the best location for cache performance LR

Similar Questions

• The best location for vcenter VM and placeholder data warehouses

  Hello

  I have an SRM installation with 2 sites.  The sites are separated by metro trunk of layer 2 ethernet between the sites.

  Site has

  1 EqualLogic PS6100

  2 ESX servers configured as cluster

  There is a single data store volume over the San with all virtual machines in this cluster

  There is one instance of vCenter to this place located in the same data as the other virtual machines store

  There are also a few other volumes on the SAN used for the RDM disks in virtual machines

  I also created a small volume of 1 GB as a VMFS data store and have it mapped in SRM to use as a placeholder for a data store

  What are your thoughts on that?  Is this the best way?  I could use the local storage on the ESX servers?  Main VM can be used for fictional settings or my data store?

  SRM is installed on the same VM as vCenter

  MRS. uses SQL Express on the local vCenter VM

  vCenter also uses SQL Express

  Site B

  1 EqualLogic PS4100

  1 ESX Server, so no clustering

  There is a single data store volume over the San with all virtual machines running on ESX Server

  According to the requirements of the SRM, there is a separate instance of vCenter operating as a virtual machine, and it is not in bound mode.  Should it be? / Should it be?

  The number of volumes on the SAN and their goals is the same Site A, the only difference is the size of the volume is smaller because less machines virtual running on this site.

  Replication has been implemented and verified the bi-directional working.

  We use replication on Bay

  OK, here's the problem... When I do a recovery expected, the process stops all the virtual machines on this site that includes the server vCenter/SRM.  I guess that to happen because it's on the same database as my other virtual machines?

  If I run the recovery in emergency mode, vCenter is then moved to the other site and power.  Because the sites are layer 2 and on the same vlan, MRS. watch sites are connected by 2 instances SRM can meet eventhough they are now running on the same site.  This does not seem right to me.

  Can someone suggest a better configuration?

  Thank you

  Brian

  Hello

  There is one instance of vCenter to this place located in the same data as the other virtual machines store

  What are your thoughts on that?  Is this the best way?

  In addition to vCenter VMS residing on the store of data replicated, it's OK.

  I could use the local storage on the ESX servers?

  I think that you can, but it is not recommended, because it creates dependency on the availability of the single ESX host.

  Main VM can be used for fictional settings or my data store?

  I would not recommend this. This will create a mess on the data store. Continue to 1 GB placeholder data store you created and do not replicate.

  MRS. uses SQL Express on the local vCenter VM

  vCenter also uses SQL Express

  Consider that SQL express is adapted to the environment of very small size (don't remember the numbers now). Make sure that you do not exceed the limits.

  1 ESX Server, so no clustering

  There is a single data store volume over the San with all virtual machines running on ESX Server

  This host has sufficient capacity to run all the virtual machines together (Site A and Site B)?

  I recommend having two hosts for prallele and accelerate the recovery process (multiple virtual machines can be powered on simultaneously).

  According to the requirements of the SRM, there is a separate instance of vCenter operating as a virtual machine, and it is not in bound mode.  Should it be? / Should it be?

  You don't have to configure them in bound Mode. This is for ease of management only (license, roles and inventory)

  OK, here's the problem... When I do a recovery expected, the process stops all the virtual machines on this site that includes the server vCenter/SRM.  I guess that to happen because it's on the same database as my other virtual machines?

  Yep, do not put vCenter VM on the VMS data store and reproduce at all.

  If I run the recovery in emergency mode, vCenter is then moved to the other site and power.  Because the sites are layer 2 and on the same vlan, MRS. watch sites are connected by 2 instances SRM can meet eventhough they are now running on the same site.  This does not seem right to me.

  Do not replicate vCenter / SRM VM and that will not happen.

  Michael.

• The best location for the .vswp file

  I use RecoveProint EMC to replicate my virtual machine for use with MRS. While the implimentaion of EMC RecoverPoint recommended that we allocate a hard sepperate for pagefile guest on a non replicated operating system LUN as the page file on the guest has been constantly evolving.  We have seen a significant reduction in the rate change that enabled us to reach the RPO we were after and with our bandwidth allocated for replication.  I am able to reproduce the LUN for the swap of OS files once and leave.   I'm utilizeing now the option "Migrate storage" with in VCenter to consolidate the VM running on a given LUN and I noticed that when I move a hard to the BONE (not hard for the OS swap) two hard files are transferred to the new location.  Then I discovered that to move one of the files hard for a given virtual machine I have to turn off the virtual machine and to migrate the only hard.  Not perfect, but whatever. To do this, I noticed that the "VM workplace" has been changed to the location of my guest operating system swap file hard.

  It asked if it is a good place for hosting the .vswp.  The .vswp has a significant amount of change as well?  And as the OS swap hard matches the basically wiped clean during a restart?

  Hope it makes sense.

  The .vswp file is created on the virtual machine market. Its size is equal to the amount of UNRESERVED vRAM. This means that if you have a virtual machine with 4 GB of vRAM, but 3 GB is reserved, the .vswp is 1 GB. The .vswp is used as a last resort, if there is a physical RAM memory conflict. It is called after the transparent page sharing or balooning. If you allocate no more of RAM physical vRAM, then it will never be used. BUT, it is removed turn off power and created on the power. If the virtual machine is always on, so no worries with a bandwidth of replication.

