The 10A BB10 blackBerry os upgrade

Similar Questions

• BlackBerry Smartphones Upgrade causes the connection Bluetooth to the desktop software does not work

  I'm a business traveler road warrior who lives and dies by my BlackBerry synced with my laptop.  I just spent most of November on the road and worked hard the BB and laptop.  The two worked perfectly.  I was able to sync the BB to the laptop with Bluetooth or USB cable and not problems.  Since I was AT & T, I could use the BB as a modem for laptop and get 3G service everywhere wherever I was going.  Life was good back in the day... November 2010.

  Then... I get some downtime and decide to meet the guests of the BlackBerry software desktop that there are updates available for the desktop software and software of the device of 9000 "BOLD".  I decided that since I have no immediate need and criticism so I can update.  So I update.

  I updated the software to version 5. something to 6.0.0.43 version.  Once the software has been updated, I get a prompt to upgrade the 9000 to a new version of software for device.  So I move from 4.6.something to 5.0.0.82 2.

  I do a couple of synchronization with the USB cable and I feel good.  Then I try to sync using bluetooth.  No joy.  Unable to get the desktop software to see the Blackberry.  The 9000 "BOLD" connects to Windows 7 OK and I can even use the laptop as a speaker.

  So I go through the "Add bluetooth device" menu and office procedures.  During the search of a device discoverable bluetooth, the 9000 "BOLD" is so I clicked and respond OK.  Then I went back to the Bluetooth Configuration screen where nothing appears.  I can't add the 9000 "BOLD" for Desktop software.  Something is not.

  Nothing is more exasperating to have everything to work perfectly, apply the updates recommended by the provider of the software, and then have things get broken and stop working.  Before after the Desktop software prompts to upgrade, I worked flawlessly.  After you apply the upgrade of Desktop software and device software upgrade, I can not connect with Bluetooth.

  I searched on the Internet until I no longer have to read in order to find a solution but can't seem to find a solution.  Maybe I'm just angry with RIM and these horrible upgrades that utility that I really liked.

  Let me answer a few questions before someone decides to help him.

  Is your BlackBerry detectable, so she can be found and associated with?  Yes, I updated the device discoverable.

  You can pair your BlackBerry with Windows 7 64 bit?  Yes.  No problem.  I can use the laptop running Windows 7 64 bit as a speaker with the BB.

  Could you have made other changes that may have caused the problem?  Nope.  I did not follow the guidelines of RIM in updgrading Desktop software and device software.  I suppose that, in this case, I followed the destruction of the RIM.

  You do backup your BlackBerry 9000 "BOLD" before upgrading the device software?  Yes.  I'm not stupid and don't trust any upgrade for the exact reasons, I'm writing on this forum.

  You have a Windows 7 restore set where you can go back to a point in time before you upgraded the Software Desktop 5 point. something to 6.0.0.43?  Yes.  I have a restore point.

  Do you have confidence that you can do both a restore of Windows 7 to get something back to 5. AND then to restore the device to 4.6.something?  Man, that thought makes me sick at heart.  I trust both RIM and MSFT to do their work and we know that RIM was screwed up, or I wouldn't be here today.

  Can anyone help with obtaining of BlackBerry Desktop Software 6.0.0.43 (updated 5.something) version to see and the pair with a BlackBerry 9000 "BOLD" which had 6.0.0.43 improve software 4.6.something to 5.0.0.82 device 2?

  It is confirmed.  5.0.0.82 2 is total c * p.  Who knows what complete insanity due to RIM out a such terrible and wounded many customers update.

  I was able to downgrade from 5.0.0.82 2 to 4.6.0.304.  Compatible bluetooth and connected seemlesly, even if the connection has been very sloew the order of minutes of time to the Desktop Manager.

  Here are the instructions to downgrade.

  1 remove the newer operating system of your PC by going to control panel > Add/Remove programs.

  2. next, download and install the earlier version of the operating system. BlackBerry operating system downloads

  Find here the operating systems:

  http://BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

  3. install the older operating system to the computer by running (double click) the downloaded file.

  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

  (I had to look for vendor.xml as I have Windows 7, but when I found and deleted things work as described).

  5. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  These instructions worked like a charm.  Connected to Desktop Manager and did a sync as soon as the 9000 "BOLD" restarted.  Apparently, the problem was my stupidly following the recommendation to upgrade the operating system to 5.0.0.82 2.

  ****************************************************************************************************

  I found these other topics in this forum.  A couple of them express my feelings.

