The amendment applies to a proceeding Eve in RAC environment

Similar Questions

• How to create a custom control for a button where the look apply to everyone else but not the Boolean text?

  Hi all

  I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.

  I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.

  How to create a master control of a button where the look apply to everyone else but not the Boolean text?

  Steve Chandler wrote:

  I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.

  As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.

  Alternatively, remove Boolean text and replace with legend

• my screen saver does not start. I select a screen saver, set the time, apply and nothing. This has happened before and corrected himself. Maybe one setting in another program? ___

  I select a screen saver, set the time, apply and nothing.  This has happened before and corrected himself.  Maybe one setting in another program? It's on a laptop.

  Hello jerrylumpe

  1. If you use an old mouse, try to clean it.

  2. you can have a running process in the background that keeps XP thinking that he is busy and so the screen standby does not start.
  Go to msconfig and uncheck everything you don't need, then see if the screensaver will kick in.

  Start/run and type
  Msconfig
  Ok

  Startup tab
  Keep the page open then click on the link below. It will tell you what are all the entries and see if you can disable them or not

  http://www.SysInfo.org/STARTUPINFO.html

  Read the key at the foot of the page, then click on "Here" at the top. Use the search box to check all your entries

  Try this too
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Line 51 left side. Click on "toggle".

  It could be that something is resetting the timer. For example, it does take much vibration to move the mouse a little, and which will reset the timer to zero. Something like that would be possible? Or a pet that walks on the keyboard?

• Programs can not be started, or no response after the computer was not awake mode "Eve"

  Dear Sir.

  My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

  Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

  Thank you very much!

  Eric

  Hi Eric,.

  You can follow these steps:

  Step 1: perform a clean boot to verify if an application or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Configure the power settings for keyboard, mouse, and other devices.

  a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
  b. click on the Hardware tab, and then click the properties button.
  c. click Change settings.
  d. click the power management tab and verify that the allow this device to wake the computer is selected.
  e. If "Allow this device to wake the computer" was not selected, select it and click OK.
  Follow the same steps for the mouse as well.

  If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
  connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
  problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

  Refer to this article for additional troubleshooting steps.

  
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The MTP drivers not to proceed with the installation for my Samsung Galaxy S2

  The MTP drivers not to proceed with the installation for my Samsung Galaxy S2. I'm not able to use Kies for this reason.

  The MTP drivers not to proceed with the installation for my Samsung Galaxy S2. I'm not able to use Kies for this reason.

  It is more a question that you should study from the other end (Samsung/Android) to this end (Windows).  Hardware and software support for any device always has (probably always will be) from the manufacturer of the product.  They did, they decide what software/drivers that they provide and how they provide.

  For most of the devices like this - just use it as a USB hard drive works well.  ;-)

  http://androidforums.com/Samsung-Galaxy-S2-international/476128-how-do-i-sync-my-Samsung-Galaxy-S2-my-computer.html

  http://samsunggalaxysforums.com/showthread.php/3468-connecting-to-Kies-MTP-USB-driver-failure

• Inspect traffic over the policy apply

  Hi people

  I use Virtual Center of 64-bit version 5.3.1.4 defense and I'm trying to understand this option under the access control strategy - Advanced tab. What I try to do, is to allow the loss less than policy changes, at the moment with this option enabled, there are a few seconds interruption of network traffic when the policy is applied. I use inline module of firepower on an ASA5525 by the way. It seems natural that there should be an interruption while the configuration is reloaded on an online service, but the manual is not very clear about the box.

  Someone has a better idea what is this option?

  Concerning

  Fredrik

  Hi all

  Let me add in it.

  Power module of fire ASA because of changes in policy or any other reason causing snort recharge. Feature 'feature inspect during the policy applies"does not work for the SAA. The reason behind this is the architectural difference between the devices of firepower (material of the series 7000 and 8000) and modules ASA firepower. In devices, there is a charging wire that supports policy changes without affecting the current treatment of traffic.

  Old behavior (5.4.0.4, 5.4.1.3 and before)

  ASA in rescue mode is based on the heartbeat sensor dplane response to work around the packages. But what snort process restarts due to policy change or driver of any other ground of the sensor responds to the heartbeat ASA and ASA never understands if Snort processes are declining. In this case, ASA continue to send packets to sensor (with Snort down) as well as the packages are removed causing a breakdown of small network size.

  Ill CSCuv91730 (for ASA) and CSCuu68273 (firearms) were introduced to solve this problem.

