Workstation PC with full PCI (ie. 256) buses numbering?

Similar Questions

• Dell Precision Workstation 690 with Win7-64 final. -3 TB hard drive?

  I have a Dell Precision Workstation 690 with Win7 64 Ultimate installed.  I want to use a 3 TB drive.  How will I know if the SATA controller is compatible with a 3 TB drive. ???

  How to know what Board motherboard or the SATA controller module I have?  When the computer starts first the BIOS detects SAS 5 Host Bus HBAO (?)  I forgot the exact name of disks while he finds the SATA drives.

  Greetings Tenoc,

  Thanks for posting your question on the community.

  The integrated SAS controller that comes with the Precision 690 name: 1068 LSI PCI - X - SAS 3 Gb/s controller. He is old enough, at this stage, and I'm sure that it only supports MBR (limit UP to 2 TB).

  You can try adding in a newer card, like the Perc H710. Not sure if it works or not. There are various other cards you might try there.

• Controller PCI Modem & SM Bus these two haveYellow of devices? "s in Device Manager

  PCI Modem & SM Bus controller. These two haveYellow of devices? "s in the Device Manager.

  Just did a clean install of Win XP Pro Service pk 3. Other device driver problems fixed, but am struggeling with two damage previously mentioned.

  Help me please. Thnx Ben

  Hello

  · What is the number and the model of the computer?

  Double-click the device and search for the exact error message or error code in Device Manager.

  You can see the links below and check if it helps: Troubleshooting conflict of devices with Device Manager: http://support.microsoft.com/kb/310126

  How to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• HP TouchSmart 610-1190f: replace the TV Tuner card AVerMedia HP TouchSmart 610 with SSD PCI-E

  I do not use the TV Tuner card for my HP TouchSmart 610.

  Can I replace the card with a PCI-E SSD?

  Hi @hpts610user,

  These all-in-one computers are not designed to be changed. I'll try not because of space and design.

  Here is a document of things which can be updated LEVEL AND SERVICE of GUIDE. .

  Perhaps looking to put a hard drive hybrid to replace the old hard drive.

  I hope this helps. Please keep me informed of the progress of things.

  Please let me know if that solves the problem by marking this post as "accept as a Solution. To simply say thank you, click the Thumbs up below!

  Thank you.

• Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed.

  Z820 with LSI 2308 sas controller will not publish with intel PCIe SSD installed. The system works fine with Sata 600 pro SSD for windows and WD 4 TB Black seagate for storage. When the Intell 900 PCIe SSD drive is installed the system hangs at the LSI Mini OROM screen remains white. is there a way to put the LSI controller to jump the PCIe slots for boot devices?

  2 X Xeon 2695, 64 GB Ram, graphics Nvidia Quadro K5000, 2 X Intel 10 GB Ethernet card.

  Thanks for the reply. In fact I've disabled the LSI controller and connected to the integrated SATA controller and the Z820 starts and works perfectly with the PCIe SSD installed.

  Thank you.

• Tried to replace the video card integrated with card pci-e x 16 and lost audio - help please

  Is this normal - when you replace your car video with a pci-e video card you would lose your sound.  The system I have is a Pavilion a1450n and has 3 pci slots and 1 pci-e.  I changed the pci-e video in the bios and everything is fine, but no sound at all.  When I took out the card then I would sound.

  Please help.

  The former system of video seems to give me a little trouble.  He keeps hide and freeze from time to time.  Don't know when that will happen.  But when this happens, a blue screen it freezes or just blanks out and comes back.  It will happen nobody knows.  Everything else works fine.  Hate to give up this old gem - for a lot of software installed to lose.

  Thank you all very much for help.

  William

  Hi, William.

  Yes, when you have an old PC where the BIOS does not have HDMI.

  Your PC thinks that you have installed a sound card and a video card because of the HD audio chip on the video card.

  Thus, he disabled the integrated audio system.

  The fix should be easy...

  Go into the BIOS of your PC, look at the options menu and find the onboard audio setting.

  It will be set to auto or off.

  Change the setting to "Enabled". Save the configuration it and yet when you go out (save the settings and exit).

  When you restart, you should have the back of Board.

• 2135 HP all-in one: cannot print full Page A4, but can scan A4 with FULL Page

  Hi HP & friends,.

  Hello I am using 2135 HP all-in-one printer with windows 7 64 bit,

  I have some problems, and maybe I need your help to solve my problem.

  First of all, I'm trying to scan or copy the test page, I can't scan A4 paper with full size and then I'm trying to reset the configuration on the scan of the letter in A4 format and voila I can scan using A4 format with full screen.

  But my problem occurs when I try to use the file that I scan to be printed, I have a cut off area or empty the bottom of the page. Hmm I have a set configuration with A4 before printing the document.

