computer to the tv using vga cables

Similar Questions

• I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal.

  original title: pictures playing on tv

  I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal. I know that I have selected the right input of the TV. Is there something that I need to set up the laptop to send the signal to the s-video connector?

  Perhaps the following links will propose a few ideas:

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set How to connect my computer to a TV
  http://hookpctotv.com/ PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

• 32HL 933 - no sound in PC mode using VGA cable

  I have a problem with the connection from a computer to the TV (32HL 933).
  I plug the VGA cable view is fine, but I can't connect the sound...
  Where TV takes an audio signal in PC mode? (in this model of TV)

  VGA cable only transmits the video signal.
  So if you want to have the sound on the TV, you use an HDMI cable or you need to connect the laptop to the TV using an audio cable additional. For example, you can connect to the headphones port in the port of the TV

• Connect portable HDTV using VGA cable

  I wanted to connect my laptop to HDTV via a vga cable. I clicked on the external monitor to the graphics option section. then suddenly the screen turns off and now it is completely empty. I don't see anything while VGA connects. I have to disconnect the VGA to my screen on. Please solve it. I can't find the same rotation section intel GMA drivers mobile too...

  Hello
   
  Set the best display on your monitor and check the difference.
  Get the best display on your monitor: http://windows.microsoft.com/en-US/windows-vista/Getting-the-best-display-on-your-monitor
   
  It's normal. You will see a blank screen or an empty window on the computer screen. To view information about the computer's monitor, you must temporarily disconnect the HDTV.
   
  Note:
  To get the most benefit out of connecting your computer to a TV, you use Media Center, found in Windows Vista Ultimate and Windows Vista Home Premium.
   
  For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/HDTV-frequently-asked-questions
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Laptop connected to the TV using a cable HDMI gets no picture just audio

  My TV captures the laptops of screen cable hdmi soon an i plug it in but won't play no audio and I cannot work out how to get the audio working. Help, please

  Hi cus.

  VGA, DVI and component video cables do support audio signals. HDMI cables are supported, but not all, audio signals compatible HDMI video audio support cards. If your TV has an audio input, you might be able to connect an audio cable separated from the sound card of your computer directly to the TV. Otherwise, you need to connect the different audio signal to an output device, such as external speakers or your stereo.

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Update the driver for graphics card on the computer and check.

  How to upgrade the graphics card on the machine driver

  1. click on Start, click Control Panel, and then double-click System.

  2. click on the hardware tab, then Device Manager.

  NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  3. click on display adapters to expand.

  4. under display adapters, double-click the entry for your graphics cards, and then click the driver tab.

  5. click on Update driver software.

  6. follow the Wizard update driver to update the driver graphics cards .

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• resolution of the screen using hdmi cables

  I have a dell inspiron 15 3520. It has a resolution of 1366 x 768. The hdmi cable I have is a cable game and 4096 x 2160.

  I use the hdmi cable only to watch movies from my laptop to my tv.

  When I plug the hdmi cable, my phone tells me the screen resolution does not. It is said that my viewing can be affected.

  Is it OK to use this cable or should I replace it with another?

  Cables have no resolution, only screens/monitors/TVs do.

  Most HDTVs have a resolution of 1024 x 768, but it can vary.  But it does not harm your computer, simply use the resolution setting that your TV manual recommends.

• How many computers can network a drive on a computer on the network using Windows XP Professional?

  How many computers can network a drive on a computer on the network by using windows xp professional

  Hello StephenM007

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Server and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• BlackBerry Smartphones running on Mobile Internet to connect your computer to the Internet using your device

  Hello

  How can we get the subject facilities?

  If someone is using internet through the computer using the BB device.

  Thank you

  This article will help you to connect your PC to the internet using the BlackBerry as a modem attached.

  KB24629 - how to use the mobile Internet for tethering a BlackBerry smartphone to a computer using BlackBerr...

• Satellite Pro A300 - how to get the sound on the TV with VGA cable?

  Hello world

  I have a real problem connecting my Satellite Pro A300 to my Samsung HDTV.
  The video works fine - I used a VGA connection on the laptop and the TV.

  The problem I have is healthy.
  I want the sound either also come from the TV. I tried a jack of 3.5 m from the headphone jack of the laptop to a red and white connection RCA audio on the TV, but it doesn't seem to work.

  Does anyone have any ideas or advice?
  I need of additional drivers, etc., or do some settings need to be changed etc etc.

