No sound (audio service does not start, error 1079)

Similar Questions

• Audio service does not work, error 0 x 80004005: unspecified error

  I have problems with my laptop in regards to the audio service does not. The sound icon has an x on it and ran the SCP prompt automatically update/fix drivers without success (may have spelled promot hurt, but it was the solution to many similar forum messages). I also tried to uninstall the audio driver and put it back, however when I run the driver installation an error message appears and says that Windows Audio is not running and needs in order to perform the installation. I went to the system administrator and seen the services menu and went to windows audio properties. I tried from the program and the error message "error 0 x 80004005: unspecified error" comes up. All dependent services for the Windows Audio are running, so I came to a dead end. The only thing I can think of that would make the audio not working do not is my battery. My battery is in poor condition and needs to be replaced, so I always us the AC cord to power the computer. Depends on Windows Audio battery somehow or something of this nature? If so, is there anyway around this until I can buy a new? Thanks for your help. Clay

  You say you have Vista - therefore, you the Vista drivers, drivers for W7!

  See you soon,.

  Jerry

• The Windows Audio Service does not start

  I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)

  Hi JamesSimpson11759,

  ·         What happens when you try to start the Windows Audio Service? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  I suggest you to run the Microsoft Fixit and check if the problem still persists.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  You can also view the article mentioned for more information:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Let us know the results.

• Generator endpoint Audioe Windows does not start; Error 0 x 80070002

  I have a windows vista laptop and after an accident, my computer has no sound. There is a red x on the volume and so I googled the problem; I tried to start the Audio endpoint builder but there is an error 0 x 80070002: the system cannot find the specified file. Can some help me? I want to know how to start Audio endpoint builder. Thanks in advance

  Hi yuzhouxiaojie,

  You can refer to the post made by EverettC, March 11, 2007 22:17, to check if this helps http://social.technet.microsoft.com/forums/en-US/itprovistaapps/thread/7479eeb1-f5ee-4df2-886b-0b2d3c2cb0f7/

  FIX IT to the http://windows.microsoft.com/en-us/windows-vista/Tips-for-fixing-common-sound-problems link also automatically run diagnostics and repairs problems with sound and audio on your computer.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PRINT SPOOLER service does not START, ERROR: 1058 - Service cannot be started.

  OS = XP SP3

  Laptop = Dell D500

  As directed by Microsoft and Dell knowledge base, I deleted the printer spools and pilot; and edited my registry, remove the drivers and monitors printing.  I also followed a process dictated by the KB919750, nothing helped.

  I am unable to add printers, because of this problem.

  I keep getting the same error messages...

  "Cannot start service on Local computer print spooler.

  "ERROR 1058: cannot start Service.

  OS = XP SP3

  Laptop = Dell D500

  As directed by Microsoft and Dell knowledge base, I deleted the printer spools and pilot; and edited my registry, remove the drivers and monitors printing.  I also followed a process dictated by the KB919750, nothing helped.

  I am unable to add printers, because of this problem.

  I keep getting the same error messages...

  "Cannot start service on Local computer print spooler.

  "ERROR 1058: cannot start Service.

  PML: thank you.  Your suggestion to confirm that the device was also PERMITTED did the trick!  I can now and have ADDED a printer.  Thanks again!

• Receive an error message "Audio service does not ' and 'volume' in the list of notifications is grayed out

  * Original title: Audio Service does not. I have audio but no volume control in the taskbar, also "" volume"in its notification list is gray out

  Using Windows 7. My Audio service does not. I have audio but no volume control in the taskbar, also "" volume"in its notification list is grayed out.

  Hello

  1. when exactly you get the error message?

  2. do you see a red brand 'X' indicating that the audio output does not work with error message?

  Please follow the steps below and we update with the results.

  Method 1:

  a: you can try to enable the taskbar.

  b. right-click on the taskbar (the bar at the bottom of your screen), select Properties.

  c. click the Notification area.

  d. then, under system icons, select the Volume that you want to display

  Run Microsoft Fix it the following article and check.

  http://support.Microsoft.com/default.aspx/KB/945011/en-us

   

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

   

  Method 2: Ensure that the Windows audio service is running on the computer.

  a. open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right click on Windows Audio serviceand then click Properties.

  d. under the general tab, next to startup type, make sure that Automatic is selected.

  e. also make sure that the service is began to.

