The ACL component and folder G

Similar Questions

• I can rearrange the email component and seen to be side by side rather than stacked?

  I can rearrange the email component and seen to be side by side rather than stacked?

  What does that mean?

• I have a problem to download a Web of Muse - the following site seems to be the problem - unable to validate the specified domain is associated with the FTP server and folder. Continue nevertheless helps Adobe told me to download and extract the f

  I have a problem to download a Web of Muse - the following site seems to be the problem - unable to validate the specified domain is associated with the FTP server and folder. Still

  In Adobe help, it tells me to download and extract the ftppefs.xml file - it's supposed to be found in the Mac/Library/Preferences/Adobe/Adobe Muse CC/20141 and paste this folder GO.

  I checked this place and there is no file. I have re-installed Muse but preference file doesn't show up - where I can get it?

  Daryl

  Please check the used domain in the domain and the server is entered, it can be the reason for the absence of the field.

  Thank you

  Sanjit

• Need a Clarification on the installed component and run Simulator Configuration

  Help!

  I need clarification on what the plugin Eclipse is telling me. There are two parameters that are confusing me. For components installed (found under preferences/Window/BlackBerry JDE/Installed Components), I have a choice of 5.0.0 4.7.0,4.6.1, 4.6.0 4.5.0 and 4.3.0.

  Depending on which component I select when I go in the tab Configurations.../Simulator/course walk, I see a different mix of devices.  In all cases, there is a default Simulator.

  Initially, I assumed that each JDE component supports a mixture of different devices, and that is it compiled correctly, I would be assured that the app would work for all devices on the tab run Simulator Configuration.  In my tests, I found theopposite.  I also assume that, for each component of the JDE, there is a 'default' Simulator that was representative of all devices in the drop-down list run Configuration Simulator.  In my tests, am not sure what actually represents the Simulator 'by default'.

  Can someone clarify how to JDE and Configuration simulators run installed interact and a developer show how to ensure that their application is running on a mix of devices?

  When I finally get to the point where I am ready to deliver, what are the points of decision of installation?  Is it enough to simply require a specific version of an operating system (for example 4.7?) or do I have to create a grid and check the two model number and version of the operating system?

  Thanks for your help.

  "currentT shipping Curve 8330 come with OS 4.5" - they must be, as far as the carrier released a version 4.5.

  "Your statement that most consumers do not upgrade surprised me too" - only I support!  You might get a different opinion of someone else.  But the question is why would?  And our world app downloads indicate that he is did not upgraded phones out there.

  "I guess you are right in this assumption of statementI you are right in this statement"

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/What_Is...

  "If there is some Curve 8330 there running 4.5 OS, it's a configuration supported." - correct

  "Construction of the 4.3 OS will be one where the menu appears in the upper right and the built 4.5 OS will be one where the menu is out."  Sounds good

• Inspiron 3452: free space via the removal of the apps.ppkg and folder C:\Recovery?

  On my Inspiron 3452, I could remove C:\Recovery to increase disk space, with ill effects in operation.  I felt if I need to reinstall windows, the USB thumbdrive backup I created was enough.

  This folder contains the "Apps.ppkg" package file in the subfolder of customizations of provisioning, size 3 575 529 KB.  I saved the C:\Recovery to a USB key, just in case I wanted to restore it.

  Well, I don't have reinstall it from the USB.  Now I find when I try to delete the folder C:\Recovery, I can't do it because of the Apps.ppkg 'used by the system.  When I did go to a command line in the recovery WRE environment, I lost the Bluetooth FTP device icon in 'This PC', which became a white icon and was not functional.  It seems that the content of the file is now used by Win 10 'live '.

  Copy the file to the computer and rebooting makes the back icon.  I'm not investigating any other ill effects.

  My question is: is it possible to isolate the apps.ppkg of using the OS file and delete it in order to release once more space on the 32 GB without sequela MEM?

  I used this:

  1 make a recovery disk

  2. start in recovery drive

  3. Select command line

  4 navigate in C: drive

  5 Del apps.ppkg

  I have not seen a negative effect (yet). If I do, I have the recovery disk.

  I hope this helps.

