Text-to-speech only SMS?

Similar Questions

• CP9: Microsoft "Text to Speech" - David only works

  Hello

  Poor David works too hard - no Microsoft colleagues contribute to it.

  It has to stop - whenever I have asked Hazel, Zira, Helena, Selena to help, they do nothing... it was David who must intervene and take charge.

  Other officers of speech work very hard.

  For the people of techno:

  Whenever I chose another agent of microsoft - voice of David is registered.

  Slide notes - TTS - select agent - + - add text etc.

  Non-Microsoft officials record ok.

  I use Windows 8.1.

  Concerning

  Donal.

  Donal salvation,

  Thanks for reporting your problem. We had the chance to look into your question.

  The voice that you mentioned is the default voice Windows 8.1. With the target operating system (win 8), you can select a voice as the system default and even TTS voice translated into Captivate9.  To change the voice by default, you can follow these steps-

  1) go to control panel.

  (2) open the speech recognition dialog box.

  3) click the text-to-speech option and the speech properties dialog box should open.

  (4) to select the default voice change and the same is for TTS in Captivate9.

  For more flexibility and dynamic use of the voice in your project, you can always go ahead and download the voices of Captivate_9 by clicking on the download link available in the management of the speech in captivate9 dialog box.

  Hope this helps you.

  Thank you

  Aditya Tiwari

• Text-to-speech works through headphones

  I have an iPhone running iOS 9.3.2 and text-to-speech 6 only works if a headphone is plugged. I can hear it well just using headphones, but it does not come out of the speaker, so those who are disconnected. Any ideas? I rebooted, reset and finally restored.

  Check if your speaker works. If you hear no sound or distorted sound of your iPhone, iPad or iPod touch speaker - Apple Support

  -AJ

• The word text to speech recognition works not

  Hello

  I installed a program called natural reader, which reads the text using different voices, so that you can hear what is on the page rather than just read it. I just bought the program and I can't get the voice to work. I contacted the company and they told me to go to the Control Panel/Speech Recognition and fix it on my computer because it is a computer problem.

  So when I click on speech recognition, Text to Speech (I have Windows 8 is told by the way) - and I click on the button "Preview Voice", he does not play the text at all as it is supposed to do. If I click on the audio button, speech/headset is checked. But I see there are two points lower than who say THAT NVIDIA and both say they are "not connected." And when I click on the Advanced button, "use preferred audio output device" checked. And "DT speakers/headphones high definition" is the only thing available.

  As I said, I don't know much at all about computers, but I'll add this part, just in case it might have something to do with it. I noticed that this red warning icon appears next to my videos and things like that in my files. Its something that was not there before. When I look in my windows applications he says only he X Box. I also noticed that when I open all my apps to show, little red X Box icon has one of my videos here instead of the app icon is red, which is weird, I think that? Sure on that note. In any case, I installed the windows classic interface, so I can't watch all softs tiles all the time on my desktop with windows 8 because I find boring. So I don't really know much about the apps anyway. But it's just that I did a complete system restore on my computer recently and that was not there before, at least, it was not associated with my videos. So I was wondering if this has nothing to do with the thing of the voice does not work in speech recognition? As I maybe the wrong thing associated with sound or something? I also noticed on my desk there is an icon called "Connected Music Powered by Universal Music Group" and when I clicked it, nothing happened.

  Can anyone help please?

  Thanks, Claudia

  Hi Claudia,.

  It seems that the settings are correct in the text to speech Audio settings.  I understand that the speech/headset is checked (default device).  You can try to speakers as default device (green check mark on the speaker) and check if you are able to hear the text when you click voice overview through the PC speakers.

  See the article:
  Accessibility in Windows 8
  http://www.Microsoft.com/enable/products/Windows8/default.aspx

  In addition, the red outline that you see when you click on applications, video files seems to be the Narrator running in background.

  Turn off narrator and check the issue:
  Office, press Windows + U .
  Click Spie Narrator.
  Click Exit Narrator.

  
  Let us know if it helps. If the problem persists, we will be happy to help you.

• Text to speech: is it legal to use the output into something else that "for personal use?

  I'm looking for some legal specific information about the licenses on the function 'Generate the word' hearing.

  

  I found some info here: generate speeches | Adobe Audition but I'm not quite clear on what can or cannot be done. It States, in part:

  "Your operating system has probably some voices already installed for you, which are usually for personal use only and is not allowed for use in commercial projects... »

  My question is 2 times:

  1. when he says "generally" is it legal (I suppose that Apple or shade) that can expand on this statement?

  2. by 'commercial' which covers the distribution (i.e., creating an MP3 of the voice of Samantha and sell) as well as the use in everything will be for sale or public consumption?  There is another line in the quoted doc which suggests to use to "interesting transitions and narration, or to be used in the design of the game."

