Text with master pgs for a flow layout Directory-search suggestions

Similar Questions

• R12 post-installation checks fail with RW-50015 for HTTP, help, virtual directory, JSP Page and Login Page

  Hello

  I try to install EBS R12 for three weeks with the same result (after five fail post-installation verification).

  I tried to install Oracle Linux 5.8 32 bit and Oracle Linux 5.8 64-bit but end result is the same. When I installed Linux oral, I chose all the option packages. I also used the latest version of RapidWiz as suggested by some posts on the forum (and also in response to my other post by Hussein).

  Each installation attempt failed with the following text:

  (x) HTTP                                      (x) Help Page

  Virtual directory (x) (x), JSP

  Login page (x)

  It failed with "RW-50015: error".

  =========

  HTTP

  ====

  check the URL = http://prod.ebs1.com:8000

  RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==========

  Help page

  =========

  check the URL = http://prod.ebs1.com:8000/OA_HTML/help

  RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ========

  Virtual directory

  =================

  RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  JSP

  ===

  check the URL = http://prod.ebs1.com:8000/OA_HTML/jtfTestCookie.jsp

  RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  Login page

  ==========

  RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  I did find a lot of information to solve this problem.

  Help, please!

  Best regards

  Well, I must fix it in next (trying to start Apache (adapcctl.sh) casts a ' error while loading Shared Libraries: libdb.so.2' on RedHat Linux 5 (Doc ID 879522.1)).

  Once you run the commands in the MOS Doc, stop and start the services than those mentioned above and it should seem so

  Thank you

  Hussein

• Problems with ASP Master Page for examples of measurement Studio Web Form

  I loaded Measurement Studio Web form examples (ASP projects) in VS 2008. Running within VS proceeded without problems. Then I built and published on IIS 7 for ASP pages

  wwwroot / vb , for example.

  Opening with the Internet Explorer browser, the home page is OK: localhost / vb. However, all of the examples under come with the following error:

  The file ' / vb/Annotations/Examples.master' does not exist (being one of the subpages Annotations)

  I looked in several discussions on the Web and found no logical explanation why this is happening

  Finally, I understood NOR appearing Web controls do not on a remote browser.

  The cause is IE, and I am currently using version 7.

  With Google Chrome, for example, everything works OK. Other Web, including Telerik control providers, are complaining about visibility of IE 'spoil' controls.

  Change some property settings for a Web control can solve the problem with IE

• Do I need for each page in flow layout, I have create a css file

  Need me a file different css for every page of fluid page that I create?

  Thank you!

  Build a prototype page with all the elements of page layout that you are likely to need throughout your site.   Save your document from prototype. Then SaveAs index.html (your home page). Then SaveAs page2, repeat for other pages of the site.

  Nancy O.

• Can illustrator or photoshop text curve around a globe as with the intro for Universal Pictures?

  Can illustrator or photoshop text curve around a globe as with the intro for Universal Pictures? I have Adobe CS6 Extended. What I want to know is if all adobe products can not only 3D text, but curves it as text in the intro of Universal Pictures. I want it to look, it is rotating around a globe I did. I don't want anything touch or be attached to something. 3D text just curves. I see so many tutorials on the text following a circular trajectory, but nothing where the text is facing you and bending away from you. Sorry if it's confusing. I think I may need to look into a 3D for this program. If so, any recommendations?

  Somps, you can also watch blender for 3D projects. Search Blender (dot) org. A learning curve longer than Sketchup, but a very capable (and also free) program. I post a link, but the last time I did that a person accused me of spamming the forums.

  -OB

• AE CS5 rendering/export PS of the text with a transparent background for the web?

  I am sure that this question has been asked and answered a hundread times already, but I can't seem to find the answer. I tried Googling and looking for these forums, maybe I just bad search peramiters.

  I'm trying to create and animate the text via AE CS5 for a web site. Then, I want to use it in Photoshop CS5. I can't find this option. I know that in the past, you were supposed to make the text in the form of film of all kinds, but now I'm just lost and confused on what to do.

  If the answer is just too long to post here, could someone please post a link to a tutorial/response?

  I guess that the answer will be a little different from versions CS4 CS5.

  Thank you.

  Go to any format Quicktime or a sequence image that supports Alpha channels, and then import this file in PS as a video layer or use frames in the layer Import Wizard.

