TextInput bug when the desktop deployment

Similar Questions

• Do WLST exception like ' target the exception that is thrown when the application deployment: no such file or directory found in the location of the specified application: "all administration server application deployment

  Hi all

  I'm trying to deploy an application to the administrator of the server using WLST and I had followed steps below.

  (1) I ran setDomainEnv.cmd

  It was performed without error.

  (2) connect to the Server Admin

  Connect ('USERNAME', 'PASSWORD', ' t3: / / localhost:7001', adminServerName = "AdminServer")

  (3) to deploy the application

  deploy ('benefits', 'C:\Users\suhas\Desktop\benefits.war' target = 'AdminServer')

  Traceback (innermost last):

  Folder "system <>", line 1, in?

  File '< iostream >", line 246, to deploy

  File "< iostream >", line of 1848, in raiseWLSTException

  WLSTException: Error occurred when executing deploy: target the exception that is thrown when the application deployment: no such file or directory found in the location of the specified application: C:\Users\suhas\Desktoenefits.war : no such file or directory found in the location of the specified application: C:\Users\suhas\Desktoenefits.war

  DumpStack() to view the full stacktrace

  WLS: serverConfig/test_domain / >

  I'm the exception above, I gave the exact war file path while the deploy command of race but represented except the application path refers to a path that does not exist.

  I, e. instead of display C:\Users\suhas\Desktop\benefits.war C:\Users\suhas\Desktoenefits.war appear

  Please help me solve this problem.

  Thank you and best regards,

  Suhas

  You can use the script here

  Automation of the deployment of the application on Oracle Weblogic Server

  Use a backslash instead of the forward slash... and type it instead of copy paste...

• When the battery works fine. When the power adapter is pluged into the computer will be boot & when the desktop appears on the screen go blankin seconds. computer is still on, but nothing on the screen.

  I have HP Pavilion ZV5325 with windows XP. When I start the computer with the battery power only everything seems to be okay. When I plug the charger (HP part #316688-001 power AC) start of the Welcome screen comes on, but when the desktop appears that the screen turns off after a few seconds. The computer is still following this timje, but with a white screen.

  Hello

  ·        Happens before? Since when are you facing this problem?

  I suggest to reset the power of the system options and check whether the problem is resolved. Follow the steps mentioned below.

  a. click on Start menu and click Run.

  b. type cmd in the run box, and then press ENTER.

  c. type the command which is given below.

  powercfg /RestoreDefaultPolicies

  I suggest you to update the BIOS and see if the problem is resolved.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to backup data, when the desktop is wired and mobile wireless ethernet?

  ISP is at & t Uverse packaged for TV, phone and Internet.

  The laptop shows the home network when the desktop is turned off.

  The office only displays the router when the laptop is turned off.

  It defeats the purpose of a backup when the office is off,

  because that's when you need the backup at first.

  Any way around this dilemma?

  My answer to 1. Data personal such as My Documents, photos and favorite.

  2 try to back up data on the other computer?  This question gives me a clue, that's why a computer displays the network folder while the other computer if off, but not vice versa.

  I think the best solution, as I said elsewhere, is back up to an external hard drive.

  3. I don't have an online connection.

  I have now two methods that work.  So, thank you very much for your help, Stephanie Podder.

• remove the entry from conformation dialog box when the desktop icon to open

  delete come conformation dialog when the desktop icon to open. A number of dialog from one on the other. Cannot delete this until the shutdown the computer.

  If you want to remove several things, hold down the CTRL key and click on what you want to delete, and then right-click on one of them and click on delete.  You will get a confirmation dialog box.

  Good luck.

• OVFtool bug when the specification datastore

  It seems that ovftool 3.0.1 has a problem while specifying the target data store when you import an OVF when the VI is a vCenter Server 5.0 with the ESX host 5.0 Update 1 with a large number of data warehouses.  The cluster where this occurs has 148 stores of data.

  Some data warehouses no longer works.  It is a new problem since ovftool 2.0.1 worked well while this group was to ESX 4.0 Update 3.

  An example statement that is causing the problem (with all the names have been replaced by names of 'test'):

  "C:\Program VMware OVF Tool\ovftool.exe" - acceptAllEulas - name = 'TestVM'-'TestDatastore' = datastore - network = TestNetwork - vmFolder = "TestFolder" http://192.168.0.1/public/OVFs/TestVM.ovf " vi://"username:password"@vcenter.test.com/"Data Center "/host/" HA and DRS '/Resources/' Resource Pool of Test '

