Text overlay

Similar Questions

• IMAQ text overlay, then Writfile in the right size

  Hello

  I use IMAQ to display an image, and then I want to draw lines by using the KING and text overlay, before exporting it as a jpg or bitmap.

  Please take a look at the façade attached jpg.  It shows a part of my image of front panel and I drew a KING of the line next to the line, I added text.  It looks great.  But when I use IMAQ write file 2 or IMAQ Write queue, then the KING and the cache are not correct.  Please look at the OverlayLV - you can see the line type (only now it is green), and the text is really tiny.

  Thanks for any help!

  Steve

  Hi all

  I thought about it.  Before adding the KING and overlays, I had to re - sample the image to the size of my IMAQ indicator.

  Steve

• Slideshow module and text overlay on only one or two images.

  I read the manual, using the slide show, and I see that I can add text to images, but I want to add some text in the first image only and maybe one or two inside the view. Is this possible?

  One way:

  1. in the overlays Panel, place a check next to text overlays

  2. click on the ABC in the toolbar and select the legend or title in the menu down

  3 clear the field caption or title in the metadata (library Module) for all images of the slide show. (if necessary)

  4 enter the legend or title you are only looking for the text images.

  5. set the color, size and placement in service.

• Changing structure of file with text overlays

  (FM11 on Win7)

  Which will make the final result maintainable and brand the easy transition?

  A set of project files has the following structure:

  *. Book / / some of the expected results; Some are 'workbench' content management books

  generated files by *. Book, as * TOC.fm and * IX.fm

  ch_ *. FM / / these are chapter files that are part of the book. They include files ch_ * TOC.fm as dividers.

  ch_ * toc. FM / / these are the table of contents chapter files

  _Graphics / / a folder that contains graphics files

  _Insets; a record of text inserts. Some point to files in the folder _Graphics

  To "clean" the upper level of the main folder so that it is easier for many to share authors, we are considering repositioning:

  • The files and their files generated for a _Books folder, or perhaps a different _Book for each type of deliverable. We will create more books in the future.
  • Chapter and chapterTOC files in a new folder. We will create more chapters in the future.

  The proposed structure is:

  _Books / / contains this file .book from above, as well as its generated files

  _Chapters / / contains the following from the top

  ch_ *. FM / / these are chapter files that are part of the book. They include files ch_ * TOC.fm as dividers.

  ch_ * toc. FM / / these are the table of contents chapter files

  _Graphics / / no changes at the top

  _Insets / / no changes at the top

  Apparently FM11 does not allow a change of relative references to the graphics as text overlays. If so, I don't see this feature in the GUI. What Miss me?

  To activate the notion of change of _Chapters, I need to MIF chapter each file with a text editor such as Notepad ++ and replace old references with the new? Something like that?

  At < TiSrcFile ' < it\ > _Insets < it\ >filenameFM

  BECOMES < TiSrcFile ' < it\ >... \_Insets < it\ >filenameFM

  Move the files of the book does not seem as complex. It's the easiest way?

  1. Move the chapter files.
  2. Move the book file.
  3. Open the book file. Its chapter references fail.
  4. Add the files of the chapter of their new _Chapters folder and delete the old broken references.
  5. The book was updated.

  Just make sure to not folders at the root of the drive, i.e. C:\Books. It is the level of the 'root' of the drive. Start your whole structure a level down, for example C:\Projects\Books. FM has the bad habit to convert all the references relating to the absolute file, if the path to a file through the root of the drive. This will really bite you if you ever have to move your collection to another location.

  Text insts behave differently, because FM actually stores all the content of the Insert internally as well as to maintain a pointer to the file. Unfortunately, you will have to re - import insert or change the path in the MIF entry .

  In your current structure, you have graphs and INSET a low level of the FM files and books (relationship of the child). In the new structure, you are proposing to move them to a folder at the same level (brother relationship).

  It would probably be simpler and less prone to create new files of book according to re - organize your files and make sure that there is no reference of broken file.

• LR3.3 slideshow text Overlay

  This may be something simple that I'm just missing, but is there a way to put the text Overlay (image name) on selected images? I have a title slide, and a "end" that I'll put in slideshows I do not want the name of the image with watermark showing on. But I don't want them on all other images. Thank you.

  Extend this logic a little more away, you could use a couple of plug-ins to transfer the name of the image to a metadata field appropriate rather than having to do it manually.

  LR/carrier or

  Search replace transfer come to mind.

• secondary pages come with blurry or text overlay, help me solve

  My home page when I try and find related material, the text appears piling on each other as I can't read it without left click several times to eliminate. Very much a nuisance and will trigger all recently started

  Hello

   
   
  1 did you do changes on the computer before the show?
  2. you receive an error message?
  3. using Internet Explorer or another third party browser?
  4. is the question confined with any particular Web site?
  
