Texts in doubles with my Motospeak

Similar Questions

• Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  I think it's about the size, just differently than before. See the discussion in:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=691157

• text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.

  Text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.  This has happened recently.  My two girls have used their respective ipods and texting, without their messages of duplication for each of the other ipods for more than a year.  Somehow recently, both addresses seem to be synced with them or something, so that both see each and other messages.  I've recently updated two ipods, iTunes on my computer--not the cloud and added music for two ipods, but has not changed anything by email email settings or message I know.  Help, please!

  Welcome to the Apple community.

  I can't fully follow how you have everything set up, but a glance at the settings > messages > send & receive

• New Z3 double with 6 monts warranty

  Hello

  Distributor sold me new (?) Xperia Z3 double with only 6 months manufacturer warranty. Because of the shorter warranty I bought cheaper. Now I wonder if perhaps more short warranty to connect somehow with service history or renovated status. Is it technically correct sold the phone like new with less guaranteed 24months then? If someone could explain practices Sony warranty in cases like this I'll be gratefull.

  Concerning

  @Pio2

  Did you buy the phone directly from Sony? If you did, contact them directly, do not forget that the warranty varies by country

• Looking for a pdf document to find parts of text in shape with a specific font

  I have a document that I have out in pdf format.

  Between the first and the last version of this document, I made some changes, one of those in lieu of one font by another.

  Alas, in the final PDF, under 'document properties', 'tab fonts', I still see the first draft policy (when it should not exist anymore in my paper). This may mean that there is a bit of text I've not successfully updated.

  so I want to identify these pieces of texts that are still formatted using the first draft policy. I know that this must be done in my main application, but for some reason any (good), I prefer to do this search in the output pdf itself.

  So, how could I do this search for Acrobat (I use Acrobat Pro XI)?

  Thank you
  

  Possible Yes... a bit klunky. Yes, too.

  • Open document properties > fonts dialog and note the PostScript name of the font that you are looking for
  • Prefight opened since the printing Panel
  • Select single checks (symbol of glasses)
  • Select Options > create new preflight check
  • Call it 'find my policy', then in the box to "find" the top right type of page "basic policies". The task will appear in the next window, click Add.
  • Under ' begins with ', enter your PostScript name, and then save the control
  • Back on the dialog box controls upstream the check and click Analyze.
  • Double-click on the start line with a red X and in the document itself, you will see each instance of red font specified by crop marks.

• Text that develop with the expandable text field

  I created a form using Livecycle Designer. I have 2 questions;

  1. how to create repeating fields.

  2 it is the text before and after the extensible text field, how the texts after the text growable field 'navigate' the text growable field. (when the user starts to fill the field expand the text after the demon of the text is expected to grow to the right as the text field.)

  3. how to create the text field in double capture / will reflect whatever the user type in a field in another text field without filling actually twice.

  See attached file

  Will be grateful if anyone can help! Thank you thank you =)

  For Q1 and 2 there is something called a field floating allow you to merge the data in a text block and reflow to remove all spaces in the block. This is available only when the data are merged on the form. This isn't an interactive field. Once the data are merged, it is transformed into a block of static text.

  For Q3, this is a case to assign a value to another.

  FieldNameofTargetField.rawValue = OriginalFieldName.rawValue;

  This code must be run on an event related to the original material. In general the exit event is used for this purpose. So when the user leaves the field, the target field will be updated with what was typed in the original field.

  Paul

• Scanning text is reversed with pixma mp530

  Hi all

  I have older software MP Navigator v 2.2.5 and EL CAP LAST version

  use to work fine - but text now scans are coming from reversed - Black w white text

  new versions of MP Navigator do not seem to like they're for this model of canon

  Q: How can I remedy this?

  I do not see a more recent software available for EL CAP

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/printers/Suppo rt - ink-printer/mp-series/pixma-mp530 inkjet

  which software are you scanning with?

  If it's a twain complaint scanner you can scan directly from Preview in the import from a scanner under file.