   

   

  Method 3:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

   

  Method 4:

  Install the latest audio drivers on the computer by visiting the sound card manufacturer's Web site and check if it works.

   

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Note: visit the manufacturer's Web site to download the latest audio drivers

  For more information, see the article:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=Tab03

  Let us know if it helps!

• Error: 80070426-Windows Update may not install as Cryptographic Services does not start.

  Hello!

  As you can guess Windows Update is not installed for a few months. Cryptographic services does not start . CPP is the beginning.

  Error: 80070426

  Already tried a few suggestions MSKB.

  Method 2: Set Cryptographic Services to automatic, network logon. Result: Error (unsigned) 1083
  Method 3: Rename the Catroot2 folder
  Reregister DLL files that are associated with Cryptographic Services.
  However, suite couldn ' t be installed.

  regsvr32 initpki.dll
  regsvr32 gpkcsp.dll

  regsvr32 sccbase.dll
  regsvr32 slbcsp.dll

  DCOM service - access denied when running.

  sfc/scannow couldn't fix some corrupted files.

  Computer HP laptop came with Vista pre-installed, so I do not have the repair disk.

  No doubt the system restore won't help, as I remember recently that c-Cleaner wiped the old restore points.

  NOD32 Antivirus + Spyware Doctor still running. Already run MSRT and Super Spyware, but nothing much.

  Kindly help!

  Kind regards

  Satyajit

  Diagnostic report (1.9.0011.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - GD2PK - BD3R2-44MV3
  The Windows Product Key hash: f7FPE6g/CLFmnJ4E6GbEU9Xn1sA =
  Windows product ID: 89572-OEM-7332166-00021
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6000.2.00010300.0.0.002
  ID: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D} (3)
  Admin: Yes
  TestCab: 0x0
  WGA version: registered, 1.9.9.1
  Signed by: Microsoft
  Product name: Windows Vista (TM) Home Basic
  Architecture: 0x00000000
  Build lab: 6000.vista_gdr.080917 - 1612
  TTS Error: M:20091104073513946-
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: 6.0.6002.16398

