Z5 - connection to Smartband-SWR10 - and the alarm do not start schedule

Similar Questions

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• Computers button just flashes and the computer will not start

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Hey Bowers

  you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

  otherwise, it would seem that you have a hardware problem

  Contact the manufacturer of the computer or a local reputable computer repair workshop

  Walter, the time zone traveller

• my power green LED flashes and the laptop does not start

  Mr President, I have laptop computer Sony vaio, when I press the power button, my power LED green light begins to blink, sometimes sometimes brighter Sun, but nothing else happened, my fan remains closed, screen remains black, just POWER green LED flashing, flashing in the same way as orange light flashes in case of in standby mode, it is usually solid green , but now it flashes and the laptop does not start, what should I do Sir...

  My model number is the model of Sony VAIO PCG-61911W... His VPCEG18FG of the product name

  ankurgupta53,

  It seems that your device is not post.  You can try reinstalling the ram or simply by using a single module at a time, but other that that the device would need service...

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371

• Just renewed my membership to the Muse and the program does not start, what can I do?

  I changed my billing data, the charge was made, but just Muse does not start. It is for me the survivor of the screen of your subscription again and again and again. What can I do? I have an urgent job to do.

  Refer to this:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Delete the old information in the OOBE and SLStore folders and connect again.

  Mylenium

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• 0X803C0107 error: you cannot access shared files and printers and the MSE does not start at startup

  Original title: mainly MSE does not start at startup. have you tried re-loading and other elements on the card, still no luck. Here is the error code I have and the information complete.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Error 0X803C0107

    Details of the editor for Windows Firewall troubleshooting

    Verified issues

    You cannot access shared files and PrintersYou cannot access shared files and printers

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445. Checked

    No workingRemote Assistance remote assistance does not

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance. Checked

    Windows Vista may not start Windows Vista FirewallWindows could not start the Windows Firewall

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned. Checked

    Windows Firewall service is not his firewall service is not started

    Windows Firewall service is not running or is not started. Checked

    Issues checked the details of the detection

    6 you cannot access shared files and printers checked

    You can't access shared folders or printers on a computer on which Windows Firewall is enabled. This happens when the Windows Firewall blocks traffic entering via the UDP ports 137 and 138 and the ports TCP 139 and 445.

    Unlock the file and printer sharing in Windows Firewall works not

    To allow access to shared folders and printers, except for the file sharing and printers in the Windows Firewall must be enabled.

    6 remote assistance works not verified

    When you use Windows Help and Support, remote support available to offer assistance to a computer, you receive the error message "the remote server computer does not exist or is unavailable", even if Remote Assistance and file sharing and printing are activated. Windows Firewall may be blocking Remote Assistance.

    Allow Remote Assistance in Windows not running Firewall

    Which allows Assistance remotely as an exception in Windows Firewall it unlocks and corrects this problem.

    6 Windows Vista could not start Windows Firewall check

    On a computer that is running Windows Vista, you find that the Windows Firewall service is not running. When you try to manually start the service, you get "Windows didn't start the Windows Firewall on the Local computer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular 5 error code. "error message. This can occur if the 'MpsSvc' account does not have the necessary permissions for the registry keys concerned.

    Set permissions for the registry keys concerned not run

    Setting permissions for the registry keys concerned will solve this problem. Applies only to computers by using Group Policy to manage the firewall.

  6 Windows Firewall service did not start Checked

  Windows Firewall service is not running or is not started.

  Start the Windows Firewall service is not running

  Start the Windows Firewall service solves this problem.

  Details of detection

  Collection information

  Computer name: NORMBRESINSKI

  Windows Version: 5.1

  Architecture: x 86

  Time: 09-20-2010 07:51:49

  Publisher details

  Troubleshooting Windows Firewall

  Automatically fix problems of Windows Firewall, such as Windows cannot start the firewall service (0x5) Windows or Windows remote assistance does not work

  Package Version: 1.0

  Publisher: Microsoft Corporation

  You have problems with programs

• Error messages
• Recent changes to your computer
• What you have already tried to solve the problem

Hi Rickbsk,

You can check out the link and check the suggestions provided by scotty1294.

http://social.answers.Microsoft.com/forums/en-us/msestart/thread/05a63b12-1be9-4BD3-898e-64674c1e9afd

If you have not tried all the suggestions above, try and see if it helps.

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I click on the Windows 7 Upgrade nothing happens and the program does not start.

  This is on a Dell Vostro 1520.

  I'm trying to reinstall an os upgrade Windows 7 32 bit.

  I am currently using Vista 32 bit. I sell the dell so I formatted and reinstalled 32 bit Vista OS.

  The computer was running on an operating system Windows 7 before the reinstall.

  Now when I click on the Windows 7 upgrade it does not load.

  When I try to open since the reboot it will not open either.

  What now?

