text marked, etc.) Changing settings do not seem to

  have an effect.

  (4) the export of parts did not help.

  (4) after the split of the text, I removed all pages before the

  problematic page and the missing text was all there on the export.

  I conclude that this is a bug involving

  (a) text on a path

  (b) that belongs to the text Threading

  (c) on page 90 and on.

  If anyone is interested in building a new doc to confirm this; be my

  Comments!

  I see two ways to solve the problem.

  (1) divide the documents all less than 90 pages.

  (2) cut the text of the text on the path and paste it into the new text frames

  (while removing the paths of the Threading).

  Since there are a lot of Mid-page overlap heads; If you were building

  This from scratch, I would recommend using column flow here: http://www.in-tools.com/plugin.php?p=4

  Substances

  http://www.in-tools.com

• Adding library folder returns an error ""this network location cannot be included because it is not indexed.

  I'm trying to share my MUSIC on my Windows Home Server (WHS) folder in my music library.  Here's how my MUSIC folder is organized:

  MUSIC
  -> Songs1
  -> Songs2
  -> Songs3
  -> Chansons4
  -> Chansons5

  Quite simply structure, so thought that this should not be a problem. If I add the entire folder to the library only 1/3 of my songs are listed. In trying to understand what is happening, I found that only 2 to 5 subfolders under the MUSIC are included (songs.1 and chansons5).

  Again, I deleted the folder "MUSIC" from the library and then add each indivually subfolder. What I found is I might add 2 subfolders (songs.1 and chansons5), but adding that the 3 other subfolders returns an error message, "" the network location cannot be included because it is not indexed".  If I add a new folder under MUSIC I can't add it to the library either.

  I think it should have some type of security or user problem, but can't think of what it would be, since some of the subfolders under the MUSIC can be recognized, while others, including the new folders cannot be added. Someone at - it suggestions?

  I would add that I have no problem with adding my video or picture file to my WHS library.

  Problem has been solved - thought I would post an update if someone of another encounter this type of behavior.

  By continuing to try to understand why only the music files on my server would not be updated I fell into my "homegroup". I checked the settings and noticed that 'MUSIC' was not checked in the "Shared libraries and printers' (don't know why or how). I then checked the box and now I can move my files on the server and the path is updated in the library.

• Problems Photoshop CS6 text and paths

  Hello, I can't find an answer to this.

  I am unfortunately quite new to photoshop and im trying to create a logo, perhaps I should have used illustrator instead, but my problem is the following:

  I created a path, a circle and were able to put text around it. but now, when I try to change my other text on other layers, the text tool ALWAYS comes back to that path on the layer that has the text on the circular trail and I can't select text on other layers.

  How am I supposed to select other layers/text/deselect text on path?

  Thank you

  

  You double click (red arrow) to change the type?

  When you do the line is highlighted as shown in the bottom example.

  In addition, if you are not accurate by clicking on a layer and chose the tool move with automatic selection in the options bar, you can choose the wrong layer by mistake.

• How to add text/solid/shape at specific index?

  Hello, is it possible to add shape/text/solid to a specific index in a publication? As for example a publication has 5 layers and I want to add a solid to index 3 rather than at the beginning layers as it does by default. The definition of solid ID after I added it does not work, because as its readOnly.

  As much as I know there is no way to change the index while creating a layer.

  Look in >. Page.87, there are a 4 methods to meet your need once the layer is created.

  App.Project.Item (index). Layer (index) .moveToBeginning ();

  App.Project.Item (index). Layer (index) .moveToEnd ();

  App.Project.Item (index). Layer (index). MoveBefore (targetLayer); targetLayer is an AVLayer object, then you should try this way: targetLayer = app.project.activeItem.layer (index);

  App.Project.Item (index). Layer (index). MoveAfter (targetLayer);

  I almost forgot that the script can use app.executeCommand (app.findMenuCommandId ("shape layer")); to add a shape layer just above your selectedLayers. I don't remember, but maybe that this feature is supported after AE CS6

• create new folder, but the path does not exist.  That's why I need to create!

  I want to take their existing case files, wallpapers and move them into a new catalog LR, jpg_edits.  In the import window, I left click on the parent, my photos and get 'create a new folder '. After which a new folder creation box opens to display the ms mode my file Explorer and the parent.  But he says to Select a folder, so when I try to type the new name, they tell me the path does not exist.  Which may be the reason I'm trying to create the new folder.  Everything seems to be able to do is to slect the existing folders.  Where is the creation of a new part of catalogue record?

  If I understand the question, you want to create a new destination folder in an existing parent folder. Fix? Once you click the folder parent in the Destination panel (left side of the screen to import), expect the top of the Destination table. You will find two elements here. The first, in the subfolder, allows you to enter the name of the new subfolder to create but it must ensure that the box is checked. Select the check box and enter the name of the file in the text field. Then, select the option in a single folder drop-down organizing. With these options, you will see a new subfolder in the tree under your (grey) selected parent folder. Even once all this is done on the right side of the screen to import.

• Convert text to paths

  Hello everyone, I'm doing a script that converts text into paths, but could not find a method to do this, can someone give me a tip or a sample only as a starting point?

  Thank you very much

  According to the methods of TextFrameItem is createOutline(), which is the command to use.

• Cannot paste text or paths and text

  What's wrong?

  I have a layer with paths and lines of text.

  I copied some paths and text and tried to paste in another layer or document; the paths are not glued and all the text becomes a single line.

  When I copied only the paths, it is pasted correctly.

