The article begins to run...

Hi all

I created an application for iTunes with Adobe Folio. My problem is when I move between the article once on my iPad, Article is not jump at the beginning that he always starts where I left the article. Even when I close the application completely and open it again, it jumps to the point where I was before. I would always start at the beginning of an article, how do I fix?

Thanks for your help

This is how it works. If you want to reset the folio, you can therefore by ballpoints

the NAV and triple bars typed on the title.

Tags: Digital Publishing Suite

Similar Questions

  • When I close the lid on my laptop, random programs begin to run.

    1. so here's the deal:

    I have laptop Dell XPS L502X in Win7 Pro;

    b. out of nowhere, and all of a sudden the next irritating problem started havoc. When I close the lid on my laptop at night, random programs begin to run. The desktop icons move into other folders or the trash. It changes the size of the larger icons... it changes even the settings 'snap to grid '.

    2 until you tell me to turn it off or put it to sleep extended mode... I need to let you know that I need to leave the mobile "awake" so that it downloads my incremental changes to Carbonite cloud, as well as my local/resident of mirror [Carbonite] drive.

    3 oh yes: I also went up to disable the 'mouse' integrated glidepoint device, too: same result... madness.

    4 I jumped every hoop I can think... to run the diagnostics runs each available from Norton 360 scan... Online / remote - to both Norton AND Microsoft support.

    Help!

    Original title: HELP HELP HELP! My computer has gone NUTS! When I close the lid for a short period of time, it starts to launch/open/program files on my desk... Ouch!

    Hi Benjamin,

    I can understand your annoyance in that regard. I appreciate your effort posting this query to the Microsoft Forums.

    I would be grateful if you can provide us with information to help us better understand the issue.

    1. Did you change in the computer before this problem?
    2. What types of files are open when you close the lid of the laptop?

    Please provide the Event Viewer logs to resolve the issue and the screenshot of the desktop icons.

    Check out the link to check the Event Viewer logs.

    https://support.Microsoft.com/kb/308427?WA=wsignin1.0

    Note: However, the link is good for Windows XP, you can check the link to check the computer for Windows 7 Event Viewer logs.

    I suggest that we do a system restore to last good configuration.

    You can check the link below to perform a restore of the system.

    http://Windows.Microsoft.com/en-us/Windows/system-restore-FAQ#1TC=Windows-7

    Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    I also suggest you to see the link to create a restore point.

    http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • Linux silent installation stops at > begins to run the configuration wizards

    I use putty to perform a silent installation of db oracle 10g on my remote (redhat) server through the command line:

    . / runInstaller-silent - responsefile /tmp/enterprise.rsp

    It works fine until you reach > start to run the configuration wizards, where I get no additional response or even errors, it crashes just saying that, here's a summary:

    --------------------------------------------------------------------------------------
    Current installation (Wed Oct 29 18:06:32 CST 2008)
    ............................................................... 11% of fact.
    ............................................................... 23% of fact.
    ............................................................... 35% of fact.
    ............................................................... 47% of fact.
    ........................................... 55% of fact.
    Successful installation

    Bind in progress (Wed Oct 29 18:08:54 CST 2008)
    . 55% of fact.
    Link with success

    The current setup program (Wed Oct 29 18:10:07 CST 2008)
    .................... 100% of fact.
    Successful installation

    End of the phases of installation. (Wed Oct 29 18:10:13 CST 2008)
    Begins to run the configuration wizards
    ----------------------------------------------------------------------

    What should I do to solve this problem and the installation completes successfully?

    Hello

    the first on the ps and grep commands, you are right on the line 1, which is the command line:
    to avoid that you can do
    PS - DTS | grep-i runinstaller. grep - v grep

    After you have used the user fuser, it gives you the process id 32275

    so with the PID number you can do:
    PS - DTS | grep 32275

    This will give you the application that is currently running and pointing to the log file.

    Although fuser * shows that the log files are still used?
    Yes it is but the name of the process is different. so try to grep for your PID number.

    Sorry, I always do silent installation at the beginning and clone the database after.

    I remember that I used the wizard dbca-silent - responsefile /local_dir/dbca.rsp
    Also the netca (network configuration assistant) is performed during installation?

    What should I do to solve this problem and the installation completes successfully?
    You want to run the netca and the dbca after the software is installed?

    I do not use dbca.rsp because I did not choose the advanced configuration of database in my enterprise.rsp, and IE that using dbca.rsp is just incase I choose advanced configuration which is number = 2.
    So what settings do I need to switch to the runInstaller, am I still missing something that prevents installation stuck without giving answers or errors?

    After the installation is carried out with the silent mode, can you please check which process is still written on the installation log files?

    Otherwise, try for example running sqlplus (control that all you stuff environments is implemented as a path, ORACLE_SID, ORACLE_HOME, etc...)

    This command works?

  • I tried to update, but sites still say I use an older version. I downloaded the latest version and run the program to "downloads".

