that fact-MSXML 4.0 sp2 on my windows 7 sp1

Similar Questions

• Applications that use msxml do not load or use Windows 7 64-bit environment

  What happened several times. I have an installed application (Quickbooks pro 2010) that uses MSXML, and when I installed another application that uses MSXML, it fails to install, or install but does not work properly. (Both applications are supposed to be compatible with Windows 7)

  Is this a known issue?

  Hi Emanders,

  You receive an error message when you try to install or run programs?

  Who is the other program that fails to install or load?

  Access the link below and check if the programs are compatible with Windows 7 64 bit.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  However, you can try to unregister and reregister the MSXML.dll files on your computer and check if you can install and run programs.

  Run the command at the elevated command prompt, follow these steps:

  1. open the start menu, click programs principally made, select accessories.
  2. right click on command prompt, and then click "run as administrator".
  3. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  REGSVR32 MSXML3. DLL/U
  REGSVR32 MSXML3. DLL
  REGSVR32 MSXML4. DLL/U
  REGSVR32 MSXML4. DLL
  REGSVR32 MSXML6. DLL/U
  REGSVR32 MSXML6. DLL

  (At the elevated command prompt command should not give us any error).

  You can also open the event viewer and check if there are other important messages/error codes that is generated during installation or execution of the program and after return.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• SP2 update for Windows Vista SP1 Ultimate (x 64) Edition

  Just downloaded SP2 for Windows Vista Ultimate Edition (x 64) SP1 update.  Once the installation is finished, restarted the PC.  PC won't start windows?  Windows repair attempts, no luck.  During startup, stop at "78006/81420 (\Registry\machine\Schema\ wcn://Morcropsoft-windows-Microsof...).

  Hello

  Follow these steps:

  Step 1:

  Perform the system restore from safe mode to a restore point before the show.

  See also boot your computer in safe mode

  System Restore: frequently asked questions

  Step 2:

  Follow the steps in troubleshooting these items to troubleshoot problems when you install the Service Pack 2 (SP2):

  Learn how to install Windows Vista Service Pack 2 (SP2)

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

• MSXML 4.0 SP2 install error: 0x8007054F

  I have trouble to install anything that requires MSXML 4.0 SP2.  This is the error I get.  The GUID varies from an install to install it, but the error codes are consistent.  Please help, I can't understand what the problem is.

  Error 1935. An error occurred during the installation of Assembly component {303994BA-6487-47AE-AF1D-7AF6088EEBDB}. HRESULT: 0X8007054F. Assembly interface: returned IAssemblyCacheItem, function: commit, assembly name: Microsoft.MSXML2, publicKeyToken is "6bd6b9abf345378f", version = "4.20.9818.0", type = "win32" processorArchitecture = "x 86"
  
  I am running Windows 7 64 bit.

  Here are the logs:
  http://pastebin.com/fcf049b7
  http://pastebin.com/f4166ae80

  Any help would be greatly appreciated.

  Hello Alex Khristov,.

  Thanks for posting on the Microsoft answers Forum.

  I'd say run a SFC scan to see if there is any corrupt system files.

  Click Start

  Click on all programs

  Click Accessories, and then right-click on the command prompt.

  Select the Security tab and choose "Run as Administrator"

  Click on command prompt

  Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  Article number: 954430 - MS08-069: Description of the update of security for XML Core Services 4.0: November 11, 2008
  This KB should be the most recent file msxml4.0 SP2. Check your version of the file and the date stated in the above article.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• MSXML 4.0 SP2

  In the section "Add / Remove Programs", I came across a program called "MSXML 4.0 SP2. I tried to free up memory space by removing programs that I thought I could do without. I have never seen this program on my computer before and have no idea of what it is. What is its purpose, and do I need?

  Hi cindypayne,

  It is a Microsoft XML Core Services. Follow the article provided for more information.

  http://support.Microsoft.com/kb/927978

• Update MSXML 4.0 SP2 (KB936181), (KB941833), (KB954430), and (KB973688) necessary?

  I need MSXML 4.0 SP2 (KB936181), (KB941833), (KB954430) and (KB973688)? Otherwise why do I all of them and what exactly are doing?

  Hello

  Here are the security updates provided by Microsoft for Microsoft XML Core Services. I suggest you to check the links below to learn more about the updates.

  MS07-042: Description of the update of security for Microsoft XML Core Services 4.0: August 14, 2007

  http://support.Microsoft.com/kb/936181

  An update is available that improves the compatibility and the reliability of Microsoft XML Core Services 4.0 Service Pack 2 on a Windows Vista-based computer

  http://support.Microsoft.com/kb/941833

  MS08-069: Description of the update of security for XML Core Services 4.0: November 11, 2008

  http://support.Microsoft.com/kb/954430

  Description of an update for Microsoft XML Core Services 4.0 Service Pack 2

  http://support.Microsoft.com/kb/973688

  If you do not want to install the updates on the system, then you can hide. Click on the below mentioned link to hide.

  The problems with the removal of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-removing-updates

• Try using Nero Startsm It Show unable to create the Instance of the Xml parser, please reinstall Microsoft XML Core Services (MSXML) 4.0 Sp2 or later

  Restall Microsoft XML Core Service MSXML 4.0 Sp2 or higher what it means

  This means, * reinstall * not * Tassel * MS XML Core Services MSXML 4.0 SP2 or later.