  Hello

  Normally, to use the 3.5 mm jack plug in the headphones, you need an adapter cable.
  At one end, it has a 3.5 mm jack and the other side to connect red and white audio RCA connections.
  Here is an example of what I mean:
  http://www.optimization-world.com/IMG/prod/3_5_mm_rca_audio.jpg

  I m using such an adapter without any problem. You n t need an additional driver, or something more. It's the same as if you were using a helmet. :)

• How to connect my computer to the TV using HDMI?

  Original title: my TV projection

  How project what shows on the desktop of my computer to my TV / / / I have all ready have my computer connected through a hdmi cable, I want to just be able to see it on my tv and use my laptop and tv as screens... because since I changed to Windows 7, is not let me but I was able to before

  Hi AMH24,

  It seems that your problem is similar, but differs from the original question. Please start your own question and provide the details of your problem so that we can help you.

  http://social.answers.Microsoft.com/forums/en-us/mediacenter/

  Thank you.

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Difficulties of laptop computer connection LG HDTV with VGA cable... Help please

  Hi, I'm looking to plug:

  Toshiba laptop - PSC08E-03M001EN http://www.toshiba.co.uk/discontinued-products/satellite-c650-1ct/
  (Windows 7-64 bit)

  LG HDTV - 42LS3400 link to TV-http://www.ebuyer.com/product/367615

  Cable is VGA to red, blue & green cable (don't know name sorry) image of cable here:: http://www.google.co.uk/imgres?um=1&safe=off&client=firefox-a&hs=Y2a&sa=N&rls=org.mozilla:en-GB:official&biw=1366&bih=627&hl=en&tbm=isch&tbnid=urskVAMn94lrQM:&imgrefurl=http://www.alibaba.com/product-gs/631055727/SVGA_VGA_to_Red_Green_Blue.html&docid=2pwndXSQ14pf8M&imgurl=http://i01.i.aliimg.com/img/pb/056/749/507/507749056_659.jpg&w=600&h=453&ei=wvihUbujHvCR0QXx5oH4DA&zoom=1&ved=1t:3588,r:23,s:0,i:162&iact=rc&dur=1185&page=2&tbnh=191&tbnw=253&start=17&ndsp=24&tx=158&ty=123.

  Connections are correct & safe, I have:
  Display settings - 1 | 2 shows multiple monitors, duplicate.
  RES - 1366 x 768, landscape of the screen, displays duplicate.  If I'm reading - 'another view undetected. "

  Graphics settings - Intel Graphics & Media Control Panel-display:
  General: Built-in-Display SEC5641, Res: 1366 x 768, color number: 32 bits, refresh rate: 60 Hz, Rotation: turn to normal, scale: scale full screen
  Several screens: Mode of operation: Clone screens, the main screen: built in display SEC5641, second screen: monitor
  Monitor/TV settings - not supported.

  Sorry about all this info, just want to provide as much as possible help to identify any problems.

  PROBLEM-

  My TV displays a picture of sorts however we jumpy/fragile & show three (vertical) versions of the same image on my TV.  Black & white, its sometimes a offline.

  I have the wires on connected TV where I got my Wired Xbox, the option on my TV to input is the component, when I turn on my laptop & the entry has the value component that I see the image on the screen & clearer, however, after logging in screen disappears & said that there is no signal.  The only way I can see anything either again is by ctrl, alt & del.

  If I switch to AV2 on the choice of appetizer menu on my TV, it shows the description of the jumpy/fragile image, ctrl alt del - although the picture improves slightly & is not fragile, its still very black & white & duplicated in three patrs.

  Any help would be appreciated?

  Thanks in advance

  Cameron

  Hey Cameron,

  I suggest you to change the display settings on the computer and check.

  Get the best display on your monitor

  Connect your computer to a TV

  You can also try to update the latest version of the drivers on the site Web of Toshiba display adapter and check.

  Please post back with the State of the question, so that we can help you further.

• External hard drive (Seagate) not readable after the ejection using Thunderbolt cable

  Not sure where this question fits as this seems to be a Thunderbolt cable problem but here goes...

  I have 4 TB Seagate Backup Plus external drives for archiving with two drives - backup A and B backup - and two interfaces, a basis of love at first sight and a standard basis of USB3.

