The alarm not during charge

Similar Questions

• The alarm not

  My alarms are visible but silent despite the fact that the sound is turned on and the volume is turned up.  Does anyone else have this problem, if so, the solutions found?

  Thank you

  Make sure that DND is not enabled. Settings > do not disturb > disable.

  Also, make sure the switch on the side of the phone. If you see orange, set the switch in contrast to reactivate the system sounds.

• Keeping the backlight on during video playback with alarm does not not with OS 4.7 round

  I am developing an app that plays the video using the alarm, like this:

  player_ = Manager.createPlayer(url);
  player_.realize();     
  
  VideoControl_ = (VideoControl) player_.getControl("VideoControl");
                  videoControl_.initDisplayMode(VideoControl.USE_GUI_PRIMITIVE,                 "net.rim.device.api.ui.Field");
  videoControl_.setVisible(true);
  player_.start();
  

  The duration of the video is longer than 2 minutes. On OS 4.6 device such as the curve, the video plays without the screen goes black.

  However, on the circuit of 4.7 OS, screen goes black even if I try to activate the backlight on regularly, like this:

          final Timer t = new Timer();
          TimerTask tt = new TimerTask()
          {
              public void run(){
                  Backlight.enable(true, 240);
              }
          };
  
          t.scheduleAtFixedRate(  tt, 0, 240000 );
  

  The integrated application of Media Player can play the video even without the screen going dark.

  How can I avoid the screen of goes black on device OS 4.7 during video playback using VideoControl?

  Thank you.

  Now works with this change:

  t.scheduleAtFixedRate(  tt, 0, 24 * 1000 );
  

• Impossible to interrogate the alarms & events, alarms does not connect

  Hi all

  I recently ran a question with the DSC alarm event & logging. I have a number of all shared variables libraries set up to record data and alarms at the Citadel. I double checked that the library itself is configured for data recording and alarms, as well as all the variables. Using the DSM, I can see all alarms active in the system across all libraries and can receive all the alarm by program change events.

  For some reason, alarms to one of the libraries are logging, and attempt to query the historical events & alarms via MAX raise an error at about 14 of 15 times (with no code error or indication of why it fails). I have also tried to check the database of the Citadel, with it fails with an error unspecified (presumably during archiving on the side of things alarms, archive data seems to work).

  Can anyone offer an overview on how to solve the problem, preferably without data loss? In addition, how can I avoid this problem in the future?

  Thanks for the suggestion. I tried the llb related, but it could not remove existing data. That said, I managed to resolve the issue.

  Removal of the database of alarms (not only the alarms), did the trick. My approach was:

  1. stop all libraries through DSM

  2. create the new base of Citadel by MAX

  3. use DSC Archive Traces VI to check in the footsteps of the database active for the newly created database

  4. remove the active database

  5 detach the new database

  6. move the new database on disk for the location of the old database

  7. set the new database with the same name as the old database

  8. start all libraries

  At this point all the alarms started logging in correctly and I can query the alarms without problem. The system is on a UPS now, so I hope that any future power failure does not affect the things.

• I loaded my batery overnight, but the batery is still not fully charged

  I BOURGHT A NEW BATERY AND CHARGE DURING THE NIGHT, BUT THE BATERY ONLY 68%, BUT IS NOT COMPLETELY LOADED. I myself REQUEST WHY, HOW to CHARGE IT COMPLETELY.

  Hello

  I suggest that you charge the battery once more to make sure if the problem is with the battery.

  If you encounter the problem even after charging the battery, then you can see the steps in the link below to fix the problem.

  Solve battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  You can also get in touch with the manufacturer for assistance.

• Z5 - connection to Smartband-SWR10 - and the alarm do not start schedule

  Hello

  In the last month, I knew that my phone and smartband guard abandon the connection. On the phone it shows like eather and x on the smartband icon, or SmartBand apps that said 'Connection' without that nothing happens. Sometimes just turn of the smartband at other times I need to restart the phone to get the connection to the top and the race.