  1. "BOLD" upgrade to the new OS 5.0 ATT, worked for six hours and now quite dead

  2 BOLD 9000 update

  3 bold 9000 problem after upgrade to 5.0

  4 KB24307
  It is a question has already been given that is reviewed by our development team. No resolution time is currently available.

  5. problem with 5.0.0.82 2

  Good comments in this thread!

  6. upgrade to 5.0.0.82 2 now no visual voicemail (ATT)
  Just another thing about the 5.0.0.82 2 upgrade... IT SUCKS DO NOT! The SMS is now garbage as it collects all text messages and combines a conversation and you cannot choose to delete or restart without deleting the text entering of this person and everything behind it. Until the Bugs are worked out stay away 5.0 versions (anything ending in par.822 and earlier) just my 2 cents worth

  7. problems with the new OS 2 and put 5.0.0.82 at level of the desktop software?

  Good comments in this thread!
  8 losing sound on 9000 "BOLD" after downloading the OS 5.0
  I suggest that you go to 4.6 this latest OS 5.0.0.82 2 is broken.  RIM has published a BONE broken to the unsuspecting public.

• Problems of blackBerry Smartphones upgrade my Curve 8520 to the new version of the 5.0 software

  Hello

  I tried to update my BB Curve with the new software last night... I supported everything first... he crossed the 4 step process of update, but blocked on "restart" & just stood there.

  I know he said do not interrupt or disconnect during the update, so I went to bed & leaves to do it's thing... after 6 hours, he had not moved, I had to kill it.

  Now I've lost my contacts, history, files etc... purpose that I know they are on my PC somewhere because the update system has done its own backup, so I have to be able to 'restore' myself...

  Please can you help me?

  Thanks in advance, Simon

  Hi & Welcome to the community... !!

  First of all, please let us know, reloading the OS on blackberry is successful or not, so successuful then gr8.

  Secondly, as you said, you supported your device first of all, if you can restore the data from there, other wise, you can recover from the default backup location, where DM is saved automatically.

• How do I refresh the page on the orientation using Blackberry 9800 "BOLD" change

  Hello everyone,

  I'm working on an application in which I use both portrait and landscape. But the problem is that if I start the application in profile mode then it adjusts the image according to the style of portrait but I change mobile orientation in landscape mode on the screen even Conversely it will not change in size and based on this image... Like the following picture:

  

  Although I usinng such formula for resize and I have these images based on different sizes, but it is not updated. Kindly tell me how I can do it.

  final _backgroundBitmap Bitmap = Bitmap.getBitmapResource (Display.getWidth () + "x" + Display.getHeight () + ".png");

  for example 480x240.png, 640x360.png

  VerticalFieldManager CurvedSquareImage = VerticalFieldManager(VerticalFieldManager.USE_ALL_WIDTH | nouveau VerticalFieldManager.USE_ALL_HEIGHT)
  {
  protected void sublayout (int mWidth, int mHeight)
  {

  Super.sublayout (Display.getWidth (), Display.getHeight ());
  setExtent (Display.getWidth (), Display.getHeight ());

  }
  public void paint (Graphics graphics)
  {
  graphics.drawBitmap (0, 0, mWidth, mHeight, _backgroundBitmap, 0, 0);
  Super.Paint (Graphics);
  }

  };

  Thanks in advance.

  I keep seeing this code, I would like to know where it comes from:

  protected void sublayout (int mWidth, int mHeight)
  {

  Super.sublayout (Display.getWidth (), Display.getHeight ());
  setExtent (Display.getWidth (), Display.getHeight ());

  }

  This sublayout() is not correct for two reasons:

  (a) If you want to limit the height and width of the Manager, you must make sure that your Manager is already limited to something less that what you try.  So, you should do something like:

  Super.sublayout ((Display.getWidth (), mWidth) Math.min Math.min (Display.getHeight (), mHeight));

  In this case, it seems you have the toolbar at the top, likely in the area of title or the banner of a screen, and so you have in fact the entire height of the screen in any case.

  (b) If you ask a Manager to ask, then you should respect the size it uses.  If you force a size using

  setExtent (Display.getWidth (), Display.getHeight ());

  then you have potentially confused it because he thinks he has the size, he asked, and actually require you to use a different size.

  Please correct that code and correct whenever you use it.

  I recommend you round eye for documentation and examples for managers to understand how you use one before you start the substitution of methods.  I particularly recommend that consult you this:

  http://supportforums.BlackBerry.com/T5/Java-development/MainScreen-explained/Ta-p/606644

  because it will help you understand how to tell a Manager to use all of the space available to it.

  Now to your problem.

