text tool stops working after several type of layers, any idea why?

Similar Questions

• Text tool stopped working.

  My tool suddenly stopped working.

  If I try to put some text, it seems to work in what I see a bounding box and all that.

  But I do not see the type itself.

  And nuance in the control panel Gets a "?" to place a color.

  I reinstalled Photoshop CS4 and it still occurs.

  The only cases I can think it could possibly is 1. I had a recent update to Acrobat and 2.  (and that's when it happened) I copied the text from Illustrator and tried to paste it in Photoshop. Don't know if one of these two is weird but I thought I would mention it.

  I'm on a Mac Pro 2008 with 8 cores, 16gig or ram running the latest updates for Leopard.

  Can anyone help? Not being is not able to use the type in Photoshop is a disaster.

  Have you tried to reset the text tool?

  

• AirPlay has stopped working after several months of STR DN850

  My Sony STR DN850 has worked perfectly with AirPlay for 8 months. When you use iTunes on my iMac or my Mackbook pro, I just need to play a song, and my receiver turns on and play the song. Now the small speaker selection box at the top of the window of my iTunes isn't even - probably because iTunes is not picking up an Airplay compatible device. I use Mac OS on Mac 10.9.5.

  Here is what I tried:

  1. check if I need a firmware update for my DN850 STR (I have not).

  2. repair permissions on Mac played.

  3. disconnect and restart the cable modem, router, Macs and DN850 STR. I have them all at the same time, reboot in order the cable modem, router, DN850 STR, and Macs.

  I don't see how something that worked perfectly for 8 months can suddenly stop working. I can't help thinking that there is a simple solution here, and I'm going to go for not realizing it. However, for now, I'm stuck and any help would be greatly appreciated.

  It's official: I'm a fool. I went through all the steps above again and this time it worked! I suspect that restarting the network was the culprit.

• Text messages stopped working after update

  My i1 on Boost network stopped sending and probably get texts after the last nite update.

  Does anyone else have this problem? »

  I noticed that the small globe is not at the top.

  I tried Master Reset.

  Thanks for any help.

  I tried, because there was no globe. Boost that had me delete all messages and remove the battery. I tried texting myself by e-mail to ###@myboostmobile.com now that the world is back but that they do not download, I just get the download button and I sent it to plain text too.

  That seemed to do the trick.

• Recently updated to Yosemite and preview stopped working in Safari and Chrome. Any ideas?

  

  

  This update fixed:

• Hello, "set as Start Page" does not work for me. Anyone has any idea why?

  My "set as Start Page" does not work... anyone know what I can do?

  Thank you!!

  So, you tried to set the homepage under areas of site?

  What is now your start page?

• Time protection real HELP in MSE stopped working after running the utility in Windows Live OneCare cleanup tool?

  Protection in real time in MSE stopped working after running the utility in Windows Live OneCare cleanup tool? Error Code: 0x800705b4

  Hello Wally,

  Thanks for posting your query on the Microsoft Community.

  The question error codes and the description that you get suggests that you are facing problem when using MSE. This problem may occur if other security software, such as antivirus, antispyware and antimalware programs, are totally or partially installed on the computer.

  I suggest to change firewall security settings or disable temporary security on the system software and try using MSE and see if it makes a difference. How to temporarily disable security software, you can view the article mentioned below.

   

  Disable the antivirus 

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  For more details, please see the article mentioned below and see that it helps you to fix the problem.

  Real-time protection lights in Microsoft Security Essentials

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.

  New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.

  Axiomer wrote:

  New speaker of iFixit.

  It is a problem.

  iPhones are not serviceable by the user.

  You're on your own.  After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• stopped working after upgrade

  Firefox has stopped working after the upgrade to version 27. I reinstalled 26, it's been a while so I thought that the problem had been sorted out, so today tried to install the latest version. Same problem as 27, just does not work when you click it. I have Zonealarm later, and I have disabled all the internet security, control applications and anti virus. The same, followed instructions to remove firefox so reliable programs it tempt me the fact still. But there is no prompt . As a last resort, I uninstalled Zonealarm. Still does not work after a new installation.

  I am a website developer, and all my tools are on Firefox. Chrome never problems with the update, so what is happening here? Surely with the power of Mozilla, that sort of thing shouldn't. AM also on XP SP2 which deserves to be supported on the nocturnal compilations, I just read (cannot upgrade to SP3 for compatibility with other software).

  New version looks ace, so please help.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• Re: Satellite A80-135 - during recovery, that it stops working after 10 minutes

  After trying to reinstall Windows from original restore DVD my A80 stop working after 10 minutes of this.

  I tried again several times and the problem is the same. Cannot complete the installation, because is shut down every time after 10 minutes or more.

  Do you have any ideea why this phenomenon happens?
  Thank you!

  Hello

  You should check if the same issue occurs with another disc maybe you could try to reinstall the OS by using the original CD of Microsoft Windows.

  If installation still decomposes at the same point and time then this could be related to a recovery disk scratched.
  On the other hand the laptop could shuts down due to hardware problem.
  As mentioned by Luke, the internal HARD disk bad might work too.

  Overheating could be another reason why the laptop is off.
  Maybe don t cooling modules work as it should and puts it in internal temperature high power off the laptop.

  But these are that some suggestions so it would be really interesting to know if you can reinstall the OS using another disc

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Multifunction HP B110a stops working after update from Hp

  I have the all-in-one HP Photosmart B110a, who stops working after applying "HP updates notification". Impossible to print or access HP Solution Center (nothing works). Only solution is to use the installation CD to completely uninstall the HP software & then reinstall. I always prefer to bring software up-to-date, but never for this B110a.

  Member of the family with the same B110a also had this problem today after inadvertently update, so I fixed as mentioned above.

  A lot of your time. Could someone inform me why this happens & there at - it solution. BTW I stopped (as useful as an ashtray on a motorbike) updates

  Concerning

  Thank you Gemini02, not sure what you mean by "go through the HP software. I can find the IP address in the box at tools of the HP Solution Center/printer normally, but after applying the updates, I am unable to access the HP Center solution so I wouldn't be able to change the settings. In any case, I don't want to apply updates in the future.

  Kind regards

• All-in-One L7550: all-in-One printer L7550 stop working after a Win 10 update

  In the last two days my printer has stopped working after many updates to Win 10.  Functions in fact any printing has stopped (swirling points) to include my PDF SW.  I downloaded the last SW all-in-One and tried to install it.  The first thing that happened is that he tried to remove the previous SW.  Hooked to halfway through it.  Then, it was a nightmare.  I can't get the rest of the SW uninstalled nor can I install the latest SW.  I even tried to install the previous SW in Win 7 compatibility, but after extraction it just stops.  Tried to install the current version in Win 8 conpatibility, but it also wrong on.

  Any ideas wher can I start?

  Welcome to the Forums of HP, @CharlieCC,.

  I hope to help you with installation and uninstallation issues you are having with your Officejet L7550 on Windows 10. Before you get any software troubleshooting, try to make a copy of the front of the printer. If copies work fine, continue with the steps below to work on the issues of software!

  Step 1: perform a level 3 Uninstall to remove completely all the files to your system printer.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop: all-in-one printer, HP Officejet Pro L7550
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe (or .bat).
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.