  Mylenium

• changing value of text with the cursor

  Hi you all

  I need a help from your side

  I have created a slider and change the size of the listview text with the cursor

  Here is my code

   Slider {
                         id: slider
                          fromValue: 8.0
                          toValue: 16.0
                          value: 8.0
                          layoutProperties: StackLayoutProperties {
                              spaceQuota: 0.1
                          }
                          preferredWidth: 200.0
                          maxWidth: 250.0
                          preferredHeight: 20.0
                          visible: true
                          enabled: false
                          horizontalAlignment: HorizontalAlignment.Center
                 onImmediateValueChanged: {
  
  // descriptionText is the id of label
            descriptionText.textStyle.fontSize = FontSize.PointValue
             descriptionText.textStyle.fontSizeValue = immediateValue
                          }
  
                      }
  
  /***********************************************************************//
  i am adding data to listview using remote source
  
    Container {
              id: listviewContainer
  
              layout: StackLayout {
  
              }
              ListView {
                  id: myListView1
                  dataModel: dataModel1
                  //{
                  //  source: "asset:///models/xmldata.xml"
                  //      }
  
                  // Use a ListItemComponent to determine which property in the
                  // data model is displayed for each list item
                  listItemComponents: [
                      ListItemComponent {
                          type: "item"
                          Container {
                              rightPadding: 20
                              leftPadding: 20
                              horizontalAlignment: HorizontalAlignment.Center
                              verticalAlignment: VerticalAlignment.Center
                              layout: StackLayout {
                                  orientation: LayoutOrientation.TopToBottom
  
                              }
  
                              Container {
                                  topPadding: 40
  
                                  horizontalAlignment: HorizontalAlignment.Fill
  
                                  layout: DockLayout {
  
                                  }
                                  // The Item content container
                                  Container {
  
                                      verticalAlignment: VerticalAlignment.Top
                                      horizontalAlignment: HorizontalAlignment.Right
                                      layout: StackLayout {
                                          orientation: LayoutOrientation.RightToLeft
  
                                      }
  
                                  }
  
                              }
  
                              // Description text label
                              Label {
                                  id: descriptionText
                               //
                             //     objectName: descriptionText
                                  //  leftMargin: 20
                                  horizontalAlignment: HorizontalAlignment.Right
                                  verticalAlignment: VerticalAlignment.Top
                                  text : ListItemData.des
                                  textStyle.color: Color.create("#868686")
                                  textStyle.textAlign: TextAlign.Justify
                                  multiline: true
                                  textFormat: TextFormat.Plain
                                  textStyle.fontSizeValue: 8.0
                              }
  
                      }
  
                  }
          ]
  
      }
  
      attachedObjects: [
          GroupDataModel {
              id: dataModel1
  
              // Sort the data in the data model by the "pubDate" field, in
              // descending order, without any automatic grouping
              sortingKeys: [ "date" ] //[ "pubDate" ]
              sortedAscending: false
              grouping: ItemGrouping.None
          },
          DataSource {
              id: dataSource1
              objectName: ""
              // Load the XML data from a remote data source, specifying that the
              // "item" data items should be loaded
              source:"http://10.121.10.139/simplehtmldom/getdescnews.php?newsid="+dataSource1.objectName
  
              query: "/news/property/"
              type: DataSourceType.Xml
  
              onDataLoaded: {
                  // After the data is loaded, clear any existing items in the data
                  // model and populate it with the new data
                  dataModel1.clear();
                  dataModel1.insert(data)
                  myIndicator12321.setRunning(false);
                  myIndicator12321.setVisible(false);
                  //      dataModel.insert(data)
  
              }
  
                  }
      ]
  }
  
  // in the end i am calling on creating complete
  
  onCreationCompleted: {
          // When the top-level Page is created, direct the data source to start
          // loading data
          dataSource1.load();
      }
  

  problem I am facing is, it does not find the descriptionText variable, which is the id of the label

  can someone help?

  OK, the problem is that listItemComponents attached to a control, such as ListView have their own context. ListItemComponent documentation refers to what I think. If you must do the following:

  1. do you have a property that is defined as an attribute of the ListView

  2 bind your fontSizeValue to listItemComponent tag to the ListView. Note, however, to do this, you need to get a reference to the ListView using your label ListItem.view is found in the container. Not obvious, I know.

  3. do you have your cursor to update the property you have defined for the ListView.

