The BluRay drive firmware - DV7-3173nr

Similar Questions

• Satellite C660 - update the HARD drive firmware question

  I have satellite C660 with hard drive: MK3275GSX, firmware: v.GT001M. On another Web site support site I found the update of firmware for v.GT002D ([link: http://www.dell.com/support/drivers/mw/en/mwdhs1/DriverDetails/Product/latitude-e6330?driverId=FP21C&fileId=3126089791&osCode=W732 & languageCode = en]).

  Can I use this update?

  Question may be stupid, but why firmware update HARD drive? Over the past 10 years I ve ever installed an update of the HARD drive.

  If Toshiba support doesn t offer an official update on the download page, I think that you don t need.

• 23P 108 HP has in a BluRay: lack the BluRay Driver for HP BD CMB UJ160 B

  After the upgrade of form 8.1 Win and clean then reinstall Win 10 Pro 64 bit on my 23P108A all in one HP Device Manager is showing the name of BluRay player, but with a yellow error against her.

  The BluRay player does not appear in my computer, either - it's as if the drive does not exist.

  I tried to uninstall the driver from Device Manager and reboot the machine and also to look for a new driver online, but does not.

  Is there a dedicted to this device driver that I can download?

  I scanned the system using HP Support Assistant, but it does not identify the missing drivers on my system.

  Thank you

  Hello::

  See if you make the registry changes described in resolution steps 3 and 5 from the link below the job for you...

  One of them should solve the problem.

  https://support.Microsoft.com/en-us/KB/314060

• PS5000 update the hard drive Firmware

  Hello

  I have a group of three members (P5000, PS5000e & PS4100) equallogic I used storage Dell Update Manager to update all three to V6.0.11, but when I tried to update V7.0.10, he asked for the firmware of the hard drive for the PS5000. So I downloaded the Firmware of the drive hard v8.0 and tried to apply, it didn't and after reading more far away the ps5000 has a controller of type 5, and it will not apply.

  Is it possible to get it to apply, I tried FTP and using the CLI interface but no joy, dell equallogic support will apply the firmware if the PS5000 is no longer under warranty? or what I can do to enforce?

  If not can I bypass this firmware of the hard drive and just update the Group of v7.1.8 using ftp and CLI? because the use of the Dell Storage Manager up-to-date it auto selects the box install the disk firmware.

  Kind regards

  Dan

  Hello Dan,.

  There is no way to update the firmware of the drive on Type 5 controllers.  No matter how you try to do the upgrade process.

  Yes, you can skip the update of the firmware of drive by directly FTP'ng firmware EQL to each Member, and then run the update to the CLI process.

  If you have the available series cables I suggest you do updates through the series, or at least check connections series to work on all members.

  Kind regards

  Don

• sp40966 drive firmware update problem

  While they inspected the m9400t support page today, I found the following link:

  IMPORTANT - prevent any hard drive crash

  I checked the link and found that I needed this update the hard drive firmware as my main drive is a Seagate 750 GB SATA drive. I've printed the information, then progressed to follow the steps. All is well until the phase of "reboot" and that's when things went south!

  First - when the computer reboots, I had the update screen and saw the message on the interface of disc must be set to IDA and because the mine was set to RAID I reset to IDA and restarted.

  Next - screen update again and began the process of update. Received a message that file binary download was complete. Following message "trying to read HP26CE3D.bin ', and this is where things went"South ".

  After seeing this message for ~ 30 minutes I had the feeling that nothing was happening, so against the warning messages on the screen to update on "do not restart", I did a power reset off.

  On the start of Vista could not start and I had the repair screen 'System '.

  Long story short, after several attempts to reboot the system using my diag CD material and my system restored I got the answer of the CD.

  On the next attempt of cold start, I used F10 and reset my disk for the original RAID interface and the system booted!

  So, I wonder just what is happening. What has the RAID vs IDA to interface to update the disk firmware?

  Anyone else out there there is a problem?

  ATTENTION: I cannot always be right, but I always give advice.
  Kudo accepted with gratitude if I have been of help to you.

  GOOD NEWS!

  Yesterday, I downloaded the update sp40966 on the site of HP support and installed without problems or errors! I now drive HP26 firmware version on my Seagate 750 GB drive. I don't know that what has changed, but the installation goes smoothly. Here are a few observations on this installation vs the other installation I tried that failed.