  I have all the altest SW for Z5 (32.0.A.6.200) - SmartBand (05.00.12 - 1.7.0.873) and Lifelog (2.9.A.3.8)

  Since I use the smartband to wake me up in the morning, it's very enoying it does not work. So far I managed to wake up by myself...

  The phone is in charge all night and in the cradle, with the converted sound. The phone is on, with the exception of notifications. The phone is set to vibrate and make a soft noise. The Smartband is set to vibrate.

  If the connection is droped overnight, neighter the phone nor the smartband gives an indication of the alarm.

  I knew that the smartband and the phone vibrates, but there is no sound from the phone. Another version is that the phone is vibrating and making a noise, but the smartband does not vibrate.

  Before going to sleep, I check that the phone is set to the minimum, and that the connection to the smartband is OK.

  Good ideas to fix this problem?

  Hi again

  I didn't have any problems, fell to connedtions, after my Sunday relocations. So I think that the question could have been between LIfelog and Smartband software issue, but I'm not sure.

  So in short I belive the solution to my problem was to - uninstall both SmartBand and Liflog, to ensure that there is no software problems. Hope this might help others with the same problem.

• Why my ZTE open c Firefox OS Smartphone forget the wlan settings and does not sound the alarm?

  Sometimes it is even enough to go outside the trash to let my smartphone to forget the settings for the wireless LAN. When I come back, I have to re-enter my wlan router - not so short - code. Once the internet connection is running as it should.

  In addition, the alarm does not work, I can adjust alarms as I like, set the volume to maximum and also activate the vibrator but does nothing when the time arrived, even when the alarm appears on the screen all the time. Is my broken phone? Or is this a bug in the installation of Firefox OS?

  Where Firefox OS does not store these values for wlan connection and waking hours? Is there an internal database that may be corrupt?

  Hi Markus,.

  I understand that you are having problems with the Wi - Fi connection and the awakening of your phone ZTE C open.

  The problem of awakening seems to be similar to what has been reported by other users and is followed on bug 1052245.

  You have more information about wake-up issues that you are experiencing? This can be very useful to our engineering team is studying. Please be aware that the ZTE is the manufacturer of your device, and only they are able to release an update.

  The wifi problem can be linked to the bug 923324.

  Please reply to this message with the following information:

  • What is the OS version and Build ID found on the device information page? Please visit this link if you need help to find the ID for your phone.
  • Please provide the exact steps to reproduce the problem you are experiencing.
  • How many times you experience this problem?

  Please be sure to include as much detail as possible, including all Web sites who may have this issue and the error messages that you may receive, exactly as they appear. This will ensure that we have all the information needed to investigate this problem.

  -Ralph

• How will I know if my mini ipod 4th generation is in charge? The blinking not solid.

  How will I know if my Mini Ipod 4th generation is in charge.

  I plugged it in - the blinking not solid.

  It's an iPod shuffle, right?  Small place with design clip - on and no screen...

  Blinking light means DO NOT DISCONNECT, because the iPod disk is mounted by the system.  EJECT iPod (in iTunes) before physically disconnect the iPod.  If you eject , but leave it connected, the light becomes solid.  (Yellow or green) light means OK TO DISCONNECT.  When it is yellow, the battery charge.  When it is green, the battery is fully charged.

  NOTE: In the normal conditions of use, flashing light is always yellow; It's supposed to be a warning.  It does not indicate the State of the battery; never it flashes green.

• [Z510] Problems with the battery not charging

  I have ideapad z510 for almost a year. and now my unit still shows that it is at 0% battery. and she indicates that she battery level does not increase. and for this reason I could not use my unit when it is not plugged. What should I do about it?

  Comment to Moderator: New thread is created. The topic is edited to include the model.

