Windows backup error: backup skipped E:\_Genie Timeline\0\C of backup as it is on the backup target

Similar Questions

• Windows ME error after installing an Ethernet network card: "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE ".

  I installed 32-bit network card Ethernet 10/100mbps in a tower of E which has Windows Millennium Edition.  When I tried to run the C/D that came with it I got the message, "DEVCON. EXE FILE IS LINKED TO THE LACK OF EXPORT SETUPAPI. DLL:CM_FREE_LOG_CONF_HANDLE' in the network configuration panel it lists the network adapter as a TCP/IP Protocol, but could not get on the internet. In the past, the only way this computer connected to the internet was through a dial-up access. Any help would be greatly appreciated.

  original title: problem of setting up a network of maps by ME

  Hello

  Windows ME (Windows Millennium Edition) is a Microsoft product.

  There is more support available for Windows Millennium Edition.

  
  Reference: end of support for Windows 98, Windows Me, and Windows XP Service Pack 1

• Connection Manager HP stopped responding + Windows Installer Error 1719

  I am running Windows 7 (SP1) 64-bit operating systems.
  
  Started getting an error message of connection manager HP "HP Connection Manager Service has stopped responding.  Error code 8008005.
  
  HP Connection Manager v4.1.23.1 running.
  When I try to install a new version of v4.4.10.1 (SP58930) HP connection manager, I get an error of Windows Installer 1719.  Tried different solutions recommended for this, but nothing has worked.
  
  I see in the forum after this uninstall of the current version and then install the new version of the HP connection manager can solve my original problem.
  
  Before uninstalling the currenet HP Connection Manager version, I wanted to be sure that I will be able to install the new version without encountering Error 1719.  I don't want to be in an even worse situation of not being able to the HP Connection Manager after you uninstall it.
  
  Can I get confirmation from HP that I will be able to successfully install a new version after uninstalling the current version?

  ParryJM wrote:
  

  A ran the Microsoft Fixit then tried to install it and got the Windows Installer Error 1719.

  Then uninstalled HP connection Manager.

  Tried to install the HP (SP58930) connection manager and still have the error Windows Installer 1719.

  What do you suggest I try next?

  The fact that HP Connection Manager is no longer installed, how this will affect my computer?

  The fact that it is no longer installed will have no effect on the functioning of your laptop and none on the operating system.

  HP connection manager is simply a utility assistance for people who are making it difficult for the network through conections wifi and bluetooth connections.

  If you are not in this group it is really useless.

  From your description, it seems that if you can't follow instructions in the Microsoft fixit to the letter. By using the fixit is the easiest way to remove the registry entries and make changes to the registry that will allow installing and uninstalling software.  I can't recommend the methods that I use personally when I run on these issues because they involve access to the registry via regedit. The word people have never even heard of Regedit. Using Regedit can be a very bad thing for someone not experienced in the use of the registry editor.  All ch = angels did take place immediately and which included all the mistakes made during the access to the registry. Ongoing work on an operating system can fairly easily through the registry editor. Try the Microsoft fixit. It is a safe utility. Use it after an attempt to install and leave the window open until after error that does compete with the installation of the software.

• Windows Update, error 64 c and error 80070673

  Windows Update, error 64 c and 80070673?

  How to fix this error?

  Hello

  I suggest to follow the steps in the link below and check if it helps you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Windows-Update-error-80070673-64c-wont-install/7dedd4f0-1da7-4016-B0C0-1c1454df4e89

  Let us know the status of the issue.

• I get the Windows Update error 80070005 error message when you try to update my Windows 7 to Windows 10.

  I recently tried updates of Windows 7 10 and received the above error.  Did a google search and came up with the joint - CMD file which I've run in administrator mode.  It seems did not make my system better.  Any suggestions?

  And the CMD file resets all security settings to what they should be?

  Thank you in advance.

  = Run Reset.cmd block

  off @echo

  setlocal

  echo.
  Determine the echo that we are on a 32-bit or 64-bit machine
  echo.

  If "PROCESSOR_ARCHITECTURE %" == "x 86" if "% PROCESSOR_ARCHITEW6432%"is"" goto x 86 ".

  set ProgramFilesPath = % ProgramFiles (x 86) %

  GoTo startResetting

  : x 86

  Set ProgramFilesPath = %ProgramFiles%

  : startResetting

  echo.

