the ACS 5.1 stopped authentication logs after restart!

Similar Questions

• Printer not print indicating the print spooler is stopped and does not restart

  Original title: printer does not print

  The print spooler is stopped and does not restart. I have a laptop with Windows 7 and the printer is a HP Officejet 8600 (network). My wife has the same laptop model and has no problem with printing. Any help you can give would be welcome.

  David Torres

  Hi David,

  Thanks for posting your question in the Microsoft Community.

  I understand that this printer not print indicating the print spooler is stopped and does not restart. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  . Have you made any recent hardware or software changes to your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Step 1:

  Run the Microsoft Fix It from the link below.

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Step 2:

  Follow the steps in the link below.

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  You need to check if the Printer Spooler service is started from services.msc.

  a. click Start, click run, type services.msc.
  b. double-click the print spooler and verify that the status is set as Automatic or Manual.

  c. right-click on print spooler and click restart.

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  I followed method 2 above. When I Rt click Spooler printer restart remained gray when I click on START, I get the message "Windows failed to start the service on local computer print spooler.   ERROR 1053 the service did not demand launch or timely control.
  What can I please?

• The SX20 language setting cannot be saved after restarting the device.

  Hello world

  Anyone encountered below the question before?

  I have a SX 20 with the TC7.1.4 software, when I change the default language to another, it will work, but after restarting, the automatic restore of the default language. I have tried the factory reset, but this isn't a job.

  Can someone help me? Thanks in advance!

  Billy

  How did did you deploy the device (CUCM, VCS, TMS,...)?

  Have you tried to reboot the device without the network that is attached to it?

  I wonder if CUCM or TMS reset your language, have you checked the parameters / models here?

  What languages do you speak? Have you tried to update to TC7.3?

• 4.1 of the ACS and Windows AD authentication

  Hi all

  I want to install an ACS, 1113 and will authenticate users through AD.

  It is preferable to install the remote agent on a domain controller or a member server? What are the Pro and cons

  Thank you

  Randall

  Randall,

  You can install it on the DC and the Member Server. My suggestion would be to install on a member for this domain controller server use its resources for activities in the field.

  Kind regards

  ~ JG

  Note the useful messages

• The desktop icons back to large size after restart

  Original title: I change my icons on the desktop to "small". When I restart, they return to 'medium '. I can't stay on the small adjustment.

  SP1 Win7 x 64 Pro

  Hello

  1 did you do changes on the computer before the show?

  2 have you installed a software associated with office themes?

  Method 1:

  Themes control the appearance. With themes, you can change the appearance of the desktop and the appearance of the icons.

  We will try different themes and check the status of the issue.

  To change the theme, check out the site mentioned below:

  Change the theme to improve performance

  http://windows.microsoft.com/en-us/windows7/Change-the-theme-to-improve-performance.

   

  Method 2: Safe Mode

  See the following site:

  Start your computer in safe mode

  http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode.

   

  Method 3: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-us/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• PC separations with 0xc01a001d after restarting the installation of SP1

  Help please! I installed Vista service pack 1 last nyt via windows update and after installation to restart received the following message;

  PC stops with 0xc01a001d after restarting the installation of SP1... system proven recovery and system restore but nothing helped! I am now reinstall visat using the recovery CD, but will have lost all the data, not great! Why has this happened? I am now very reluctant to reinstall SP1 don't want another weekend busy trying to re-vive my laptop!

  Please advise...

  Thank you!

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Firefox unresponsive after restarting my computer after having made changes in the settings of the history and cookies

  I have some changes to cookies and erased my story for today... and then restarted my computer... now that firefox does not open... will not respond... should I uninstall firefox and then reinstall?

  If I uninstall firefox will be reversed the changes I made with cookies and my story?

  If I was to uninstall and reinstall firefox will lose my bookmarks if I do this? or firefox remembers them... so when I reinstall the previous bookmark is too reinstalled?

  Is - this Firefox starts when you open first after the computer restarts, but crashes the next time that you try to start? If Yes, then there is a bug in Firefox 29 where Firefox crashes out when the parameter ' delete history closing Firefox "is selected, so that you get an error" running but not responding do not "next time you ttry to launch. In this case, end the firefox.exe process in Windows Task Manager (or restart the computer) and then reset your Firefox Privacy options and UNCHECK the option «Clear history of Firefox closing» See this article for more details:
  Privacy, historical settings of navigation and-no-track

  If this isn't the problem and Firefox still open even after restarting the computer, then try to boot mode safe of Firefox by holding down the SHIFT key when you start Firefox. If Firefox starts then read Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to narrow down the cause.

• How to activate the LCD in Satellite C850-B374 sensor after the BIOS update?

  Hi, friends

  I m currently a customer satisfied with Toshiba since April 2013. I've been using laptops since 2007 after using different brands, I found Toshiba to be good.

  I recently updated the Bios from 6.0 to 6.50 of the Toshiba service station.
  Update was successful and the computer works fine.

  But after restarting the LCD sensor that activates the power button in this model of laptop does not work. After entering the utility parameter that I came to know that CE of bios version is 6 and bios version 6.50 so how to activate the sensor lcd start automatically while I open the lcd screen

  Ashik

  > How to activate the sensor lcd start automatically while I open the lcd screen

  You want to start Notepad by opening the cover. Right?
  In this case you should enable the option in the system of Windows 8 settings

  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  "You need to find the option called: + open Panel - Power On" feature.
  This option must be enabled in order to automatically start the computer when the display lid is opened

• After restart some apps not full screen more

  Hello

  Why did after a reboot and by selecting the check box which says reopened windows after restart open before restarting applications are open, but many of them have lost being mode full screen, even if they were before the reboot.  Any ideas?