  In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

  This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

  • Battery is dead
  
  
  • Battery is not detected
  
  
  • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately
  
  
  • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

  Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

  The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

  Thank you

• Alarming - alarms defined by the user not appearing is not in history

  Hello

  I use the DSC module to create alarms.  I can successfully configure an alarm for a shared variable.  I use the alarms.vi of reading to read the current alarms.   I am able to recognize and to disappear which removes them from the list.  I also see a history of them when using the "alarm and event Query.vi.  Now, I do the same with user-defined alarms.  I have created alarm using the "user defined Alarm.vi value.  The alarm are displayed in the list (read alarms.vi).  I can acknowledge the alarm and it disappears from the list.  Now when I use the 'alarm & Query.vi' the user defined alarm does not appear in the list.  Only shared variable alarms are displayed.  Is this correct?  Is there a good example of what I'm doing?  The example of "User defined DSC alarms Demo.vi" does not give an example of reading historical alarms defined by the user of the database.

  Thank you

  Matt

  I removed the DSC module and re-installed which includes SQL Server.  That did the trick.

  Thanks for your help Caleb

• When the portable computer connection, battery can not be charged

  I just bought my phone yesterday and when I plugged in... the battery can not be charged

  If you bought it just take it back to the shop or their ring. The law says that if you're selling something, it must be "fit for purpose" that is not obviously corresponds to the end so that it has been designed and they should sort.

  Free support tools

• The alarm works do not at all please please Heeeeeelp

  After updating my Xperia Z2 about 3 days ago (October 1st) with the last update... The alarm does not work... Not a notification or lights or anything

  In addition, the clock at the top of the screen will not be updated as long as the device is woken up... It updates the clock when I lock the screen and open again.

  @KHashaBA

  Let us know if it worked please.

• After I installed Windows 7 on HP laptop, get the message "not plugged in charge."

  Same laptop, charger even worked well in Visa. After a clean install of Windows 7, I get the message "not plugged in charge."

  On my system:
  HP / Compaq Mobile Workstation 8510w
  The charger is intended to be used for an additional cost / secondary battery - which worked fine under Vista when connected to the laptop. Still, ordinary charger works fine in Windows 7.

  So my question: must be unwanted software in Windows 7. Somehow, she acknowledges that it is not the normal charger and refuses to use it - but since it worked fine under Vista I would like to continue using it.
  How can I do this in Windows 7?

  Concerning
  Wolfgang

  I had the same problem with my Compaq after upgrade of a cell of 12 after battery box white market. What I did first, was I uninstalled and reinstalled ' Microsoft ACPI - control method battery compatible "and who did not work, so I followed the following steps:

  1. a laptop battery and remove (while on).

  2. open the lid and remove the AC adapter / CC (for again, turn off the system)

  3. close the lid and plug in the battery

  4. open the cover, plug the AC adapter and turn on.

  After I did the above, my system began to charge the battery. Some people say that after step 2, shut down the system before you unplug it from the AC. I don't have because most of the solutions I found does NOT shut down the system first. If you've been careful with your system, this time above should not do harm to your laptop

  Matt102

• Why my laptop wireless computer connect to the internet first thing in the morning and late at night, but not during the day.

  I wonder if you can help me please?

  I have problems with my satellite internet access on my laptop wireless.  He beautifully connects to the router and the signal is excellent. However, I'm unable to connect to the internet.  I can use the laptop first thing in the morning because it connects right away, but I would say that 95% of the day I can't use it at all.  Sometimes it will work later in the evening.  I learned this could be due to the intensity of the signal and that some suppliers to fall during the day.  My desk top connects perfectly (if the weather permits it) but is not on the wireless network.  I had no problem with my laptop when I used my previous service provider.  It becomes more frustrating that the inability to use the internet visited my lap top unnecessary.  I can't use it on my neighbors wireless network no problem at all but they we internet different provider.  Can you please help because I don't know why it works first thing in the morning and sometimes late at night, but not during the day?  No matter where the lap top is the first thing in the morning, it will work even if it is forty feet away.  I can sit during the day with my phone right by my router and it still not connect to internet even though the router signal strength is excellent and desktop is on the internet.  Any help would be great, because it leads me into the wall!  I am using WIndows 7 on my lap top from acer.

  Kind regards

  Julie

  I would like to thank everyone for their help with my question.  I can tell you now that I have it solved and I'm pretty embarrassed to say the least.  Following a change of internet service provider, I put a cable into the wrong port on the router... silly me!  It works perfectly now. Thank you once again.

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win