  If there is "%ProgramFilesPath%\Windows Resource Kits\Tools\subinacl.exe" goto filesExist

  echo * ERROR *-could not find file %ProgramFilesPath%\Windows Resource Kits\Tools\subinacl.exe. Make sure SubInAcl is properly installed and re - run this script.
  GOTO END

  : filesExist

  pushd "%ProgramFilesPath%\Windows Resource Kits\Tools"

  Subinacl.exe /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f/Grant = system = f > List1.ini
  Subinacl.exe /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f/Grant = system = f > List2.ini
  Subinacl.exe /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f/Grant = system = f > List3.ini
  Subinacl.exe /subdirectories % windir % / Grant = administrators = f/Grant = system = f > List4.ini
  Subinacl.exe/subkeyreg/Grant "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component based Servicing" = 'nt service TrustedInstaller' = f > List5.ini

  echo of FINISHING.
  echo.
  echo press any key to exit...
  pause

  popd

  : END

  ENDLOCAL

  = End of block Reset.cmd

  Hi Charles,

  Thanks for posting in the Microsoft Community.

  Please follow the response by AbleRR dated May 17, 2012 date and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/all/Windows-7-Windows-Update-error-code-80070005/0e113061-e876-4451-a4e9-0191e69abd66

  Please let us know if the problem is resolved or you need additional assistance.

• Windows Update, error 0 x 80070057 (2015-11-11-T-08_10_22P)

  I have about 2 GB of updates of windows that will not download. If I choose 1 or all updates, the status bar just stay at 0% downloaded. I used the wizard of Windows Update diagnostic thing and the results were:

  Windows Update, error 0 x 80070057 (2015-11-11-T-08_10_22P) - not fixed

  Registration for the service is missing or corrupt - fixed

  Recent updates installation problems - fixed

  Recent updates installation problems - fixed

  Recent updates installation problems - fixed

  After restarting windows updates always do not download.

  I'm running Windows 7 64 service pack 1.

  concerning

  Hi Nico,

  Thank you for viewing in Microsoft Community, we appreciate your interest for Windows 10.

  As you can not upgrade to Windows 10 through the update, this issue could if explained by antivirus or corrupted software update Windows components.

  I suggest that you follow the troubleshooting steps that are being provided by Andre Da Costa in the link below and check out them.

  Reference: How-to: Troubleshoot Setup and stop common mistakes during the Installation of Windows 10

  Section: 0 x 80070057

  It will be useful. Reply to the post with a State updated with this issue, we will be happy to help you further.

• Error - skipped backup E:\filename backup as it is on the backup target, under Windows 7.

  Original title: not to come back! Backingup ignored!

  I am trying to create a back up. I get an error message saying that the "Backup jumped backup E:\filename as it is on the backup target. I have unintalled the program with the name of the file in question and removed all the remaining files. Am I missing something?

  It seems that the Windows Image backup worked, but not the personal files. Any help would be appreciated.

  I know this is a late response to this topic. I had the same problem and he said the following
  > Backup jumped backup D:\Users\Joshua\Documents as it is on the backup target.
  Jumped backup D:\Users\Joshua\Music backup as it is on the backup target.
  Jumped backup D:\Users\Joshua\Pictures backup as it is on the backup target.
  Jumped backup D:\Users\Joshua\Videos backup as it is on the backup target.
  Jumped backup D:\Users\Joseph\Music backup as it is on the backup target.
  Jumped backup D:\Users\Joseph\Pictures backup as it is on the backup target.
  Jumped backup D:\Users\Jodi\Pictures backup as it is on the backup target.
  I used to have a 40 GB hard drive on this computer and ran out of space very fast so I changed the storage location of C:\Users\------... to D:\Users\\etc...
  The D drive is now my position that I'm saving windows 7 backups and since I backed my users documents in the C: drive when I had a bigger hard drive. something in the registry or a file still has inscriptions referring to the D:\Users\etc... Directory. anyway. just thought I would add to the confusion :).
  Nice day.

  I just fixed it.
  I returned and restored the storage locations by default on all files (i.e. photos, Documents, downloads, Favorites, search, etc...) then renamed the folder in Explorer to match the default folder. For example, after restoring the file storage location my pictures on the name of pictures by default, he was still named my images inside windows Explorer. I right click and it renamed my images in images and press ENTER. Finally after that I deleted all my libraries and restored the default libraries and now everything works well in the windows backup utility.