  A reboot opens only the previous windows in the default position, not full-screen.

  Control-command + F after reboot will change the view Mode to full screen.

• Whenever the system is booted it shutsdown and the BSOD right before seeing the screen Ctrl Alt Del to log on. STOP: 0 X 05001210 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000)

  Original title: Stop: 0 x 05001210

  On a Toshiba Portege M700 with Windows XP, I get a BSOD with the following:

  STOP: 0 X 05001210 (0 X 00000000, 0 X 00000000, 0X00000000, 0X00000000)

  There is no further information on what happened, it just says: a problem has been detected and windows has shut down to prevent damage to your computer.

  I don't know any specs on the system (processor, memory, ect) I was given this laptop from edge of my guy on the ground.  I searched and I can't find any info on this Stop error message.  It was not a new hardware or software installed on the laptop recently, other than a possible update of Windows, I'm not sure.

  Whenever the system is booted it shutsdown and the BSOD right before seeing the screen Ctrl Alt Del to log on.  I tried the Safe Mode, Mode safe mode with network and command prompt.  Each instance you get to the log in window, but when after entering my info and loggging stop immediately with the same BSOD.  I also tried the last good Config known with no luck.

  Also, the hard drive is encrypted so I can just shoot and get a backup of it before you try to reinstall the operating system.  I have not tried to repair windows, yet, I'm waiting to try other solutions if they are there.

  If anyone can point me in the right direction I would really appreciate it.  If you need any other information, just ask and I'll give you everything I can.

  Hello Jordan,.

  Have you been able to get into the recovery console?

  If so, I would recommend running the CHKDSK command of it followed by the Enter key:

  CHKDSK C:/P

  Let us know.

  Best regards

  Matthew_Ha

• delete the archive logs after cold backup?

  Hi all
  my database is in archivelog mode, I do COLD backup every night, can I just remove the archive logs after I do my cold backup, because there is no need of them, as the closed DB should have all the info in the archived papers
  
  and archive connected is needed only during the day, if a sudden power outage that happened.
  
  Thank you very much

  The ArchiveLogs allow you RollForward a backup restored to a specific point in time.

  Assuming that stop you your database at 23:00 (2300) every night and backup up to 11 h 45 (2345) tracks...

  Significant transactions entered between 15:00 and 16:00 on Friday, but a person deleted by mistake the lines (or some other lines) at 17:00

  your current backup strategy of "restoration" of the database only allows 23:00 Thursday night. If you also back up your archivelogs (in this case, the backup of Friday night would the archivelogs), you restore Thursday night backup 'cold' and "rollforward" by publishing a RECOVER database with the HELP of BACKUP CONTROLFILE until 16:00 Friday.

• Mac stops do not after the update of the sierra

  I've updated my MacBook Air (13 inches early 2015) to Sierra. After the update, it is not shut down or restart. If I click on stop, my screen goes black and the keyboard backlight is on. The judgment never ends. Its the same case on reboot too.

  Help, please. Thank you.

  Although this will help, but I have also reported this problem, like many other people:

  MacBook Air shutdown correctly

  macOS Sierra presents a serious problem that must be dealt with quickly

  Apple should give a direct response to this because it is obviously not an isolated incident.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• On Windows 8, some widgets, such as the menu near the upper right button, stop working after awhile, and restored by restarting the PC.

  I use the latest versions of Firefox as soon as they are available on a PC in Windows 8. Firefox works fine, usually a few hours before the annoying problems manifest. The problem, that I address here is some widgets, including some widgets Firefox and widgets (such as buttons and selectors menu drop down) isolated in some sites stop functioning. In Firefox, the Menu button (the icon of three dashes stacked) stops working. And the download arrow sometimes stops working too. Sometimes, sub-items as printed stop working. A pull-down, the high and arrow down keys could still work even if I might now be able to select with the mouse. Closing and re-opening Firefox usually restores some functionality. However, I usually have to restart the PC to restore all the functions that has stopped working. So I'm good for usually a few hours yet. Another inconvenience, which others have addressed, is the appearance of Chinese characters - to research on the tab toolbar labels at the top. Restart Firefox gets rid of these for the moment. Thanks for the study.

  Philipp,
  Thanks for the quick reply and for the advice that you have presented.
  I downloaded and installed the graphics driver that you recommended. The process went well. I have hardware acceleration disabled by an earlier recommendation to remove these Oriental characters.
  After two days of problem apparently having been fixed, I considered replying to report success. But before I could get around to doing so, abnormal behaviors reappeared. Thanks for confirming the source of these Oriental characters. Previous research indicates that the source was with McAfee or Firefox, a bit like a battle for "pointing the finger" in between.
  Best,
  JRSTOUDT

• I get the message "firefox has stopped working" after closing browser

  Hello.

  My problem is that when I close the FireFox browser, I get the message "FireFox has stopped working". It's pretty boring. I have read some other posts here that describes a similar problem and we tried some of the suggestions in them including:

  A clean install, a reset of the browser, running in safe mode, uncheck hardware acceleration, disabling Extensions and plugins one at a time, uninstall my antivirus (avast), backward to 23.01 and audit version run in compatibility mode that someone claims to be helped. None of this has been effective.

  It seems that after a reboot of the computer, the browser will be ok for 2-4 closures and then it will start by the message at each end. In addition, after uninstalling avast was good for 6 closures. Roll back also gave me approximately 6 free message closures. But then, the messages and does not stop.

  Is there anything else I can try? Thanks in advance for your suggestions.