• The tree component and ADF area Refresh

  Hello

  I am a newbie to the world of the ADF. I want to talk about 'Request for debit ADF task of Summit' and try to build similar ask and I am stuck at the initial stage.

  (1) I have an index.jsf that has a component in the tree (country-> client) and index page has a region pointing to the stubborn workflow called "clients-task-flow '.

  (2) the limited workflow has a page called customers.jsff fragment, my requirement is when I navigate through different customers in the tree of my data in customers.jsff must display that customer data (should freshen up).

  As far as I know, it must use the partial release on customers.jsff, but Summit application has no trigger of partial. I also created a link between the client and the entities of the country.

  Can you please help with this.

  Thank you
  Rajesh

  I finally found how to solve this problem using accessor and object tree EL Expression to update the CustomerIterator.  The bulk of the ADF helped me thereby: ADF Insider Essentials

• VMRC permissions Voodoo - limitation of the ad group and folder VM-based Console access

  We are allowing access to their virtual machine using VMRC console administrators. Our Unix administrators get access to their virtual machines and the same Windows administrators, but they should not be able to access each of the other consoles.

  We have implemented a 'VMRC Console' role and allowed only 'Interaction of virtual Interaction/Console machine' for this role. When we apply this role to the user group AD for Unix (for example) administrators on the ESXi host objects, they are not able to connect unless we put the option spread. When we do this, they now have access to all THE consoles, not just them.  As soon as uncheck us spread it, they can see their VM once again, but cannot access the console.

  What is the secret sauce here to limit them to their own consoles? I can see why this is happening, but I was hoping that the VM folder permissions would have limited their access. Apparently the host permissions override the VM folder permissions (and this is not surprising, really).

  There is currently no provision for limiting access to a single console you want. Work is ongoing at this address in a future version with changes in vSphere, ESXi/etc. and VMRC.

• I do not see the extracted component and my sign in option is grayed out.

  Help.

  You have an older version of the PCOC, before the window of the extract has been added.

  Go to help > about Dreamweaver to see your installed version.

  There are 4 versions available via CC desktop app, you can have DWCS6, CUPC, CBWMS 20141 and PRAB 2015.2 all installed under a single subscription on the same machine. If I remember correctly, the window of the extract has been added in 2015 of CC.

  When you install the new version of the program, do not forget to uncheck an option to remove older versions and you will be able to continue to work than you are used to, while appearing on the news/removed features of latest version.

• When I try to upload to the FTP server, it says "cannot validate the specified domain is associated with the FTP server and folder Still? "I confirmed with my FTP host and it's alright on this effect. Help, please.

  @@

  Have you tried the jams of the topic resources. You can browse past records, I'm sure I saw a download to the host. Good luck, lets know if get you sorted.

• Windows Installer cannot find the Destination component

  After wash starts the Windows Installer window if poster once finished top of desktop. The process takes about a minute. Windows Installer message is, "Preparation for installation." Then, the Destination component appears with message "Please wait while Windows configures the destination component", and shows the progress bar. Then, the Destination component window appears with the message, "an installation package to the Destination of the product component is not found. Try the installation again using a valid copy of the installation package, "Destination. msi´."

  This package is not in my computer. This happens everytime I turn on the computer. The whole process is very long. How can I fix it so that the message?

  Thank you for your help.

  Hi lmcrae,

  Put your computer in a clean boot configuration to determine which product is responsible for this. Clean boot is a way convenient, safer to change the options for startup in the registry; You can turn individual items or disable freely to try various combinations up to that narrow you the problem. Once you find out, post details about the same so that we can take additional measures.

  Please see this article for detailed information on how to do it.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to set a partialTriggers for the declarative component

  12.1.3 jdev

  I try to set partialTriggers for my component declarative.

  From another forum, people suggested using one different name other than partialTriggers to avoid override a final method in RichDeclarativeComponent.

  Then, I set this:

  < afc:attribute >

  < afc:attribute - name > myPartialTriggers < / afc:attribute - name >

  < afc:attribute - class > java.lang.String [] < / afc:attribute - class >

  < / afc:attribute >

  and

  "< af:selectOneChoice id = simple =" #{attrs.simple "dc_droplist_soc"} "readOnly =" #{attrs.readOnly} "disabled =" #{attrs.disabled} ' "

  value = "#{uploading." "Value}" label = "#{attrs.label}" binding = "#{dropListComp.selectOneChoice}".

  "autoSubmit =" #{attrs.autoSubmit} "required =" #{attrs.required} "visible =" #{attrs.visible} ' "

  valueChangeListener = "#{dropListComp.handleValueChangeListener} '"

  partialTriggers = "#{attrs.myPartialTriggers} ' / >"

  But it does not work. I don't see a partialTriggers work.

  Any suggestions?

  Thank you.

  Hello

  try to use PartialTrigger on the declarative component and then reference it from

  partialTriggers = ' #{uploading. '. PartialTriggers}' / >

  Frank

• How to change the position of the scrollbar component combobox

  Hello

  I would like to change the position of the scroll bar in a drop-down list on the right to the left box.

  Please advice.

  Thank you

  Yair Papo

  You can use the dropdown combobox property ' to reference the list component and then use the list component verticalScrollBar property to reference the scrollbar control.

  you will probably need to use the move() method to change its position rather than assign x, y properties and you will probably need to wait until the rendering is complete before attempting to assign its position.

• The overview/poster set for the flvplayback component

  I have been customizing the flvplayback component and have encountered a problem. So far, I created a custom look for the flvplayback component, with a play overlay button that loads the FLV file dynamically from flashvars successfully. Now, I'm trying to load in a static image that takes until the video is played. I look around the internet and in the Adobe forums, but have not found what I'm looking for. I thought that maybe the preview in the AS3 flvplayback component would help, but it won't apparently.
  
  I was thinking myPlayer.source = "image.jpg"; but then how to change what is the source, once someone clicks on the video? I also found fl.video.VideoEvent, but I don't know how I can use this to set the image as a source, so that someone presses the play button, or until the video plays (notice that I use a play button on overlay that appears whenever the movie is paused, so once the video starts to play (, I would not want the static preview image to find once again... until someone clicks the play button of any kind)
  
  Ideas or meanings is greatly appreciated.
  
  I joined code how I am dynamically loading the FLV right now.

  The preview of the component FLVPlayback-is only a placeholder for design - which will not get exported in the final swf file unfortunately. The class itself does not posterframe features. What you need to do is to load your posterframe using the class loader as:

  var pfContainer:MovieClip = new MovieClip();
  addChild (pfContainer);
  var pf:Loader = new Loader();
  PF. Load (new URLRequest ('posterframe.jpg');
  pfContainer.addChild (pf);

  Next, you need to define an EventListener to your FLVPlayback instance that removes the Posterframe when the video starts to play:

  myPlayback.addEventListener (VideoEvent.PLAYING_STATE_ENTERED, removePF);
  {removePF(e:Event):void}
  removeChild (pfContainer);
  }

  If you want to have the Posterframe reappear on break, you could hide the pf instead of remove and set up a second EventListener for VideoEvent.PAUSED_STATE_ENTERED.

• Foxfire (last) it replace my foxfire with pencile and even paper icon in the Mac os applications folder

  Downloaded the latest Foxfire or os on Mac and restarted. Foxfire icon has been replaced by a note pad pencil and the sovereign, went to the applications and it is also! I love my fox and I not want to go back! Thank you

  Try to download a new copy of the Firefox application and save the file to disk on the desktop image

  • Firefox 39.0: https://www.mozilla.org/en-US/firefox/all/
  • Basket of the current application of Firefox (open the Applications folder in Finder and drag the Firefox application to the trash) to do a cleanup (re) install
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install or update Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• When I open Thunderbird it shows download 1 of 27 messages, but only downloads one 1 and stops, I then mark as spam and delete it from the junk e-mail folder

  When I open Thunderbird it shows download 1 of 27 messages, but only downloads one 1 and does not download the other 26. I mark as spam and delete it from the junk e-mail folder. I press the button to get the Messages and the same thing happens again with the same message that was deleted before downloads and other 26 messages fail to download. How can I get rid of this email and download the rest of my emails?

  What is a POP account? Please confirm.