  The specific use case with which I am afraid would use a voice generated on a piece of hardware, which, at the start, would be to say 'Hello!' via an mp3 of the voice - it is not a product of speech synthesis.

  Thank you for your time!

  When I was developing this feature (thanks to try), I found this question online: audio - are copyrighted by the text to speech voice Apple? - ask different

  Which lead me to go to the license agreements of real software for OS X (Apple - legal - software). You'll probably want to go yourself, choose your version and the search for "voice". You will see a similar snippet of the thread above.  Since you're screenshot is on OS X and the voice you use is provided by the operating system, I think it would be the authority in this situation.  Hearing is simply to expose functionality in a practical way.

  If you register a third-party voice (I think that we have links to some sellers on our help page), it should work in hearing. I know that I've tested several.  For this particular voice, you'll want to make sure you get a license for what is your destination.

• Can I stop the slide (text to speech) audio when a legend of quizzes with audio feedback is displayed?

  Hi there, we use text-to-speech on all of our slides, however there is a problem, we have been unable to resolve.  If we have audio on a blade of quiz that this continues to play when the legend of feedback is displayed.  This means that if a learner clicks on the answer quickly, they hear the text on the slide and the text of the caption on top of the other.  How can I stop the slide audio if the legend of feedback is displayed.  We tried shares advanced to "stop audio triggered" and experimented with invisible text captions that have audio added, but have not so far resolved.  Does anyone have an idea how to solve this problem? Any help gratefully received, thank you so much Janet

  PS We use 8 Captivate with the installed voices text-to-speech

  It is currently a common problem with audio in modules of Captivate quiz slides.

  The configuration options for interactive objects on slides of quiz does not allow the same level of control for audio playback with normal interactive objects on other slides.  (for example to be able to stop the other audio when the user clicks on something).

  The Audio triggered Stop action is often misunderstood.  But as its name makes clear, it only applies to stop an audio clip that was TRIGGERED by another action of the art.  That does not apply to background sound, slide level audio or audio level object.

  My suggestion is that you return to your design and determine which of the two audio clips (sound feedback or slide) you can do without.  Maybe your learners them useless as much as you think.

• Text-to-speech in slidelet

  Hello

  Here's my situation:

  I have an image in grayscale on a slide which is accompanied by an audio speech synthesis. I want to be able to roll on 3 areas (top, middle, low) and the bearing will be

  1. Use this part of the image to the color,
  2. set up a title next to the portion of the image that is in color
  3. have the legend read using text-to-speech

  I tried to do a slidelet to show the colored upper version, but when I put the colorful picture, he was behind the image in grayscale. I made the slidelet was above the image in grayscale in the timeline panel, but still it did not show the colored upward version.

  Also, how can I add TTS for the slidelet? When I'm in the slidelet and open the notes slide, it shows me audio for the whole slide. Any change I make seem to affect the entire slide, not only the slidelet.

  I am a novice at all this, so feel free to talk to me slowly.

  Thanks for any help!

  You can read the audio only when running which has already been recorded and downloaded.  You cannot generate text-to-speech during execution (but it would be really groovy).

  You can only show or hide the objects on the slide viewing.  Your advanced actions will not affect slides that are not currently on the timeline.

  If you want an interactive object (for example your X) in the corner of a text caption, you would need to combine these two objects (text caption and button form with an X as its text), give the Group an ID and then use the button shape to trigger a tip action that MASK being grouped.

• Where is text-to-speech?

  I am using Captivate 5.5 on a Mac.  I downloaded the software, open a previously saved captivate file with text-to-speech completed on another computer.  On this computer, I can't locate a text-voice button on the right side of the lower window.  Because I downloaded the Mavericks on my other Mac computers, I can not access my files or what should be in this window.  In my view, also missing a button 'subtitles '.  I just see timeline.  Thank you very much for your help!

  You mean that the moorings has only the mounting Panel? Have you tried to reset the classic workspace, if the workspace you are using, or switch to a different workspace? In any case, you can always open Notes slide with the window menu (hope it's called like that in Mac as well - located to the right of the menu topics). I can't translate the shortcut key in the language of Mac's on PC is CTRL-ALT-N.

  Lilybiri

• Text-to-speech - Paul/Kate won't say a Word

  I added text to speech to a presentation, I'm working on. Normally, if Paul/Kate said not a word correctly I'll play with it a bit until it looks right. However, I have a word they WILL decide if it is in itself, but when it is in a sentence they spell the word. The word is 'Internal' and here is the sentence "' to be considered as an internal auditor, an employee will be:" "

  Thank you

  Megan

  Hi Megan,

  Ive tried the same sentence here without problem.  The only thing I can think to suggest is try to remove the plugs.  I had problems where they manipulate words in capitals differently sometimes.

  It's not much, but it is worth it!  If I happen to think of anything else I'll check.