  On the reorientation, sublayout for your handler will be called, so he will have to choose the correct image.  Now, if you change the image in the layout, you actually ask the device to the new layout in the layout, and he tells you that he cannot do it - it will throw an exception.  It must be so, in sublayout, use the code as follows:

  UiApplication.getUiApplication () .invokeLater (new Runnable() {}

  public void run() {}

  update the bitmap here

  }

  });

  What this will do is update the image and the update will force another layout of all fields - in other words sublayout will be called again, but this time with the right image.

  Because sublayout will be called once again, you must be sure that you start the update of the Bitmap again.  So what I do usually is an indicator that specifies the orientation that I expect, and if it changes, set it to the new orientation and pitch upgrades required due to the change.

  Put logging statements in your code to sublayout to make sure that you are having problems of infinite loop in there.

• BlackBerry Passport email Html appears in the Hub on Blackberry Passport

  Dear Support Forums,

  I have recently upgraded to a new phone (BlackBerry passport) and have encountered a problem with my email.

  I am not able to display html emails in my inbox on my device. When I saw the same email from my desktop via outlook or webmail it displays very well.
  I can view emails html of my other personal e-mail accounts very well on the device, however, it's just my business email which will not display emails correctly on the device. I jumped through all the hoops support with technical support from my mobile provider and technical support of my corporate email provider already and they have determined that the problem is the end of Blackberry.

  I would like to know if there is something that can be done to help.
  Thank you

  noelgREALTY.

  As temporary (since my last post) I had the account e-mail problem and set up the Activesync for contacts & calendar only (no e-mail) and set up a separate IMAP on the same device for the part by e-mail only. In this configuration, I could get HTML emails as usual, but I lost the functionality to send Calendar invites via ActiveSync.

  I did updates BBOS and whenever have tried turning on the email back for ActiveSync see the updates addressed the issue. I had not checked it lately / after the update so I tried today and voila! My ActiveSync email now displays HTML emails as usual in my problem email account. If all is good now.

• How to get the Version of Blackberry Messenger in webworks

  I would like to know if its possible for me to get the version of Blackberry Messenger installed on Blackbery device from my application webworks.

  I need to know how to do that because I intend to connect my blackberry webworks for BBM 6 application. So I need to know if the user has version 6, so I can tell them to upgrade if it is not.

  Thank you

  
  

• Smartphones blackBerry 8220 upgraded to v.4.6.0.180 (Platform 4.1.0.61) and now I can't use Desktop Manager

  I upgraded a.180 to resolve a peripheral gel during the BrickBreaker game. As expected lost all the data of the Organizer, but while I see the hand shake between Desktop Manager (version 4.7) and the Device Manager displays a connection, I cannot perform backups and worse still, cannot sync the Organizer. I have uninstalled and reinstalled software and battery shot til the cows come home. How can I recover the functionality again if this isn't just another nice phone?

  Randy

  Away sometimes a problem for a little help. It turns out that the 4.6.0.180 upgrade process wiped some data from before the upgrade, but not all. The material was left out of an installation of Pocket Informant for Blackberry.

  Solution was to go to [Options]--> [Advanced Options]--> [Applications] and remove the non-Blackberry files (in this case, the Pocket Informant over material). Save and Exit, reboot and the problem disappears.

  Randy

• Smartphone blackBerry OS upgrade of risk?

  Hello Forum,

  Is there a risk to the upgrade of the OS for the storm with the package of another carrier?  There are carriers of specific components that will impact operation on my home network?

  I am very interested in the new version.148 and the promises for fixes of minor bugs from my actuelle.122 version, but I don't want to update to the risk of 'disturbing the spoilsport"so to speak... My service is through Services of telecommunications in Trinidad & Tobago, they aren't real quick with a lot no matter what... It takes months for them to set a fixed line, so I can only assume that it will be some time before they roll all upgrade version for the storm (especially since the device is in the country for a month).

  So, with that said, any input?

  Thanks in advance,

  William

  The only problem you might have is IF you were to need guaranteed support for your provider so that you have the version.148 on your device, and if your operator has not released it themselves. At this point, all you have to do is downgrade to their recognized release.

  Otherwise, no problem to do so. I rarely ran OS release of my own carrier on any BlackBerry for the past three years.

  I encourage you to read this link for more information on global questions points 1, 2 and 3:

  http://www.port3101.org/power-users/296-BlackBerry-OS-upgrade-including-betas-myths-dispelled.html?h...

• To print messages in Gmail, I used to click on "Firefox" in red at the top left. I upgraded and now it's gone. I would like to print an email I received. How do I do that?

  To print messages in Gmail, I used to click on "Firefox" in red at the top left. I upgraded and now it's gone. I would like to print an email I received. How do I do that?

