The backup of EPMA enabled planning

Similar Questions

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• Re-enable the backup automated in iCloud

  To save the size, I deleted a backup of my camera.  From:

  iCloud: delete a backup device iOS to iCloud

  If you delete your backup for your iOS device, iCloud will stop automatically backup of the device.

  Instead of backup of your iCloud iOS device, you can back up your device via iTunes.

  I can manually save to iCloud, but how to re-enable automatic backups to iCloud?

  You just need to go to settings > iCloud and scroll down to the backup option and make sure it is turned on. When your device is locked, attached to a power source (not a computer) and attached to Wifi, it will back up once within a period of 24 hours each time that these criteria are met.

  See you soon,.

  GB

• Impossible to reactivate the backup under Windows 7 Ultimate plan

  I have been using windows 7 Ultimate on my Toshiba laptop for about 2 years. I've implemented a backup plan to backup every 28 days.

  It has worked to safeguard the 28/08/2012. However, it will not activate a backup for 30/09/2012 what do I change to reactivate the plan again?

  When I click on 'Backup now' nothing of backup jobs does not start and I can't change my backup settings, what do I do?

  Kind regards

  Donald Edmunds (Australia)

  E-mail: * e-mail address is removed from the privacy *.

  Hello DonaldEdmunds,

  Run SFC/scannow to see if you have corrupted system files. It may take a long time to run depending on the size of your disk.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  Try the backup again and see if you can make it work.

  Then check the event viewer to see if there are errors on the backup. Check the system event log and application logs. Then copy and paste errors in your response.

  Please answer back with an update on your status.

  Thank you

  Marilyn

• How to plan the backup archivelog in EM12c for a group

  I am aware that I can schedule a backup of archivelog to a single database, but it is recommended, or indeed only just backs up multiple databases is to consolidate upward under a group and then schedule a backup for that group.

  However, I think that Oracle can be left aside the backup archivelog to a group option. All that I can find a full or incremental backup option. Anyone know if it is possible to backup archivelog planned for a group?

  In addition, on a somewhat independent question;

  If I put in place a system of backup of 1st day of the month and incr full backup for the rest of the month and I have a retention time of 14 days, food will be possible after 15 days?

  You can schedule the backup archivelog as well as the full backup, there is a checkbox to do this, if it is enough for you. If you want to schedule a backup archivelog only you have the ability to create a multitasking job, with one step for each instance: Set rman environment and launch with the controls. That's the way I do my backups one after the other. But of course it is static, you must hardcode the instances in the work. There is no option to make backups only archivelog through em12c, at least not through the GUI.

  Regarding your backup problem:

  The recovery window tells rman to consider as possible, obsolete backups after 14 days. He still however will check that they are really obsolete. Your only full backup will become obsolete until you make a new. However, the incremental backup may become obsolete and deleted. RMAN was able to retrieve the instance with the full backup and the archivelogs, so the oldest incremental backup should be obsolete.

  You can ask rman which files are obsolete and explicitly specify the recovery window:

  RMAN > window recovery obsolete report 15 days;

  Concerning

  Thomas

• The Prime Minister keeps telling me: "saving the backup to the cloud creative projects requires a directory of Creative Cloud Files. Please install the desktop application creative Cloud on your computer to enable this feature. » ??

  Why the Prime Minister keeps telling me:

  "Saving the backup to the cloud creative projects requires a directory of Creative Cloud Files. Please install the desktop application creative Cloud on your computer to enable this feature. »

  I have the app already installed on my computer, I'm pretty sure of (I am connected, and the icon is still present in the top right of my screen).

  This means can't back up in the cloud? I need to do!

  Thank you!

  Hi Dolcerocca,

  "Saving the backup to the cloud creative projects requires a directory of Creative Cloud Files. Please install the desktop application creative Cloud on your computer to enable this feature. »

  I have the app already installed on my computer, I'm pretty sure of (I am connected, and the icon is still present in the top right of my screen).

  This is a known bug that we are working at this time. Sorry! You can file your own experience here.

  This means can't back up in the cloud? I need to do!

  Thank you!