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\Slsvc.exe[6.0.6000.16509]
  [File mismatch: C:\Windows\system32\drivers\Spsys.sys[6.0.5840.16389]
  [File mismatch: C:\Windows\system32\Slcext.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\advapi32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\kernel32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rpcrt4.dll[6.0.6000.16525]
  [File mismatch: C:\Windows\system32\authz.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\msvcrt.dll[7.0.6000.16386]
  [File mismatch: C:\Windows\system32\samlib.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\ntdsapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\dnsapi.dll[6.0.6000.16615]
  [File mismatch: C:\Windows\system32\ws2_32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\nsi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\user32.dll[6.0.6000.16438]
  [File mismatch: C:\Windows\system32\gdi32.dll[6.0.6000.16766]
  [File mismatch: C:\Windows\system32\msimg32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\powrprof.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\setupapi.dll[6.0.6000.16609]
  [File mismatch: C:\Windows\system32\oleaut32.dll[6.0.6000.16609]
  [File mismatch: C:\Windows\system32\ole32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\shell32.dll[6.0.6000.16774]
  [File mismatch: C:\Windows\system32\shlwapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\version.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winmm.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\oleacc.dll[4.2.5406.0]
  [File mismatch: C:\Windows\system32\mmdevapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wtsapi32.dll[6.0.6000.16553]
  [File mismatch: C:\Windows\system32\regapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\crypt32.dll[6.0.6000.16425]
  [File mismatch: C:\Windows\system32\msasn1.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\userenv.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\secur32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\netapi32.dll[6.0.6000.16764]
  [File mismatch: C:\Windows\system32\psapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\netrap.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wldap32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winbrand.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\iphlpapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\dhcpcsvc.dll[6.0.6000.16512]
  [File mismatch: C:\Windows\system32\winnsi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\dhcpcsvc6.dll[6.0.6000.16512]
  [File mismatch: C:\Windows\system32\gpapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\slc.dll[6.0.6000.16509]
  [File mismatch: C:\Windows\system32\gpsvc.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\sysntfy.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winsta.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\nlaapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\ncrypt.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\bcrypt.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mpr.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\credui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\cryptui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wintrust.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\imagehlp.dll[6.0.6000.16470]
  [File mismatch: C:\Windows\system32\dbghelp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mssign32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\wininet.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\normaliz.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\iertutil.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\tapi32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rtutils.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rasapi32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rasman.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rasdlg.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mprapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\activeds.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\adsldpc.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\atl.dll[3.5.2284.0]
  [File mismatch: C:\Windows\system32\certcli.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winscard.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\netplwiz.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\urlmon.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\propsys.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\xmllite.dll[1.1.1002.0]
  [File mismatch: C:\Windows\system32\mlang.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\advpack.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\apphelp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\msiltcfg.dll[4.0.6000.16386]
  [File mismatch: C:\Windows\system32\shunimpl.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\devmgr.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\newdev.dll[6.0.5054.0]
  [File mismatch: C:\Windows\system32\dwmapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winspool.drv[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\cscapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\windowscodecs.dll[6.0.6000.16740]
  [File mismatch: C:\Windows\system32\ntshrui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\feclient.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\shdocvw.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\imm32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\msctf.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\duser.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16386_none_9ea0ac9ec96e7127\gdiplus.dll[5.2.6000.16386]
  [File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16550_none_56f0fd51b4f462f8\gdiplus.dll[hr = 0 x 80070002]
  [File mismatch: C:\Windows\system32\msrating.dll[7.0.6000.16386]
  [File mismatch: C:\Windows\system32\ieframe.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\msi.dll[4.0.6000.16386]
  [File mismatch: C:\Windows\system32\mshtml.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\msls31.dll[3.10.349.0]
  [File mismatch: C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_87e0cb09378714f1\comctl32.dll[5.82.6000.16386]
  [File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_40339432230aebeb\comctl32.dll[hr = 0 x 80070002]
  [File mismatch: C:\Windows\system32\comdlg32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\printui.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\cfgmgr32.dll[6.0.6000.16609]
  [File mismatch: C:\Windows\system32\puiapi.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\hlink.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\imgutil.dll[7.0.6000.16386]
  [File mismatch: C:\Windows\system32\usp10.dll[1.626.6000.16386]
  [File mismatch: C:\Windows\system32\inetcomm.dll[6.0.6000.16669]
  [File mismatch: C:\Windows\system32\msoert2.dll[6.0.6000.16480]
  [File mismatch: C:\Windows\system32\ieui.dll[7.0.6000.16809]
  [File mismatch: C:\Windows\system32\efsadu.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\mfc42u.dll[6.6.8063.0]
  [File mismatch: C:\Windows\system32\odbc32.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\oledlg.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\linkinfo.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\query.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\clbcatq.dll[2001.12.6930.16386]
  [File mismatch: C:\Windows\system32\cabinet.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\scecli.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\w32topl.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\rpchttp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\winhttp.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\fwpuclnt.dll[6.0.6000.16386]
  [File mismatch: C:\Windows\system32\ktmw32.dll[6.0.6000.16386]

  Other data-->
  Office details: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D}1.9.0011.06.0.6000.2.00010300.0.0.002x 32*-*-*-*-44MV389572-OEM-7332166-000212S-1-5-21-3747016915-1105364745-1034703816Hewlett-Packardlaptop Presario V6500 Hewlett-PackardF.2A 20080222000000.000000 + 000A4313507018400EE40090409India Standard Time(GMT+05:30)03HPQOEMSLIC-MPC10310312C0A25836FDBE5ACFmDbcrRY1pTOcrz4ZUZRHhpUuc0 = Microsoft Office Enterprise 2007 89388 726-2958074-6564314100Microsoft Office home and Student 20071219

  Spsys.log Content: U1BMRwEAAAAAAQAABAAAAC58AgAAAAAAYWECADAgAADCBCA/81zKARhDs/4hWdo7Xkl9D+HKpni6Sfv7jmoHEBVqqW/xcrQYytms9RtRtLWsIPXcLJpmwOfDvX0zCybmDilyQLttVIyTRhimAiUiBLOYhz3eEQj3sEGnmR0ReJ9KlWCJouxq6PAIwHwHVMfvNauSbFvmaTCDPKtQZQFIQcDXIAwFGl6D9S/GUDYecePFRKM/leS97bxOVVm9fICZUkfHdDNbo72qUqYYmAlRJO05+WV1r70w2O6Pl99gqTnSYR4j0FashTOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAw=