  I am trying to attach images to show on my problem.

  

  Thanks for the attention and the solution

  Concerning

  Spoiler (Highlight to read)

  

  

  Hello

  Your printer model do not support a full borderless printing, must not exceed the specified margin and it is a limitation of the hardware.

  You can find his record of handling of paper below:

  Borderless printing: No
  http://www8.hp.com/in/en/products/printers/product-detail.html?oid=7174564#!tab=specs
  

  Minimum printer margins are 2.96 mm high, right and 14.5 mm (1.45 cm) for the lower left margins and margins of the page, the printer cannot exceed and to print on these margins, see the section called paper handling > margins below:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-2130-all-in-one-printer-series/7174559/model/7174560/document/c04616318/

  Kind regards

  Shlomi

• images corrupted with NOR-PCIe-1429

  We have a Basler A504k camera connected to a NI PCIe-1429 + 1430 framegrabber. The device used to work
  regularly until that some time ago and has been tested as working on an another framegrabber locally
  Representative office of camera. With our framegrabber, we're testing the connection in MAX, free acquisition mode.
  Seconds after having started to enter, we often get corrupted images, like the one attached and in
  all cases error timeout BFF60022 shortly after.
  The defective behavior happens apparently regardless of the parameters of the AOI, duration of exposure, cadence.
  We tried the camera combination + framegrabber on two different computers, running two different
  versions of MAX (4.0 and 4.5), with exactly the same results. Joint are a regular image (obtained immediately after the beginning of the clip), damaged a (a few seconds later) and the error dialog box.
  How can we solve the problem and understand if our framegrabber is to blame?

  Updates, just to wind up this debate.

  It turned out that food, which initially provided with the camera, but was actually a no name Chinese thingy, was most likely responsible for the malfunctions. The fact is that the camera works regularly in combination with the PCIe-1429 and long supported once connected to a Psalm stabilized decent during testing we found that the device itself accepts a wide range of input voltages (nominally 12V, worked perfectly between 8.8 and 13.2, very probably, it has an internal DC/DC), but that it went wrong with the original PS whenever the temperature came to exceed a threshold given. What unwanted noise PS used to provide in order to create such disorders, is not relevant at this stage.

  I note, however, that tests supported the camera even with defective PS gave no problems when tested framegrabbes, the last of which was a Matrox Helios. Maybe it's an indication of the best tolerance to marginal quality card signals of NOR. Both an old PS has been used, the camera showed the problem report with * two * our PCIe-1429 and replacement of Eran, on two test computers.

  In addition, a correction: our configuration used to designate a PCIe-1429 and an auxiliary IMAQ-1000, bound by a Ribbon of the RTSI. I the last PCI-1430 misnomed in my previous posts, which is not, and I was initially under the impression that it could be part of the problem.

  Enrico

• How to get previews of lower quality when working with Full-HD?

  I work with Full-HD video, but I don't have to preview the files (rendering) to be too the 1920 x 1080. It takes a lot of disk space and a lot of time to make the preview files.

  Is it possible to ensure a lower quality? For example, resolution 720 x 405 would be sufficient.

  But when I want to make a permanent export, I need to get the Full HD video.

  Thank you!

  Use a custom sequence and change previews as you wish.

• Lack of Ethernet controller, Comm Simple PCI controller, SM Bus controller - g6-1d73us Pavilion

  I'm at the end of my rope. Downloaded and installed all the drivers for my model laptop, but the yellow triangles appear next to these 3 controllers in Device Manager. Don't know what I'm doing wrong and I can not get online via ethernet. Help!

  Ethernet controller:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_1695103C & REV_05

  PCI Simple Communication controller:

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_1695103C & REV_04

  SM Bus controller:

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_1695103C & REV_05

  Install Windows 7 Ultimate 64-bit

  Hello:

  The drivers you need are not on the support page and driver of the laptop which is the reason for which you are unfairly at the end of your rope.  If you do not have something wrong.

  First install the chipset driver and restart. Top download, this is what you want.

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=20775&keyword=%22Intel+chipset+software+installation+utility%22&lang=eng

  Next: Driver IMEI.

  I can't tell you which you absolutely need, but it's one of those two.

  Go first with this one.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-98626-1&prodTypeId=321957&prodSeriesId=3688868

  If at first you don't succeed, try, try again... with this

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-82656-1&prodTypeId=321957&prodSeriesId=3688868

  Last is the card cable... a 5th on the list (Win7 and WinServer 2008 R2 Auto Installation Program (SID: 1497589)).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  It was not very sporting of HP, was it?

  Paul

• encryption PCI drivers, sm bus controller problem driver

  Hello

  I am using hp-15-g009AX laptop, I installed windows 7 64-bit os.

  all other drivers are perfectly installed and works very well, except pci encryption driver and sm bus controller drivers.

