TextFields iOS not updated when the XML already is updated

Similar Questions

• Satellite Pro L20: battery not charge when the power adapter is connected

  Hello

  all advice appreciated.

  I had a Satellite Pro L20 for about 18 months. Recently, battery does not charge when the power adapter is connected. The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile. However the ACPI often said that AC is "offline."

  There are two recent occurrences that coincide with this problem, I try to eliminate:

  1. my friends rat chewed by the feeder for pets! Power is Mobile OK insofar as he fled sector - the rat seems to have simply chewed by the outer cover (I see some threads, but I think that is just a shield, although I'm not an electrician).

  2. I put the laptop in hibernation for the first time. That seemed to mess up the system a bit, which was what initially drew my attention to the problem. This question is a bit complicated because I'm under Linux (Xubuntu).

  I updated the drivers etc from windows when I bought the laptop. Never had any problems until now and have been running linux for centuries. Also, I have mainly the laptop the power supply turned off, but do not remove the battery (is that really a problem these days?)

  I obviously need to replace the adapter, but is - it is likely (and how I can check) that the battery was borked until?

  see you soon
  Chris

  First, please check if the other are lit.
  If the AC led and power led are on the adapter sector is ok and it provides the power to the laptop.

  > The battery light starts yellow (which means more liberated, I think?), then will both green, the machine sat for awhile
  If the battery LED is yellow, this means that the battery is not fully charged and if the Green led changes then recharging is caught and the battery has been recharged.

  So I really don t see any problems with the charge process.

  Maybe the battery is old and so you cannot use it for an extended in such a case only the replacement of the battery could help.

• Why are the table of contents will not appear when the project opened on the intranet?

  One of our projects RoboHelp 9 not open when the table of contents is open on the left.  It doesn't have a link that says 'Show', but the favorite opening would have the table of contents already developed.  All other projects pave the way.

  I have "Show Navigation pane link in topics" box on the settings WebHelp Navigation page. I adapted all webhelp settings to another project that opens correctly.

  What else can we do?

  Deanna

  Hmmm, the dialog box, the page that should open the WebHelp is actually named 'startpage.htm '. It would seem that it is the HTML page, you must link to the.

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• SK2061: The wireless keyboard will not connect when the PC is turned on.

  My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it).  Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.

  The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.

  Hello @JimCar82,

  I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!

  Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• DeskJet 2540 does not connect when the WiFi is enabled

  When online the printer will print not wireless, when the line of the printer print wireless help... aaaaahhhhhh third one is now...

  Hi paulthechef1,

  Using a connection myfi could absolutely cause these issues.  MyFi isn't a supported type of connection, and its functionality with printers is not a guaranteed connection.  I recommend you to connect to a router or a USB cable.

  Please let me know if you have any other questions.  Thanks for posting on the HP Forums.

• Dell Precision M6500: Reference DELL M6 500 computer laptop does not charge when the work and no start-up when which

  Laptop DELL M6 500, do not load when the work and no start-up when which

  just bettry lights blink when phone on Exchange when I plug laptop tap, on bettry

• (Redirected) Dell audio drivers will not load when the system is turned on for the first time after his stop.

  Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.

  Hi akilesh.sharma18,

  Please repost this in the Audio forum from the laptop to help.

  http://en.community.Dell.com/support-forums/laptop/f/3517

• Database alert is not triggered when the Oracle database monitor by mistake.

  Hello

  Database alert is not triggered when the monitor of the Oracle database by mistake. If we test the alert manually alert works correctly. Could someone let me know the solution for this.

  This isn't a question of PC or operating system. You should post your questions in the forums of Oracle database.

• Scheduler - not triggered when the task "run if the user loged on or not."

  I m, creating a task that is mapped to a file is to run,

  I have his work automatically and manually when the option (button) "run only when the user is logged on" is selected.

  but the automatic/manual RACE does not work when the option (radio button) "Run if user logged on or not" is selected.

  Please help us to solve the issue.

  "Run If the user of connect or not" only works if the task does not call a user interface.  I have found this workaround to How to run. BAT files invisibly - Ramesh Srinivasan and it works successfully "Run if user logged in or not ' in Task Scheduler batch files now.

• FDM 11.1.2.2 fdm adapter not shown when the location is created

  Hello

  FDM 11.1.2.2 fdm adapter is not displayed when the application is created in places

  I'm so when I tried to import data to test data access error

  and in the error log saying his request does not exist

  Please help me solve this problem

  Couple of solution to try

  1. recreate the import format and then reload again as sometimes get corrupted as well.

  2. place an excerpt from the sample of data to load into the Inbox and see if it load successfully.

  3. the account that you use to connect to SQL must have read access as when Bulk Insert is used, FDM creates two temporary files, which is the .tmp file referenced in your error message. The .tmp file is an insert in bulk. In order to run an insert action block in SQL, FDM uses the network account that runs the MSSQL Server service. Account goes off in the Inbox of FDM, reads the file and them slap it in the database.

  Thank you

  ~ KKT ~.

• Conditional liquid do not print when the conditions are met.