  License data-->
  The software licensing service version: 6.0.6000.16509
  Name: Windows Vista HomeBasic edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: 199086aa-6cb8-4e5b-b698-f2be56f1e8ee
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89572-00146-321-600021-02-16393-6000.0000-0492008
  Installation ID: 234075993312598255872244522405847072649516093605215141
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
  Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
  Partial product key: 44MV3
  License status: licensed

  --> HWID data
  Current Hash HWID: QAAAAAEABwABAAIAAgABAAAAAwABAAEAnJ9ERYTHdhu84yC + gASIzAaYmGC6ZEQsznDy9J4v6lrYfiqsrFZ4qg is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP NVIDIA MCP67-M
  SRAT AMD HAMMER
  HPET PTLTD HPETTBL
  START PTLTD $SBFTBL$
  MCFG MCFG PTLTD
  TCPA Phoenix x
  SSDT PTLTD POWERNOW
  SLIC SLIC-MPC HPQOEM

  Thank God!

  Finally, I worked it out myself. But it's painful to watch than virtually any other that Uday has responded to my problem. Something I've been waiting for so eagerly.

  I applied my common sense and defragmented the dirives then sfc/scannow, and it worked. Cryptographic Services said when I began to log in as network account. So my problem is solved. Now, windows update works fine.

  Interestingly, Microsoft Fix it, says it cannot start the Cryptographic Services. Are God, while the _____ you supposed to difficulty? It made Internet Explorer icon on my desktop and other places.

• Error 1079 / base OS Windows 8 / Bluetooth service does not start

  Error 1079 / base OS Windows 8 / Bluetooth service does not start - I tried service.msc-> selecting Bluetooth support Service-> properties-> log on-> This account-(Administrator) / (NT AUTHORITY\LocalService) / / but nothing works, I had searched a lot on this problem but there is no solution to the problem of basic windows 8 (built in) only for win 7 and windows server... .but not for the basic version of windows 8 that I have...

  Now when I click to start the Bluetooth support service it always says error 1079...

  Hello

  Please, try the steps here to solve this problem:

  http://www.kapilarya.com/services-failed-to-start-in-Windows-8-1

  Hotfix applies to Windows 8 too and you must only put NT AUTHORITY\LocalService on the properties of the service.

  Hope this helps, good luck :)

• HP Pavilion 15 laptop: HP Pavilion - Audio Service does not

  Hi I recently bought a new HP Pavilion 15 and the volume down icon to the right, footer has an 'x' in a red circle next to it. When I go over it, it says "audio service does not work. I currently have no sound on the laptop.

  No idea how this can be fixed please?

  Thank you

  Hi Tom,

  Try the following.

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66107.exe

  When finished, press and hold the Windows key and press R.  In the run window, type devmgmt.msc and press ENTER.

  Expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66094.exe

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let Windows load completely - it can automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click on the button set as default (it will be gray if already defined)-check if you now audio.

  If you have still no audio, hold down the Windows key and press R.  Type services.msc and press ENTER.  Search for audio Windows servive, right-click and select Properties.  If the service does not work, try to run.

  If you still receive the "Windows could not start the service windows audio on local computer» Error OX800706cc - the endpoint is double ' mistake, you're best bet is to do a Refresh as detailed on the link below.

  http://support.HP.com/us-en/document/c03538721

  Kind regards

  DP - K

• Pavilion x 2-10-n109nl: Audio services does not

  Hi all,

  at one point in time and after any particular event, my laptop (Pavilion x 2-10-n109nl with Win10x64) started does not recognize the audio device. It displays a red x is close to the 'Volume' icon in the taskbar notification as if no audio device installed and lists an "unknown device" in Device Manager. Find that this unknown device has been "Intel ESS Audio Device (WDM)" and managed to install it with Intel drivers went back to 01/12/2016, so for the moment I had all audio devices is properly set up and works, but the Red Cross disappear and if I try to start Windows troubleshooting service it says "Audio services does not. This who can I try to do to get the problem resolved?