  Hey, Slugger,

  New installation leaves you a better overall installation,

  Installation custom own steps

  You can use a Full Windows 7 or upgrade disk to do a custom clean install. This will remove all of your programs, but you can save your files and settings on an external storage before doing so. You will need to reinstall all your programs after installing Windows 7. Here are the steps:

  1. start Windows Upgrade Advisor to see if there are known problems that might affect installation and if you can install the 32-bit or the 64 bit version of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 back up your files and settings. To avoid losing everything that you will need to save copies of all files, photos and other information that you want to keep an external storage device. Windows Easy Transfer is a free tool allows you to copy your files (but not programs) from your PC and then transfer them back after you have installed Windows 7. If you don't want to use Windows Easy Transfer, you can copy the files you want to keep on a USB stick or CD/DVD.
  http://Windows.Microsoft.com/Windows-easy-transfer

  3. find the discs original installation and license/product keys associated to programs currently on your computer because you will have to manually reinstall your programs after installing Windows 7. Depending on what you have installed, you may be able to download programs from the Internet.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)." Note: 32 to 64-bit requires restart and boot from the DVD.

  5. when Windows 7 is installed, you can use Windows Easy Transfer (or a different backup method you used) to restore your files & settings and use your installation disks to reinstall all your programs. Then you're done - take advantage of Windows 7.

  Steps 2, 3and 4 are recommended for Dell not offering systems not Windows 7 installed at the factory. Microsoft Windows 7 Upgrade Advisor to check that all of your software and computer components are ready for Windows 7. This application will scan your system and make recommendations on what to do before the upgrade to Windows 7.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?&docid=270659&doclang=en

• Captivate 6 errors: Missing file libwinpthread - 1.dll and the Application could not start correctly (0xc000007b) under Windows 2008 R2

  Hello

  I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested it, but the result is the same.

  1. I used AMEE (Application Manager Enterprise 3.1) to create the installation of the deployment via SCCM 2012 Package.

  Note that the current package works fine on Windows 7 (x 86 and x 64), but not on 2008 R2 error after I tried to launch the Captivate.exe application.

  The error indicates that there is a missing file: libwinpthread - 1.dll and if I copy and made a recording of the present. DLL file then he sends another error saying: on-demand failed to start correctly (0xc000007b) so he won't ever let me launch the application.

  2 now, if I install the package directly from the Original sources (CD) without creating any package AMEE after completing the installation, I have always the same error about the missing DLL file.

  Is there a fix or workaround to install 6 Captivate on Win2008 R2?

  Thanks in advance and greetings.

  This seems to be a generic question unrelated to Captivate. Here is a site that lists the possible causes.

  How to fix Libwinpthread - 1.dll is missing / not found error

  I don't know if their solution works well.

  Anthony

• I have a Palm Z22. It won't hotsync. It tries to connect, but then "problem, the connection between your device and the desktop could not be established. Please check your configuration and try again. »

  null

  Chillie wrote:
  Sorry I put my question in the wrong place.  I use Windows XP.  My Palm is a Z22.  I restarted my computer, if that's what you mean by a soft reset.  I have no answers-don't know my hot Sync Manager.

  A soft reset is performed on your computer Z22.  Look for the small "Reset" button on the back of the unit and press it with the tip of your pen or a paperclip.

  Reset draw your Palm.  Try to HotSync again.

  HotSync Manager is what your computer to connect to the computer Z22.  Do you see the HotSync icon in the lower tool bar?  If this isn't the case, you can not connect.  Go here:

  Start Manager button / all programs/Palm/HotSync.  This selection must load the HotSync Manager.

  I would help you with HotSync Manager, but you neglected to answer my question on "What version of Palm Desktop?"

  WyreNut

• The mouse and the keyboard does not - start or boot (s) failed to load i8024 system

  original title: salvation. Mouse and keyboard does not.  startup or start-up system (s) failed to load i8024.  ?? 1000 thank you!

  Sorry, don't know what information is needed. Still 1000 thanks.  XP family; the mouse usb.

  The following should be helpful.

  http://social.technet.Microsoft.com/forums/pl-PL/itprovistahardware/thread/cb03f7ec-95c9-406e-af07-cff86eaa9ee0

• I broke my Bios and the pc does not start

  I'm a gamer and was thrown my Bios operating system when my pc restarted to power up I have a screen white im course I messed up something in the bios and would like to know if anyone knows a way to fix it so I can put my bios failure to OC'ing {sick eaven slap my hand and say I was wrong to do this}.

  I was reading a forms that said there was a J something pass but my dosent owners manual show it to all...

  If anyone can help me id be full thank you

  Hello

  I suggest you to contact the manufacturer of the motherboard for help on how to reset the bios.

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The desktop icons are all the same and the programs do not start

  I try to reset my window and restart my computer and backup and restore nothing job all my icon are they open to the same program do not spoil the program which is going too

  I try to reset my window and restart my computer and backup and restore nothing job all my icon are they open to the same program do not spoil the program which is going too

  Use this tutorial
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  Highlight exe - executable application files.
  Click on the exe to download the reg file

  Follow the instructions in #1 to #7

  Highlight lnk - shortcut link (LNK) files.
  and do the same as above.

• Sync does not work and the application does not start

  Anyone has this same problem. Reinstall AdobeCC startup app still have no reason.

  

  Mac https://forums.adobe.com/message/5470608 spinning wheel

  -Similar to Windows https://forums.adobe.com/message/5853430