  Right. You must save a separate project once per day at a minimum, copy so that you have several backups in place. Make sure automatic backup is running.

  Thank you

  Kevin

• Loading data for planning in the Interface of EPMA

  Hi all
  I have worked in Essbase and planning Applications and have accomplished the task of loading data and the option Table Interface EPMA and planning.
  
  However I have a requirement, that is to say, I want to load planning data in the Interface Table...
  Is this possible? Everyone please help me...
  
  Thanks in advance

  If you want to fetch data from the essbase planning data and load into a table of interface?
  The table interface is essentially just a relational table, there are a number of ways to get order dataexport data, report script, cdf, essbase mdx.
  You could automate with scripts, ODI, or if you are willing to pay then stars analytical.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Photos disappeared with the backup

  Please help me! I took some pictures yesterday but I quickly ran out of space on my phone, so I have deleted many apps, so I could continue to take them. Later, when I got home, I made a backup to iCloud and then deleted all of my iPhone so I could restore it and win some space. But when I restored it the phone almost all of my pictures were gone, it doesn't show until May 18.

  I had most of the photos on my selection but I didn't download anything to her after June 16. The only really important stuff was yesterday and the day before.

  All photo recovery software are paid and very expensive, so I won't use it. I consulted the backup folder on my iPhone via my computer and changed all .jpeg files, but all the photos are mixed and I don't think that those of yesterday is there either. Strange thing is: there are photos of like three days ago and since today, BUT THE TWO DAYS THAT QUESTION AREN'T THERE.

  Please please please help me I don't know what to do. And just to let you know, if you're curious, or while the pictures were as cute selfies or an evening with friends, know that it was pictures of the arrival of the Portuguese team after Euro 2016, we won! Proud to be Portuguese, but I kind of want that my pictures back :/

  PS Sorry if you are french, but I'm #teamgrizi completely (except when he is playing against my team..)

  P.P.S. don't be not average, and if I did something wrong sorry but please help or get out.

  You have the iCloud library enabled on this device?

• Why the backup doesn´t Icloud Whatsapp appear in Icloud my player?

  I ve got an iphone 6 (IOS 8.3) and backep upward from my conversations of Whatsapp to Icloud. But it doens´t appear in my Icloud drive. He says that my drive is empty.

  Thanks for any idea!

  Backups do not go to iCloud by car. iCloud is to store documents:

  iCloud Drive FAQ

  The backups go to iCloud, but content cannot be played directly. You can check which applications are underway by going to settings > iCloud > storage > Storage manage, click on the device and the list of applications during a backup will be under the section "next backup size. If they are enabled, they are ongoing.

  See you soon,.

  GB

• What is normal for the backup of XP SP3 and the startup type of the removable storage service?

  I was getting ready to plan and attempt a clean full backup for tonight.  I have the backups created on several entities, currently backup but have a very stable system at the moment and wanted to try to make a clean backup file.  That day has finally arrived after been forced a corrupted system files hard drive failure "repair" critical and forced me to go back to SP1a (my Windows Genuine valid CD which I highly appreciate) in order to obtain any boot system, including safe mode and console mode.  Repair has presented many incompatibilities at the level of program and system, including the basic WMI and COM of the corruption system.  Three months later... it of time to update my backups and recovery procedures and hope that this does not happen!

  In preparation, I decided to refresh my memory on the use of the backup and by browsing the Help and Support Service Center files.  One of the first things I noticed was "storage removable service must be started for the backup works correctly."  Audit and inspection of my existing Services using computer (Local) management, I have observed that after a normal windows startup, the removable storage service is not started with manual startup type.  I use a USB drive connected as my backup media, and it is fully operational as a normally formatted NTFS data disk volume.  I have windows indexing disabled on this volume.  Is the type of service required removable storage of normal manual started?  The backup program will automatically start this service?  I know I've never manually started it myself and backups seem to work well.  Should we change the startup type to automatic?

  -Thanks, Jerry

  I would like to leave as a textbook.

  The Service will start (if capable) as soon as ntbackup.exe begins.

  If you want to see, with your Services window related to the function of RS place and it will not work and the manual.

