The Bank's Web site trying to connect but nothing. Works on Chrome & IE.

Similar Questions

• color canon lbp 2410 printer will not install in 64 bit win7. I tried everything suggested, but nothing works. It will install in 32-bit win7?

  color canon lbp 2410 printer will not install in 64 bit win7. I tried everything suggested, but nothing works. It will install in 32-bit win7?

  It's an old printer and there was only the 32-bit drivers for Windows 98 to Vista. Canon are unlikely to write 64-bit drivers now.

• The format for a specific Web site is displayed wrong, but it works fine in other browsers and Firefox's private browsing mode. What gives?

  Instead of having the sidebar on the left, I have the sidebar on the right and a big empty space where the text should be. The text is moved to the bottom of the empty space for me. I tried the cookies/cache forces the reload and total emptying, and I am sure that no change of format for manual Web site have been brought. I can see the site very well in other browsers and even in private browsing mode, so I have no idea why it is like that for me. Any help?

  Could you have zoomed in/out on this page? Go view-> Zoom-> Reset (or press Ctrl + 0 [zero])

  That solve it?

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• Hi guys, I learn about the creation of Web sites and using Dreamweaver, but what I want to know is. When I record on the creative cloud Adobe should I pay extra to use Dreamweaver, photoshop, lightroom, and Illustrator?

  It says that I have access to all of the CC apps installed on my computer, but as I start only to learn these apps I don't have Dreamweaver and Photoshop installed on my computer right now, so I should get installed on my computer, when you remove my subscription CC or I can install them as I need?

  If you start your trial period, your 30-day countdown begins immediately even if you never use the test program.

  Here are the plans and costs, pricing and membership creative cloud plans | Adobe Creative Cloud

• The settings appear correct, plug-ins appear updated, but nothing works and it takes minutes to move from one site to another.

  Pop - ups disabled but I am getting, but not much. Ad Blocker apparently activated, but no advertising are blocked on the pages of the site. Passage to my Yahoo mail takes an infinite number of times, and work within the enamel is also. I had similar problems in Google Chrome (which has features I prefer - maybe just because I'm used to) so I thought I'd see if I could avoid in Firefox, but it seems that I only have another set of problems - no real crashing, as Chrome, but a LOT of very long crash.

  Hello

  Please see this.

• is it possible that I can connect on 1 Web site under multiple connections determine?

  I need to be able to be connected on 1 Web site under multiple connections for my work. I am currently using an older version of internet explore is no longer be supported and none of the more recent browsers allow me to do. Is there a way I can configure firefox to support this?

  I tried to download this but is not available for version 26.0. Is it possible to restore my firefox or just wait until they update it?

  You have 2 versions behind now - Firefox 28.0 is the latest version, with Firefox 29,0 due to be released in 6 days.

  https://wiki.Mozilla.org/RapidRelease/calendar

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Error when trying to access the microsoft update web site

  I am using windows XP Pro. SP3 32-bit (build 2600.xpsp_sp3_gdr.100216 - 1514)

  I have IE v8.0.6001.18702

  When I access the microsoft update web site, I get a message saying that I need to update windows update and I want that allows. No matter what I said or after 30 seconds have elapsed if I do nohting I get the message:

  • The instruction at "0 x 08100068" referenced memoery to '0 x 08100068', the memoery could not be "written".

  The address is different from one attempt to another, but both are still the same as eachother.

  When I close this tab IE grave message box down and I get the message 'recovered tab' normal.

  Can I search / install updates using vbscript widely available, or automatic update installation of windows. The problem only occurs when you try to access the web site itself.

  I tried to download and install the latest windows update manually, but this does not solve the problem.

  I am unaware of the date of the last update because I'm unable to access the update log.

  I use a current version of McAfee Anti-virus.

  I think my windows is a clean install, but I didn't do it, so I can't be 100% certain.

  Jacob

  I uninstalled ie8 and found ie7 under him.

  I am able to access the site WindowsUpdate using ie7.

  Jacob

• Why after connect to my router it take 1-2 minutes to load the router's Web site? No software and the hardware has changed.