  Which causes this error (with the data store names replaced by TestDatastoreX), even if the data store is clearly.  It worked well before vSphere vCenter 5.0 and 5.0.  Any ideas?
  Note that all the "completions" listed below work very well!  Those that I tried are "not" in the possible completions don't work ".
  Error: Invalid target data store specified (TestDatastore): possible completions:
  TestDatastore1
  TestDatastore2
  TestDatastore3
  TestDatastore4
  TestDatastore5
  TestDatastore6
  TestDatastore7
  TestDatastore8
  TestDatastore9
  TestDatastore10
  TestDatastore11
  TestDatastore12
  TestDatastore13
  TestDatastore14
  TestDatastore15
  TestDatastore16
  TestDatastore17
  TestDatastore18
  TestDatastore19
  TestDatastore20
  TestDatastore21
  TestDatastore22
  TestDatastore23
  TestDatastore24
  TestDatastore25
  TestDatastore26
  TestDatastore27
  TestDatastore28
  TestDatastore29
  TestDatastore30
  TestDatastore31
  TestDatastore32
  TestDatastore33
  TestDatastore34
  TestDatastore35
  Completed with errors

  Hi Erick

  We discovered a problem with folders: when a data store is in a folder ovftool will not see. If this is the case in your configuration, we are aware and will fix it.

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• oracle.mds.core.MetadataNotFoundException when the EAR deployment in local WLS

  Hi all
  
  I tried searching the forum and read this: How to get rid of MDS , I checked the path in the field: C:\JDev11g_Home\system11.1.1.4.37.59.23\DefaultDomain, no space in the path. I searched this file, he complained of "adf - config.xml", could not find this file in my application at all. (My application is migrated from 10g to 11g using the Trinity.) I use JDEV 11.1.14.0 and WLS 10.
  
  Also, I tried these 2 scenarios during the creation of the EAR file: include / exclude these 2 jars: mdsrt.jar & oramds.jar, (although I don't think this is the cause because he did not complain ClassNotFoundException.) same mistake of deployment.
  
  Here's the output console during deployment of the EAR:
  
  < MDSBackingStore > < obtainMetadataObject > Exception when obtaining mutable object
  oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata not found for the metadata object '/META-INF/adf-config.xml '.
  at oracle.mds.core.MetadataObject.getBaseMO(MetadataObject.java:1163)
  at oracle.mds.core.MDSSession.getBaseMO(MDSSession.java:2837)
  at oracle.mds.core.MDSSession.getMetadataObject(MDSSession.java:1204)
  at oracle.adf.share.jndi.MDSBackingStore.getMetadataObject(MDSBackingStore.java:389)
  at oracle.adf.share.jndi.MDSBackingStore.obtainMetadataObject(MDSBackingStore.java:510)
  at oracle.adf.share.jndi.MDSBackingStore.getMOBean(MDSBackingStore.java:566)
  at oracle.adf.mbean.share.config.RuntimeMXBeanImpl.init(RuntimeMXBeanImpl.java:169)
  to oracle.adf.mbean.share.config.RuntimeMXBeanImpl. < init > (RuntimeMXBeanImpl.java:159)
  to oracle.adf.mbean.share.config.RuntimeMXBeanImpl. < init > (RuntimeMXBeanImpl.java:151)
  at oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack.contextInitialized(ADFConfigLifeCycleCallBack.java:127)
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:636)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
  at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
  at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
  in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)
  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:528)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  < ADFConfigLifeCycleCallBack > < contextInitialized > cannot create the mbean config.
  
  Help, please!
  
  Thank you.
  Shawn

  the adf file has the ear file... If you deploy by using the jdeveloper, he will understand the adf file... If you do with the ant script control if the ant script is written to include this file also in the ear file.

• Recently installed virus - repair - uninstalled MS2003 - MS2007 - 6500 PRINTER Multi no longer works when the desktop is disabled. It seems to be at the point of death/pause? What help can offer you?

  I uninstalled and reinstalled several times to resolve the problem only there never get fixed. Please advise any assistance that you may have.

  Alice

  Hello Alice,.

  We will perform the uninstallation/reinstallation in a different way:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  In addition, here are some references on printing:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• "Device Failed to Connect" sound notification with no popup at startup once the desktop appears

  When the desktop appears, I sound "dududu" with no popup. I had to look it up in the audio file and the explanation next to it said noise "device failed to connect.

  I currently have no device attached except speakers and keyboard and mouse. I bought a HP Phopsmart printer and installed but it does not work well, so I uninstalled it. I left the USB cable connected to the computer after disconnecting the printer after reboot several times, and then disconnected. At this time the sound notification has begun.

  I don't know if the printer had nothing to do with it. What should I do to fix this? Help, please. Thank you.

  Hello

  Have you tried to remove your printer as described in the article?

  If no, then try and see if the problem still occurs.

  Also check if the answer given by SpewHole (published on Thursday, April 1, 2010 04:51) helps you in the thread/link below.

  http://social.answers.Microsoft.com/forums/en/vistahardware/thread/c5737e52-b7a7-4c68-B27B-89adb8343716

  Check back for red or yellow bangs in Device Manager and post status.

  Steps to open Device Manager:

  1. click the Start button, type devmgmt.msc and press ENTER.

  You can also check if the problem persists in safe mode and post back with the State, so that we can help you better.