  There is a newer version-

  MSXML 4.0 SP3 is a complete replacement of MSXML 4.0, MSXML 4.0 SP1 and MSXML 4.0 SP2. This service pack provides a number of security enhancements and improved reliability.
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7f6c0cb4-7a5e-4790-a7cf-9e139e6819c0&displaylang=en

  BTW - for future reference-

  How to ask a question:
  http://support.Microsoft.com/kb/555375

  and

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395
  What information to post in the Windows Update forum

  Windows Update forum is one of the three forums that doesn't have different forums for different versions of Windows (Internet Explorer and the game are the others).  With this in mind, we ask that you postat LEAST the following information.  If you don't know how to find some of the information and then post what you can and let us know that you need help to find information.

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.

  If the question is never happened before with other updates.

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• MSXML 4.0 sp2 (kb973688) ruined my PC!

  Nothing opens once updated widows installed MSXML 4.0 sp2 (kb973688) 11/25/09. Unable to open Windows Update, network and sharing Center, Control Panel(sometimes in classic view it comes up), Microsoft OneCare, MSCONFIG... Tried UN-installing but just blocking the PC. Most things seem to go very well in Safe Mode, but can not uninstall mode without failure. Was able to stop all applications since the 1st commissioning noticed problem when Windows OneCare would give error that stopped running. Eventually noticed it was impossible to connect to any WiFi network. Eventually figured out that basically any Microsoft application opens upward. Was working fine before this installation, previous installation has been more than 2 months before. System Restore does not see any point prior to this installation.

  Hello

  There seems to be a conflict with all the background are running programs. Try to perform a clean boot in safe mode and check if that helps.

  Follow the steps in the article mentioned below to start in safe mode with network.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to connect to the internet in safe mode with network try to download the utility Windows Installer Cleanup from the link below and try to remove the update from the computer and check if that helps.

  http://support.Microsoft.com/kb/290301

  Install the utility and run it in normal mode and then try to uninstall the update.

  When on the desktop try to perform a clean boot and check that the program is causing the problem.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start office check if the problem persists, follow the steps in the article and find out which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

  Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

  See the section "How to get help", for example, http://support.microsoft.com/kb/927978

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Display of MSXML 4.0 SP2 as an unidentified program?

  I have a few programs not identified in my windows uninstaller program.

  1 (4 x) MSXML 4.0 SP2 (KB936181)
  (KB941833)
  (KB954430)
  (KB973688)
  2 Microsoft Visual c++ + 2008 ATL Update kb973923 - x 86 8.0.50727.4053
  Microsoft Visual c ++ 2005 redistributable
  Microsoft Visual c++ + 2008 ATL Update kb973924 - x 86 9.0.30729.4148
  (C2 is the icon of it only) Microsoft Visual c++ + 2008 redistributable - x 86 9.0.21022
  Microsoft Visual c++ + 2008 redistributable - x 86 9.0.30729.17
  Microsoft Visual c++ + 2008 redistributable - x 86 9.0.30729.4148
  Why these manifest not identified, that this has something to do with why I can't fix anything to emails?

  Solving problems with Windows Installer

  http://support.Microsoft.com/kb/907749

• REINSTALL MSXML 4.0 SP2

  When I try to open the program Nero, pops up an error that says, cannot create the instance of aXML Analyzer, please reinstall Microsoft XML (MSXML) 4.0 SP2 base services, please I NEED HELP!... Thank you

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• I need MSXML 4.0 SP2 (KB954430) MSXML 4.0 SP2 (KB973688) and MSXML 4.0 SP2 Parser and SDK on my computer

  I checked my add and remove programs in Control Panel to remove things that I didn't need and I came across microsoft visual c ++ 2005 Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.17 Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.4148 Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.6161 do I need these if I need to only those who need to I remove as I fell on MSXML 4.0 SP2 (KB954430) MSXML 4.0 SP2 (KB973688) and MSXML 4.0 SP2 Parser and SDK I don't need of these to

  Hello

  Here are a few updates which may be needed to run certain programs installed on the computer. If you remove the updates then the program that requires these updates may not work correctly

• An error occurred during the installation of Assembly component, cannot install MSXML 4.0 SP2

  Original title: error downloading MSXML 4.0 SP2

  I have trouble to install MSXML 4.0 SP2 Parser and SDK.  An error message appeared:
  An error occurred during the installation of assembly component
  {303994BA-6487-47AE-AF-1D-7AF6088EEBDB}.
  HRESULT: 0X800736FD.

  Hello

  1. What is the exact full error you get when you try to install MSXML 4.0 SP2?

  2 are you able to install other applications on your computer successfully?

  3. how you try to install the MSXML 4.0 SP2?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can run the fix - it from the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  Step 1:

  You try to install MSXML 4.0 Service Pack 2 in the clean boot state. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Step 2:

  Check out the following link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=13631

  See also:

  http://social.msdn.Microsoft.com/forums/en-CA/xmlandnetfx/thread/e7a63b76-63ec-47A9-86fa-7e7cdb2bc0a8

  http://support.Microsoft.com/kb/973688

  It will be useful.

• that fact view Reader in firefox? I can't wait to hear the Forum thank you.

  that fact view Reader in firefox? I can't wait to hear the Forum thank you.

  Hello

  You can read all about Firefox reader discovers in this article.

  I hope that this helps, but please come back here if you have any questions.

• For the reader to lcloud that fact to the Dropbox app?

  Under settings - ICloud - ICloud Drive

  That fact to the Dropbox app?  For example allow access ICloud drive to DropBox. I need to turn on this switch road ICloud save my Dropbox files. Thanks for your time and your help.

  There is no relationship between iCloud Drive and Dropbox to my knowledge. .

  Two similar services provided by different companies.