myDAQ - output multiple analog/audio

Similar Questions

• Capture Analog Audio Cassette on Qosmio player

  G163 manual indicates that the SVHS-IN should be used to capture the audio analogue. But same Belkin do not sell a SVHS cable with two RCA plugs / mini-prises on the other end. Or is it safe to the output of a speaker port extension cassette player for entry into the microphone port.

  But which could overload the circuits if the volume is too high. I have the audacity to make the real analog - digital conversion and capture. I am amazed that this a portable Hi-Spec (and expensive) does not come with something as simple as an analog audio line-in port.

  Thank you very much.

  1. you get easily no matter what audio through audio red and white composite input(red-white-yell0w) provided and yellow video.

  2. video (not SVHS) is for video only (image), it cannot carry audio!

  3.I have used windvd creator and the above to convert ALL my VHS and SVHS tapes on DVD with audio and audio video and even dubbed through the input mic for more than a year now (best video with SVIDEO and you must still connect to an audio input to the unit)
  Qosmio comes with a variety of composite video input s video and the split left and right audio inpur with minijack adapter (marked triple minijack)

  Enjoy

• read the multiple analog inputs at the same time

  Hi all

  I use USB-6001 and want to develop an application to multiple tasks in C++. I try to read several analog inputs at the same time, but got some errors. To put it simply, I copy one of the sample code to read in analog data in a channel, and then turn it into function. Then I call this function to thread with the names of different poles (for example Dev1/ai0, Dev1/ai1) and I come across this error:

  "The specified source is reserved. The operation can not be specified such complete"code of State-50103

  I have search the forums, this may be because I use the hardware timing in this function, and this material timing cannot be used simultaneously by multiple tasks. I may have to put all the lines, I want to read in a single task (such as Dev1 / ai0:1). This way I can read two lines at the same time. However, when I try this, I encounter another error:

  Status code "buffer is too small to contain the data read" - 200299

  So here is my question, what should I do if I don't want to read the multiple analog inputs at the same time? Is the thing that hard time cannot be used by several true task? If I have to read several lines to a single task, how to set the settings?

  
  

• How do I turn on/off outputs multiples with a single button using USB-6501 & Labview 2010

  I've written a VI with 24 buttons, one for each output of the USB-6501, for turning on and off 24 relay.  Now, I want to add more buttons that activate and deactivate the outputs multiple.  We will call these Presets buttons and pressing the Preset button a few outings turn and some turn off.  Get it?  The VI I've included a screen shot is used to test a transmission controller and rather than to manually select one at a time relay I want a preset button that sets up instantly relays for the next stage of the event.

  The VI I wrote uses tasks created in NI MAX.

  I am a beginner of Labview, so please try to keep your easy to understand solutions if possible.

  Thank you

  Kevin

  BTW, I'm registered in Core 1 and 2 month next to Richardson, Texas.

  Here's an example - you will learn about the grapes, berries, events, etc., in the class, but this will give you a head start. Code is attached but I took a screenshot to give people an idea of how simple the schema becomes:

  

  As your learn about them, I suggest you also make the cluster a TypeDef and make management mistakes, but I've omitted the example to keep things as simple as I could.

  Good luck, LabVIEW learning, it is worth!

  ~ Simon

• Digital input to Toshiba 46TL-> no analog audio output to amplifier

  Hi all

  When I connect a video source (e.g. computer laptop via DLNA) to my 46TL, output TV audio analog (red/white taken connected to an amplifier) does not work.

  It does, however, watching television.

  Is it possible to configure the TV to read the audio data from digital input (HDMI/DLNA) to the analog output?

  Thank you for the help

  Not quite what series of TLxxx you have, but for example the TL938 supports a digital (optical) audio output port that provides a digital audio signal.
  Why n t connect the amplifier to the TV using this Jack?

  Connectors for component video / audio to the rear of the TV are the ports of ENTRY and not the OUTPUT ports. So, you can send an audio signal to the TV and not the amplifier output.

• analog audio output and digital optical

  I just bought a 500-214 with IDT High Def Audio CODEC Pavilion / DTS Sound +.

  Is it possible to get opitcal of audio output digital and analog (speakers/headphones) at the same time?  Stereo amp needs access both to the multizone/source function.  I can manually choose one or the other before the reading - it is clumsy that when audio of of active switching devices will turn off, but a passage to not always light up.  But I really need both active simultaneously for amp work properly.  I also found jack rear speaker to be more stubborn while headphones jack front of switch.

  Hi zombi1,

  Welcome to the HP Forums!

  I did some research on whether or not we can use the analog or digital audio output at the same time, and it is unfortunately not possible.

  Thanks for posting and happy Earth Day!

• analog audio cable to digital

  I want to get a small walkman cassette audio 3.5 mm cable into the computer by the USB bus. Am I understanding that the required cable must be 'converted' because one end is analog and digital on the other? I intend to cassettes music download the Garageband application. If Yes, where can I buy such a cable converter, I hope that stereo, perhaps with nickel or gold contacts?

  You need an analog-to-digital converter for this: for example https://www.amazon.com/HiFiMeDIY-Digital-Analog-Converter-PCM2706/dp/B00CWVDPC0/. Alternatively you can get a simple tape with a USB connector like this player: http://www.tape-2-mac.co.uk/.

• Mac Pro (early 2009) Analog Audio Line-in for Airplay?