  Good luck!

• Is it possible to change the option to text to speech in another language?

  good afternoon, the company I work in several languages is spoken, English, Spanish and French and I need to create the application site in these 3 languages, but I can only convert text to speech in English.
  
  Help, please

  Hello

  Sorry, but for now CP only provides the English voice. Please file an application (form is on the homepage of these forums) ask TTS in other languages to support us, non-English speaking users.

  Lilybiri

• Is it possible to add the text to speech (TTS) for slidelets individual or other objects 'pop-up '?

  Hi all

  This question is somewhat related to this issue: http://forums.adobe.com/thread/525525?tstart=0

  So now, I have a slide with several slidelets "pop-up". Finally I intend to add human speech at each of these slidelets (under the tab Audio caption text), but at the moment (for demonstration purposes), I would like to use the text-to-speech (TTS).

  The only type of TTS option that seems to be allowed is at the level of the slide, but not inside a text caption... This seems odd.

  Speaking of weird, speech management feature and Audio seem all too weird or very limited features. The management of the speech seems to only read the text inserted by entering the slide. No other options are available.

  I know that I could save the speech as individual wave files and insert them through the Audio tab, but... It then, I thought that it would be an easier way to use the TTS in Captivate 4.

  Can I buy a clue?

  Thank you!

  Hi Shawn

  TTS works at the level of the slide. Best bet is to insert a blank slide. Add notes. Convert to speech. Then, find and rename the file to preserve you. Rinse and repeat as needed until all TTS was created. Now, they should be in the library where you can freely assign them to everything that you need.

  You answer during the lunch break on a contract job...

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Text-to-speech not installed on trial 30 days?

  I have downloaded Captivate 4 30-day trial from the Adobe website. I get the message when you try to join the slides:
  
  "The voice of inaugural of the text are not installed on your system. Please install using the Captivate DVD or download the of... »
  
  I have to re - install or what should I do?
  
  

  Hello

  This feature was not available during the early days of download Trail. I found in a Captivate Forum that this feature will be available for download only after a few days.
  You can now download and install the text to speech in your system. Which includes two voice right now.

  Earlier http://www.adobe.com/downloads/

  Select Captivate 4 drop down... which will lead you to the download page for Captivate 4.

  http://www.Adobe.com/cfusion/TDRC/index.cfm?loc=en%5Fus&product=Captivate

  Click on the link below...

  Hope that helps you find the solution

  Ranjith Kumar. Bandi

• Insert break custom text-to-speech in iOS

  When I text on my MacBook Pro I can insert a break custom TT with [[slnc 500]] and these codes. But when I insert these codes in Notes on the iPad, the TTS happy to read these codes.

  What are the codes, as appropriate, for the insertion of a break custom text on iPad for text-to-speech?

  Simply Sseems that iOS does not support this feature. Let Apple know that you want it via this link http://www.apple.com/feedback/

• Puntuation orders for text-to-speech

  Is there a list of orders of punctuation for TextEdit and or other applications to change the behavior of Text to Speech?

  Thank you

  Edited to remove a duplicate.

• How to pause the text to speech

  Hi all

  I m new text at the speech and generally enjoyed apple hear the text of PDF files, but do not know how to take a break between the two. I need the shortcut on the way to regain the text after a few breaks in between if I missed something. Y at - he of the shortcuts that I can use.

  I am currently using air Macbook Os X EL Capitan(Version 10.11)

  Kind regards

  Sangeet

  In v5.6.1 Pages and releases from previous pages, the text-to-speech feature can pause via the Edit: speech: stop talking about the menu item. However, speech will take not from where it was suspended, but at the beginning of the document, or text selection. No solution for that.

  However, you can create a script Automator single action that will transform all text selected in a Pages document in an audio file on the desktop. That support good break and resume simply control-click audio file icon.

  1. In your Dock, click on Launchpad (rocket icon)
     1. Select other, and then the Robot Automator.
  2. When the launches of Automator, select New Document: Service: choose
  3. Locate the music library from the Automator library entries
     1. Drag and drop the text to the Audio file action to the right in the bigger window of workflow
     2. Drag and drop the encoding to MPEG Audio action below the previous action
     3. Use the settings in the screenshot accompanying as a guide. I have deliberately omitted an extension of file name for the audio file to the output of the first action it will be applied after the conversion in the second action.
     4. Now, the file menu: Save... and in my case, I gave the name of Service as text2voice.
     5. Quit Automator
  4. In System Preferences: keyboard Panel: shortcuts: Services, scroll down until you see the entrance to text2voice and check to make it active.
  5. In the Pages, select as much text you want to listen to, and then in the Pages menu: Services: text2voice - send text selected to the audio file.
  6. Click the controls to play/pause/repeat on the icon of the audio file, resulting.

  Click the following command to expand the service described above.