  1. this time the installation I have no advice or warnings on affecting the drive interface in bios RAID IDE as with the previous installation.

  2. once the bootable CD was created when I opened it I could see the files and folders in contrast to the previous three CD

  3. I'm a happy camper now. I'll mark my issue as resolved.

  Thank you to everyone who took the time to respond to my problem and now: "this case is closed the King!" (the last is for we all had to grow up with radio instead of television. Live long and prosper!

• Add the second hard drive for HP Pavilion dv7-3173nr

  So rumor is my DV7 may take a second hard drive.

  So I got a second drive, open the bottom where the reader will, and there is no SATA connector. Apparently I need a shopping cart or something, but I can't. Am I missing something obvious?
  
  Thank you.

  Yes you need a shopping cart and a connector. The interface is not a standard SATA plug... There is a cable that connects the SATA drive in a small plug in the second Bay.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=222

• How can I check the version of the firmware on the optical drive on Satellite P200

  I am a Satellite P200 and my Tempo suggests to download an update of the firmware to TO35, which only works if I TO33/34, how can I check that I have? I tried searching on my machine, but I guess that the firmware is not the thing to appear in searches. Any help would be appreciated, thanks in advance!

  Hi guys

  > How to check the firmware
  You can use a 3rd party program like Nero to burn.
  Nero presents the version of current firmware of CD/DVD players

  The firmware TO33 or the TO34 should already exist on the TS-L802A drive.
  Please check if you have exactly the same drive. TO35 firmware only works with the TS-L802A.

  If you have an older version of fimware as TO33 then please post here again!

  *@Voodoo*
  You really have a TS-L802A drive. ? How did you check the firmware version?

• Satellite A60: SD-R6112 drive firmware is not able to detect most of the discs

  My Toshiba Satellite A60 was an engraver of DVD SD-R6112 with Firmware = 1530 is not able to detect most of the discs. I mean that it is not able to detect most of the records he used to read or run however it works the CD provided with laptops for example installation and tools and Utilities CD.

  Recently, I updated win xp to SP2 and I think that this problem is arised for this reason (but not sure)... I tried to reinstall the driver and also tried the latest firmware upgrade, but it is said that it does not require.

  Everyone can you please suggest me the solution. I really tried all but it does not work.

  Hello

  The fact is that each player doesn t work with all THE CDs or DVDs.
  Sometimes, the most recent firmware update could solve these problems, but you will not get a 100% guarantee that it will work.
  I have tested many media and now I decided to use the TDKs CD and DVD.
  I m happy because now I have problems with this media.

  The only solution is to test the media.

• Not compatible with the selected drive - Satellite A300D firmware update

  Hi, I have a problem with the update of the firmware. When I try it says "the Firmware is not compatible with the selected driver.

  And another problem is that my dvd drive does not DVD - R and DvD + R is running very slow and big trouble, it must try several times to succeed.

  Please help me.

  Hello

  Maybe you should tell us what CD/DVD drive you have and where you have downloaded the update of the firmware.
  In my opinion firmware update is not normally necessary.

  Have you ever tried to remove upper and lower filters in the registry? This often solves problems with ODD.

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• DV7 - 2277cl: replacing the hard drive

  Need to replace the hard drive SATA II C: / and the clone before it crashes.

  The DV7 - 2277cl will manage an orreplace SATA III with SATA II?

  If you have an interface on the motherboard sata, you can install a sata, sata 2 or a sata 3 without any problem, but the speed will be limited by the slower interface.

• DV7-6143eo cannot disable the keyboard driver

  Hello

  A time, that I had a problem with some keys on my keyboard, repeating endlessly as if the button was pressed, even if the current button does not seem to be stuck. He would usually stop repeating after pressing the key. I had a similar experience with another laptop and it ended up repeating constantly the key even after pressing the key.

  Until I'm in a similar situation with this laptop, I decided to get a usb keyboard. It worked for several months, but suddenly the issue with a key constantly repeat even after the key on the keyboard of the notebook appeared.

  As a temporary solution, I turned off the key 'w '. Try to delete the driver for the laptop keyboard simply result in it to be reinstalled on reboot. It seems that my only option is to disassemble the laptop and remove it or the deactivation of the pilot.

