The audio editing speaker volume

Similar Questions

• My saved Windows Movie Maker Project open with video clips in the Audio editing panel and vice versa (NOT as it was created). Can I move them back where they belong?

  After days of the creation of a filmmaker 'project' I 'saved project' one last time, then reopen and publish a movie.  All my video Clips (phtotos) now appear in the Audio editing / music along the bottom with only a video clip standing in line of the video of this 'slide show' of 90 minutes.  Is it possible to move these clips to which they belong without having to recreate the whole project?

  What happens if you try to read the project in Movie Maker?

  Looks like your project .mswmm file is corrupt (starting
  Perhaps more than the best approach). The project can be as far
  too big and too complex to publish (save) with success as a
  video file.

  I suggest that you create several small projects
  and publish (save), each of them in the. WMV video format
  and then re-import the collection. To combine WMV files
  in a single movie.

  You can also import collection. Clips WMV to DVD
  Manufacturer and each clip, would have become a scene (chapter)
  on the DVD.

  The following article is maybe worth a visit:

  Movie Maker - how to divide a project complex smaller?
  http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm

• The Smartphones blackBerry speaker volume

  Help, I have problems with my speaker volume when on the phone. I turned upward all the way, and I can barely hear the other person. The sound of the keyboard is normal when I push the buttons, but I can't hear the other person or voicemail via the speaker. The speakers work very well for the songs. Any thoughts?

  Give a soft reset to your BlackBerry by removing the battery for 30 sec. If that does not solve the problem then consider a device software reinstall or upgradation.

• 8. do not allow me to move the markers of the slide in the audio editing of slides in Captivate

  Support - seems to work sometimes, but sometimes not. Today, not! I'm a software simulation. Then save auido to be distributed across multiple slides. But in the audio editor, says "you have reached the minimum display time" whenever I try to move the markers of slides! GRR! all solutions?

  Hello

  In the case of the image you provided, the audio itself seems to be long of 2.5 seconds. So Captivate you cannot change the slide duration to be shorter 2,5 seconds, because the associated audio video needs this time to complete. The only way to make this shorter slide is to edit the audio clip, so his is shorter.

  See you soon... Rick

• Save button missing in the Audio edition

  I use 6 Captivate.  I want to change the audio on a couple of slides at once.  My approach has been to select the first slide, I want to change and then press CTRL + click on the second slide.  Then I go to the top of the screen and click on Audio > slide.  The edit box appears and I can edit, but I can't save.  I can't click anything else in the program selection until I record, so I have to stop the whole program, which makes me lose the work.  Is there a better process for editing a few slides at once?  Why did the "Save" button missing?

  Thanks for your help.

  Hello

  Greetings from Adobe.

  Please try to recreate the preferences of Adobe Captivate 6. First close 6 Captivate.

  For Windows -.

  For Captivate 6 64 bit - go to the C drive > Program Files > Adobe > Adobe Captivate 6 x 64 > utils > run the CleanPreferencesWin.bat file by double-clicking it.

  To Captivate 6 32 bit - go to C:\Program Files (x 86) \Adobe\Adobe Captivate 6 (32 bit) \utils > run the CleanPreferencesWin.bat file by double-clicking it.

  For Mac OS- on Finder > go > go to folder > Type-~ / Library go to preferences and rename the Adobe Captivate 6.0 Adobe Captivate 6.0_oldfolder.

  Launch 6 Captivate and try to edit audio on leaves.

  Kind regards

  Ajit

• Satellite A-L50-1CU - no separate for the headset and speaker volume sliders

  Why there is no possibility to control the volume of the headphones separately? I risk my ears (seriously) every time I use headphones, due to the low efficiency of the speakers...

  Any suggestion?

  To be honest I do not understand your problem. You can control the volume level using the F9 and F10 keys or Windows volume mixer.

  Reduce the volume level before you connect headphones and speakers and I hope that there will be no risk to your ears. ;)

• Why can't I export the audio edited hearing in Premiere Pro?

  How to fix the box gray? I can't click on "export to Premiere Pro.". "

  Thank you!

  Export of Premiere Pro is an order of menu only multi-track.  If you send a clip to the hearing, then just save and return to the first update in the timeline of the sequence.

  When you send one or the clips at the hearing, first performs a rendering operation and replace it, generating a new clip and place it on the timeline.  Hearing opens the file for editing, so that first it leaves open for reading.  When you switch to the first, it checks if the clips have been changed and updated the waveform.  There is no need of what whether export returns with this method because the files are already there!

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• How can I make the audio clips 40 all the same volume?

  Hello, all!

  I finished a video for general guidance to new employees in the Yellowstone National Park and am close to be finished!

  I created the video in the first Elements 9 with some video footage and pictures still mixed.  (Yes, I tried to "Ken Burns" it... it laughing out loud if he saw my version!)

  I brought most to individual WAV format. clips that I've inserted into the audio editing under each video segment.

