That the consignment by BatchUploader/other apps display in the console?

Similar Questions

• How to make the console window appear again

  Hi all

  Sorry if this is a stupid question, but in my FM9 I don't get to see the window of the console. There is no mention of the console in one of the menus and even the help file does not at all. I write messages on the console using FrameScript, but I don't see them as there is no window console anywhere. What I am doing wrong?

  Jang

  This is an old post on the list of editors:

  Look in the preferences to "Display file translation errors" (which corresponds

  for the ShowErrors parameter in the maker.ini file). In accordance with the

  Manuals Online:

  • ShowErrors determines if the error messages are displayed in the console

  window when they occur.

  I think that turning it off means that the Console window is not open

  Not at all.

• 'Vista Internet Security' claims that I have infections but other software do not find them; asking me to purchase the program before deleting infections; balloons of warning that I can't turn off is displayed.

  Hello

  A program called 'Vista Internet Security' randomly started scanning my computer today, even if I was not said or was even aware I had. She argues there are 33 infections on my PC and than remove them I have to sign up and buy the program (which I do not!). Even if I click remind me later or leave unprotected it pop again alerts such as Stealth Inrusion balloons! Misuse of the system! System Danger! Found tracking software! Security breach! and private life threatening! It resembles a formal program, but it is not on my PC anywhere. It says 'upgrade to the full version of Vista Internet Security security software now! Clean your system and avoid new attacks. »

  I ran the Spybot program, but he found nothing. I have installed McAfee so I ran which but he found nothing also. I am running Malwarebytes' Anti-Malware scan but it has yet to find anything.

  http://www.bleepingcomputer.com/virus-removal/remove-Internet-Security-2010

  Internet Security 2010 is a fake anti-spyware that is installed through the use of malicious software. Once installed, Internet Security will be configured to start automatically when you log in to Windows. It will then scan your computer and display many infections, but will not remove anything until you purchase the program. These infections, however, are all fake and are only to demonstrate that they trick you into thinking you are infected so that you then purchase the program. It goes without saying that you should definitely not buy this program.

  Follow the steps CORRECT on the link above to remove it, including STOP the THIEF treat 1st before you scan them for it with Malwarebytes:

  1. Print out these instructions we will have to close each open window later in the fix.
  2. Before we do anything, we must first end to the processes that belong to Internet Security 2010 so that it does not interfere with the cleaning procedure. To do this, download the following file on your desktop.

     Rkill.com download link

  3. Once it is downloaded, double-click on the rkill.com in order to try automatically stop all processes related to Internet Security 2010 and other Rogue programs. Please be patient while the program seeks to various malware programs and end to them. When it's over, the black window will close automatically and you can continue to the next step. If you get a message that rkill is an infection, don't be concerned. This message is just a fake warning given by Internet Security 2010, when it terminates programs that can potentially remove. If you encounter these infections warnings that close Rkill, a tip is to leave the warning on the screen and then run Rkill again. By without closing the warning, this typically will allow you to bypass the malware trying to protect itself so that rkill can terminate Internet Security 2010. So, please try to run Rkill until malware is no longer running. You will then be able to proceed with the rest of the guide.

     Do not restart your computer after running rkill as malware programs will start again.

     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  As this infection deletes a core of Malwarebytes executable', we will need to download a new copy of it and place it in the folder Anti - Malware\ C:\program Malwarebytes'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

   

   

  Read all the information below before you start:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes after installation:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  And then run Spybot Search & Destroy.

  See you soon.

  Mick Murphy - Microsoft partner

• Why does say download error when I download creative cloud? It worked the other day, but when I came back on my laptop that I couldn't open my apps I had installed

  Why does say download error when I download creative cloud? It worked the other day, but when I came back on my laptop that I couldn't open my apps I had installed

  Hello

  Please see the links below for help:

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

  Re: Creative Cloud "Download error" message

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Hope this helps!

• How to view the monthly/annual statistics in terms of time past/calories burned, broken down by each individual activity such as run elliptical/outside etc. Y at - it a third party application that can help me to collect and display these data?

  How to view the monthly/annual statistics in terms of time past/calories burned, broken down by each individual activity such as run elliptical/outside etc. Y at - it a third party application that can help me to collect and display these data?