• backup iPhone doubled with iOS9!

  I just finished a backup of the iPhone, the first since the upgrade to iOS9. After finishing, I noticed the available disk space on my MBP drop between t0 and about 50 GB 20 GB and when I looked the backups under mobile application support in my home library, I noticed that the backup of the iPhone has nearly doubled in size from 32 GB to 57 GB. My phone is 128 GB 6 more than about 30 GB in the film and 8 GB for free. The only thing really to have changed between two backups is the content of the camera (I deleted the photos and videos after the transfer of external drives and took new who are now in the film, but the size is roughly the same if anything a little less). I can only imagine that the iOS9 new backups are especially neglected before files or there is a bug in the software and large empty files are created in the backup. It might be also something to with the new way that in iOS9 apps are now separated rather specific for each device versions that shared between iPad and iPhone, for example, then perhaps for this reason, there are more specific iPhone data to back up than before.

  I searched the web for this and found a lot of people with a similar issue when the backup on iCloud (they have invaded the storage available iCloud), but I have not found one other report of what's happening with local backups.

  The question is quite a big problem for me because I have 2 iPhones (work) and iPad (iOS8 backups) currently stored on my MBP so if these backups will also have doubled they does not fit on my local drive and I really want to start to move the backup files on external drives unless absolutely necessary.

  If anyone has experienced similar or has a clue what is happening here, I would be grateful hearing from you.

  See you soon

  Joey

  Anyone have any ideas?

• How can I text a person with a blackberry? I need to change something in the settings

  I'm not a blackberry phone with my iphone6s... I need to change something in the settings of text

  Hello

  Not if its an apple device, it's an imessage

  If she a Android phone there a sms message

  Swork cheers automatically

  Brian

• How to configure the properties of text in double to float in qml

  Hey there, I print a temperature levels in my application and print very well but its shows like 32.38548758394c/89.89845098095F tempreture, then how to set the properties of the text so that it should be printed as 32.3/89.8F how to set its property from double to float
  my code is

   Label {
  
          text: "Temperature ="+_battery.temperature+("°C/")+(_battery.temperature*1.8 + (32)+("°F")
          multiline: true
          translationX: 50.0
          translationY: 130
  
                      }
                      textStyle {
              color: Color.White
              fontSize: FontSize.Large
          }
  

  Please suggest

  Don't forget that you can use Javascript inline in QML.

  Just use

  toFixed(1)
  

   text: "Temperature ="+_battery.temperature.toFixed(1)+("°C/")+((_battery.temperature*1.8 + (32)).toFixed(1)+("°F")
  

• Text in black with white border

  Hello

  I draw a text on the map with drawText and the text color is black. I want the text has a white border for visibility.

  Something like this:

  

  Is there a solution for this problem?

  THX,

  Andy

  Try this:

  paint the text to the x - y, y-1 in white

  paint the text to x + 1, y + 1 white

  then paint the text in black to x, y

  This should give you a reasonable facsimile of what you are looking for.

• BlackBerry Z10 text message problem with BlackBerry Z10 - insulation, inadmissible, not shipping

  Having a few texts from major problems.  Sometimes when I touch on a contact, I send SMS it takes about 20-30 seconds for the key board and the cursor to arrive.  When you type, it takes 20-30 seconds for the next typing.  When I finally have the ready message, it will take 30 to 60 seconds to send... or I get an alert "failed to save the message.  I rebooted and tried to take the battery off-don't... no luck.

  This problem occurred intermittently for the last few months, but sometimes for an hour or two.  Currently, it has been almost 24 hours.  I'm getting very, very tired of these problems with this phone.  I've been a BB user for 7 years and will visit with someone else I'm frustrated that.

  However, my BBM works very well.

  Hello

  So, she was always like that? Or is this new behavior? If new, what happened just before the behavior started? An update of a certain type? A new application? Physically removed or damaged? Something else?

  Also, sometimes the OS itself just is damaged and a clean OS refill can be useful for troubleshooting problems.

