The audio service does not work... help!

Similar Questions

• HP G71-449WM. Windows 7 64-bit. "The audio service does not work.

  I downloaded all the updates that I can find anywhere. My roommate has deletion of things on my laptop for 'performance' and now I have no sound. I go to my device manager in the computer and it is says my IDT HD audio CODEC works correctly. And my Intel(r) High Definition Audio HDMI does not work correctly. What should I do to get his new? The the small speaker in the far right of the task bar icon has an X on it, as she was mute. BUT it's not. Help? /

  Hello

  Open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all displayed as status = started and the Startup Type = automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  Kind regards

  DP - K

• Audio service does not work, error 0 x 80004005: unspecified error

  I have problems with my laptop in regards to the audio service does not. The sound icon has an x on it and ran the SCP prompt automatically update/fix drivers without success (may have spelled promot hurt, but it was the solution to many similar forum messages). I also tried to uninstall the audio driver and put it back, however when I run the driver installation an error message appears and says that Windows Audio is not running and needs in order to perform the installation. I went to the system administrator and seen the services menu and went to windows audio properties. I tried from the program and the error message "error 0 x 80004005: unspecified error" comes up. All dependent services for the Windows Audio are running, so I came to a dead end. The only thing I can think of that would make the audio not working do not is my battery. My battery is in poor condition and needs to be replaced, so I always us the AC cord to power the computer. Depends on Windows Audio battery somehow or something of this nature? If so, is there anyway around this until I can buy a new? Thanks for your help. Clay

  You say you have Vista - therefore, you the Vista drivers, drivers for W7!

  See you soon,.

  Jerry

• My Acer TravelMate 3273WXMi audio service does not work properly. I use an Audio_Realtek_6.0.1.5413_VistaX86

  Hello
  My Acer TravelMate 3273WXMi audio service does not work properly. I use an Audio_Realtek_6.0.1.5413_VistaX86 on W7 driver. The problem is no outside speaker and not micro.

  2 things:

  -Why you are using Vista drivers with W7? No, there is no specific driver for W7 (search the website of Acer support for your machine).
  -you will never get full nombreauses for help, these drivers.
  See you soon,.
  Jerry

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• My audio service does not work - I can not use my pc on mode safe by minegold. How to return to normal

  my pc starts only in safe mode and I like the audio service is not running.

  for example, when I play something with you tube, I can see the video, but

  without sound.

  Hello

  Audio service does not work in Mode without failure.

  The services are very limited in safe mode.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• "The Audio Service is not working" - read a few other threads but without success

  Hello

  Thanks for any help I receive in advance,

  my sound was working perfectly last night, done a windows update and resolve now them audio custom work and cannot solve the problem with an automatic, the message I get is:

  Problems found: one or more audio device does not work currently not fixed

  Any help would be appreciated

  Hello!!! can you tell me you have a single machine windows7 or mutiple.

  I suggest two things here

  (1) try to copy and merge the audio of an another windows7 home premium or better service

  You can do this by going into the Registry Editor (make sure that the other computer is also a 32-bit system)

  HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

  While copy on your machine and merge. Then restart your system.

  (2) you can try an upgrade on the spot with the windows7 dvd. Where you can repair the windows all without losing what.

  Thank you. :)

• Audio recording of Windows: the audio device does not work any

  I use a mobile Intel (R) Celeron (R) M with Microsoft WindowsXP Professional version 2002.

  The audio peripheral speakers do not work all of a sudden and there is no sound out put at all.

  But if I use Logitech and Microsoft HD camera mike and hear on Skype. But the speaker and mike does not otherwise for any other application.

  When I try it says there was a problem in the installation of this equipment:

  "The Conexant High definition Smartaudio HD2 - Code 18 is not installing.

  Reinstall the drivers for this device (Code 18)

  Could someone help me in the presentation how to solve this problem and help me to get the missing audio device installed.

  Thanks and greetings

  Srinivas Thompson

  Hello

  I suggest to follow the steps mentioned below and check if the problem persists.
   
  (a) click Start and select Control Panel, click on "Classic view" in the menu on the left.
  (b) double click on the "Device Manager"
  (c) expand "Sound, video and game controllers"
  (d) in the Properties dialog box of the device, on the driver tab, click set to update driver to start the Upgrade Wizard to update the material.
  Alternatively, you can uninstall the driver and then click Scan for hardware changes to reload the drivers.
   
  Also, follow the steps from the link below and check if that helps.
  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

   
  Hope this information helps.

• Cannot start the workstation service, does not work error 1068 (Vista SP2)

  Hello
  It's about a year I can't start the workstation on my Windows Vista SP2 (HP Pavilion dv9000) service.
  It fails on: "Error 1068" "the dependency service or group could start.
  CBS.log sfc/scannow shows messages like:
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"Mrxsmb20.sys ".
  -Repair corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:24{12}]"ntkrnlpa.exe ".
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:20{10}]"Mrxsmb.sys ".
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"mrxsmb10.sys ".
  A problem with the system audit reports:
  -on scname exitcode: 1068: LanmanWorkstation
  I have spent hours of troubleshooting and suspect I would need to replace the mrxsmb files but I'm not sure.
  I lived with the problem for months, but now he keeps me to install updates of Adobe software for Photoshop that requires the workstation service is running. I can't access an another XP workstation over the network.
  FYI: my mrxsmbxxx.sys files are all 23-02-2010.
  Windows updates are up-to-date, except one, the security update Windows Vista KB981852 which never succeeded to to install on my pc.
  Your suggestions are welcome.
  Thank you for your help.
  Eric

  I finally found a solution to this problem.
  I installed http://support.microsoft.com/kb/2272153/ .
  I hope it's useful to others.
  Eric

• Streaming mp3 using the Audio tag does not work in the app, while working in the browser

  Hello

  I fight with this problem on the second day and still can not get it to work.