  I have a stereo receiver and the turntable connected to my Mac via the analog line in port. The incoming audio signal is visible in the input Audio Pref Pane.

  Is it possible to listen to this audio on Mac?

  Is there a way that audio to device Airplay (specifically an Apple TV)?

  Thank you!

  Too bad. Rogue Amoeba to the rescue Airfoil. (A correctly worded Google search has been the key)

• HP ENVY 700-210 Desktop PC: Windows 10 improved rear output loss taken audio input on desktop HP Envy

  Beats and all software audio apps work fine after 10 window installed. but I lost out in all but one of my audio jacks back during playback using any audio application (Media Player, Cakewalk, etc.).  I went to manage audio devices on the control panel and to configure/test the speakers/headphones and I went out on the set of the back to my speakers during the test; but, not for playback of audio applications.

  I found a solution.  After the announcement of this question, I went through the different options for audio and put to update my sound driver.  Since I got a response from the Microsoft Community ( http://answers.microsoft.com ) forum which confirms this.

  > Go to Device Manager (press Windows + X, select Device Manager button.

  > Locate the audio adapter.  In my case, I had two entries for audio devices, "Audio inputs and outputs" and "audio, video, and game controllers.

  > I updated the driver for "IDT High Definition Audio CODEC" under "audio, video and game controllers".   It worked.

  > I had to reboot twice before it takes effect.

  > It seems that it is the same driver for 'Speakers/headphones' under ' Audio inputs and outputs.

  > Update drivers is reversible using the button "revert to the version.

• Qosmio F60 - 00Y has an optical output of the Audio (toslink\spdif)?

  The Australian model of Toshiba Qosmio F60 has an optical audio output?

  Hello

  I found this page of Toshiba Qosmio F60 - 00Y on:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=194743

  Unfortunately, there is nothing on SPDIF and digital output.
  I found some details about the European series F60 and didn t find info on SPDIF

  For me, it seems that the SPDIF is not available but it's just a guess

• Satellite L500-131, an HDMI output to the audio amplifier

  Hello

  I can't the sound of my Satellite L500-131 HDMI port to my Pioneer amp supposed to be designed to manage these tings...

  Think the problem is in the early stages as I * don't * select "Realtek HDMI output" as default + output + option is not available.
  Playing around, I managed to get to an old Microsoft driver hidden in memory somewhere and could select HDMI output 'default' through the laptop speakers. But ultimately this ddn can't get sound through either, well that the volume to "sound board" control of Vista indicates activity signal (bars during playback of DVD)... :|

  No idea what is the problem? By selecting "Output HDMI" audio output by default seems to be a Solver for everyone, but it's the only option that is not left in me, so frustrating... :|

  Thank you very much for any help provided.

  Hello

  To be honest I often use HDMI connection on my laptop but I never had any problems with this connection. Everything is working properly and even I checked again all works well!

  Anyway, in your case, I'll try reinstalling the audio driver. You can find it on the Toshiba site.

  If you use the HDMI connection, connect the cable first. Then turn on your TV or your amplifier and finally the laptop.
  Check it!

• trying to trigger multiple analog measures with each pulse of an encoder 500PPR

  I'm taking steps analog multiple sensors to formula 6 with each pulse of a 500 ppr encoder and write these to a file.  I met problem is I don't get 500 readings with 1 revolution of the encoder the more I received is 187 but is not consistent.

  using

  Card series E 6024

  EIB L25G encoder

  Still relatively new to labview as well as using an old version 7.0

  Thanks in advance

  Never mind after watching it somemore I found that I was using the wrong sampling frequency

• Constant voltage using myDAQ output

  Im a student and I'm using myDAQ for my final project, I have buil year VI and I want to add a constant output of 3, 3V, during the course of the VI.

  searched the forum, impossible to find something with myDAQ.

  Here's my VI:

  

  Just put a new assistant on the diagram of block and instead of the acquisition, select build from the beginning. Choose your channel. Select 1 sample. Wire your constant Assistant.

• How can I change the configuration for the output channels analog on a PXI-6704?

  I can't seem to understand how to access the configuration of the channels to the outputs analog (channel 33 and 35) for PXI-6704.

  This piece of test equipment is out of tolerance and must be calibrated.

  I have followed the procedure of calibration http://www.ni.com/pdf/manuals/374081b.pdf, but am getting hung up on step 8, where it is said to repeat steps 4-7 when changing the _cal_ao_current_offset. I can't figure out how to open this channel because it is not listed as a physical channel for step 5.

  I'm using Labview 7.1

  Thank you

  Hello! What you need to do is to add 'Internal channels' to your list of channels, so you can choose the _cal_ao_current_offset or _cal_ao_voltage_offset.  This is done through the drop-down list channel right click and select "I/o name of screening...". ».  There will be a check box that says 'Internal channels' and will provide you with all available internal channels to enter your vi Create Channel.  I have attached some photos illustrating how to do. See you soon!

• How the sequence of output of analog signals in LabView

  Hello, I want a series of analog output signals of sequence using LabView to my box USB-6281. For example I'd like a sinusoid of output for 10 seconds, then a wave square for 20 seconds, then a triangle wave for 10 seconds. I want to do it automatically, so I have not put on a sine wave, wait 10 secodns and change it manually. I tried to use a straight sequence structure and using delays in the loops, but it did not work. IM relatively new to LabView so im just stuck here. any help would be greatly appreciated.