  New behavior (5.4.0.5, 5.4.1.4 and later versions)

  With the new behaviors introduced ASA will send rescue configuration to sensor backplane header. This information is sent to basic package by the context. ASA expects this sensor to return the package if the flag is set, and even Snort fell. Then, when ASA will receive the same package the snort is down.

  ASA press release fixed side has been published on ORC, but we are still waiting for Sourcefire side fixed (it was fixed, we are waiting for fixed output but I guess a fix is available for this.)

  Thank you

  Dinkar

• How to reduce the "offset applies"?

  Hi guys,.

  I use Oracle Dataguard on 11 GR 2 Oracle database with configuration of Broker:

  DGMGRL> SHOW CONFIGURATION;
  
  Configuration - NAME_DG
  
    Protection Mode: MaxPerformance
    Databases:
      nameprod  - Primary database
      namedg    - Physical standby database
     
  Fast-Start Failover: DISABLED
  
  Configuration Status:
  SUCCESS
  
  
  
  
  

  It's my time to delay apply:

  DGMGRL> SHOW DATABASE NAMEDG
  
  Database - namedg
  
    Role:            PHYSICAL STANDBY
    Intended State:  APPLY-ON
    Transport Lag:   0 seconds
    Apply Lag:       26 minutes 53 seconds
    Real Time Query: ON
    Instance(s):
      NAMEDG
  
  Database Status:
  SUCCESS
  
  
  
  
  

  I want to reduce the time 'applies', it is possible? Do you know a way?

  Thanks in advance.

  Hi guys, certainly the day before newspapers of recovery have been the problem. I created the missing waiting for redo logs (on the database pending), then the 'delay to apply' off to zero.

  Kind regards.

• I want to change country in my account to complete the purchase of programs process correctly... The amendment does not

  I want to change country in my account to complete the purchase of programs process correctly...

  The amendment does not

  Please see the change of the country associated with your Adobe ID.

  To change the Adobe ID, you can check your Adobe ID account management

  Hope this will help you.

  Kind regards

  Hervé Khare

• find the patches applied on EMP 11.1.2.1

  Dear all,
  
  I want to know the fixes applied on the system I'm on 11.1.2.1,
  
  what I did to achieve
  
  Open cmd and negate to 'C:\oracle\Middleware\EPMSystem11R1\OPatch '.
  
  Has issued the order "opatch.bat lsinventory - oh C:\oracle\Middleware\ - jdk C:\oracle\Middleware\ jdk160_21.
  
  The results are below
  
  "C:\oracle\Middleware\\bin\java.exe could not be located. OPatch cannot continue!
  
  Successful OPatch. »
  
  This is the version of java that creates a problem, or I use the wrong command?
  
  Kindly help
  
  Best regards & wishes

  Try

  opatch.bat lsinventory - oh C:\Oracle\Middleware\EPMSystem11R1 - jre C:\Oracle\Middleware\jdk160_21

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Highlight the manually applied fonts

  Hi all

  If the composer applied manually fonts, how can highlight using javascript.

  Or

  Instead of Sabon applied Helvetica manually how to highlight using javascript y at - there are not possibilities.

  Concerning

  Hurix

  @Hurix, ignore the earlier and try below.

  Hi Hasvi,

  Try this.

  paragraphs var = app.activeDocument.stories.everyItem ().paragraphs.everyItem () .getElements ();

  try {}

  app.activeDocument.colors.add ({name: "Red", model: ColorModel.process, colorValue:[15,100,100,0]});})

  }

  {catch (e)}

  for (var i = 0; i)<>

  {

  for (var j = 0; j)<>

  {

  If ([i] paragraphs mentioning [j].appliedFont.fontFamily! = paras [i].appliedParagraphStyle.appliedFont.fontFamily)

  {

  paragraphs [i] mentioning [j] .fillColor = app.activeDocument.swatches.item("Red");

  }

  }

  }

  Kind regards

  Cognet

• Overloading the button apply IR

  Hi all
  
  I'm trying to run a piece of javascript validation, in particular when the user clicks the button apply columns Select IR shuttle. Only if the validation is successful, then I want the refreshment of the IR to move forward.
  I tried the below code to unbind and then bind, but it's not working for me report the GET refreshed.

  $("#apexir_SHUTTLE_LEFT").live("click",function(e){   // just start with the left single click
  
  $("button.apexir-button").each(function() {
  
  if ( $(this).attr('value') == 'Apply') {
  
  $(this).unbind('click').bind('click',function() { alert('disabled'); return false; });  // I can see the alert, but I am unable to stop the default JS associated with the apply button.
  