  I'm on Soundcloud mp3 streaming and all works in Wellington and the browser on the device, he refuses to work in the application.

  -Do you have someone at - it had the similar problem?

  -Have you had a chance to make the streaming solution work in app?

  -It could be cause by the fact that Soundcloud uses a 302 redirect to a temporary URL?

  Thanks in advance

  I think that the redirect can be a problem. It works if you choose a url that links directly to a stream for example

  http://AUDIO1.ideastream.org/wcpn64

  Have you tried? I used the audio tag to read feeds with success on OS6 and OS7. On OS6 was a problem of the CBC, but the original CBC played yet.

• It says audio service does not work - why? I never changed any settings or anything and now no sound?

  What happened all of a sudden.  I did the virus scan this am and nothing appeared.  This has never happened before, and when I tried to pull trouble - he said go into Device Manager, but there was nothing there: no device?

  Hello

  Follow these methods and check if that helps:

  Method 1:

  I suggest to start in safe mode and check if you can view the devices in Device Manager.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  You can also check your profile for corruption:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Method 3:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• I can't get the update of windows to run. I get an error message that says that the update service does not work and I have to restart my computer.

  I am running Vista on a 64-bit computer.  I don't know with certainty how current I am, because as a problem earlier, but different, brought me back to earlier restore versions.  I checked the Services and confirmed that the Windows Update service is started.  I restarted my computer and the problem persists.

  Is there a file that might have something in it that shouldn't be there or I'm probably deal with a corrupt program?

  Hello

  You can reset the Windows components and see if it works fine.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

• Receive an error message "Audio service does not ' and 'volume' in the list of notifications is grayed out

  * Original title: Audio Service does not. I have audio but no volume control in the taskbar, also "" volume"in its notification list is gray out

  Using Windows 7. My Audio service does not. I have audio but no volume control in the taskbar, also "" volume"in its notification list is grayed out.

  Hello

  1. when exactly you get the error message?

  2. do you see a red brand 'X' indicating that the audio output does not work with error message?

  Please follow the steps below and we update with the results.

  Method 1:

  a: you can try to enable the taskbar.

  b. right-click on the taskbar (the bar at the bottom of your screen), select Properties.

  c. click the Notification area.

  d. then, under system icons, select the Volume that you want to display

  Run Microsoft Fix it the following article and check.

  http://support.Microsoft.com/default.aspx/KB/945011/en-us

   

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

   

  Method 2: Ensure that the Windows audio service is running on the computer.

  a. open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right click on Windows Audio serviceand then click Properties.

  d. under the general tab, next to startup type, make sure that Automatic is selected.

  e. also make sure that the service is began to.

   

   

  Method 3:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

   

  Method 4:

  Install the latest audio drivers on the computer by visiting the sound card manufacturer's Web site and check if it works.

   

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Note: visit the manufacturer's Web site to download the latest audio drivers

  For more information, see the article:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=Tab03

  Let us know if it helps!

• HP Pavilion 15 laptop: HP Pavilion - Audio Service does not

  Hi I recently bought a new HP Pavilion 15 and the volume down icon to the right, footer has an 'x' in a red circle next to it. When I go over it, it says "audio service does not work. I currently have no sound on the laptop.

  No idea how this can be fixed please?

  Thank you

  Hi Tom,

  Try the following.

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66107.exe

  When finished, press and hold the Windows key and press R.  In the run window, type devmgmt.msc and press ENTER.

  Expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66094.exe

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let Windows load completely - it can automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click on the button set as default (it will be gray if already defined)-check if you now audio.

  If you have still no audio, hold down the Windows key and press R.  Type services.msc and press ENTER.  Search for audio Windows servive, right-click and select Properties.  If the service does not work, try to run.

  If you still receive the "Windows could not start the service windows audio on local computer» Error OX800706cc - the endpoint is double ' mistake, you're best bet is to do a Refresh as detailed on the link below.

  http://support.HP.com/us-en/document/c03538721

  Kind regards

  DP - K

• No sound (audio service does not start, error 1079)

  I have no sound on my laptop.when I have troubleshooted the program that is to show that audio service does not work when I tried to start the audio service is not starting and showing an ERROR: 1079.

  I tried several times but it's showing the same...
  is there a solution for this problem?

  Hello

  Did you change your computer?

  This error code 1079, pop when you try to start the audio service?

  Method 1:

  (a) click Start, type services.msc and press ENTER.

  (b) double-click the "Windows Audio" service

  (c) click on the tab to open a session.

  (d) click Local System account, and then click OK.

  (e) right click on the "Windows Audio" service and then click Start.

  (f) follow the same steps for the service "Windows Audio Endpoint Builder.

  (g) check if the problem persists.

  I suggest you follow the link and check.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  http://support.Microsoft.com/kb/2478117

  Method 2:

  I suggest to uninstall the sound card in Device Manager and then reinstall it.

  Follow these steps:
  1. click on start and then type devmgmt.msc in the start search box and press on enter.
  2. from the list of devices, expand sound, video and game controllers.
  3. right click on the sound card, and then click on uninstall.
  4 restart the computer.

  After restarting the computer, sound card get installed automatically. Update the drivers manually for your sound card.

  Make sure that you have installed the Windows

  Method 3:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833