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...
  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Be aware of the risks of 10.3.2 however... There are two things to worry about. First of all, be 100% sure that you know your BBID identifiers... If you do not, you may make your useless device to anyone, including yourself. Second, once you move to 10.3.2, you cannot fall back to 10.3.1 or earlier, by any medium (for example, even the unofficial AutoLoaders can not overcome this restriction anti-secours).

  Good luck!

• BlackBerry Z10 need to add a Signature to my text to comply with Bill C-28

  Hi all.  I'm new to the Forum and would like to thank everyone in advance for any help that you can answer with.  I searched some topics before posting without much success.

  Course coming July 1, 2014 Bill C-28 will start which requires all companies to include a link 'stop' of some kinds of all electronic devices.  I need to know how to add a signature with a 'stop' option to my text messages.  Yet once this isn't for the emails that I already put in place for that.  This is for TEXT Messaging.

  So far, everywhere I looked States that Blackberry does not have this option.  Well, if they do not, they understand something quickly.  Apple and Andriods have.

  Please if you have any suggestions that can help, it would be greatly appreciated.

  Again, I use a Blackberry Z10

  Thank you!

  You know that Canada is not the only country in the world right.

  Anyway most of the spammers wouldn't using a BB Phone for spam with they would use a server.

  So with these two points, put aside, I looked coming to 10.3 and could not see anything related to this in there, while the leaves is looking for a third-party application that would allow, I'd be surprised if there isn't at least one in BBW or.

  .. .and that's only for minimum spammers E-mail ,.

  You can use the ability of substitution of Word devices BB10 to be an acronym auto penetrates into your message when typed.

• Presentation of the screen double with SX20

  I have two recently installed SX20 units which are registered on a VCS. Both units have the following options installed.

  NaturalPresenter

  MultiSite

  PremiumResolution

  DualDisplay

  What hosting a three-way one of the units (Site A) call displays a full screen remote part on the monitor of the first and the second remote side full screen on the second monitor. That's how I can expect it to appear. However, the second unit (Site B) shows two parts away on the first screen and displays only the presentations for the second screen that otherwise would be empty. I compared all the parameters and believe that they are the same for both units.

  To further complicate the issue when B Site hosts a multisite call or device uses the second screen for video. By selecting the options of the touchscreen controller layout did not involve video displayed on both screens.

  The following settings are configured under Advanced Configuration. Video.

  Monitors: double

  LocalLayoutFamily: automatic

  RemoteLayoutFamily: automatic

  Any ideas?

  What Site a using the on-board microcontroller, welcomes all sites, he will receive a video stream separated from each participants, however, it will be transcoded and it will send a composite stream that contains all the sites of the Conference on other sites - so this behavior is correct.

  Looks like that Site B has been configured with video output 'Role to monitor' value 'Format' only instead of "Second".

  /Jens

• Text single line with background Image field

  Hello

  I have the following requirement for a small number of topics on BasicEditField, but I couldn't find answers to my requirement, so post to the same

  My requirement

  1 must be the only editor of line text field with a width and a predefined height.

  2. If a background Image(For better look-rounded edge image like in Broswer)

  3. If the number of characters exceeds the single line, it has scroll horizontally right and from characters to scroll left with the appropriate property of the ellipse.

  4. in entering an Enter key (Center of select navigation Keys), it should call my method to perform an action.

  Enjoy a quick help on this

  Thanks in advance

  Q1. BasicEditField.NO_NEWLINE will stop people pressing enter and get a new line.

  Regarding your second question, I recommend that you check out the two videos on screens and area managers.

  As a general rule, a field is laid out (i.e. tells his manager what size he needs and then this rectangle is placed), then painted.  Exhibitor is managed by managers and put sublayout on the page for the fields.  The more important than sublayout and put thing in page do is specify the scope (width and height) they need, which fiddles and managers to make using the measure.

  Once all fields was laid out, then the visible parts of each field are painted using paint.  I've never used subpaint.

  I hope this helps.