The accident of the L50 - A satellite BIOS update

Similar Questions

• The HP Pavilion a6560z bios update

  I have a HP Pavilion a6560z. Product #: KZ851AV

  I tried to upgrade the processor of double base installed to a phenom x 4 9550, that my research shows is compatible as long as I have updated the bios. I am currently running bios version 5.14 20/06/2008. My problem is the OS original on this PC is Vista, I erased this OS and now run Win 7. I found an update of bios, version 5.49 but she said do not be there except if Vista is installed. Will install this bios brick Council since its desingned for vista?

  I can't enter the bios with the 9550 installed but it does not start in windows. The bios shows that it is a blah blah Phenom quad core, so at least he acknowledges that, but when I try to load windows it says "the file is maybe damaged. The file header checksum does not match the checksum calculated. "I read that had a memory problem and tried 8 different sticks, all with the same result, so I thought it was a bios problem. Anyway, any help on a version of bios, I can try without bricking advice would be greatly appreciated. Even if its for Vista that I am always willing to try. This pc is not much of value. Thank you.

  You are welcome.

  oldhppos wrote:
  

  Thanks for the quick response. Last question, if I could somehow reinstall Vista (system recovery is not an option) and then perform the bios update I was able to install windows 7 and then continue with the new (er) cpu?

  I checked the page download software & driver of the computer for an update of the BIOS for Vista and Vista 64-bit.  It seems not to be available.  You cannot use a retail BIOS update.  Where did you find a BIOS update?

• L50 - A - PSKK6F - BIOS update v1.9 satellite fails

  First time I had to deal with so many things to get my bios updated.
  This model never constant speed... is up and down and some hardware options not available or at par with the specifications provided.

  Sounds like a bios problem. Current BIOS v1.7.
  When I try to update using the update from Toshiba, it indicates that the program does not work with the current configuration...

  Copy the prior program.
  Please help.

  and what is the current configuration of your laptop?
  Have you changed your system?

  BIOS update (especially if its a BIOS update Windows based) requires some essential things: your special system-based Toshiba utility must be installed.

  By the way: the update of the BIOS does not improve the performance of s for laptop. Also the BIOS update adds no extra hardware options. This is why I would recommend you don't expect too much from this update of the BIOS

• Where can I get the 29CN26WW (V2.03) BIOS update for a G560?

  It is not listed on the site, & I need to update to the latest. Thanks for your help.

  I understand that I read that info, it does not help much because the v2.03 file is no longer available.

  * edit * Nevermind I was able to find the file in a strange way. Here is the link if anyone ever needs her. If you need the 32-bit version, I guess you can cancel the download, look at the URL & change to NIWEx203_x32.exe for it to work.

  NIWEx203_x64.exe

• Satellite U500 - 11G - noise of the fan speed after BIOS update

  Hello

  I have the Toshiba Satellite U500 - 11G.
  I've recently updated the BIOS because my CPU fan did not work under Ubuntu,
  But after the update, my CPU fan speed is faster then normal and make a lot of noise (even if the CPU is cool) when I use Windows 7 is still stay on fast speed making a lot of noise.

  Do we sort of degrading the BIOS or thw way to earn the slow CPU fan speed?

  Concerning
  Sagar

  Update BIOS because of Linux? You know that Linux is not possible on this laptop model?

  In any case, to reduce the fan sped Please reduce the cooling in saving settings method.
  Control Panel > Power Options > go to your preferred power plan settings and choose advanced power options > Toshiba saving settings > cooling method > set to optimized battery.

• Di Shutdown does not work, got the blue screen, beware, if it's the 1st time, etc., bios .updated .shutdown worked for awhlie, then got the same blue screen on another attempt to stop

  I had trouble with the fans so I unplugged everything, pulled out the memory and put it in. Shortly after received warning on a stop. I've updated the bios and things worked fine for one night. The following day I uninstaaled some programs and blue rebooted and got the screen again. I can right through the blue screen and sign, but have to stop with button / stop.

  Hello

  What is the exact error message on blue screen?

  This error message can point to a hardware or software that causes this problem. If the computer restarts after the Blue error screen, disable the automatic system failure restart option allows to capture the error message on blue screen.

  Check if the problem persists in safe mode and after the same return.

• XPS 15 9550 CPU speed is as low as 0.75 ghz after manually installed windows 10 with all the drivers installed and BIOS updated

  I just bought this XPS 15 9550 in January, and I really appreciate it at first.

  However, one day, as pushed microsoft update to 10586 version of windows 10 and the machine will always fail to install the update, so I decided to download the image file and install it myself.

  The installation went smooth, but after a few days use, I found the computer is very slow during playback of videos and games and I came to find the speed of the CPU shows the label of performance in the Task Manager always will be 0.75 ghz and 0.78 ghz. He cannot go above that. I also found that the use of the CPU cannot exceed 30%.

  I've already updated my BIOS to 1.1.19, reinstall the system, a few times, choose the battery mode high performance, etc and this does not help.

  I also downloaded the power of intel and found gadget for my processor power consumers are still weak and the speed of the CPU is always not 0.80 ghz.

  In addition, I encountered the problem that after plugin the AC power, the speed of the CPU will fall to 0.39 ghz...

  Someone at - it an idea of what is happening here and how can I solve the problem? I'll really appreciate it. Thank you.

  I had my problem is solved. Follow these steps:

  1. download gadget power intel, you can search online for it.

  2. check the power of your CPU (package pw...) rate and open the videos and applications that will constantly consume the CPU power. See if the power is still weak.

  3. If the power is still weak, try to update your BIOS (download dell drivers and the new version should currently be 1.1.20) and see if things are getting better.