  Click Start, run and enter in the box:

  Ntbackup.exe

  Click OK to start the backup and the Restore Wizard.

  Go back to your Services window and press F5 to refresh and SR Service should now work.

  When you exit the backup and the Restore Wizard, the RS Service stops (it may take a few minutes), and you may need to close the Services applet and reopen it to notice she's moved to manual and not running.

  You will see things like present to the event system log viewer:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  The removable storage service entered the running state.

  (this is when you go out the backup and the Restore Wizard and wait a few minutes... then the Service stops itself...)

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7036
  Description:
  The removable storage service entered the stopped state.

  It's like aid and assistance...  Most of the people (including the technical support engineers who are hired by Microsoft) say to set the Startup Type to automatic, but you don't have to...  Set it to manual and it will start fine when he needs start (if he can).

  There is no need for these Services (and many other Services in XP) as starting at each restart and run all day without doing anything.

  Here is a good list that will help you understand your XP Services:

  http://www.blackviper.com/2008/05/19/black-vipers-Windows-XP-x86-32-bit-Service-Pack-3-service-configurations/

• The backup computer fails with the error "access is denied. (0x80070005) »

  original title: computer backup failure

  My computer will be back up to a point, then will be an error "access is denied. (0x80070005) "at the same time, Microsoft security essentials SAIS it detects a potential threat.

  My question is this: if he stops because it detects a corrupted file?  or is there an error with a certain application that prevents a full backup?

  Hi Cyberwasp35,

  ·         Exactly how are you trying to backup?

  ·         You run the computer as an administrator?

  ·         Have you tried a backup on an external hard drive?

  Try the following steps.

  Step 1

  Perform an online scan to remove the threat detected by the basics of Microsoft security during the backup process

  To make online scan click on the link below:

   

  Online analysis of Microsoft security essentials

  http://OneCare.live.com/site/en-us/default.htm

  Try to disable antivirus software and check if the backup is successful.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2

  This error can also occur because the recovery partition is enabled for the file backup or restore of the system and is almost full. To work around this problem, do not select D:\ as a backup source. In addition, go to the System Protection in Control Panel and make sure that D:\ is not activated for restore points.

  (1) open the backup and restore by clicking on the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking the backup and restore.

  2) click change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (3) clear the partition D drive if it is selected, and then try to backup again

  Check if the service is stopped or started. Change it to start if it is stopped. The service name is windows backup.

  http://Windows.Microsoft.com/en-us/Windows-Vista/manage-services-in-Windows-Vista-from-Windows-Vista-inside-out

  Reply back with the results

• HP recovery D needsrepairs says not enough memory for the backup

  need to know which files can be deleted or how re-branded more memory for this partition without damaging it.

  Sunday, September 30, 2012, 23:53:14 + 0000, RCPatt wrote:

  need to know which files can be deleted or how re-branded more memory for this partition without damaging it.

  Do not delete anything and do not write something here! And do
  do not try to assign any disk space more (it is not called 'memory' on a
  hard drive) to it.

  It is a recovery partition; its purpose is to provide what you need
  to reinstall Windows if it should be necessary. Anything for her and
  you will lose this ability.

  Your computer comes with instructions on how to write its contents
  on a DVD so that you would be able to reinstall Windows if your drive is dead.
  Which should have been the first thing you did when you got the
  computer, then do so immediately as soon as possible.

  And another point: backup to a second partition is by far the
  form of backup is the lowest. It's better than no backup at all,
  but barely. I do not recommend backup a second not removable
  hard drive (or worse, a second partition on your hard drive only)
  because it leaves you likely to be simultaneously the original losses
  and backup for many of the most common hazards: severe defects of power,.
  nearby lightning, virus, attacks even the theft of the laptop.

  In my view, secure backup must be on a unguarded and removable media
  in the computer. For backup really secure (required, for example, if the)
  the life of your company depends on your data), you should have several
  generations of backup and at least one of these generations must be
  stored off-site.

  My computer is not used for business, but my personal backup plan
  use two identical removable hard disks, I alternate between the two,
  and use Acronis True Image to create a complete copy of the primary
  drive.

