With the help of old Signature with BB10 keys

Similar Questions

• With the help of old gear series noon on El Capitan

  I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.

  There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.

  Someone at - it ideas, would like to get this Panel communicating effects via MIDI.

  Thank you

  

  

  

  Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of old Windows CD to install the optional component deleted Outlook Express and I need to get it back!

  We have received a Windows XP laptop from a friend and use Outlook Express for e-mail. We had a number of other things such as pilots with the laptop but not the Windows CD.  Then we wanted to reduce the size of a jpg image and I wanted to use MS Photo Editor to do what I then read on the Microsoft site that I could get by installing from any Windows CD.  Therefore, I used an old Windows XP CD from another PC, choose to install an optional component and chose as accessories to the next screen, ensure that all other options were struck down, assuming that so they would simply not be installed.  One of them was Outlook Express and Internet Explorer.  Instead of THIS the wizard DELETED Outlook Express and Internet Explorer.  When I tried to get him back by checking these options, asked me for the 2nd day of the original installation CD - which of course, I did not!  I have managed to re - download IE8 from Microsoft Download site, but of course do that for Outlook Express - and we don't have Office on this computer: (.)  Help!  (a) is it possible to reverse this process to remove/uninstall Outlook Express? (b) we now lost all our emails? (c) I already tried to go back to a previous good configuration, but that has not worked.

  Thank you in advance for advice, answers or help.

  First, make sure that OE has actually disappeared.  Go to start | Run and paste this and see if OE starts:

  "c:\program files\Outlook Express\msimn.exe".

  Including the quotes and see if OE starts.  Very often "withdrawal" OE removes just the shortcut to it.

  If this does not work, you can try reinstalling XP SP3 (http://windows.microsoft.com/en-US/windows/help/learn-how-to-install-windows-xp-service-pack-3-sp3), but you should probably uninstall IE8 first and then reinstall it later.

  You can also go to the c:\windows\inf directory and locate the msoe5.inf file and right-click on it and choose Install and see if that fixes things.

  See if that works.

  Steve

• With the help of old VI´s in newer versions

  Hello

  I have a few old VI´s. They are written with LabView 5.0, on our system running LabView 8.6 and it is possible to open the old VI´s isn´t.

  Is there possibility to rebuild the old VI´s? And if it is possible how can I convert the old VI´s in the most recent.

  THX

  Post here. Someone will convert it for you

  [Edit: or there are discussions for the conversion of 5.0 to 8.x. Post here, so that will bring together similar requests in one place.]

• With the help of old computers

  I recently purchased 3 computers with OS 8.1 Windows and MS Office 365 to replace my computers in 2005, which took place from the XP operating system.  My old computer still works well, but they are not all the material was updated to use the Windows 8 operating system.  So I want to disconnect them from the internet and use it only for writing files and financial records.  I have the original CD until Service Pack 3 installation. So I want to re - install the operating system to get rid of old programs I need is no longer.  My question is how to do it of updates from Microsoft, I need to re - install for OS the most reliable and effective, in my opinion, there are several updates only slow down the operating system and are not necessary if the machine is not connected to the Internet?  Your contribution to this issue would be appreciated thanks.

  Installation of updates does not cause all more or less the programs to run. Only, it updates the logic that a running program would use if he had ever run.  It is never good to ignore updates, even those that you may not think are associated with online components, because the system uses still common components for video rendering, audio, PDF, print, graphic display and processing files of... this. Updates are also cumulative and build with each other. Any particular update is assuming that all previous ones have been applied. Having gaps in these can be an attack vector important feat. As much as you are using Windows XP, I recommend to get fully updated running a good antivirus that has a subscription of active update (if required for updates) and using a non administrator account for daily use. In this way any attack that never happens to compromise your profile can take administrative measures.

• With the help of my signature via a proxy server does not terminate but not from RIM

  I now use the signature Server successfully to sign sensitive data on the device

  associated with our application.

  However, when trying to sign full RIM signatures through a proxy server, and my

  Server deals in reality as well and even send emails of success, but the signing tool

  does not receive a final acknowledgement that he search and eventually times out.

  I noticed for RIM signatures that we are hitting servlets, while the default configuration value for our

  signature server is used.

  Is there something we need to do for our server works correctly when it is connected through the proxy?

  NOTE: everything works fine when the server is on the same network as the GIS tool.

  Thank you

  Mark

  It turns out that it's the server signature RIM as I expected.  It does not return the appropriate response headers.

  The server does only return HTTP/1.1 200 OKCRLF and then the payload.  We discovered

  If we put an Apache proxy before the server signature and after our proxy

  that it will accommodate the non-standard answer and mark the headers with a stored block transfer

  coding and then all is good.

  So the reason why the public signature RIM servers work through the proxy must be either because the bug

  This server is fixed or a proxy because Apache-like sitting in front of the signature server.

