The BIOS Setup screen

Similar Questions

• Acer aspire 10th switch does not start the Bios Setup screen

  I'm trying to start on the bios Setup screen to change the boot sequence to test a rescue disk/windows 10 install usb, but all by pressing f2 during POST it just boots to windows of ideas anyone? Thank you

  power the device turned off, press and hold the power + Volume UP

  After awhile, it will boot to the BIOS.

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to enter the BIOS setup firmly

  8.1 - Whenstarting Windows that I'm trying to access the BIOS Setup. I push F2 repeatedlyeven after seizure-Toshiba screen is displayed. Almost always, I get on Windows system, only very few times I get to a tenth of a second at the left bottom of the screen saying line something like "to enter the BIOS. But then it is already too late to grab something. Is there a howto method course enter the savelie BIOS Setup? I have a Toshiba-computer laptop-P500-PSPGSE.
  Thank you very much in advance youvery.
  hansm

  F12 after start-up for multiboot-selection-Menu does not work either.

• Satellite 1400-103: cannot access the BIOS Setup

  I have problems to enter the BIOS setup. At the start screen 1, I press ESC, and then check the system appears. Then press the F1 key. Once on the button, it takes me to the BIOS Setup and reboot the laptop. Any help will be much appreciated.

  James

  The laptop starts properly? I want to say is possible to get into the Windows operating system?

• Laptop does not go beyond the the BIOS splash screen

  Hi, I have one of these laptops the DV6000 feared. He died a few weeks ago (powers to the top, but nothing on the screen) and this weekend I did the heat gun reflow. In any case, which seemed to be "fixed." Now, here's the problem. When I turn, I see the splash of HP screen and options for F10 (enter Setup) or ESC for boot order. If I press F10, it will say "Please wait" as it tries to enter the BIOS Setup but nothing else happens. If I press ESC, it tries to start but only happens to a screen that indicates the version of BIOS, DVD/RW model, model of hard disk, etc. It does not start in Windows Vista.

  Now, if I take the hard drive, I can enter the configuration of the BIOS without any problem. If I use a Ubuntu installation DVD disc, I have Ubuntu load (from the DVD player) without any problem. I am at a loss. Any help would be appreciated.

  Thank you!

  It solved! I had to remove the HARD drive to get into the BIOS. In the BIOS, the native SATA setting must be disabled. Again, this makes no sense to me, but to save this setting and rebooting... success! My laptop lives. DavidPK, thanks for your suggestions.

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• My computer does not load past the Bios Dell screen

  Vista 32 bit Home Premium on Vostro 200
  Hey, my name is Christian and this is my problem:

  It all started last night when I (stupidly) decided I should change my screen windows open, you know, black screen, where the green bar would float through from left to right while the computer responsible. I decided to change to a sort of landscape of Lake, but this is not the point.
  Before that, I chose at the next restart, the registry would be defragged and there would be controls memory.
  I am so down and restart the computer.
  Computer turns on and I the landscape to the instead, loading screen unless it's just a picture, so there is not move bar telling me whether or not the computer was loading.
  And the screen just wouldn't change. I assumed that defragments the registry and memory check took place, but I was rather paranoid about whether or not something is going on I turned manually the computer off hold the button down.
  I turned it back again and he went to the same - screen landscape and would not pass as usual. Paranoia took ahold of me and I turned it off once again. I did it a couple of times (and I apologize) until a system repair came automatically.
  I thought it was my way out of this problem, but it didn't really fix anything, and the screen landscape had changed now in a black screen which seems to have a background image screen to vista aurora discoloration in the Center.
  And it's right now. It does not seem to go beyond that and I think now that it was all due to the change in the loading screens.

  I even left on overnight assuming the scans took place and it would be frozen until the tests were performed.
  Nothing has changed.

  I tried the obvious; safe mode does not work exactly. I click on it and all I get is the names of the drivers being loaded then a very slow black line through every driver leading one by one.

  Unfortunately, I deleted the backups of my restore system checks an hour before this happened and I did a lot of memory by pressing F8 and choose the option.

  I'd even do a factory reset as long as I've had all my files and drivers on a hard drive.

  I don't know what to do, I am completely distraught. Any advice would be helpful and thanks in advance!
  (a factory reset would be VERY VERY last resort)

  Christian.

  Hello

  as safe mode does not do a start-up repair disc

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If it does not here's how to save your data

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed!

  and how to reinstall vista

  using dell dvd

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  using the dell recovery partition

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

• How to activate quickly publish in the BIOS Setup?

  Hello world

  does anyone know how to enable quick post in the BIOS Setup? This option seems not to be there in Configuration or maybe I'll only not on this issue the right way. Any help would be appreciated.

  See you soon
  AJMAL

  Quick post option does not exist and there is nothing to do. What you can try is to use a few hardware diagnostic tools.

• Want 4-1130US access Intel RAID Manager from the BIOS or screen of the Advanced BIOS setting?

  I just got the ultrabook of 4-1130us envy.  I need to access the screen of the Manager RAID Intel and advanced the BIOS configuration screen.

  By pressing "Esc" at startup until gives me only ordinary BIOS screen, and many options are all grey that I can't change.  How to access these screens?

  Thank you

  Thank you

• Satellite L750 - 1 DM-how to enter the BIOS setup?

  Hi all.

  Tried several combinations of buttons - such as "DEL" or F' or F12 and so forth--but nowhere I could access the BIOS Setup.

  Does anyone have any useful information?

  Best regards.
  Robbs

  F2 allows to access the BIOS
  Press F2 quickly several times in line once the laptop has been powered.

• How to enter the Bios Setup Satellite 4030?

  I am looking for information how to enter the Bios Setup.

  To enter the BIOS settings, use the ESC button.

• Y50 HUNGS ON THE BIOS SETUP

  My Y50 hungs in bios Setup, I can't use the arrows or anything like that...

  It's like that

  https://www.YouTube.com/watch?v=cauQ2NiuTIM

  My bios version is 1.09

  Ok...

  remove the ethernet cable... go to the bios Setup... disable PXE boot to lan... Save and reboot... Put your ethernet cable back on... don't go to bios again... no hunging...

• After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter the BIOS setup

  After flashing my Bios on Pavilion DM4t-1100 CTO, I can no more enter into the BIOS setup (via the ESC key).  I installed the BIOS twice and the computer always ignores the ESC key and launches Windows 7.  Any ideas?

  Well you're response made me experiment more and I discovered that the ESC key works if I type repeatedly instead pressed constantly.  Thank you for taking the time to answer!

• WIN VISTA: After installing new drivers through the utility Dell to keep the PC to date, DVD not working anymore (and not located in the bios Setup)

  When starting, it not recognizing my DVD drive more.  I went into the bios setup and it does not appear in there.   I have to re - install the bios?  or ....???

  Hello

  If the drive does not appear in the BIOS, there is a hardware problem - either with the player, wiring,
  or the motherboard interface circuits.

  Check with a real computer store (the one that makes its own internal circuits and not of leeks and poster
  a Best Buy or other stores) or Support of Dell.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.