  I called hp care.they sent this link http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64349.exe

  but these drivers that I downloaded from this link are not compatible with my pc.

  the link related to the drivers of intel.

  Help, please...

  Thank you.

  Hello:

  First install the amd chipset drivers and reboot.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  E/D PCI controller:

  See if the W8.1 driver works...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.TPST=swdMain&s...

  If it installs automatically, great.

  If this isn't the case, close any windows error.

  Go to Device Manager and click the controller of encryption/decryption PCI needing drivers.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software method and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp66899.

  Make sure that the include subfolders is selected and I hope that the driver will be installed.

• Workstation 12 - toolbar full screen does not drop down.

  I've recently upgraded to Workstation 12 pro.

  Since then all my virtual machines cannot invoke unrolling of the toolbar mode full screen.

  I use a host of windows 7 ultimate 64 bit with two screens.

  I use the workstation on a monitor while leaving the other free monitor (usually to read documentation so I use the virtual machine to test various things)

  In addition to Ctrl + Alt + Enter does not drop back me to full screen.

  Someone else knows it?

  TIA

  I discovered the answer.

  It was pretty boring, I wanted the toolbar drop-down list so I could update the vmware tools (I often, simply click with the right button on the tab and choose Update VM tools)

  Unfortunately, I have my VM set to enter the mode full-screen power

  I changed that to climb to a window at startup.

  upgrade VMware tools and the problem disappeared.

• XPS 8500 with full SSD

  I have a XPS 8500 I bought in January of 2013.

  It has a 256 GB Samsung SSD, which is almost full.

  It also has a 2 TB HDD which has plenty of room.

  I get an error message all the time telling me that my SSD or startup disk runs out of space.

  How to free up space on the SSD? I can't find very many programs that take up a lot of space and can not figure out how to clean this drive to make it have more space. I guess that all programs must be installed on the C drive working correctly? Should I uninstall programs have and see if I can install it on the D drive, with more space? I store all my files, such as music and images and documents on the D.

  Any advice here? There are probably 1 million ways to do it better.

  Thanks in advance!

  Version of Windows?

  Is it really to store anything on this great hard drive?

  What generally happens is that Windows stores everything in the 'default' files (for example, Documents, photos, music, etc.) on the same drive where Windows is installed. In your case on the SSD. Then he filled up quickly, but the other disk is empty.

  I recently had a similar problem with a laptop running Win 8.1. Everything was stored on the SSD and the 1 t HARD drive has been entirely unused.  I followed the instructions here to move these files to the 1 t by car and who installs all files and now everything is automatically saved to disk rather than on the SSD and hard.

  The key is that you must create records of 'destination' on the hard disk before tell you Windows to redirect them to this another drive. And don't store everything in the directory root hard disk or you will have a mess.

  In my case, I created folders D:\Documents, D:\Photos D:\Music; D:\Downloads, etc. on the hard drive that has been assigned the drive letter D: by Windows when the operating system has been installed. Then I followed the instructions to move the (SSD) folders from C: to D:.

  Now my 256 GB SSD is less than 1/4 full and all my files are stored on the hard drive. Problem solved!

• [8i] need help with full outer join combined with a cross join...

  I can't understand how to combine a full outer join with a different type of join... is it possible?
  
  Here are some create table and insert for examples of database:

  CREATE TABLE     my_tab1
  (     record_id     NUMBER     NOT NULL     
  ,     workstation     VARCHAR2(4)
  ,     my_value     NUMBER
       CONSTRAINT my_tab1_pk PRIMARY KEY (record_id)
  );
  
  INSERT INTO     my_tab1
  VALUES(1,'ABCD',10);
  INSERT INTO     my_tab1
  VALUES(2,'ABCD',15);
  INSERT INTO     my_tab1
  VALUES(3,'ABCD',5);
  INSERT INTO     my_tab1
  VALUES(4,'A123',5);
  INSERT INTO     my_tab1
  VALUES(5,'A123',10);
  INSERT INTO     my_tab1
  VALUES(6,'A123',20);
  INSERT INTO     my_tab1
  VALUES(7,'????',5);
  
  
  CREATE TABLE     my_tab2
  (     workstation     VARCHAR2(4)
  ,     wkstn_name     VARCHAR2(20)
       CONSTRAINT my_tab2_pk PRIMARY KEY (workstation)
  );
  
  INSERT INTO     my_tab2
  VALUES('ABCD','WKSTN 1');
  INSERT INTO     my_tab2
  VALUES('A123','WKSTN 2');
  INSERT INTO     my_tab2
  VALUES('B456','WKSTN 3');
  
  CREATE TABLE     my_tab3
  (     my_nbr1     NUMBER
  ,     my_nbr2     NUMBER
  );
  