  I have no experience with the dismantling of a laptop and would like to avoid this. If I go into Device Manager, a disable option does not display the drop down menu to the pilot and in the properties of the option is grayed out.

  The laptop is a dv7 6143eo and use windows 7 64-bit. The name of the driver is "Standard PS/2-keyboard" (keyboard = keyboard).

  Sorry for the double posting, but I felt it deserved its own post.

  I managed to finally find a solution. If it is not as elegant as I had hoped, it seems to work.

  1. open Devicemanager.

  2. right click on the keyboard driver for laptop computer-> select "Update Driversoftware".

  3. Select "browse the computor for driversoftware.

  4. choose "Let Me pick from a list of devices on the computor.

  5. click on "view the material compatibel.

  6 find a driver that is not compatible with your laptop, I personally went with 'Toshiba - Toshiba USB 109-keyboard Japanase'. Click Next.

  7. click 'OK' in implementing cautioned, we want something that is not compatible after all.

  8. it should tell you that the driver has been installed and ask if you want to restart.

  After restarting your laptop keyboard should work now not at all, including the boring repeated key.

  With my limited knowledge, I can't guarantee that this will not be some issues (can't think of everything well), so do it at your own risk.

  I hope this will help others and post here will make it easier for others to find the 'solution' timetable, that I had to spend.

• Seagate Hard Drive Firmware Update for the drive model: ST1000LM024

  I have (HP Pavilion dv6-7180se Entertainment Notebook PC). All the drivers for this model installed correctly except the drivers Frimware (Seagate hard drive Firmware Update) and (PLDS Optical Drive Firmware Update). the first one says "this hard drive model is not supported. Model = ST1000LM024"but my hard drive came from the factory, so what is the practice solution to install this driver? images .view of problems:

  This is to seagate:

  and for PLDS:

  Need help. Thank you.

  What mean of these messages, is that these "Firmware updates" do not apply to material in your specific computer. The two "Seagate Firmware Updates" are respectively for the hard drives of 250 GB / 320 GB and 500/750 GB hard drives. Your computer comes with a 1 TB hard drive, which is not subject to updates of the firmware. The "PLDS Optical Drive Update" is for another drive to CD/DVD only installed in your computer and also does not apply. There is no further action to take... Do not attempt to install these updates of firmware, because they do not apply to the hardware in your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Adding SSD to the second Bay drive in DV7-1285dx - advice please

  So I recently bought a used DV7-1285dx and is considering the addition of a solid state drive to run the operating system. The current drive is 250 GB 5 400 rpm. Can I simply buy a 2.5 "SATA SSD to any size - I'm looking to 50 GB - and plop down inside and install Windows 7 on that? I've searched the Net and have not seen a solution that does this is clear.

  BTW, I think that this HP forum is great. I got a good and fast response to a question I asked yesterday. It's better than the customer support (do not hit the HP - I mean in general)!

  Thanks, rich

  porcelain808 wrote:

  So I recently bought a used DV7-1285dx and is considering the addition of a solid state drive to run the operating system. The current drive is 250 GB 5 400 rpm. Can I simply buy a 2.5 "SATA SSD to any size - I'm looking to 50 GB - and plop down inside and install Windows 7 on that? I've searched the Net and have not seen a solution that does this is clear.

  BTW, I think that this HP forum is great. I got a good and fast response to a question I asked yesterday. It's better than the customer support (do not hit the HP - I mean in general)!

  Thanks, rich

  I think that an SSD of any size should work. I recommend at least 64GB for Windows and manufacturers such as Intel, Corsair, Crucial or Patriot. I've seen a few posts that SSD works on Dv7 computers so don't worry portable...

• Pavilion dv7: replace the boot drive primary hdd2

  My flag has two hard drives. I cloned the startup disk (1) on the secondary drive (2). Now, I want to move the disc 2 in the main drive as boot drive Bay. What is necessary to achieve this. Is there the bios settings to change or identify the settings on the readers who need to change?

  N ° all what you need to do is physically swap posts. The method varies a bit between generations dv7 different but basically you remove cover license plate and Exchange readers, for one another. If you give us the exact model, we can probably find illustrated instructions and maybe even a video.

  Only in the Bay of primary is bootable, which serves as a fail-safe.