  You can place files .vswp on local storage or a separate logical unit number. As Andrew said, you can make this a whole cluster framework if you want. It's all about management. If you are comfortable with it being separated from the .vmx, nvram, etc.. Usually, the concern is the amount of what is essentially lost a costly LUN disk, so it is moved to the cheaper SCSI disk. Assuming that there is no oversubscription of RAM, it will never be used. Rather than taking up valuable disk space, why not just use a reserve of memory in order to avoid its use definitely?

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  http://Twitter.com/dconvery

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• What is the best software to improve performance and free hard disk cleanup. I used MacKeeper, but I'm tired of paying annual fees for this service.

  What is the best software to improve performance and free hard drive cleanup? I used MacKeeper, but I'm tired of paying annual fees for this service.

  You shouldn't have these software.  See discussion of Klaus1

  Do not install MacKeeper

  See also this one by Klaus1

  Viruses, Trojans, Malware - and other aspects of Internet Security

• DPS: Judge to use the parameter Raster or vector in the States of the objects when the majority of the page is a photo. What is the best setting for the overall performance?

  I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)

  Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?

  I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.

  All tips go ahead?

  Brian

  Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/

• The best mod for NB550D/02F news feed

  Hey fans of Mini Toshy,.

  There is no solid FULL only post on the net about how far you can push actully this material from end to end.
  In this post and other assignments YOU... I have a thread of a single window for geeks on this unit.

  The 32 bit Windows 7 OS [family, professional, ultimate] is the best support for chipset AMD grafix and various other drivers of ure choice, this is the best information that I have gathered... Please correct me if Im wrong?
  Also if changes 64bits como thrus thanks for posting in this thread :D
  What we geeks need to know is so information for the SATA controller on the card for the Toshiba NB550D/02F PLL5FA 02F02C, other newer models

  I have some fragmentary information, it could be SATA3 that will support an upgrade of a controller 6GBs SSD and some saying it is done SATA2 part of support 3GBs Committee but the S3 connection will still work saturate the speed of connection of the S2.
  This allows to get ALL the best mod for this sorting device information here and now!

  Post more... and thx 8 >)

  Yes, I noticed that some users here in the forum have had problems using the modules of RAM from Crucial, but Kingston modules seem to run ok.

  But you can extend the RAM to 2 GB only when a location is available as shown here:
  http://www.MyToshiba.co.nz/products/computers/nbseries/NB550D/pll5fa-02f02c/specifications#details

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• What is the best size for the gigantic memory file pagefile.sys virtual?

  pagefile.sys is gigantic 8 GB of files in Windows 7, I want free space of HDD on my SSD for faster backup purposes, but I don't want to hinder the performance that comes first.

  I have 8 GB of DDR3 memory. What is the recommended size for the pagefile.sys for optimal performance?

  Tuesday, April 6, 2010 20:44:59 + 0000, EcoWhale.com wrote:

  > I wonder what would be the best size to choose for the performance as I have 8 GB of physical memory (assuming an SSD with a lot of space)?

  I recommend leaving it alone and let windows decide for himself,
  rather than make any custom setting. It works very well.
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Ken Blake

• What are the best practices for creating only time data types, and not the Date

  Hi gurus,

  We use 12 c DB and we have a requirement to create the column with datatype of time only, if someone please describe what are the best practices for the creation of this.

  I would strongly appreciate ideas and suggestions.

  Kind regards
  Ranjan

  Hello

  How do you intend to use the time?

  If you are going to combine with DATEs or timestamps from a other source, then an INTERVAL DAY TO SECOND or NUMBER may be better.

  Will you need to perform arithmetic operations on time, for example, increase the time to 20%, or take an average?   If so, the NUMBER would be preferable.

  You are just going to display it?  In this case, DAY INTERVAL in SECONDS, DATE or VARCHAR2 would work.

  As Blushadow said, it depends.

• What is the best OS for a late 2008?

  What is the best OS for a late 2008?

  El Capitan.  He will run the latest apps and have the latest safety features.

  Do not install the maximum RAM that your model will accept (best sources RAM compatible Macs are OWC and Crucial).  If the bank account is fat, install an SSD (Crucial and OWC SSD are recommended).

  Ciao.

• What is the best monitor for the MacBook Pro?

  I want to get a 27 "monitor for my macbook Pro for my degree. Which is the best alternative for the thunderbolt display, as it is incredibly expensive. Thank you guys

  I prefer Samsung, and I deployed samsung monitors to dozens of designers who I support (27 "), but almost all of them use the same components of the same factories.

• What is the best SSD for a mid 2010 17 "macbook pro?

  What is the best SSD for a mid 2010 17 "macbook pro?

  It depends of what your budget and how much Go looking

• What is the best OS for Macbook pro 13.3 mid-2010

  What is the best OS for Macbook pro 13.3 mid-2010.

  I am currently using OS X El captian and it's extremelly slow. Please tell us which is the best OS for her to be able to function properly.

  Thank you very much

  specifications:

  2.4 GHz Intel Core 2 Duo

  4 GB 1067 MHz DDR3

  NVIDIA GeForce 320M 256 MB

  The Snow Leopard is one of the more stable OS Ive ever used, but you won't have a lot of features.  Mavericks is in the Middle, has more features and is always quite stable. I would, however, try to reinstall El Capitan, or deleting some files to free up space.

  See you soon,.

  Adam

• Why is the best security for my new laptop Mac and is it necessary?

  What is the best security for my mobile Mac download and is it necessary?

  None, other than integrated security.