  I also use a 1 GB USB key pair to make more frequent backups
  my most sensitive data (for example, financial information). For this, I just
  Drag and drop.

  You can read this article on the backup that I wrote: 'save '.
  "Your computer regularly and reliably" to
  http://www.computorcompanion.com/LPMArticle.asp?ID=314

  Ken Blake, Microsoft MVP

• "The backup did not complete successfully. Access is denied. (0x80070005)

  IV got a new pc a few months ago, im (del vostro 220) by getting only round to back up all my stuff now. I've run the wizard, insert a dvdr and follow the instructions. A few minutes later, I get the message...

  "The backup did not complete successfully. Access is denied. (0x80070005)

  You can also view this page.
  Quote:
  "This error occurs because the recovery partition is enabled for the file backup or restore of the system and is almost full. To work around this problem, do not select D:\ as a backup source. Also, go to the System Protection in Control Panel and make sure that D:\ is not activated for restore points. »

• Getting the 80070005 error during the backup with windows vista home premium then closes backup

  When I use backup in windows I get errors then backup closes. the errors were 0x800700AA and now 0x80070005. I'm not familiar with what they mean but have tried Fixit without success.

  Hi Brian,.

  This error code means that the file or folder you want to backup does not have the necessary permissions.

  Method 1:

  If you need to make a backup of any file or folder, please ensure that give you all the permissions for that particular file or folder.

  To set the permissions of files, see the procedure below:

  a. right click on the file or folder and then click Properties.

  b. click the Security tab.

  c. under group or user names, click your name to see the permissions you have.

  d. If they don't get permission, click on change and give the full control.

  e. then check if you are able to backup.

  What are the permissions?

  Method 2: Check if you are able to backup by following these steps:

  Try to temporarily disable your anti-virus and malware during execution of the backup. If the backup works fine, then you have to search for updates and firewall settings in the security software.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Method 3:

  Disable UAC during backup control.

  Enable or disable the User Account Control

  Note: Make sure that you enable user account control and the back of the antivirus on the computer after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

• Windows backup error: backup skipped E:\_Genie Timeline\0\C of backup as it is on the backup target

  I searched on the questions in the forum about the mistake of backup, but my mistake is a little different than most of the ones I've seen. I just bought a new Lacie Rugged Thunderbolt 3.0 USB 1 TB and formatted like the instructions say, with 100% NTFS. I got a message that he was ready to use. I tried to run a backup with the backup program I have on my laptop: Genie Timeline Pro 2012. I received a warning not configured "backup. Genie Timeline is unable to access the backup settings. "You must configure a new backup or that your data will be protected." I searched the help forums and one of the suggestions was so complicated, I sent them a support ticket. I got the answer that I was using an old and outdated version that was not supported and that I had to update to version 2015 and if I continued to have the problem, contact them again. I didn't update because it is an old laptop that I want to give, and I don't want to go to the expense. I have a laptop more recent that I have to get a 3rd party backup for. S-o-o I tried to use the Windows backup utility and enabled him to make the decisions about what to backup. It includes the image of the system and the drive E:\. Six hours later, I received the error "error in backup files 2015-04-20 164035." "Skipped backup E:\_Genie Timeline\0\C backup as it is on the backup target" is because engineering Timeline had tried to back up my files and some of them are already on the HARD drive? Should I just try to reformat the new HARD drive and try again Windows backup? I am very computer illiterate, so you can give me any help is greatly appreciated!

  An 'image' is a snapshot of your hard drive. Contains: System files, documents, pictures, music, programs. That's why it takes so long to run. Since you give the old machine now, it is totally unnecessary for you. In your case, I would use this simple solution:

  1. Connect external storage to your old PC. A 500 GB 2.5 "drive in a USB enclosure would be an excellent choice. They cost less than $60.00.
  2. Use the right mouse button to drag "My Documents", "My pictures" etc the old laptop to the external drive. Select "copy", not "move" when prompted.
  3. Connect the external drive on your new computer, and then perform some checks to make sure that you can read the files.
  4. Spend a moment thinking about your message and your browser Favorites (favorite =) files. Do you need to move them to the new machines?
  5. Use the new machine for a week or two before I give the old machine.