  Cursor---> p_font_size ListView property<---------->

  Like this:

  {To ListView
  ID: myListView1
  property real p_font_size: 10

   

  listItemComponents:]
  {ListItemComponent}
  type: 'point '.
  ID: sample

  {Of container
  ID: mainListViewContainer

  {Label
  ID: descriptionText

  ..........
  textStyle.fontSize: FontSize.PointValue
  textStyle.fontSizeValue: mainListViewContainer.ListItem.view.p_font_size

  }

  and elsewhere on your page

  Slider {}
  ID: slider

  fromValue: 8.0
  toValue: 16.0
  value: 8.0
  layoutProperties: {StackLayoutProperties}
  spaceQuota: 0.1
  }
  preferredWidth: 200.0
  maxWidth: 250,0
  preferredHeight: 20.0
  visible: true
  enabled: true
  horizontalAlignment: P

  onImmediateValueChanged: {}
  myListView1.p_font_size = immediateValue
  }
  }

  I test it and it works. Please make this response as the solution if it works for you too :-)

• Change the size of the text in a label for a text element single view.

  I was wondering how I would change the size of the text in a single field of view. I think I need to change the scope attributes of HTML table cells, but I'm not sure what to put. I am able to edit the text inside the element by changing the attributes of the element field Form HTML with the following text style = "verdana fonts: 24pt;

  Thank you

  Jay

  Jay Hartford wrote:

  I was wondering how I would change the size of the text in a single field of view. I think I need to change the scope attributes of HTML table cells, but I'm not sure what to put.

  What version of APEX, theme and layout grid type do you use? 4.2 with a theme that does not use based on tables of HTML layout (such as the topic (25), labels is not a property of the attributes of HTML table cells .

  You must specify your APEX version in all issues and UI/theme/templates for a page layout or the question of Visual formatting.

  I am able to edit the text inside the element by changing the attributes of the element field Form HTML with the following text style = "verdana fonts: 24pt;

  Create the following style sheet on the page property CSS Inline (4.2) or the property header HTML (previous versions), replace "P1_X" with the name of your article:

  label[for="P1_X"],
  #P1_X {
    font-family: verdana, sans-serif !important;
    font-size: 2em !important;
  }
  

  If we knew what theme you were using it would be possible to eliminate the! important statements by using a more specific selector for the label.

• How to make columns of text with adobe muse

  Hi, how to make columns of text with adobe muse (like InDesign)?

  As Brad has already indicated, the columns are a difficulty.

  Set a text box to separate visually in separate (with a nice gutter) columns does not seem so difficult, but the problem lies in how to manage the flow of text in regards to positions, simple lines ugly upstairs and down a column, deliberate column breaks, how to connect to the text of subsequent block etc. The developers of W3C and browser have not yet agreed on this issue. (Look for the clear green statutes in the table: http://caniuse.com/#search=columns)

  As a matter of fact, Adobe has proposed and developed an alternative for wounds and flawed of current columns, at the W3C long meetings: 'Régions' (which could also leave the text to "wrap" around a box or even an irregular shape). But their effort was in vain. ' Technically too much, too soon, to be treated by the mobile browser engines ", was the comment of Google . So the W3C put this contribution on the shelf.

• How can I disable guides flow layout grid in CC?

  CS6, it was simple: just go to view > Visual AIDS and uncheck the box "grid flow layout guides" in CC option isn't there. And I can't seem to find it. So, how can I disable flow layout guides grid in CC?

  As far as I KNOW, there is no option to disable you some FG Layout Guides in DW CC (for now).

  However, you can hide the guides with just 1 click. See screenshot below:

  

  This button activates / deactivates the FG desactivez_ display the hide FG guides that you see on the screen.

• Change the source file of the insert text with a script

  I'm looking for a way to replace existing-insert text in a document with the contents of another file (by reference), using scripts. I have a document c:\referer.fm, in which there is an insert text which the source file is: c:\A.fm

  I also have c:\B.fm, and now I want to change referer.fm so that is no longer the overlay of text contains the text of A.fm, but the B.fm.

  I tried this:

  var doc is app. ActiveDoc;

  var textinset is doc. FirstTiInDoc;

  var pathtosource is textinset. TiFile;

  pathtosource = "c:\B.fm";

  textinset. UpdateTextInset();

  But it does not work. I guess that the "pathtosource" parameter can be done this way. If someone knows a way to do it, I would greatly appreciate your help!

  David

  Hello David,.

  You do not manipulate the text overlay, but a copy of the file in the text box. Your "pathtosource" parameter is a local copy of the property that you read from the actual text insert.

  Try this code instead:

  var doc is app. ActiveDoc;

  var textinset is doc. FirstTiInDoc;

  textinset. TiFile "c:\\B.fm".

  Note that the backslash must be escaped with the backslash to make it work in a JavaScript string. To make your script Fail-Safe, test the name of file textinset before changing. You do not have the textinset that you expect to have, as might also be INSET text on master pages and reference. All inserts text are in a single linked list.