  4. If the power is still low, you must contact dell technical service to replace your hardware (my computer has replaced the northbridge, southbridge, I forgot, but after replacing, the CPU works fine)

  Note: If you run games using your discreet graphics card, such as starcraft II and you found that it's extremely slow, it is possible that your cpu is capped.

• (Redirected) The failure of the Alienware X 51 bios update

  Hello

  I tried to update my bios version. Started with A01 and A02 and A03, then update all very well.

  When I then tried to update A03, A06 something has gone wrong. After the system is restarted, it does nothing more. No lights turn on, my screen remains black, my keyboard does not. Only sign of life is the fans making a soft noise.

  Can someone help me with what to do upon returning to life?

  Hi Jaweetikveel 123,

  Please repost this in the forum of the Alienware club for assistance.

  http://en.community.Dell.com/Owners-Club/Alienware/

• The a11 of installing bios update failed?

  I am literally pulling my hair with concern. I updated the bios to A11 on the aurora r4, I got the successful installation message and my computer off. tried to start it back and he let me only to start in safe mode, it looks like all my files are still there but he is not grateful my im drivers currently resettlement in safe mode but I am not optimistic. Help, please. as soon as possible. Thank you

  first of all, let me thank all of you who posted a suggestion. turn my computer on this afternoon and it seems to be running ok, as its fixed itsself, because I sure as hell did nothing else that the power of the drain unit after I let fall at night last. so fingers crossed the NOTE from the ADMIN: profanity removed according to the TOU > thing is ok. Thanks again for all the advice

• HP 4310SW: the 4310SW DM1 HP Bios Update. Y at - it a newer version than F28?

  Y at - it a newer version than F28?

  Hello

  Please check the Windows 8 section.

  Kind regards.

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• L50 - A satellite - state of the power supply is lit, but laptop will not start.

  Hello
  A few months ago, I bought a new Toshiba laptop L50 - A Satellite. He worked incredibly in all directions until about a week ago when it lights. He has been connected to the charger with the charging light but does not illuminate. When I press the power button, the small ring of orange around the button light turns on and will be so all the LED lights on the front of the laptop, as well as I can hear the fan and other work items, but the screen remains black. This has been the case for a little over a week now and at random, two of the times I tried to power on my laptop, he turned on and working but then after that be cut, it wouldn't work again. He has not worked since 5 days and since then I tried to turn it on.

  One of my friends who knows a thing or two suggested perhaps it was the display that was defective and should I try to connect it to my TV via a HDMI cable. This seemed logical, so I gave him a test in the hope that he'd at least let me know what was the problem, but no fixed image displayed anywhere.

  My laptop is almost always connected to the charger and an expensive cooling fan, so I guess that battery and components must still work most of the time, and I've read that this laptop is designed so that you cannot remove the battery, but I do not know how to in any case.

  I tried a few different methods to try to start it as now the Start button / stop and the ESC key for 10 seconds, now back while pressing the power button and pressing the power button while pressing F8 repeatedly. But none of them worked so far.

  If anyone has any ideas or a way to help, that would be greatly appreciated.

  Thank you, Julian.

  Hello

  The L50 - A Satellite supports a stop (hole) switch located at the bottom of the unit.

  Cell phone is freezing, do not start or has a power failure, which cannot be resolved by pressing the button for 10 seconds (force shutdown), please use stop force switch instead of the main battery.

  During a stop by pressing this button force, the behavior of the system is identical to unplug the AC adapter and remove the main battery.

  More details here:
  Stop power switch (hole) for models with one main battery sets
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  Hope this helps

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Update driver for the graphics card - Satellite P10

  Hello I use toshiba p10 and the graphics card that I use is nvidia fx go5600 a few days ago, I bought a game does to grant the minimum required but when even, I have a problem with the game so I asked in the forum of the game site, what to do and was told to update the driver (graphical) so I tried to do , but I couldn't until I discovered that I need to get the update on the toshiba site, including bios update...
  is it good? What is your latest update?
  Thank you very much
  return on investment

  Hello

  the last driver that I could find on the download page is the version 4.4.8.5

  Good bye

• Satellite S500-10F - slowed down and need BIOS update

  Hello, I would like to know if anyone can help.

  I work for a Borough Council IT Department, so it is quite safe to say that I know a fair bit on THIS and the side material things. We had an about 12 laptops Toshiba Satellite S500 delivered, 11 x S500 - 11 c and 1 x S500-10F. As we do not yet support windows 7 so he must rebuild in Windows XP, install the drivers etc, and send them to schools.

  All S500 - 11 c were built and work without any problem at all. The only difference I see is that the model 10F doesn't have bluetooth so that the model 11 c. Model 10F take image ghost, created from the 11 c, but he likes to be restart every 5 minutes approximately and is extremely slow.

  So I rebuilt the model 10F using our licenses CD XP SP3 Microsoft and started to install drivers etc. When I installed the software of card reader Ricoh the laptop again slowed down (about 5 minutes to start Windows). I used to have a similar problem with a model on the A300 range and I've updated the BIOS which cured the problem. I downloaded the one and only BIOS update on the Toshiba site for the S500 and when I want intsaller, he returned with a message that says "this computer is is not supported.

  If someone at Toshiba can tell me where I can get an update of the BIOS that works for my S500-10F or indeed why my system slowed down to a snails pace after having installed the Ricoh card reader software I would be very grateful. I removed the software and now and disabled without success card reader devices.

  Thank you very much

  Warren Poole

  I can see for this Satellite Pro model 2 drivers are available. The second is O2Micro controller version 1.1.4.207 card reader.
  Have you tried to install it?