  Thank you all,.

  F.

  Hey @Ledbetter92,.

  Driver Audio Conexant is one that is registered in your page of drivers like Audio driver for you. This part is so good.

  Thanks for being patient and following all the steps! I very much appreciate the cooperation while trying to find a solution you did great! I wanted to make sure that I told you.

  You can try to do a reset of the BIOS. To reload the factory-installed BIOS configuration settings, perform the following steps:

  1. In the BIOS Setup utility, select the tab out.

  2. Select message Load Setup Defaults.

  3. Select Save Changes and Exit (pressing F5 and the Enter key will also load default configuration).

  4. Press ESC, then press Enter to exit the installation program.

  Source: reload the default settings

  Here is the document of HP Pavilion 10 - n100 x 2 detachable PCs-No Sound from computer speakers and Audio output connector that was created for this specific problem. You'll see below I have included the context of the document and the version numbers for each driver you need. Could you please check the versions currently installed on your laptop?

  Here are the steps in the document:

  No noise is through the computer speakers and the audio output connector headphone or external speakers are connected. An exclamation point (!) appears in the device on the audio device manager. This question is exposed on Windows 10.

  To resolve this problem, follow the steps to download and install the following SoftPaqs to update BIOS and install device drivers:

  1. Download and install the BIOS update.

  2. Download and install Chipset Intel graphics, camera and Audio Driver Pack.

  3. Download and install the Driver Audio Conexant.

  Updated HP Notebook System BIOS (Intel processors)

  • File name: SP73945
  • Version: F.06
  • Review: has

  Chipset Intel Graphics, camera and Audio Driver Pack

  • File name: SP72830
  • Version: 604.10146.2652.361
  • Review: has

  Conexant Audio driver

  • File name: SP72855

  • Version: 1.58.0.50

  • Review: has

  I would like to know how it goes

• "IDT high definition Audio Codex does not start"

  Windows Error Message "IDT high definition Audio Codex does not start" then said to check the audio device, WHAT to DO?

  Hello

  1. Once you get the error message?

  2 have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Run the patch from the following link and check the status of the issue.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2:

  Uninstall, reinstall the sound card driver and check the status of the issue.

  Uninstall the driver for the sound card.

  a. Click Start.

  b. click on 'Control panel' and select 'performance and Maintenance '.

  c. click 'System' to open the' system properties '.» Click the 'Device Manager '.

  d. click on '+' alongside 'Sound, video and game controllers"to expand this entry.

  e. right click on the audio device and click on uninstall.

  Download the latest driver from the website of the manufacturer of the computer audio card, install on your computer and check the status of the issue.

• My audio service does not work - I can not use my pc on mode safe by minegold. How to return to normal

  my pc starts only in safe mode and I like the audio service is not running.

  for example, when I play something with you tube, I can see the video, but

  without sound.

  Hello

  Audio service does not work in Mode without failure.

  The services are very limited in safe mode.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• AUDIO SERVICE DOES NOT

  Audio service does not... I get a message saying... this computer cannot play audio because the Windows Audio Service is not enabled... even after that activation still does not work... its recognizingal my reading, sound and recording... says they're all works... but still no sound... got a new sound card, still nothing

  Hello

  Refer to the steps below to solve the problem.

  Step 1:

  I suggest to refer to the link below and follow the step by step guide to fix issues with the no sound in Windows Vista.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Step 2:

  You can also check out the link below which provides an automatic fixit to solve the problem and also provides manual steps.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  If the steps above do not help you can also refer to the link below and follow the suggestions given by Linda Yen in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itproperf/thread/56d0bf26-d5a7-42FD-9b95-d6ba89c53f6e

• Bluetooth support service does not start on VISTA

  When I go into the Services Panel it shows of Support Bluetooth Service is set to automatic but not started. When I try to start this service, it gives me error: 1053 indicating that the service has failed within a reasonable time. I have a MX5500 Revolution keyboard and mouse combo that works very well. But when I try to put the mini hub so he could accept the other BT devices, it hangs, freezes or crashes. I tried to uninstall and reinstall the software several times with no luck. I know that the reason that this happens, it's the BT support service does not start. Any help is appreciated.

  Hello

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
  When you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREEhttp://www.nirsoft.net/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.