  Hello

  It is not currently possible to review the data the application integrated in activity or training on this basis. If you want Apple to consider adding this feature, you can suggest here:

  https://www.Apple.com/feedback/watch.html

  However, health and fitness data from other sources, iPhone, and Apple Watch are registered and grouped within the health on iPhone app. These data can be exported, which you may find useful to track the cumulative progress and/or analyze your activity more in detail.

  IPhone app activity also has a button for sharing (top right of the screen) that allows to share data - including social media, Messages, Mail, Notes, and a printer.

  Include third-party applications that can be useful, for example:

  Access to QS

  -"Access your HealthKit data in a table so you can Explorer using numbers, Excel, R, or any other tool compatible CSV."

  - https://itunes.apple.com/gb/app/qs-access/id920297614?mt=8

  SpectaRun workouts

  -"View from the workouts of your Apple Watch on your iPhone and to export these workouts so you can download them to your favorite online running community."

  - https://itunes.apple.com/gb/app/spectarun-workouts/id991723862?mt=8

  Data can also be exported directly from the application of the health (Health Data > All - Share at the top button on the right).

  Check the descriptions and support resources for third party applications for supported details of import and data analysis features.

  More information:

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  http://www.Apple.com/watch/health-and-fitness/

• What happened at the sight of split with iOS 10 on iPad? Before the download, I could open next to safari pages or other apps.

  What happened at the sight of split with iOS 10 on iPad? Before the download, I could open next to safari pages or other apps.

  Still, it works as before, or if.  Check your multitasking general, settings and make sure that it not turns off somehow.

• The top of page 1 1/4 inch has no answer whin you click on it. As in this page, sign in or register and other app does not work. in English

  The top of page 1 1/4 inch has no response when you click it. As in this page, sign in or register and other app does not work. in English

  This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• FF8 shows the content online, just local content (offline); Other browsers display the content online. (MAC OS x Lion)

  I just posted a few weeks ago this

  https://support.Mozilla.com/en-us/questions/894108

  I followed the guides I mentioned in there, without success.

  My problem:
  For example, I can navigate a Site on Chrome, I saved a full page on my local machine to Chrome content... Then, I opened this page on firefox and I can see the content. When I visit your site directly from FF, the area of the page keep at bottom white, all content is displayed.

  Any suggestions, idea, tip, hint?

  Rgds,
  iVieL

  OK, finally FF8 works.

  In other posts, said that I need to check the firewall or antivirus rules and restrictions. Well, I did it, I disabled my native firewall without a bit of luck. I installed Little Snitch, and I have disabled too for the connectivity test FF8... range of success either.

  Just today, I found a post in a forum that said literally:

  "To anyone who still has problems, it may be because you have Little Snitch installed 2.4.0. This is a bug known for this version. Try to update to 2.4.2. »

  I was using 2.4.0 version and some update to last... but FF8 did still no work... lol... I just decide to disable and FF8 works perfectly. Now I just delete all my Little Snitch rules.

  This hotfix, the problem, but I make sure that the update fixes the problem, or only the Little Snitch rules clean.

  Rgds, iVieL

• How to turn off the most recent list used to term & other apps

  were if you search the registry problem disable MRU in all applications, especially the run command on the start menu, but I would like to eliminate all the other apps as well

  I found several solutions including one that mentions comdlg32, others who need to add fields to the register, any other fair value dword

  Is there a single solution or do I need a combination of solutions

  I didn't do this, but here I found at least 5 versions, one of which is correct & universal
  :
  1. [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Comdlg32]
  "NoFileMru" = DWORD: 00000001

  2.HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Value name: NoRecentDocsMenu
  Value type: REG_DWORD
  Value data: 0 or 1
  0 = Yes, allow these recent docs
  1 = no, do not allow any recent docs

  Value name: ClearRecentDocsOnExit
  Value type: REG_DWORD
  Value data: 0 or 1
  0 = no does not clear
  1 = Yes, clearly their

  Value name: NoRecentDocsHistory
  Value type: REG_DWORD
  Value data: 0 or 1
  0 = historic Yes
  1 = no history