    Sites like Pandora and gmail keep telling me that I use an older version of Firefox. So I followed their links to update, download the latest version and run it from my downloaded programs. But it doesn't seem to work as the sites always give me the same message.

    Something that you have changed your User Agent or prevents your User Agent to update with the new installation/update of Firefox. I suspect it's Fast Browser Search, which is shown as part of the User Agent. To get rid of Fast Browser Search do the following:

    1. Closing of Firefox (Firefox button > exit OR File > Exit)
    2. Open the Windows XP Control Panel and remove/uninstall "Fast Browser search protection" and "Fast Browser Search" (MyWebTatoo)
    3. Launch Firefox

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • FF4 does not show quick reading of the articles of the site functionality

    On some sites such as huffingtonpost.comnews, the main items are associated with a picture. When you place your cursor on the upper right corner of the photo, a 'Quick read' option is displayed. By clicking on which displays a brief summary of the article. The quick play option appears in FF3 but not now that I installed FF4.

    It seems to work for me, see screenshot.

    Try to upgrade to the latest version which is 4.0.1 by clicking help | About Firefox | Look for the updates.

    If the problem persists then, try running Firefox in Firefox to solve the issues in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

  • Games - the Sims 3 Deluxe running on Windows 7?

    Can Sims 3 Deluxe to run on Windows 7?

    Also all the Myst games work on Windows 7? I heard that only the 10th Anniversary Collection Myst and Myst 4 will run on Windows 7.   I feel that a lot of games does not say on the back of their box of which they run on Windows 7. Many games say they are running on Windows XP and Windows Vista (epecially the newer games). Help, please! Hope someone can answer my questions.

    Putting the issue in the context of games as well.

    If the game is compatible Vista, it should work.

    Windows 7 Compatibility Center
    Check if your application software or hardware is on the list
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Material:
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

    Software:
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=software

    You can also try the compatibility mode:

    You can find more information on compatibility modes in the articles below:
    http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • Failure of Windows Update: Windows update cannot currently check the updates, because the service is not running. You may have to restart your computer.

    Im running windows vista 32-bit edition Home premium. I have not had my computer lately ive been let my sister use it. IM afraid that even if she was using it she got a virus because now I can't update windows, my microsoft security databases can not be updated either. Ive never had windows defender and essentials of security on that because I don't do much with this computer. Can someone help me understand if I need to reformat or if there is just a problem with my windows update?

    The best approach for a very infected PC
    is a 'Clean Install' you can never be 100% certain that every last bit of the infections have been removed.

    That said if you have time and want to see how you can go to eliminate viruses, malware and bots then read on.

    Start by reading the following information of the Virus removal: (you must first install and run MalwareBytes)
    Provided by: Malke - MS MVP:
    http://www.elephantboycomputers.com/page2.html#Removing_Malware

    For me on a PC friends who had more than 60 infections and there is no CD of restoration and the key code has been lost, the article above "Malware Bytes", "AVG Free" and Norton NIS 2010 has been around.

    NIS 2011 trial software:
    http://www.Symantec.com/Norton/downloads/index.jsp

    (Note: the trial download Norton NIS requires a credit card, read the terms 'Opt Out' before you start)
    In addition, a second pass using Malware Bytes and NIS seems to have removed all infections.

    AVG Free:
    http://free.Avg.com/

    Avast:
    http://www.avast.com/index

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Unable to defragment error: (C) defragmentation has been abandoned because of contradictions that were detected in the filestem. Please run CHKDSK or SCANDISK on (C) to fix theses inconsistansies

    Original title: error Defragmenter

    Whenever I try to defragment I get a message saying the following... to come (C) defragmentation has been abandoned because of contradictions that were detected in the filestem. Please run CHKDSK or SCANDISK on (C) to fix theses inconsistansies. Then run disk fragmenteur.

    It may be something to do with Microsoft because it says I don't have add on, but I don't know
    I have windows XP, if that helps.
    E-mail address is removed from the privacy *.
    Thank you very much

    Hi IainFisher,

    Thanks for posting in Microsoft Communities. Of the description of problem I can understand that you are not able to run disk defragment. Provide the following information to understand the issue:

    ·         Did you do changes on the computer before the show?

    ·         Reason why you want to run disk defragment?

    Follow these methods.

    Method 1: Follow the steps in the article.

    How to defragment your disk Volumes in Windows XP

    Method 2: Follow the steps in the article to run the check disk for errors.

    How to perform disk error checking in Windows XP

    Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

    I hope this helps.

    Thank you.

  • I'm not abe to do the Windows updates, message warns me that the service is not running

    I can't do an update of windows due to a message saying that the service is not running.  What this means and how can I solve the problem.

    Hi EmogeneHutchinson,

    ·         Did you do changes on the computer before the show?

    ·         You install updates?