  INSERT INTO     my_tab3
  VALUES(1,2);
  INSERT INTO     my_tab3
  VALUES(2,3);
  INSERT INTO     my_tab3
  VALUES(3,4);

  And, the results that I want to get:

  workstation     sum(my_value)     wkstn_name     my_nbr1     my_nbr2
  ---------------------------------------------------------------
  ABCD          30          WKSTN 1          1     2
  ABCD          30          WKSTN 1          2     3
  ABCD          30          WKSTN 1          3     4
  A123          35          WKSTN 2          1     2
  A123          35          WKSTN 2          2     3
  A123          35          WKSTN 2          3     4
  B456          0          WKSTN 3          1     2
  B456          0          WKSTN 3          2     3
  B456          0          WKSTN 3          3     4
  ????          5          NULL          1     2
  ????          5          NULL          2     3
  ????          5          NULL          3     4

  I tried a number of different things, google my problem and no luck yet...

  SELECT     t1.workstation
  ,     SUM(t1.my_value)
  ,     t2.wkstn_name
  ,     t3.my_nbr1
  ,     t3.my_nbr2
  FROM     my_tab1 t1
  ,     my_tab2 t2
  ,     my_tab3 t3
  ...

  So, what I want, it's a full outer join of t1 and t2 on workstation and a cross join of one with the t3. I wonder if I can't find examples of it online because it is not possible...
  
  Note: I'm stuck dealing with Oracle 8i
  
  Thank you!!

  Hello

  The query I posted yesterday is a little more complex that it should be.
  My_tab2.workstation is unique, there is no reason to make a separate subquery as mt1. We can join my_tab1 to my_tab2 and get the SUM in a subquery.

  SELECT       foj.workstation
  ,       foj.sum_my_value
  ,       foj.wkstn_name
  ,       mt3.my_nbr1
  ,       mt3.my_nbr2
  FROM       (     -- Begin in-line view foj for full outer join
            SELECT        mt1.workstation
            ,        SUM (mt1.my_value)     AS sum_my_value
            ,        mt2.wkstn_name
            FROM        my_tab1   mt1
            ,        my_tab2   mt2
            WHERE        mt1.workstation     = mt2.workstation (+)
            GROUP BY   mt1.workstation
            ,        mt2.wkstn_name
                          --
                  UNION ALL
                          --
            SELECT      workstation
            ,      0      AS sum_my_value
            ,      wkstn_name
            FROM      my_tab2
            WHERE      workstation     NOT IN (     -- Begin NOT IN sub-query
                                             SELECT      workstation
                                     FROM      my_tab1
                                     WHERE      workstation     IS NOT NULL
                                   )     -- End NOT IN sub-query
         ) foj     -- End in-line view foj for full outer join
  ,       my_tab3  mt3
  ORDER BY  foj.wkstn_name
  ,       foj.workstation
  ,       mt3.my_nbr1
  ,       mt3.my_nbr2
  ;
  

  Thanks for posting the CREATE TABLE and INSERT statements, and very clear expected results!

  user11033437 wrote:
  ... So, what I want, it's a full outer join of t1 and t2 on workstation and a cross join of one with the t3.

  She, exactly!
  The trickiest part is when and how get SUM (my_value). You could address the question of exactly what my_tab3 must be attached to a cross that's exactly what should look like the result set of the full outer join between my_tab1 and my_tab2 to. To do this, take your desired results, remove columns that do not come from the outer join complete and delete duplicate rows. You will get:

  workstation     sum(my_value)     wkstn_name
  -----------     -------------   ----------
  ABCD          30          WKSTN 1
  A123          35          WKSTN 2
  B456          0          WKSTN 3
  ????          5          NULL          
  

  So the heart of the problem is how to get these results of my_tab1 and my_tab2, which is done in the subquery FOJ above.

  I tried to use auto-documenté in my code names. I hope you can understand.
  I could spend hours explaining the different parts of this query more in detail, but I don't know that I would lose some of that time, explain things that you already understand. If you want an explanation of the specific element (s), let me know.

• Firefox 18.0.2 aligns with full screen in Windows 7 (32 bit) even when I slide sideways. Anyone else seeing this?

  Windows 7 align on the net somewhere around 15 FF (FF drag window to the left or right edge of the desktop) has stopped working. FF now aligns only on the full screen. It's really a pain since I often have two Windows Open (FF at the request of the half, such as excel or outlook open in the other half). I keep hope it is fixed with the next version, but I see that this problems with 18.0.2.

  Safe mode is a good suggestion. Snap of half-screen FF has worked in safe mode. I then jumped back to normal mode and started disabling add until I figured out that you caused the problem (FindBar Tweak 0.5.5). All better now. Thank you!