  3 turn off the history:
  Click Start--> Run--> type "regedit" in the Run dialog box.
  When in the registry, locate the following key:
  HKEY_CURRENT_USER > Software > Microsoft > Windows > CurrentVersion > Explorer > RunMRU.
  Right click on the RunMRU key and choose "Permissions."... ».
  Click on "Add..." ».
  Type "Everyone" and click OK in the box that opens.
  In the permissions (security) dialog box, select all and then deny read access.
  Click OK.
  Close the registry editor. You may need to restart your computer for the changes to take effect

  ' 4 ' most recently used ' list - how to disable file
  Previous

  The information in this article applies to:

  WinWay RESUME 9.0 and versions later

  Summary

  Like many other Windows applications, the menu 'File' of WinWay RESUME luxury offers easy access to read files recently. This article explains how to remove this list.
  More information

  Windows offers a system policy to disable the file 'most recently used' lists for applications in accordance with this particular policy standard.
  To turn off the "most recently used" list of files, download and run this file.
  To restore the list, download and run this file.

  Notes:

  This setting affects several applications, not only WinWay RESUME
  This setting applies only to the user currently logged on to the computer. You can repeat these steps for the other connections if necessary

  For advanced users

  The parameters above can be entered through the Publisher of the registry as well.

  Select Start, run, Reg Edit
  Navigate to this registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  To disable the "recently used file list", adds the value:

  Name: NoRecentDocsHistory
  Type: DWORD
  Value: 1

  To activate the "recently used file list", right-click on the 'NoRecentDocsHistory' and select 'delete '.

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion \Policies\Comdlg32 key. 2. create a REG_DWORD value called NoFileMru and set the value to 1.

  5.
  Type regedit in the box RUN, and then press ENTER. It will open the registry editor.

  2. now go to following keys successively:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer
  HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  In the right pane, look for a DWORD 'ClearRecentDocsOnExit '. Its value could be set to 1. Set its value to 0 or delete it completely.

  The recent documents menu can be disabled easily by editing the registry. To do this, go to the following key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Now in the right pane, create a new DWORD with the name: NoRecentDocsMenu and set its value to 1. Restart the browser to save the changes.
  You can also clear the RUN MRU history. All ads are stored in the key:
  HKEY_USERS\. Default\Software\Microsoft\Windows\CurrentVersion\Explorer\RunMRU
  You can remove individual entries or the entire list. To remove history to find inscriptions date on:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Doc find Spec MRU and delete.

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Almost every time that I do a right-click to display a menu to do something such as delete or copy, the following error message appears: program internal error:.\Src\IntegrationToolsHolder.cpp,21

  Original title: internal program Errror

  I use XP Professional 32-bit.

  Almost every time that I do a right-click to display a menu of something for example delete or copy, you receive the following error message.

  Program internal error:.\Src\IntegrationToolsHolder.cpp,21

  If I click OK on the error message, it goes & I can then right click New & the appropriate menu appears and works correctly.

  Any ideas, please, as to what is the cause?

  Kind regards

  I told you I want to talk to you soon as you try these things.

  How to boot in Safe Mode and Clean worked for you?  Not at all useful?

  You said about this 2 weeks ago?

  Yet once, I fell in this place and the time and effort wasted because MS Answers forums invite to no system information when a new question is asked - but I digress.

  Update of security 908513 is included in Service Pack 3 update.

  Since forums MS Answers asks you any information from system when a new question is asked, we don't even know what Service Pack you have.  If you have SP3, you already have the update.  Two weeks and we don't know what is your Service Pack, what is your antivirus/antimalware environment...  We know that you have XP Pro 32-bit however.

  What you're likely to have is an extension of the Explorer Shell with a malfunction, and you can usually understand as follows:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  If you can really achieve almost everytime you do a right-click and choose something like delete or copy, you're well on your way to understand.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success about the errors with the extension and to what other people have done on it... Maybe just to get an update of the program that adds the suspicious extension.

  You can Google something like:

  Explorer XP crashing

  (you must complete your suspect on behalf of add on)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately turned off, to disable an extension does not require a restart, but if you find the problem, I reboot and retest in all cases to be sure that the problem has disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  original title: battery problem

  To all,

  When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  I unplugged the battery taken power and put it back it, that did not work,

  The battery is fully charged and when I check the battery in the control panel for the strength of the battery, the system is telling me, it is fully charged and there is nothing wrong with my battery.

  Then I ask why I get this error when I start my computer.