  I hope that this will save others some grief in the future.

  concerning

• With the help of old Windows 2000 laptop. Some of the keys by typing numbers instead of letters

  Original title: Sub-cles in Windows 2000

  I have reactivated a portable windows 2000 pro. I find that some of the keys produce a number rather than the letter, as 6 instead of o. That's if for a long time that I have used W 2000 I forgot how to reset the keyboard to letters only.

  In fact, this is not a function of Windows (2000 or another). It is a function of material of your laptop that remaps several keys to duplicate a NUMPAD on a smaller keyboard. In general, the feature is enabled or disabled with a Fn + NumLck key combination or (more rarely) a button dedicated to the NumLck .

  Not knowing the make/model of your real hardware makes it difficult to be more specific.

• Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

  Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

  Thank you!

  File-> open recent. Lists the catalogs you have opened and will allow you to choose one of the previous catalogues.

• With the help of DirectX 11 with older hardware

  Hello, I have a question about DirectX 11. I have a graphics card that is designed for DirectX 9, I was wondering if DirectX 11 will work at all with my card. From my understanding, fine, but not with the new advanced features that would have a DirectX 11 compatible card. Is this correct? Would be using DirectX 11 with a so-called "not compatible" graphics card slow down performance? Thanks for the info, XPAero

  Features of DirectX 11 works on a DirectX 11 compatible card. But you can use your DirectX 9 card anyway. DX11 is hardware compatible DX9. Although you may miss DX11 performance improvements is to wait. a downturn with the help of an old card, however, would be surprising (not to get improvements is not the same as obtaining a downturn). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• Signature of the .cod with custom key file files

  Brand new on-site development of BlackBerry (2 weeks in)-so please forgive me if this is in the wrong place.

  I am currently using the CodeSigningKey and the DatabaseFactory.encrypt for an application that I developed that will use a database.

  I'm a ControlledAccessException during an attempt of the DatabaseFactory.encrypt with the key that I provided. I think it's because I didn't sign my files with the file ___.key *.cod correctly.

  I use sqlitedemo as a guide files, and in the comments he mentioned that I need to create my own pair of public/private key using the administration of BlackBerry signing authority tool - I did. The question I have is when packing my request in the BlackBerry Java plug-in for Eclipse, sign tool is running and said that this particular key file is not saved with a server.

  I found documentation on signing here:

  http://docs.BlackBerry.com/en/developers/deliverables/1077/BlackBerry_Signing_Authority_Tool_1.0_-_p...

  And this guide mentions that I can use a tool of file signature to sign the *.cod file manually so that I don't have to worry about set up a server, as long as I know the private - key password what I do. Is it still possible to use such a tool? And if so - where could I find one for a Mac environment (I can run on Windows, if necessary (I did to generate the key file), but I prefer to keep everything on a single machine).

  If this is not the case - there - it an easy way to configure the server and a better guide illustrating how to put in place the signature tool so that the keys are registered with my server?

  Thank you very much for your help

  Hi Mark,

  Thanks for the reply!

  While it's an excellent resource it unfortunately not answered my question. Like all other documents that I linked earlier, this resource talks in Task 4, step 2 of:
  'Start the application file signatory in the administration of BlackBerry signature tool '.

  I had downloaded and installed the BlackBerry Signing Authority tool a few times (it installs really as "BlackBerry password based code signing), but never found dittos application sign. On a whim, I went into the folder, it was installed and just started running all *.exe that I could find. Finally, it is of the 'SigningAuthorityAdmin.exe' and 'SigningAuthority.exe '. The first will create the key, the second is the tool of "file signatory."

  Hope that will help everyone in the future that awaits the names is compatible...

  Edit: I have not found the Mac environment anywhere... so I assume that there is not.

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  You can just copy/paste the enchilada itself on another page, pretty easy!

  If you want to reuse more often, you can open the library or libraries CC , to store and later hanging out once again. Note: for the creation of an article in the 'old' library, you must select the element on the page and click on the new icon in the " library " window To create an element of CC libraries , you can simply drag something in and out of the window libraries CC .

• help with the help of lightroom...

  Hello

  I'm trying the demo version of LR2.3 when I use Lightroom help"in the Help menu, it goes to the line. However, I downloaded the help pdf. Is any way to get the program to use the pdf file on the hard disk instead of going to the line (or that does not change when I get the full version?

  Is there a manual printed with the full boxed version?  Or do I have to print the PDF? (I am an old man and prefer :-) printed manuals

  Thank you

  As Ian said, choose Help > Lightroom help will always lead you to a HTML file. He will take you on the web if you are online, or to a subset of web help that is installed on your drive hard when you install the application. Help us update web frequently, so it's good to come online to get the latest version. We also update the PDF file. You can click on the button download PDF anywhere on Lightroom Community Help, and he will give you the latest version of web help to keep locally. I hope this helps.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?