  I build a simple menu in British Colombia and for the purpose of this project, I'm going to be exposing this menu without using Module of menu in British Colombia. I use the following code:

  {% If globals.user.isLoggedIn contains 'true' %}}

  < id = "my-account-link" li > < a href = ' / my account "> < i class ="fa fa-diamond"> < / i > < span class ="-animate "> my account </span > < /a > < /li >

  < id li = "settings-link" > < a href = "/ my account-#settings" > < class i 'fa fa-sliders' = > < / i > < span class = "-animate" > my settings </span > < /a > < /li > ""

  < id = 'link-support' li > < a href = "/ my account/help" > < i class = "fa-fa-question-circle" > < / i > < span class = "-animate" > support </span > < /a > < /li >

  < id li = "logout link" > < a href = "/ LogOutProcess.aspx" > < class i 'fa-fa-sign-out' = > < / i > < span class = "-animate ' > Log Out < / span > < /a > < /li >" "

  {% other %}

  < id li = "connection-link" > < a href = "/ login" > < i class = "fa fa-sign-in" > < / i > < span class = "-animate" > Login / / Sign Up </span > < /a > < /li >

  {% endif %}

  I have used before with other snippets of code and this liquid condition print very well. For some reason, when I test the newspaper, the State still shows the wrong code even when I look through the JSON printed in the console object and the object user loggedin contains the value Boolean 'true '. Sort of at a loss as to why it is not printing when the user connects. Really want to use liquid on it and do not have to revert to the version JS of the hiding items.

  Thanks in advance to all! Best wishes!

  Well, I feel stupid, I was following the copy and the tutorials BC and pasted. Realized that I had to use operators such as "is" appropriate and «!» = ». I fixed it now

• Wake On Lan doesn't work not to when the PC is shut down

  Hello

  I plug just the HP all-in - One 200-5110 win7 64-bit and I'm pretty happy with it, everything works fine and I finished the installation but I can't do the work of Wake On Lan (wol) when you clean shutdown of the pc.

  The Office uses the same cable, same switch port with my former 6 year old computer that had no problem alarm since the closure.

  The BIOS I see no parameters, the network card has the latest drivers on the HP site, and I think I tried all possible combinations of settings in network properties. The only way that Office wakes up correctly is to Hibernate or sleep state.

  Here are some screenshots of my settings:

  http://img713.imageshack.us/img713/1424/clipboard1k.jpg

  http://img14.imageshack.us/img14/8003/clipboard2tp.jpg
  http://img406.imageshack.us/img406/1/clipboard3.jpg
  http://img31.imageshack.us/img31/4227/clipboard4k.jpg
  http://img521.imageshack.us/img521/124/clipboard5.jpg

  Anyone have an idea on how to solve this problem? Did I miss something or an option?

  Thank you in advance.

  Kind regards
  Vassilis

  For WOL to work when the computer is OFF, this feature must be enabled in the BIOS > Power. If there is no option, this feature does not work when the computer is turned OFF.

• Change the listener not notified when the tree item is deselected

  I attach a listener to the selected index of the view tree selection model property to detect when a user selects or deselects on or other nodes in a tree, but it seems that the listener is not notified when the user deselects a node. So, if a user selects both nodes, and then while holding the CTRL + key deselects one of selected nodes the tree view control deselects the node, but the change listener is not notified. This is a bug or I do something wrong?
  
  I use the GA of JavaFX 2.1 on Windows 7 version.
  
  Thank you.
  Stefan
  
  Import javafx.application.Application;
  Import javafx.beans.value.ChangeListener;
  Import javafx.beans.value.ObservableValue;
  Import javafx.scene.Node;
  Import javafx.scene.Scene;
  Import javafx.scene.control.SelectionMode;
  Import javafx.scene.control.TreeItem;
  Import javafx.scene.control.TreeView;
  Import javafx.scene.image.Image;
  Import javafx.scene.image.ImageView;
  Import javafx.scene.layout.StackPane;
  Import javafx.stage.Stage;
  
  SerializableAttribute public class TreeViewSample extends Application {}
  
  rootIcon private final node = new ImageView)
  New Image (getClass () .getResourceAsStream ("Folder.gif"))
  );
  
  Public Shared Sub main (String [] args) {}
  Launch (args);
  }
  
  @Override
  public void start (point primaryStage)
  {
  primaryStage.setTitle ("Tree View sample");
  
  TreeItem < String > rootItem = new TreeItem < String > ("Inbox", rootIcon);
  rootItem.setExpanded (true);
  
  for (int i = 1; i < 6; i ++)
  {
  TreeItem < String > element = new TreeItem < String > ('Message' + i);
  rootItem.getChildren () .add (item);
  }
  
  TreeView < String > tree = new TreeView < String > (rootItem);
  tree.getSelectionModel () .setSelectionMode (SelectionMode.MULTIPLE);
  tree.getSelectionModel () .selectedIndexProperty () .addListener (new ChangeListener < number >)
  {
  @Override
  public void changed (ObservableValue <? extends number > ov, number oldIndex, number newIndex)
  {
  System.out.println ("selection changed.");
  }
  });
  
  Root StackPane = new StackPane();
  root.getChildren () .add (tree);
  primaryStage.setScene (new scene (root, 300, 250));
  primaryStage.show ();
  }
  }

  The value of the selected index does not change in these cases, because it reflects the last selected index (useful for single selection). It is not weird is possible to get a selected index which is not actually enabled (you can report a bug for this I think).

  However, if you want to keep track of the complete selection, try adding a ListChangeListener to the selectedIndices of the selection model. This one is triggered a change every time.

• How can I get audio to not start when the button is clicked?

  I am new to adding audio to slides, buttons, click boxes.  Import the recorded voice on the overall slide of files sounds easy enough.  However, there are several buttons that display a legend I want audio to not start when the button is clicked.  I added audio just for this button, but it starts when the slide begins.

  How can I get audio to not start when the button is clicked?

  Hello

  Audio playback when the assigned object with the audio appears. That's why hear you when the button appears.

  Try to assign audio instead to the object that is displayed when you click the button. Perhaps the legend.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks