Windows 7 will not install (unexpected error)
I'm trying to install Windows 7 using the installation disk on a Dell desktop computer that is a few years old. During the process, he said the computer restarted unexpectedly or encountered an unexpected error and the installation cannot continue. I have a couple of blank disks, but Windows still refuses to install. The diagnosis of BIOS has detected something wrong and I ran the extended memory test.
If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.
If you have more than one internal hard drive attached, disconnect all except the disk target hard where Windows 7 is installed.
Tags: Windows
Similar Questions
-
SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!
=================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-10-24 12:36Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
(f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mumControl components store
Summary:
Seconds executed: 1241
Found 4 errors
CBS MUM lack count: 4Unavailable repair files:
servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.catHello Yiratr,
Thank you for using the Microsoft answers Forums.
Solution:
Follow the steps in the web link below.
http://support.Microsoft.com/kb/956702
That should do the trick for you.
Thank you.
Kind regards
Augustine.
"URGO".
UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO
-
my windows updates will not install error d 000737
my windows updates will not install error d 000737
Please visit: How to reset the Windows Update components? Carey Frisch
-
Windows Update will not install, I get message 0.800700005.
Windows Update will not install, I get message 0.800700005. I'm not available updates when I shut down my computer and cannot access Internet Options in the Tools menu of WE. Computer works well but no updates or the Option settings. Help
Hello
1 update you are trying to install?
2. don't you make changes on the computer before the show?Method 1:
Run the fix it and check.
http://support.Microsoft.com/mats/windows_update/Method 2:
Try the procedure described in the supplied knowledge base article and check.
Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
http://support.Microsoft.com/kb/968003Method 3:
You can try the steps and check if you are able to install the update.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798Registry warning:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry -
OUT will not install because Error 1324, path has invalid character?
OUT will not install because Error 1324, path has invalid character?
Seems to be a problem bit common (per google search) for Adobe and Microsoft programs, but nothing on OUT...
Everything I tried (Google had suggestions) did not work.
I suspect that the Setup program tries to install an invalid path but I can't find it in the registry or understand why the error. The program was previously installed and functional, but after having some problems, I have tried to re - install and find myself here!
Any help is greatly appreciated.
Pavilllion HP dv6700 Laptop
Intel Core2Duo T5450
Vista 32 bit
Solved!
It seems previous version could not be uninstalled because of the invalid path {somehow over time windows had reassigned drive letters such as the former location of installation on external hard drive F: (as in the registry), was now pointing to the DVD drive f: and I guess generated Error 1324, path has incorrect character}.
Used Revo Uninstaller to erase all traces of the old installation and 'voila', new facility OUT proceeded successfully.
Hope this helps others with this error code.
-
Windows Update will not install downloaded updates.
Win 7 pro x 64
AVG AV worm: 9.0.869
Zone Alarm Pro ver: 9.3.014.000
Malwarebytes worm: 1.46
SpyBot S & D worm: 1.6.2
Ad-Aware Free (2010)
This is my first post on this forum so excuse all the errors in the placement of the info.
WU, MU will not install the updates downloaded or optional updates selected. No error code is given, it remains at 0% for as long I leave or I cancel installation. I tried to install individually in MS catalogue still will not be installed. This is a new computer that I built in July and punishment, it has not been used. It's strange because for the first three weeks of this computer, I had no problem with the installation of all available updates, or anything else. Then when the updates of August were available I chose all security updates and install optional updates that have already downloaded click on the button and nothing happened, it remained only on 0%. My question is, is there an update that was given earlier that caused these updates not installed? I really want to use my new computer, but I don't like to run without new security and the latest updates. I had trouble before what do.
I used all the security software listed above on all my computers for about 5 to 10 years and non of them are set to prevent windows update from working.
Please try another attempt to update, y d diddty. During the update installation fails again, close Windows Update.
Open the WindowsUpdate.log and copy & paste in at least the last 50 lines or so, in your response, please.
How to read the Windowsupdate.log fileMeanwhile, suggest to configure Windows 7 to the clean boot and see if he can install updates in the clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7NOTE: in the Clean boot state ZoneAlarm will be disabled. Make sure that the native Win 7 firewall is now on in the Panel.
While in the clean boot state, you can also try to download and Save the Fixit found here -How to reset the Windows Update components?
Once the download completes close all open programs and browsers.
Now launch Microsoft Fixit 50202.msi and choose the default mode.
When it has finished turn the system reboot to clean it from same start State and see if updates can install now.If no joy, run the Fixit once more and choose aggressive mode.
Then restart on the same State of clean boot and see if update succeeds now.Expert MowGreen Windows IT Pro - consumer safety
-
Original title: it seems that since the installation of a second drive hard, PC will not install updates. They continue to fail.
HP pc running windows 7 Home premium. error code 80070011
Hello
· What updates you are trying to install on the system?
· What is an update of the application or a Windows update that you are trying to run?
· If it is an update of the application, where the application, first hard disk is installed or the second drive?
Error 0 X 80070011 occurs when you try to update any application which is not present in the location.
For more details, see the article mentioned below.
Error: ERROR_NOT_SAME_DEVICE (0 x 80070011)
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hello
I am trying to configure a newly purchased office of Acer (Aspire ACX - 603 G-UW31), who has installed Windows 8.1, for my mother who cannot grasp the steep learning curve of Windows 7 to Windows 8.
I have a licensed copy of Windows 7 x 64 on DVD, and even after the SecureBoot mode off then launch MSC forever and then starting with F12, by selecting the DVD drive as a boot device, Windows will not install correctly.
The very first steps of the configuration are very well, it is, I'm asking the press actually starts to any key to boot from the DVD, Windows Setup loads some files, but the problem comes when the installation of Windows. I get a STOP error to the ASF with the message "The BIOS in this system is not fully complaint ACPI." There is no BIOS update for this model. That's the traditional way...
Any ideas?
Thank you, Nick
All,
I would like to announce, we have released an update of the BIOS that supports the element of 'Throw the CSM' in the BIOS Setup menu. Please visit http://www.acer.com/worldwide/ -> select your region-> click Support-> drivers and manuals-> select your product and then download the version of BIOS released on 15/09/2014 (or later version).
Please be aware due to material limitations when MCS-mode you may experience some audio issues HDMI.
-
Trying to upgrade Snow Leopard to El Capitan. El Capitan will not install. Get the error message "failed to file system verify or repair. Quit the installer to restart your computer and try again. "After Setup could not restart without using the Snow Leopard disc (then to download all updates for Snow Leopard). I tried reinstall and same results. (in fact made three times) I'm back to Snow Leopard 10.6.8... Any ideas what is happening.
Dealing with the corrupt downloaded in OS X
Dealing with the corrupt downloaded on OS X (2)
Download Mavericks cannot be verified also applies to Yosemite.
-
KB2249857 Windows Update does not install with error code 800706BE
Hello
On October 28, Windows Update has identified 3 updates to be installed (KB2388210, Ko 2284742 & 2249857 KB) which caused my PC hang on reboot (stuck to the ' install updates...) 1 screen 3).
Since then, I managed to install 2 of the 3 (KN2388210 & KB2284742) successfully by individually selecting in Windows Update but the KB2249857 update will not install and now whenever the PC stops it hangs while trying to install this update and needs a "hard reset" (that is, hold the power button) to recover up to.
I've seen a few posts on problems with this update, but no definitive answer or resolutions. Any ideas?
Thank you!
MARWOOD,
http://support.Microsoft.com/kb/555375 >
It helps those answering questions if you provide:
What version of windows (32-bit or 64-bit) and service pack level.
What application or antivirus security suite is installed and your current subscription?
What third-party firewall
What anti-malware software can be installed.
0x800706be RPC_S_CALL_FAILED http://support.microsoft.com/kb/950718/>
Run the update http://support.microsoft.com/kb/947821system tool >
-
Office 2007 SP2 on Windows 7 will not install
Recently upgraded from Vista to Windows 7. After that, a lot of problems to do Office 2003 and 2007 to play nice. Finish by uninstalling and reinstalling both. Now, applications seem to be happy, except for Word 2003 AND 2007, eager to relocate whenever they are launched. The biggest problem now is that the Office SP2 will not install. Tried registry cleaning, download .exe standalone and as an administrator and also using the tool PatchRegCleanup - x 86 .exe (which gives me a message "productcode must be determined" and makes me want to go out). Yes, Office 2007 disk is inserted. All other updates installed correctly. Any help appreciated.
It worked for me: http://support.microsoft.com/kb/971058. Thanks SpiritX and t. guenoun
-
KB2686509 security update will not install 0xf0f4 error code
After downloading Microsoft security update for Windows XP (KB2686509) update will not install - what should I do?
I struggled with this for days. Here's what was going on and what I did that worked.
faultykeyboard.log listed 24 entries of the form kb*.kbd
I searched and no such files exist on my computer.
By running regedit and looking, I found 24 subkeys appearance abnormal corresponding to the list in:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Keyboard Layouts
After carefully reviewing the risk of damage, I discovered that the operating system automatically restore this section of the registry in the event of a boot failure.
I deleted then boldly all subkeys of the *.kbd type in the registry. I deleted faultykeyboard.log. I rebooted then ran the KB2686509 update and installed and restarted the computer.
The problem disappeared. Everything works.
-
Original title: my "Windows Installer is not installed properly.
I can't update my XP computer because my "Windows Installer is not installed properly. All facilities Microsoft Update failed (code Ox641). I wouldn't change anything. Help!
Hi Mark,
Did you do any hardware changes or software on your computer before this problem?
You can follow this link & check if the problem persists:
Because of Windows Installer, you can follow this link & check if the problem persists:
Error message "Could access the Windows Installer Service" when you install the application
Hope the helps of information.
-
Windows 7 will not install PNY 1 GB flash drive. (who has worked in the past)
When I tried to use my flash drives today that they do not work. When I go to Device Manager it says the driver is not digitally signed. (It's the Microsoft supplied driver). I tried the update and find a driver who says that it is digitally signed, but when I try to update it will not install because it is not digitally signed. Help!
Hello
1 what other readers USB not detected on the computer?
2. don't you make changes to the computer before the show?Method 1: I suggest you try the steps from the following link:
Tips for solving problems with USB devices (applies to Windows 7)
http://Windows.Microsoft.com/en-HK/Windows-Vista/tips-for-solving-problems-with-USB-devicesMethod 2: Also I suggest you to update the chipset drivers.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly -
Help
Tracey,
http://support.Microsoft.com/kb/555375
You can watch the following article to see if this will help with the error 643.
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643
http://support.Microsoft.com/kb/946414
During the installation of .net Framework updates with Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
http://support.Microsoft.com/kb/976982>If no joy, of the article in the Knowledge Base for ALL the .NET security updates:
"How to get help and support for this security update
For home, users visit Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
For enterprise customers, support for security updates is available through your usual support contacts. "
Let us know if this helped.
Maybe you are looking for
-
Hello For now, I have a small question... Can you please tell how the call load work or rates for a local to the Japan with a mobile service to call my new Skype number? Thank you Toro
-
Unable to connect via wifi Web after that windows update 8.1
Laptop HP Pavilion 15 pc 15 n032sa-update to windows 8.1 but now unable to connect to Internet with wifi I have to use the yellow cable.
-
"Data was overwritten before it can be read by the system" count with PCI 6601 with 20 MHz clock
-
3055A - Win 7 wireless connection fails
Having bought a new printer 3055A few days ago I am facing a problem, I can not solve: whenever the cumputer is stopped and restarted it loses the connection to the printer. The connection between the printer and the router seems well, but the printe
-
I have a new windows 7 pro system which has been configured to host a remote desktop connection. There are 1 user account (active admin), the port number was changed from 3389 and I think that the firewall is disabled (it's Norton Internet Security