  Also, update the text tagging along after that changing the path may not always work, as compared to FM, last changed the file date text inset with the last time that the textinset has been updated. To force the FM to update the textinset, you must include the following line of code after changing the filename text inset:

  textinset. LastUpdate = 0;

  Then, you can call the UpdateTextInset() method and it will work.

  Good luck.

  Jang

• Considerations of Master Page for high resolution in B + W printing

  Hello
  Wonder if you guys can help me with a few questions more that I have.

  
  I have a book that will be printed in grayscale B + W, where the font of the text is 'Garamond' and contains images in grayscale 300 DPI throughout the book.  I'm looking to make sure that the PDF file provided to the printing press is enough so that it can be printed in high resolution text and pictures (with embedded text/speech bubbles) come out as clear as possible.

  (A) can you tell me what settings and where I need to do in my Master Page template file Indesign so that it contains the appropriate parameters for the high print quality?
  (I read here: http://www.tek-tips.com/viewthread.cfm?qid=1255684 the Basic for press quality pdf in Distiller resolution is 2400 dpi).
  -What should be my "Advanced flattening / transparency"?
  -What should be my 'fusion of transparent space' be?
  -Everything I need to put?

  (B) wrt my images, should I import them into my indesign document as the original TIFF files or alternativey files .psd of origin containing the different shape and text layers?
  Secondly, can I embed images or preserve a link to them instead?

  Some experience;
  -My images are saved as TIFF files, and in grayscale.
  -Most of my images contain bubbles created in Photoshop and then saved without layers as TIFF files.
  -The bubbles contain text with a font variant of 7point to 14 points in the Myriad Pro font size.
  -The size of the image is 8.7x8.7 or 14.7x14.7 and are at a resolution of 300 dpi.

  I really hope that you can help me here as Im totally new to InDesign/edition and I am now starting to worry that I have not taken into account these basic considerations.
  Best regards
  L

  If you want to add text in Photoshop and not expect to print sharp, you have two choices, in my opinon. Work in Bitmap mode at 1200 dpi or more (which does not work for gray levels), or work in grayscale (for this project) at a resolution of Watt is required to give you 300 DPI to scale output, let live text layers and save the levels of gray images Photshop PDF so that the text is not rasterized.

• Set up the numbering of the pages for the book layout

  I'm carrying the text of a book in InDesign and I can't understand how to set up the numbering of the pages, so that they are in the outside upper corners for all pages EXCEPT for pages with Chapter heads, where I'd like the page at the bottom of the page number.  Also, I would like each page to have a header (the title of the book) with the exception of these pages with the chapter headings, which should not have any header at the top.  Is there a way to set these up so that they automatically fall in place without my duty go through each page individually and in changing all those with the titles of the chapters manually?  Thank you in advance for any advice!

  You use the master page for this.  Go to him (it will have created a called A default template), put a text box where you want than the number and go Type > insert special character > markers > current page number.  Style it how you want.

  And then on your chapter pages heading either to replace the master and delete the page number, or more elegantly to create another master page for them and which apply to the relevant pages.

• Siri in him sending text with the value 'NULL '.

  When I say, "Siri, text my wife, 'X', ' Siri responds correctly,"here is your message to Jill: 'X'. "" "  "Ready to send it?"  I say 'Yes' and sends the message.  As soon as I get a text from my carrier saying the recipient of the message was invalid.  100% of the time, I see that Siri has sent a text with the value NULL.

  I tried to restart my phone.  I tried to remove and re-add my contacts.  Anyone else having this problem?  Someone knows how to solve?

  If it's by the carrier, you should contact them and see what they receive in return for their side. Ive had Siri send messages for me and I have never seen this one IOS.

• I can send text to a Droid for my IPhone 6 but not from my Mac or Ipad.

  I can send text to a Droid for my IPhone 6 but not from my Mac or Ipad.

  < re-titled by host >

  Looks like you need to set up the transfer on your iPhone text messages:

  1. You need to iOS 8 or later version on your device iOS and OS X Yosemite or later version on your Mac.
  2. Connect to the iMessage with the same Apple ID on your iPhone, your other iOS devicesand your Mac.
  3. On your iPhone, go to settings > Messages > Send and receive. Add a control to both your phone number and email address. Then go to settings > Messages > text Message Forwarding and activate the device or devices that you want to transfer the messages.
  4. Looking for a code on the Mac, iPad, or iPod touch that you enabled. Then enter this code to check on your iPhone.

  See use of continuity to connect your iPhone, iPod touch and Mac - Apple Support