• Satellite L500 - error in Windows backup

  Having a Satellite L500 Windows 7 32 bit. Windows backup on the external drive is not (LONGER) work. Message: Last backup failed. Error message 0 x 8007002.

  Can set the restore/recovery point and can back up restore/recovery points, but cannot save actively / data backup on the external units with Windows tools. Council of Toshiba to 'secure your laptop' does not work as well. If possible, do not restore the entire operating system.

  Thanks for your help.

  Hey,.

  To be honest, I doubt that this question has something to do with Toshiba

  Did you already check Google for links?
  http://igtfy.com/?q=Windows+backup+error+0x8007002

  I found an answer that cleaning the registry with CCleaner (or another program) worked him would be worth to try ;)

• Error when you try to run Windows backup under Vista

  I keep getting error messages when I try to run the Windows backup to an external drive. Aired these backups every month for a while with no problems, but now he keeps by default. An old laptop, so I am running vista.

  First of all, I got this message "error 0x8007045D: the request could not be performed because of an i/o device error." After looking on the suggestion of a forum has been a problem with the external hard drive, so I ran check disk but who gave the fire. At the same time, I tried to open a file on a separate external drive to get a similar error message - seems a little by chance...

  Because the disk check gave the fire I tried to climb back again, to get the message ' the shadow copy creation timed out. " Repeat (0 x 81000101).

  Hoping that someone would have an idea of how to fix this?

  Thank you!

  Try this link suggestions

• Cannot run the Windows backup utility, error: "a file already exists (0X800700B7)."

  I have a Lenovo Think Pad with Windows Vista.  When I try to back up the computer, I choose backup and the location of tools accessory system configuration.  Then I run a backup to start and identify a DVD RW as the location of the backup files.  I click to start and a screen pops up saying

  A file exists already (0X800700B7), and at this time it cannot be saved.

  OX800700B7 is not a file name. It is an error code.

  What follows is a response to the same problem. The person who had the problem was using 64-bit. But that makes no difference in this case. Follow th step by step posted by ABC_george and see if that fixes the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-backup-cannot-create-a-file-when-that-file/d91d7785-9a00-4b26-9ae3-ae35b0d9317b

• Windows backup error; A snapshot could not be created.

  Original title: Windows 7 - windows backup - snapshot could not be created

  When you use the Windows backup I get an error indicating that the snapshot could not be created unless I'm trying to backup to DVD or a USB hard drive.

  I use:

  Windows 7 Home Premium SP1

  processor Intel I5 2310

  8 GB RAM

  1.5 TB of hard drive

  The full message is:

  "A snapshot could not be created.  Check the event logs "VSS" and "SPP" application for more information.

  Details: Writer experienced a transient error. I have the backup process is restarted, the error does not recur. »

  Where newspapers there is an event id 8229 - I went to the event log online help and tried all of the listed suggestions, including shutting down my computer and then restarting him and still get the same error.  I tried to disable the antivirus software and do the back up but still get the same error.

  I have spent at the command prompt and typed "vssadmin list writers" to see if all the writers are stable and the following are not listed as stable:

  System Writer - State [5] waiting for completion

  MSSearch writer - State [5] waiting for completion

  WMI Writer - State [9] failed

  What can I do to get the backup to work?

  Hi Tom,

  I wish to inform you that this error may occur if the Volume Shadow Copy Service of Notification of SPP has not started and is not set to automatic. Please refer to these steps to learn how to start their:

  a. on the desktop, press Windows key + R to open the Run dialog box.

  b. type services.msc in the Run dialog boxand press Enter to open Services.

  c. right-click on the shadow copy volume and the SPP Service of Notification services, and then click Properties.

  d. if the box Startup type is set to Disabled, change it to Automatic.

  e. click OK to close the Properties window.

  f. right click on the Volume Shadow Copy and SPP Service of Notification servicesand then click Start. The service should start without errors.

  If you receive any errors, please let us know.

  See the Event Viewer for the exact error message or code, and the cause of the problem. Please let us know the same thing.

  a. click on the Start button.

  b. Type in the Event Viewer, in the search field.

  c. this will bring up the box of Event Viewer . Click to open the Event Viewer.

  d. in the left pane, expand Windowslogs.

  e. click the application log and syslog, one after the other. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be in training. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

   

  Please get back to us with the results.