  If you are using Internet Explorer then you can try the steps outlined in the methods:

  Method 1:
  You can optimize Internet Explorer and check:
  How to optimize Internet Explorer
  http://support.Microsoft.com/kb/936213/no
  Reset Internet Explorer warning:
  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  
  Method 2:

  You can also try the steps in the below link:
  http://Windows.Microsoft.com/en-us/Windows7/why-do-some-webpages-look-incorrect-in-Internet-Explorer-9
   

• Searchable text overlay

  Hello

  I was cropping a PDF of a book cover adorned.  Naturally, the recognition of text does not work and Acrobat detects the PDF file in a single image.  It would be convenient to manually specify the sections of this 'image' as of the searchable words.

  Is it possible to do something like that?  Simply highlight a section of the 'image' and specify that this section should be detected by the OCR as the word 'Tree' for example?

  Thanks much for any help!

  Rich

  Not possible with Adobe Acrobat.

• All cross references a new impetus to projects with &amp; #160, text overlays

  I work with RH 9. I produce Webhelp projects based on the FM books.

  This new book is based on the formats and existing projects.

  But one thing is new: there are many inserts of text.

  My problem: the file which includes text inserts corrupted references.

  They are underlined and have good color, but do not work. Each cross reference starts with & #160;

  What can I do? Any work around? Is this a known issue?

  If you can reproduce this behavior with a small model set of content FM, reported as a bug and send the files for the guys of the CHT support.

• How can I delete a movie already made text overlay?

  I have allowed the film and need to remove the title page and edit text across it. How can I do so by keeping the bottom? It was sent to me as a .mov file and I use adobe first pro.

  Thank you

  If you have a single MOV file that contains text, such as the lower third or subtitles, basically "engraved in" the file, right?

  Then you can not modify the part of her... it's from the film. It is "flattened" to use component a Photoshop term... it in the film. There is no way to change the text or remove it. It's one of the reasons why I work on projects deliver a text version and without... so if you need to change the text, or add it elsewhere or you can do in a foreign language.  Import the file, add your own text layer.

  Nothing you can do short jump and fitness to get rid of the text image. but then, you are affecting the quality of the video and lose part of your image.

• Question on text overlay on an image

  Hi - I'm trying to place a layer of text on a ghost image that I imported into ID of Photoshop.  I mean by 'ghost' image has a fill layer white which has been set at 50% opacity.  ID let not text be layered on top of the imported image, regardless of how many different ways I tried to achieve.  It will allow another image to be superimposed on top of text.  If I place a text block on the letter of even an image and the ghost, the red warning icon type overset text is displayed.

  I tried to apply the text in Photoshop and that works very well until the file is imported in ID, how the text looks awful, which is somehow degraded in transit.  I'm relatively new to the ID and the PS and would appreciate any useful input.

  Thank you!

  ~ Artemis

  It seems that the dressing is applied to the image or the image above, or both. Eihter disable it if you don't need it for other reasons, or for the image that you want to use on top of it, open the Options of text block and check the box ignore the skin in the lower left corner.

• Sizing of conditional font for a text Overlay on Photo

  The size of the photo is 640 pixels x 800 pixels. I can get the script working on the 9-point font, but not if the bunk is too long without resizing the police.

  Here are the main parameters of the initial script I prepared.

  var originalRulerUnits = preferences.rulerUnits;

  preferences.rulerUnits = Units.PERCENT;

  var docRef = activeDocument;

  var myLayerRef = docRef.artLayers.add ();

  myLayerRef.kind = LayerKind.TEXT;

  myLayerRef.name = "Filename";

  var myTextRef = myLayerRef.textItem;

  Set the size of the font in Points (may vary according to the length in characters)

  myTextRef.size = 9;

  myTextRef.font = "Arial";

  Text color to RGB values

  newColor var = new SolidColor();

  newColor.rgb.red = 255;

  newColor.rgb.green = 255;

  newColor.rgb.blue = 255;

  myTextRef.color = newColor;

  Set the position of the text

  myTextRef.position = new Array (50, 96.875);

  myTextRef.justification = Justification.CENTER

  Set the blending Mode of the layer text

  myLayerRef.blendMode = BlendMode.NORMAL;

  Opacity in percent

  myLayerRef.opacity = 100;

  The length of the text is based on a variable "Pnom" (concatenation of first name and surname of a database) that is written and stacked in the lower part of the photo must be a single line.

  This is an example of 9 points as the default font size.