  Why after connect to my router it take 1-2 minutes to load the router's Web site? No software and the hardware has changed.

  Hello

  I suggest you check out the link to Linksys support:

  http://homesupport.Cisco.com/en-us/support

• How to connect the URL of Web site companies existing on the new site I've built?

  How to connect the URL of Web site companies existing on the new site I've built?

  Hello

  If you want to use the current domain with your new business catalyst site, please follow this link

  User manual

  Let me know if you have any question.

• I can install a shortcut to a Web site on my desktop, but when I try to call, it says path or the file is not found

  I tried to install a shortcut to a Web site on my desktop, but when I try to use it, the popup says "application not found". How to solve this?

  Have you already installed and unisntalled another browser?
  When you install another browser and choose the default installation option, the program asserts itself as the default program.

  In Internet Explorer, check the menu Tools > Internet Options on the tab programs that the default web browser is set to Internet Explorer.

  Go to control panel > programs > default programs and select "associate a file type or Protocol with a program. Scroll to the file under 'Name'.url extension and make sure that the default current is "Internet browser". Otherwise use the ' Change program... "button. »

• Cannot synchronize windows security 8 for the family with Web site

  I already have a security account for the family windows on pc windows 7 of my son.  We just got him a windows Tablet 8 for school and I want to add this device to his account with the same settings.  I went through the installation on windows 8 (creation of a local child account for him, which allows security for the family for the account).  When I hit the button to manage the settings on the family safety website, it tells me that the service is not available.  My Internet as fine (since I'm on this site), so I doubt that it is a temporary problem.  On the family safety website, it shows its Windows 7 PC, but not the tablet of windows 8.  Someone has ideas of how do I synchronize the security settings for the windows family 8 with the site?

  Hi Mike,.

  Do you get the error message when you press the button "manage settings on the family safety Web site?

  You can check the status of the safety of the family here: https://status.live.com/detail/fss

  It is possible that your Microsoft Account needs a form of additional verification.

  Follow these steps:

  1 1 glisser slide from the right side of the screen, then select settings

  2. Select change PC settings.

  3. Select accounts

  4. Select your account

  Now, you can see some indications that your account or the machine needs additional checks. If you could click on the link and follow the instructions provided, this might solve your problem.

  Once you are done, follow these steps:

  1. go in other accounts (under accounts where you were previously).

  2. Select the account you want to have a child, and then click change

  3. change the account to a child account, then select OK.

  To ensure that you are connected to the parental control service, follow these steps:

  1. press on the button of the window on your keyboard

  2. tap parental controls and select parental control

  3. press on the large enough to Manage settings on the Family Safety website button.

  4. you should see a list of people who can manage these settings online.

  Let us know the result. If you have any other questions, we will be happy to help you.

• Problem with pdf for the opening of the health gov Web site.

  Problem with pdf for the opening of the health gov Web site. I use my ipad in Safari and have installed the application to adobreader. Healthcare gov support only suggested to disable the pop-up blocker. I did, and I couldn't always open the file. No problem on a desktop computer regardless of the browser.

  In my view, they spend on their web server to a document ECM server authentication. Someone else has the problem?

  I tried the Penguin, Chrome and Atomic browsers on the ipad and the same issue.

  Thank you!

  Keren

  Okay, actually, I think that there is a problem with the type of form. It is a form of a special kind (called a form XFA or Designer, for what it's worth), which can be opened with Adobe Reader and only on Mac or Windows. There is no iPad software that can read these.

• The small icons to the left of Web site names (for example the white boy 'f' in a blue box for Facebook) on my list of bookmarks disappeared for that I now only have the names themselves, making it more difficult to navigate.

  Normally, when I click on the bookmarks at the top of my screen, the list of Web sites that appears contains a small icon to the left of each bookmark. Now I get only a list. No icons. What happened to the little flag four colors for Hotmail, the 'f' in a blue box for facebook and all the rest? It is now much more difficult to navigate.

  https://support.Mozilla.org/en-us/questions/910682

  Thank you