  }
  
  });

  Can someone please advice me on how I can achieve this.

  var ori_Finished_Loading = gReport._Finished_Loading;
  gReport._Finished_Loading = function(){
     $("#apexir_btn_APPLY").attr('onclick', '');
     $("#apexir_btn_APPLY").bind('click', function(){
     if($('#apexir_SHUTTLE_RIGHT option').size()>10){
        alert('gt than 10');
     } else {
        gReport.column.display();
     };
     });
     ori_Finished_Loading();
  };
  

  Your code does not work because of the code onclick in html on the button 'apply '. Is no question that you are a link, click events, the onclick is still there and will be executed. You can not remove onclick by unbind, which removes only the managers linked by bind().
  Open the select column triggers an ajax call and retrieves the html, which is then injected into the document. We need a way to monitor the realization of the said ajax call, because you can not manipulate the DOM elements that do not yet exist...
  FinishedLoading is a function of interactive reports that fires at the end of each triggered by a report interactive ajax call. The afterrefresh event is NOT fired for each ajax IR call!

  So, I'm storing the original function of FinishedLoading in a variable.

  var ori_Finished_Loading = gReport._Finished_Loading;
  

  Right now I have replace the function in gReport with my own code.

  gReport._Finished_Loading = function()
  

  Remove the onclick of the button html code apply.

  $("#apexir_btn_APPLY").attr('onclick', '');
  

  Bind a click to the button event. Direct is not necessary here, the event will be bound to the element of each column select time is used (and the item is removed from the DOM, so no worries)

  $("#apexir_btn_APPLY").bind('click', function()
  

  In this function, you can then test the size of the shuttle. Be sure to provide the default code which will apply the selection of the column when it is valid.

     if($('#apexir_SHUTTLE_RIGHT option').size()>10){
        alert('gt than 10');
     } else {
        gReport.column.display();
     };
  

  Finally, the original FinishedLoading should be called too! (otherwise for example ajax loader graph will not be hidden)

  ori_Finished_Loading();
  

  Finally, of course, a caveat: no guarantee this will continue to work between the different versions.

• How can we find the list of the patches applied to the hyperion products

  Hello
  
  How can we find a list of the patches applied to products hyperion HFM, Essbase, HFR... etc.
  
  If we can go forward with Opatch, can someone share it please the procedure of obtaining the list of applied hotfixes using this.
  
  Thanks in advance
  ARSV

  If your system is installed in D:\Oracle\Middleware

  D:\Oracle\Middleware\EPMSystem11R1\Opatch\opatch.bat lsinventory - oh D:\Oracle\Middleware\EPMSystem11R1 - jre D:\Oracle\Middleware\jdk160_21
  or
  D:\Oracle\Middleware\EPMSystem11R1\Opatch\opatch.bat lsinventory-detail - oh D:\Oracle\Middleware\EPMSystem11R1 - jre D:\Oracle\Middleware\jdk160_21

  Pablo

• How to find the list of the patches applied without using the inventory?

  Hello
  
  I asked this question once.
  How you will find the list of the patches applied to the House of Oracle database without using commands like opatch lsinventory - detal etc...
  I think that registry$ story is a view from where you can find the list of the applied patches.
  But I think that he understands all the bug fixes, stand alone or one-off patches. It will mainly list on the CPU patches applied (correct me if I'm wrong).
  
  Thank you
  Fany

  Salvation;

  Please read
  You can delete $ORACLE_HOME/.patch_storage Directory? [403218.1 ID]

  Respect of
  HELIOS

• How to view the keywords applied to a photo?

  Is it possible to display the keywords applied to a single photo? I know that I can browse the complete list of keywords in the search of tick marks, but (and I think of the EP) is it possible to see a short, simple only these keywords list applied to a selected photo?

  Thank you

  John

  Hi John

  Select a thumbnail, and in the right panel, click the tab Keywording (not list of keywords) and you'll see the keywords attached to the individual photo.  You can also add, delete or modify here.

• Need to get all the text of the particular applied character style

  Can someone help me I need to get all the texts of the particular applied character style

  app.findTextPreferences.appliedCharacterStyle = 'style1 Character. "

  app.findTextPreferences.appliedCharacterStyle = 'style1 Character. "

  var mf = app.activeDocument.findText ();

  var myText = ";

  for (var i = 0; i)<>

  myText is myText + mf [i] .silence;.

  }

  Alert (MyText);