  Here are the conditions, I don't know how to do:

  1. If the number of characters is less than 40, then use fonts of 9 points;

  2. If the number of characters is 40 to 50, then use 8 point fonts.

  3. If the number of characted is 51 and more, then use fonts by 7 points.

  Thanks in advance.

  You could try a switch clause:

  switch (true) {
            case (myTextRef.contents.length < 40):
            myTextRef.size = 9;
            break;
            case ((myTextRef.contents.length >= 40) && (myTextRef.contents.length <= 50)):
            myTextRef.size = 8;
            break;
            default:
            myTextRef.size = 7;
            break;
            };
  

• How to create a dark transparent band on an image, w / text overlay?

  Hi everyone, I was wondering what the terminology is, or how to create what you see here at Daylife?  If I know what to look for on Google, I can probably stop me.  Thank you all!

  -John

  1. open your image you want to use.

  2. draw a rectangle with the Rectangle Selection tool

  3. fill it black (any color)

  3 change the opacity (located on the layers window)

  4. place the text above the rectangle.

  -You can use the tools of alignment for perfect alignment if necessary.

  see you soon,

• Table of contents imported as the overlay of text have no active hyperlinks in PDF format

  Hello

  The model that I inherited uses a method in which the table of contents appear in the main FM as an insert text imported doc. To create the table of contents, a table of contents in autonomous is created and then imported as a text box to the specific location in the main file. When this FM file is saved as PDF hyperlinks in the page table of contents do not work.

  -Am I doing something wrong, or is - what a limitation of text import crashing like OCD?

  Thank you

  Donna

  For reasons specific to my application, I use books with a Table of contents file that imports the TOC file generated as a text overlay. And hyperlinks in the PDF file. I understand that, in general, the links in text ads that link outside of themselves are not active in the PDF file. But for some unknown reason, the links in my Table of contents work in the PDF file.

  So, I tested your case. I created a standalone table of contents for a single document (be sure to select create hyperlinks in the Set Up Table of contents dialog box) and then it imported by reference into the document. I created the PDF (print to the Adobe PDF printer) and the links work perfectly.

  Make sure that you have selected data Acrobat generated in the print dialog box, and THEN select make named Destinations in the links in the PDF Setup dialog box tab.

  I have also heard that if you apply a format of characters in a line in the table of contents, links will not work in the PDF file. It is another thing to check.

  Van

• Overlay of text using FrameScript

  I need to convert all text in a book in text overlays. The book contains hundreds of files and almost every file has a few inserts text in order to convert all INSET a text file at a time is not practical. I know how to use FrameScript to scroll through all overlays of text in each file such that it moves well the book but I don't know how to convert a text inset in the text using FrameScript. Does anyone know a way to do this?

  If you have not yet tried, you would probably get good advice on the list of the FS, here and possibly links to examples of text inserts:

  <*>To visit your group on the web, go to:

  http://groups.Yahoo.com/group/FrameScript-users/

• How to combine real-time video with LabVIEW indicators so that the video can be displayed and saved with the overlay data

  Let's assume for the moment that I can find a device for which LabVIEW has the appropriate drivers.  Is it possible to combine the camera feed with digital indicator fields so that there is a video out showing the data superimposed on the live image?

  I'm talking about something like a screen of the camera where you see the camera settings are displayed on the image in the viewfinder.  Note I have one isn't about analysis of video data or somehow reading parameters of the camera to the camera.  Data would be temperatures, pressures, speeds, etc., acquired by different instruments at the same time the video is captured and processed somehow by LabVIEW.

  No problem Wildcatherder, don't let me give you an overview of the process.

  When you get a video acquisition method entry, it will be an image format. Essentially, it's a bunch of images that are updated at the speed of video capture, just like the material. There are screws express (wizard - like elements) that simplify the obtaining of images from your video source. With the drivers and measurement and Automation Explorer installed, you should be able to get at least the image.

  If you have IMAQ toolkit, I mentioned, you could just wire the reference image (a purple wire wavy) and a text input (say, a temperature that is converted to a string) in the text overlay VI and it would produce the desired effect. Without this, you will need to convert the Image into image (these are two different data types in LabVIEW) and use the image instead, editing tools (essentially replacing pixels in 2D image data). You would then update an indicator of the photo with your photo altered, if all goes well to the pace of the acquisition hardware. As I said this is less elegant and can take a certain amount of time processor. If you view these images at all and are just their routing, it should be slightly faster.

  I don't know about video production equipment, I mainly used entry Firewire or USB, the computer screen or the file data. However, if the driver exists, it should be possible, but a quick review of the functions doesn't seem to come with output functions. Cannot advise on hardware, but you can start with:http://sine.ni.com/np/app/main/p/bot/no/ap/vision/lang/en/pg/2/sn/n17:vision, n21:11600 /?

  Kind regards

  Mello