• Window backup error 0 x 80070057

  Recently, I get the following error message when you try to access or backup using Windows backup.

  "The backup application could not start due to an internal error:

  The parameter is incorrect. (0 x 80070057). »

  I tried the 2 solutions I found on Microsoft support:

  1. check the decimal symbol setting, it was fixed ".»

  2. Add a registry key value.

  None of these fixed the issue.

  I tried to restore my system to a previous point when when my backups worked, but that has not solved the problem either.

  Y at - it a solution or a fix to this problem?

  In nine days, two different alleged "experts" who work for Microsoft have been unable to solve your problem.

  I do not work for Microsoft and suggest ditching the backup/restore of Microsoft in favor of a popular third-party program designed and written by a society that allows their business to backup/restore Windows:

  If you want a truly refreshing experience of backup image at least consider the free version of Macrium Reflect:

  http://www.Macrium.com/reflectfree.aspx

  Think about what you do one day if you need to use your system image to retrieve, then compare what Microsoft has to offer with Macrium has to offer.

  Imagine the process using the tools from Microsoft or a company that specializes in backup/restore software.

  Imagine the support you would get from a company that specializes in the backup/restore software.

  Of course, you get more features in the paid version, but even the free version is superior to everything that Microsoft has to offer (backup/restore is not their business).

  Install and test the free version.  If you don't like it, uninstall it.

  Vroom!

• Backup of Windows 7 - error 0 x 80080005

  I am running Windows 7 and trying to back up my system.  Whenever I go to control panel > system and Securiy > Backup and Restore > backup configuration, I get the message:
  «The backup application could not start due to an internal error: the execution of the (0 x 80080005) server failed.»

  I have administrative rights on the machine.  I did a search online and tried a few things, but nothing has worked.  Any ideas?

  Either incidentally, all notes on this in Windows that I could find are Windows Vista and dated 2009.  Very confusing...  Something concrete for Windows 7?

  honestly for this question, I would ask this question in the technet forums only because I see more reported stuff out there.  I've included a few other links on this topic.  I hope this helps, but honestly the windows backup utility is not the greatest.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/0f8bb75c-f5a6-4A3B-b2a7-cf20c4986244

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/f6c42c2f-b04a-4f43-a4da-fbc5d20226a8

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/6bf794ff-6260-41de-938B-760fbefeb4c4

• Backup of Windows 7 - error code 0 x 81000031

  Failure of Windows backup and get follow message:

  Windows backup does not have everything in determining the location of the libraries of one of the users included in the backup. Details: An element of Volume Shadow Copy Service has encountered an unexpected error. Check the log of events applications for more information. Error code is 0 x 81000031.

  What should do?

  Long Hello,

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Error code 0 x 81000031 occurs when you try to back up files by using the backup and restore on a Windows 7 computer Assistant
  http://support.Microsoft.com/kb/975692

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Backup Windows 7 error code 0 x 81000037 ' snapshots of files cannot be read. "

  Hello world
  Today, I tried to make my first backup of the computer.
  I tried 4 times now, but still got the same error, something about shots of files that cannot be read.
  Error code = 0 x 81000037
  I really tried many things to solve this problem, because I do not know how to start.
  Any help from someone who knows what to do is certenly welcome.

  Thank you in advance, Michael

  original title: backup Windows 7 error code 0 x 81000037

  Hello

  I have the same problem two days ago. However, I had installed Microsoft Security Essentials (MSE) at the beginning when I bought my computer Dell (dec 2010) (I have not used McAfee). Two days ago, I ran backup on my disk network as usual and got the error message, but I noticed that the MSE has detected a threat to java. I decided to uninstall all downloads in two days ago, and the most important was to run a COMPLETE SCAN of MSE. He caught 3 java threats and withdrawn. After that, I ran backup again and it worked perfectly. I hope that this experience will help someone when I post my response.

  My computer is a desktop i-5, Dell, Windows 7 Ultimate, my network drive is connected to Linksys E3000 of Seagate.

  Note 1: I regularly MSE update later.

  Note 2: I went through the so-called "reparse points" and without success.

  Note 3: Download those that I uninstalled everything came from Apple (please don't hurt me I don't like Apple.) I just wanted to test in all circumstances.)

  Exactly the same problem and same solution: run Full scan in MSE (which found a few 'malware' which is associated javea), then uninstall java worked well!