    ·         What is the full error message?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click restart to restart the computer.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

  • When I try to defragment my hard drive, the wil of defragmentation runs do not

    I do not use a 3rd party defrag program.  Only the windows defrag and it has always worked in the past.  I tried guest this morning, but so far no defragmentation has occurred and it has been over 2 hours.

    Hello

    ·         Which is the minimum amount of space on the hard drive?

    ·         Were there recent changes made on the computer before the show?

    Follow these methods and check if that helps:

    Method 1:

    I suggest you follow the troubleshooting steps form the article and check if it helps.

    Disk Defragmenter does not work on a Windows XP-based computer

    http://support.Microsoft.com/kb/922379

    Method 2:

    Sometimes Check disk to check for and repair errors running file system can solve the problem.

    How to perform disk error checking in Windows XP

     http://support.Microsoft.com/kb/315265

     

    Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  • Error "Windows cannot check for updates because the service is not running.

    I am using windows vista 64-bit ServicePack two on my laptop. I recently had to install new hard disks. Since then, Windows update does not work. When I check the updates dialog box appears indicating that Windows cannot check the updates because the service is not running. I used the Microsoft fix - it tool, and it recognizes that there is a problem, but cannot fix. History of the update is completely empty. I would appreciate any ideas on how to solve this problem.

    Please read this article:

    http://support.Microsoft.com/kb/2730071/en-us

    Another suggestion is maybe disable the updates of Windows

    Reset.

    Activate the Windows updates.

    Try again. (Worked for some)

    http://Windows.Microsoft.com/en-AU/Windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=Windows-Vista

  • Windows Vista desktop refreshes, said the service is not running

    OK, I'm not very good with computers but learning a lot since mine has messed up. I have a desktop running Windows Vista. The computer his car slowed dow a LOT recently. I ran antivirus and malware. She had detected things and withdrawn. Still not making a faster. I tried to run an update and it says that the serivce is not running and the need to restart the computer. I did it several times and it always remains the same. Also the antivirus to update custom because he says there is a problem with the internet... but I'm not having any problem getting on the internet other then its slowness. Somewhere tells us about the service names and default paths and another says to format and reinstall Windows... anyway I have NO IDEA of what I need to do. Would appreciate any help. This is a computer that I use every day. And an antivirus may have expired between getting a new, I do not know if what counts. Also it is not updated since the beginning of September, because even the automatic update will not work. Yet once any help will be appreciated. Thanks in advance. Sorry if it's a little confusing because I don't know how else to describe this.

    See if this helps:

    http://support.Microsoft.com/kb/2730071

    Error: Windows Update cannot check the updates, because the Service is not running

  • Hard drive runs faster, even if the programs do not run

    Original title: computer is driving me crazy.

    HDD works almost non-stop faster and slower more fast and slower without running, close all programs and restart and it immediately starts programs known

    Hi Randy,

    I suggest to go to the following website and check if it helps.

    Method 1:

    Optimize Windows Vista for better performance

    http://Windows.Microsoft.com/is-is/Windows-Vista/optimize-Windows-Vista-for-better-performance

    Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Chkdsk WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

    Method 2:

    Step 1: Safe mode.

    Check the mode without failure in question.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If the computer works fine in safe mode, and then follow step 2 and check.

    Step 2: Perform the clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

    Hope this information is useful.

  • Cannot install message of updates that Windows Update cannot currently check the updates because the service is not running

    Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64)

    I get the message: ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "I rebooted without change.

    I have Vista 64-bit with installed MSE and it cannot update its virus database.  I have also Windows Media Center put up a TV and may not be able to download an updated Guide.

    Can someone help me please?  I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking.

    I found a few other forums similar to my problem, but I don't know that they are the same as mine.  I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem.

    Thank you!

    Hello

    1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages?

    2 did you do changes on the computer before the show?

    Method 1: Run the update utility

    See the following site:

    Problems with installing updates

    http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates.

    Method 2: Start services

    Make sure that the following services are started:

    a. Windows Update

    b. Background Intelligent Transfer Service

    c. Cryptographic Services

    To do:

    a. click Start, type services.mscwithout the quotes and press enter.
    b. double-click the service and under Service status click Start, if it is not started.

    Method 3: Reset the update components

    See the following site:

    How to reset the Windows Update components?

    http://support.microsoft.com/kb/971058.

    Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

    Method 4: Run the fixit

    See the following site:

    The problem with Microsoft Windows Update is not working

    http://support.microsoft.com/mats/windows_update/.

  • Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    I am currently using windows 32 bit vist

    I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

    Suggestions?

    Hello

    1. have you made changes on the computer before this problem?

    2. which antivirus app do you use?

    I suggest you try these methods and check.

    Method 1:

    Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

    Follow these steps:

    a. click the Start button, click computer.

    b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
    Where 'C' is the drive of operating system
    c. delete the log file, and then restart the computer and check the issue.

Maybe you are looking for