  If I copied the text and tried to paste in another layer or document, the text becomes a single line.

  

  If I drag the selection to one layer to another using the Panel, it works. If I drag the artboard to another document selecting, it works.

  But sometimes, these operations are not practical.

  What I would like is to copy elements, target a layer in another document and paste there.

  With a large document with tens of layers and lots of text, the drag and drop is not possible.

  What system?

  Are you using an extension of the Clipboard in your system?

• Site search path does not have to go to the results page

  BC instructions say to edit HTML code like below - to make a path to the results page.

  I see that?  This path does not to the results page, it goes to the default template page instead.

  < div class = "box" >

  <!-Search->

  < form name = "catsearchform50358" method = "post" action = "/ Default.aspx?" SiteSearchID = 2796& amp; / search_results.html' > '.

  < div class = "search-box" > < input class = "cat_textbox_small" type = "text" name = "CAT_Search" id = "CAT_Search" / > < input class = "cat_button" type = "submit" value = "search" / > < / div >

  < / make >

  < / div >

  <!-/ Search->

  Hello

  From what I see...

  ' / Default.aspx? "SiteSearchID = 2796 & / search_results.html" >

  Should look more like this...

  ' / Default.aspx? "SiteSearchID = 2796 &ID =search_results.html" >

  Reference: http://kb.worldsecuresystems.com/200/bc_2007.html#main_Redirecting_Site_search_results

  If still in trouble please provide the URL of the page so we can test further.

  Kind regards

  -Sidney

• 6.3.1 Department does not not indexed search.

  Hello
  
  I would like to use the access log to monitor the use of research not indexed. I think not wrong in saying that these should be always connected, as a result, with the text "notes = U'. '. This text can then be monitored by using the logconv utility report.
  
  However, I ran several tests where I specifically search attributes indexed and only the unindexed attributes. All these searches appear in my access log, but none have a nonindexed indicator.
  
  I'd appreciate any help to work on what I need to do to enable the logging of research not indexed.
  
  Thanks for any help.

  Searches are probably indexed. If your database has less to allidsthreshold (default: 4000) entered subordinated under the container dn that you specify as the base for the search DN, the index system (parentid/ancestorid, depending on whether you use one or void) will cause your search is indexed regardless of which is the filter. Try to add enough entries under the base dn for the token allids put in the index system.

• The shortcut error message: the specified path is not; Maybe reinstall Firefox whenever I want to use.

  When I install Firefox, it works very well. Installation does not include a shortcut on my desktop, then when I try to start it again, I go to "all programs." Next, I get the message "the specified path does not exist. I think it has something to do with the confusion between two hard disks. C: drive, a small SSD, contains the operating system and other software. D: drive is my data disc, contains other applications, photos, music, etc. The way referred to in the error message is D:\Program Files (x 86) \Mozilla Firefox\firefox.exe.

  Firefox does not have the ability to choose a disk for installation. Is it possible that it is automatically installed on the C: drive, the shortcut continues to send on the D: drive?

  If you have any ideas or suggestions, I'd like to hear them.

  Using your file browser, look for Firefox in c:\Program Files (x 86)
  After, look in other files of the program (x 86)

  Once you find it, click with the right button on Firefox.exe and create a shortcut.
  Move it to your desktop. It work?

  Note: In the creation of shortcuts, you can without spaces. Instead of use;
  c:\Program Files (x 86), you should use; "c:\Program Files (x 86)".

• shock wave. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder

  Shockwave for Director 12.1.1.151 does not start, just with that. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder. Reinstalled but made no difference. If you can help would be grateful. Thank you.

  I restored my computer to an earlier version, installed latest version of firefox and the Shockwave for Director, everything is fine now. Thanks for your help guigs2.

• My Apple Watch gets my texts &amp; SMS but does not appear on my iPhone its synchronized with

  This happens not all the time but it's embarrassing seriously. I check my phone before I check my watch. Sometimes, the watch will get all my text messages and my iPhone will miss 1 - 3 on the texts but my watch will bring them. But my watch told me that they got their. So I finished due to lack of texts cause his were not on my iphone6 I tied him to the watch. This is a business so phone when I'm bored of texts cost me money. So, how can I fix this so that the matched iPhone becomes all messages text as it used to. I had to make sure to check that my iwatch first before my phone and for me that is very annoying. As I want my phone to be the main thing I text of.  Can anyone help?

  Hello

  How notifications behave depends on the State of your devices. In order to provide notifications to your attention as soon as possible:

  -If your iPhone is unlocked, you will receive notifications on your iPhone instead of on your watch.

  -If your iPhone is locked or mode and your watch is unlocked (regardless of the question of whether the screen saver is awake or asleep) and on your wrist, you will receive notifications on your watch.

  -If your watch is locked or allowed to do not disturb, notifications will be sent to your iPhone.

  More information:

  About notifications on your Apple Watch - Apple Support

• Satellite L655-1john says error "the path network not found" when starting

  I just bought the laptop above and I did all the stuff he wanted to start and now when it is in the login screen and I go to my user and press ok while I connect it gives me the above message "the network path was not found"

  I have windows 7.
  Does anyone know what I'll do?

  I m confused now.
  After the first start, you must create new account and then you can start Windows 7 preinstalled and use the preinstalled operating system. I can't even imagine that this problem occurs the first commissioning. Recovery images are tested and you can install it 100 times and it should not happen.

  Have you done some changes or anything that might be responsible for this?
  Can get you into SafeMode (F8), create a new account and try to connect with this new account? The same thing happens again?