  I have about 40 audio clips, and even though I used a decent microphone, I still find that every clip has a slightly different volume that is really noticeable when the DVD-video play on TV.  I realize I should have made an effort to keep a standard distance of the mic when recording.   Hindsight is 20 - 20.

  I tried to change the volume on each clip to make them all the same volume, and it makes me a little crazy.

  Is it possible for me to grasp all the audio data at some point and make an adjustment that would make each of them the same volume?    I tried CTRL-A and then to 'normalise' on this topic, but it seemed to do very little / or no difference when viewing.

  Any advice would be really appreciated!

  Signed, the daughter of solitary creative video in Yellowstone.

  Thank you, Hunt!    I read the article.

  Have a great day.

• Audio Edition - not available in the 30 day trial?

  I have been using / learning Captivate 4.0 via 30-day trial (my full version is on order). I wanted to try audio editing capability; However, when I opened a blade that has audio and try to change thanks to select edit-audio, the audio Edition menu never happens. If this could have something to do with:
  (1.) the fact that it is the demo version?
  2.) I am trying to edit an audio file from one of the pre-loaded music files (corporate4) since I've not yet recorded of audio myself yet.
  
  Thank you.

  Jean,

  Try changing the audio for the project. Same result?

• Reinstall the audio and audio device.

  I have a big big problem to find the audio driver and volume control. I was remove some software from "Add or Remove Programs" and I accidentally deleted the audio driver that is the volume of the computer. Day after tomorrow, I went on youtube and and listened to some of my favorite tunes, but I was surprised because I couldn't hear anything in my headset or speaker. I wonder why and I was wondering if I should check the volume to the taskbar control and then there is no volume control icon, as it disappeared. Then I went to the control panel to check the 'sounds, speech and Audio devices"If there is a problem going on there. Then I click on "sounds and Audio devices". and then a window pops up where it says "sounds and Audio devices properties, then I saw that there is"No Audio device".» Now I don't know what to do to recover the sound and audio device to my computer. I tried to install some drivers for my computer, but it does not help. And the only thing I can think of right now is to contact a technician to fix this problem. Please help me. What can you advice that will help my computer to reinstall this device, I will gladly appreciate it. Please!!!!!!!!!!!!!!!!!!!!!!!!!!! Help me!!! ..... :(

  Hi DellaFitzsimmons,

  The audio device show in Device Manager? When you have lost her? If you haven't already, try to update the audio driver.

• New engine audio speakers are volume levels asymmetrical, even if I double checked all the connections and checked through balances of speaker system preferences. Help, please?

  I have an old desktop iMac to less than 1 year, I've upgraded to El captain of Yosemite.  Just fine, except the quality of the internal speakers.  Yesterday, I received speakers brand new engine audio 5 +.  Hooked by instructions.  Between the speakers volume levels are completely unbalanced. His active in Preferences system - balanced in the Middle, 50-50.  Verified in applications/utilities-audio MIDI output, everything is correctly set.  I can get pay only by the reduction in volume of the speaker on the right to almost nothing, but then I have no more volume than offer the internal speakers.  Any solution would be greatly appreciated.

  You use the audio output from your Mac an entry in your speakers or you cross an external DAC first?

  I also have the A5 speakers +, and I also use their USB D1 DAC which then audio output runs to the speakers.  Yosemite was a constant headache with my setup, but appears to have been eliminated with El Capitan.  I installed OSX to El Capitan, as well as later make a clean-install of El Capitan purely for my wanting a clean and in both cases, the sound system was very good.  Those who speak of fantastic, better that I have owned yet.

  Can you be more specific with how your output of iMac is done?  As usually, always check, then check your connections in your speakers and make sure that the audio cables are intact and not frayed.  If you use the headset, ensure that the headphone cable is robust and doesn't look like not to is damaged/twisted.

  You can consider getting the audio DAC AudioEngine to manage your Mac, as it is much better than one built-in that comes in your iMac.  I use it on my new iMac 5K that I received a few weeks ago.

  http://audioengineusa.com/store/digital-audio-converters/D1-24-bit-DAC

• Windows 10 - speaker volume slider Audio settings has no effect

  I don't know which version of Skype broke this setting or if it actually happened on the upgrade to win 10 and I didn't notice. However, since a few months now, the audio signal coming on a call is much too hard. Open the Audio settings and the speaker volume setting has no effect. I can't find any reference to this in aid of Skype or in the community. Does anyone have the answer?

  The question could be discussed here:

  http://community.Skype.com/T5/hardware/my-microphone-volume-is-automatically-adjusted-by-Skype/m-p/4...

  Recently what happened to me once or twice, and what helps is to clear the track record.

  http://community.Skype.com/T5/hardware/my-microphone-volume-is-automatically-adjusted-by-Skype/m-p/4...

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• iPhone 6 s the ear speaker volume is low

  iPhone 6 s the ear speaker volume is low, I turned the volume all the way to the top and there is still no improvement and the volume of the phone's normal when on a call by speaker and earpods. Problem volume level is only known when using the earphone.

  Hello

  Follow the steps here:

  If you do not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple Support