  To use the safe mode option, follow these steps:

  1. reboot your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  2. use the arrows to choose appears in the Advanced Options in Windows Safe Mode menu and press ENTER.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Kind regards

  Umesh P - Microsoft Support

• ManagedDataAccess bug when using mixed comments (reopened)

  Hello

  There is a bug when the sql text uses two types of comment (/ * / and -) together and also there is a comment at the beginning of sql. The unmanaged client with same sql works very well.

  Simple code to reproduce the bug:

  using (OracleConnection connection = new OracleConnection (connectionString))

  {

  connection. Open();

  string sqlCommandtext = @"" / * Hello * / select * from the double ";"      This works.

  string sqlCommandtext = @"" / * Hello * / select * from double / * Hello * / ";"      /this. work
  

  string sqlCommandtext = @"" select * from double - Hello '; "                     /this. work
  

  String sqlCommandtext = @"" / * Hello * / select * from the double - Hello ";"           //This doesn't work

  string sqlCommandtext = @"/ * Hello * / select * of the double / *-Hello * / "; "     //This doesn't work either.

  using (OracleCommand command = connection. CreateCommand())

  {

  cmd.CommandText = sqlCommandtext;

  using (IDataReader reader is cmd. ExecuteReader())

  {

  while (player. Read / / < < < without exception, the drive appears to be empty. Use of dataadapter issues the same behavior (buggy).

  {

  Console.WriteLine (reader. GetString (0));

  }

  }

  }

  }

  Can you confirm this bug?

  Thank you.

  This is a known bug (Bug 21811441). A fix is available in 12.1.0.2 Patch 11 and thereafter.

• (Help!) Subscription free magazine app - rejected twice for the same bug - specifically, the activity in

  Hello

  Here is the response of rejection of the application.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------

  2.2

  We found that your application exposes one or more bugs, when the review: iPad iOS 7.1, running on Wi - Fi and cellular networks, which is not in accordance with the App Store Review Guidelines.

  Specifically, the activity indicator turns indefinitely subscription. Please see the attached screenshot for details.

  For questions at the level of the discrete code, you can check with Assistance technique Apple Developer. When the DTS engineer follows upward with you, please be prepared to provide:

  -all the details of your rejection problem (s)
  -screenshots
  -steps to reproduce the problem (s)
  - symbolicated crash logs - if your problem results in a crash log

  If you have difficulties to reproduce a problem report, please try to test the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/ > Technical Q & A QA1764: how to reproduce a bug or crash who see only App Review or users.

  • Screenshot_0.PNG

  ---------------------------------------------------------------------------------------------------------------------------------------------------------

  I had the same rejection of the first time. After watching Adobe online, thought it was a billing issue, so I managed to get this rectifed. I hadn't used a shared secret (as he had not shown because I thought, the billing was not setup correctly). After that we have fixed the billing, I had access to the shared secret that I used.

  Any ideas what this could be?

  The app is a magazine app that's free subscription. It is the inapp purchase. No folio in app purchases don't, because they are free. Sent with the first version on the magazine published, although Apple coulnt got her in the form of time subscription.

  Help! Because it is the second rejection, it's two weeks and I'm getting closer an event that I have the app live for.

  Thanks for any help,

  Matt

  Hello

  First of all, thanks a lot for all the help of Bob, Neil and Jr. Your responses were quick and very useful.

  Gold support were also very good. Thanks to the DOE for this one.

  Solution: because the product ID are marked as such in a few different places, and I was trying to make sure that his marriage with them upward, I gave the folio and the same subscription ID. Maybe, he could help mark the folio and subscription IDS differently? (I so myself and I remembered, as soon as it has been pointed out. Well! Can't see the forest for the trees sometimes).

  _01 added to the Folio Product ID and try again. Wish me luck!

  I found very good support Adobe's Gold.

  Kind regards

  Matt

• Bug: Trash does not display 'empty' icon when the Recycle Bin is emptied.

  Bug: Trash does not display 'empty' icon when the Recycle Bin is emptied. This only happens when you use customized for the trash icons. The Recycle Bin appears correctly when office is updated.

  It would be nice if someone could answer this question, as it is 8 months old.

  Click Start, type regedit.exe, and then press ENTER.

  Reach:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\CLSID\ {645FF040-5081-101B-9F08-00AA002F954E}

  Export the branch above into a REG file.

  Exit Regedit.exe

  Open the REG file with Notepad, copy the content and include it with your answer.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• How to get a flash drive will appear on the desktop when it is attached

  I use a Macbook Pro OS 10.7.5 and when I join my flash drive, it is not

  appear on the desktop.

  I can find the files with the Finder, but I would like to have the device appears on the desktop.

  What should I do for having done that?

  Thank you.

  Look at the preferences of finders.

• eject the camera when no disk on the desktop icon

  How to eject my camera after that import photos into iPhoto, when there is no disc on the desktop icon and not eject from the menu file finder?

  Ed,

  Read the excellent advice provided by leonie in how "eject you" a camera or such a device of the photos app after import?