  Can anyone help me on how can I do to fix it.

  Thank you

  Russell Froedge

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• text in black in the e-mail and other apps - but the receiver see only colors

  I have windows 7 ultimate with all updated. After a malicious software solution - many things have been updated, then I noticed only with the help of "excerpt from" I could no long sketch on this color - there choice of feathers coloured circle something for example before emailing or registration of the code snippet. many things have been updated during the correction that brought me to the wide on the wrong track, thinking he had corrupted files.  Now, it turns out that in an email (office 2010 Microsoft) that sending an e-mail I can highlight to change the color of the text - or set the color in advance but I see black only. When I send emails to others and myself to see the email on my iphone - the they and I see that colors encountered normal to the recipient. my computer has a special installation of an expensive video card - which was needed because I have a large monitor of proffesional super high def for cad cam programming. But now that the color of the text - or when sketch turns appears on all programs, such as the writing of enamel: enamel in red text as a test-it shows that something is wrong, or I need the updates for my 'graphics card '?   various updates are usually automatically - and the speed and operation of the computer is very high (5.9) - with more max (7.9)

  all colors are perfect in most other areas - even in the email upward at the top as all the buttons and icons are perfect in the colors of the Rainbow complete - all photo - and all Web pages are perfect color.  If the computer does not fell down with display problems.

  My computer expertise is very high, using cad cam - but things like mothers and the graphics drivers updates - my knowledge is very low - these things were always taken care to work by others - to make matters worse - I is no longer working and cannot afford to take computer or buy a new one... any help or advice would be appreciated... is there such a thing to "update of video or graphic drivers?"

  ' all text black s in enamel and retrieves a graphics card problem?  Can I get a computer to have graphics card replaced is bad comes to worse - but the video card to power the monitor cost more then the computer. HP p6210Y

  Hello

  Try these links:

  http://Windows.Microsoft.com/en-in/Windows7/change-color-management-settings

  http://Windows.Microsoft.com/en-in/Windows7/calibrate-your-display

  Good day!

• Cannot configure gmail with messaging metro app error unable to connect. Make sure that the information you entered is correct

  I was able to add an account Gmail for Windows 8 Mail App on my first install and everything worked well. Then bought an SSD and completely installed a new OS of Windows 8 it. Connected with the Live account that I used with the first installation of windows 8. All synchronized. The Mail app has Live accounts and Gmail put in place without having to re-enter the information myself. However, I noticed that Gmail sync never even when I choose sync. Removed from the account to add it again, but have failed so far. Keep gives me the error "unable to connect. Make sure that the information you entered is correct. "Tried to install it on my phone Windows 8 (Nokia 920) and he keeps asking me to re-enter the password. I'm 100% sure that I have no 2-step check set up I checked several times. Never allowed them in the first place.

  At this point, I don't know if it's Google problem or the problem of the Mail application. Any suggestion?

  I also had the same problem. I had no problem for the other three Windows 8 install / computers that I used and the last she has imported all the fine adjustments. However, I had a portable Windows 8 different today and worked alone of my three accounts to Gmail. How I fixed it:

  Of the Mail app: charms > settings > accounts > add account > other account (NOT GMAIL!)
  Click IMAP for account type, then enter your credentials as usual. It connected and synchronized immediately for me.
  Hope this helps!

• What are the criteria that the music App or music cloud determines if a song should be reported as 'stream only?

  • I have a very large music library that I uploaded to the cloud.
  • All the files are physically located on a local hard drive.
  • All files are .mp3.
  • All files were purchased from sources other than the music of the Xbox.
  In a seemingly random way, there are songs that have been reported as 'stream only' despite the above conditions.
  In some cases a single song in an album has been reported as 'stream only.
  What are the criteria that the music app or music cloud determines if a song has to be marked as 'stream only'?  If I had this info, maybe I could understand something.
  Please don't tell me to do something about that.  My huge music library; 45K songs, 260 GB in size.  Change files and turn on clouds or extinguish any simply questions I have hours of work manually download songs to the cloud which music xbox has not recognized.

  Hello..

  See this article for more information on the application of music

  http://msdn.Microsoft.com/en-us/library/Windows/apps/hh868270.aspx

  http://Windows.Microsoft.com/en-in/Windows-8/play-music#1TC=T1