  Using the basis of love at first sight that I backed up to 1.5 TB of data on a Mac logged to A disk and ejected from backup format. When I reassembled A backup to verify the data Finder says the drive is not a recognizable car and I had to reformat. I thought that I must have crashed head or something like the disc was still running when I pulled it off the base of love at first sight. When I got tired to reformat the drive in disk utility only 500 GB of the 4TB were available for formatting, so I thought that I've certainly got to have damaged it.

  Then I saved my 1.5 TB of data to a second drive Seagate Backup Plus (backup B) but when I eject this drive (this time I waited to stop and pulled the power over the base before you remove the disk) and then lift the drive that the same error came in the Finder. Suspecting it was the Thunderbolt interface I swapped backup to the base of the USB3 B and all the data is there! I checked A backup and even if she had to be reformatted this time all the 4 TB of capacity was available.

  I also have a Rugged Lacie 2 TB drive with a Firewire interface and it seems to work just fine so maybe the Thunderbolt Apple cable or Seagate sight base. I don't have a second Thunderbolt cable to test with at the moment.

  As a secondary issue readers are not run down after eject either. The heads are parked, but readers continue so I have to pull the power and wait that it happen down before I can remove basic USB3 disks or love at first sight. This problem, even if it's embarrassing, I can live with. In the foreseeable future I'll use the basis of the USB3.

  Everyone knows about this problem before? It sounds really weird.

  I can only give you my opinion of WD boxes and I'm afraid that's not good. My experience with WD boxes have always been bad. My suggestion is to try another TB cable and see if that's it, if not then try to connect another device to your iMac Thunderbolt and test to see if it is the iMac, which I doubt it is. If this isn't the cable or the iMac, then you know that it's the condom. If the disks are recoverable from the speaker, remove them and get a TB of high-quality speaker. My vote goes to OWC (www.macworld.com) pregnant Thunderbolt.

• How to transfer data from a computer to another model using LAN cable

  you try to transfer data using the network cable between 2 laptops. a (old laptop on widows XP) says - limited connectivity and the other (new with windows 8) shows the same.

  How to transfer files and settings from another PC.

  http://Windows.Microsoft.com/en-us/Windows-8/transfer-files-settings-another-PC

• Unable to connect to the internet using my cable broadband from sky. He said that there is a problem with your internet connection.

  original title: connection to the sky

  Hi I have a dell Inspiron mini and when I put my sky broadband cable said inside connected to the internet, but when I opened a page it says there is a problem with your internet or something.i have also the wireless network connection, but I think one of my kids messed with the parameter as , I can't use the wireless setting now.so if anyone has any answers I would be grateful.

  Hi Kerry,

  I would recommend contacting Sky support with their internet service:
  http://www.sky.com/HelpCentre/contact-us/
  One thing, you can try on your own is following the instructions in this Microsoft article and running the Fixit tool:
  http://support.Microsoft.com/kb/299357 
  I hope this helps.

• How to transfer pictures from the computer to the camera using a sd card?

  I managed to transfer several photos from my camera coolpix s6300 (which have been backed up on am sd 8 gb card) to my computer... big... NOW, I want to REVERSE this task and transfer the same photos on the sd card, so in my camera so I can simply take my camera and show people my photos via memory (sd card) on my camera.  How can I do this?  I already copied and pasted, slipped and drugs and all that jazz.  When I open the files on the sd card, it shows the photos I want on there, but when I display them in my camera coolpix, taking the sd card out of the computer and sliding toward the camera, the camera says that have no pictures in memory even if the sd card is there with photos allegedly on this sd card! AAAHHHHGGG! p.s. I'm a fool with computers if you haven't noticed yet! (and with endless sentences!)   Thanks - jax

  I managed to transfer several photos from my camera coolpix s6300 (which have been backed up on am sd 8 gb card) to my computer... big... NOW, I want to REVERSE this task and transfer the same photos on the sd card, so in my camera so I can simply take my camera and show people my photos via memory (sd card) on my camera.  How can I do this?  I already copied and pasted, slipped and drugs and all that jazz.  When I open the files on the sd card, it shows the photos I want on there, but when I display them in my camera coolpix, taking the sd card out of the computer and sliding toward the camera, the camera says that have no pictures in memory even if the sd card is there with photos allegedly on this sd card! AAAHHHHGGG! p.s. I'm a fool with computers if you haven't noticed yet! (and with endless sentences!)   Thanks - jax

  =========================================
  If the pictures that you have copied to the SD card have been published
  somehow... rotation, brightness, contrast, renamed, etc...
  the camera will recognize them is no longer.

  If you have a cell phone, maybe it would display your photos.