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).

  You see the orange Firefox button if the menu bar is hidden (view > toolbars).

  If the menu bar is hidden, then press the F10 key or hold down the Alt key to make the call of menu bar.

  Make toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars" or "Firefox > Options.

• Gmail said "some important features may not work in this version of your browser, if you have been directed to the basic HTML version. Upgrade to a modern, like Google Chrome browser. Try the standard version in any case. "

  When I visit Gmail using Firefox version 8.0 (running w7) I get this message: "important features may not work in this version of your browser, if you have been directed to the basic HTML version. Upgrade to a modern, like Google Chrome browser. Try the standard version in any case. "

  When I click "Try Standard Version Anyway" it works, but for some reason, Gmail is say that Firefox 8.0 is not a modern browser. Also, whenever I visit Gmail, he returned to the basic HTML version... ba.

  It seems that Google is trying to make you switch to Chrome. I would stick with Firefox, but Gmail is an important part of my browsing...

  I found the solution... browsing around, I found this link:

  http://www.Google.sh/support/forum/p/Gmail/thread?TID=627898d83a02180f & hl = in

  In type of Firefox:

  Subject: config

  Filter the results with:

  "general.useragent.

  All fields that are "BOLD" must be reset to ZERO. Do a RIGHT CLICK and RESET each field "BOLD".

  Worked on my w7 machine!

• The wiki of mozilla said upgrades would be on Feb. 14. Four days later you'd corrected dates would be available!

  The wiki of mozilla said upgrades would be on Feb. 14. Four days later you'd corrected dates would be available!

  The release has been delayed while Mozilla will investigate a stability problem when building that was to become the Firefox 3.6.14. It is originally a landslide on the day on the release day.

• I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings?

  I just bought a new air of IPad.  It came with IOS 9.1 and I can't restore it from the cloud until I have upgrade to 9.2.1 How can I do this since I can't access my settings until the IPad is set up?

  Set up as a new device, the Update 9.2.1 the restore to original settings and then load the backup.

  (139893)

• EliteBook 8560p: HP Elitebook 8560p has the possibility of a graphics upgrade?

  Try to improve the performance of my laptop for games. Cannot afford anything more than 50quid at the moment and I've seen a graphics card on Ebay that says that the guy is compatible with this laptop, but wanted to check with your people first...

  Can the HP 8650P take an upgrade?

  Here is the Manual:

  Manual

  There is no reference to an MXM slot or a separate replaceable part video card, so the answer is no your video is not extensible. If it was that you couldn't get a MXM graphics card which was worth having for 50 pounds. They cost more like 150 quid.

• 8500 a909n all-in-one: could not find a way to install the HP Solution Center after upgrade to win 10

  Grateful for help in finding a way to install the HP Solution Center after upgrade win10.  The installation CD original will not auto-run and when seteup.exe forced to run from the DVD, offers 'output' as the only item on the menu.  The HP support web site offers only the "HP Print and Scan Doctor for Windows" I have installed and tried to run several times.  Pretty frustrating.  Prints OK from normal applications, but am really struggling to analyze.  Any help appreciated.

  I have a 8610 who worked during the first weeks perfectly under windows 8.1.

  After the Win 10 update, it does not work.  The installer who "sees" the printer on the wireless network, impossible to install drivers or programs.

  Hate to say it, but I think we're out of luck until HP fixed their software.

  Very ironic because they don't have that tell of these printers are compatible with Windows 10 messages.  Technically, that's true; It is their software that isn't.

• What is the best operating system to upgrade from Vista? Should I buy Windows 7, 8 or 8.1?

  I have Vista 32 bit Home Premium.It does not support Windows Mail.Which is the best operating system to upgrade from Vista? Should I buy Windows 7, 8 or 8.1? I do not have a touch screen system, my system is five years old.

  Original title: upgrade

  Hello WilliamPopat,

  If you want to buy an another operating system, you would do better to buy the latest version, i.e., Windows 8.1 it doesn't matter that you don't have a touch screen like Windows 8.1 will work just as well on a desktop PC / laptop normal.

  However, before rushing and buying a copy of Windows 8.1, I suggest that you look at this link http://www.eightforums.com/tutorials/11885-windows-8-upgrade-assistant-download-run.html the link above shows Windows 8 Upgrade Wizard you can download (free) and allows you to check that your PC is compatible with the latest version of Windows.

  According to me, one of my office machines is around 5 or 6 years and Windows 8/8.1 works fine on it.  However, it is best to check your own machine with the wizard upgrade just in case.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com