The checkbox "Allow bluetooth devices to use your modem to connect to the internet" on my vaio windows 8 is grayed out.

Similar Questions

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• Bluetooth device is paired but does not connect

  Hello

  I have a DELL Inspiron 15 laptop and I have windows as operating system 8.1. After the update to windows 8.1 that I am unable to connect to a Bluetooth device, although getting paired do not connect. I tried and find all the solutions on the service check and update the drivers and everything is in sync, but I am still unable to connect.

  Hi Harshank,

  Thanks for posting your query on the Microsoft Community.

  This issue may arise, when the Bluetooth drivers are not updated.

  Please provide the slot details, to help you best.

  (1) have you installed the latest drivers for Bluetooth?

  (2) what device you are trying to connect with your PC via Bluetooth?

  I suggest you to download the latest Bluetooth drivers on the manufacturer's Web site and check if it helps.

  See the link below to download the latest version of Bluetooth driver:

  http://www.Dell.com/support/article/us/en/19/SLN113225/en

  If the problem persists, ask Op to install the driver in compatibility mode and check.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  It can be useful, we meet with the status of your question. We will be happy to help you.

• I can't change the color of the text or objects? The color window is just grayed out. I don't only use shades saved already. Any ideas?

  I can't change the color of the text or objects? The color window is just grayed out. I don't only use shades saved already. Any ideas?

  Start by we tell what version of InDesign? What operating system /.

  Try to restore your InDesign preferences:

  Garbage, replace, reset or restore the application's preferences

• When I try to access XPMode in Win.7 - it either requires a password that has never been, and most of the adjustments or places to change something is grayed out

  When I try to access XPMode in Win.7 - either, he asks a password that has never been, and most of the adjustments or places to change something is grayed out in the newspaper on the page for XP, or on my computer where there is a chance to change things like "debt", etc.  My registry maybe THAT screwed up? Nothing I try to do seems to help. I can delete the virtual machine and the XP mode and then try to re / add?  Running out of ideas... ALSO, the repair of my system does NOT work!  No restore points that would take me any more than a few days back.  This registry problem that happened there is at least a month... Thank you-Jerial

  Hello

  The question you posted would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

• My Lightroom CC suddenly stopped syncing with Lr Mobile - all the icons of indicator in my collections are "grayed out" - what do I do?

  My Lightroom CC suddenly stopped syncing with Lr Mobile - all the icons of indicator in my collections are "grayed out" - what do I do?

  Hi alans64812546,

  Could you please confirm what operating system do you work?

  Also are there all collections which you synced prior, so it is an Anti Virus on the computer?

  Kind regards

  Tanuj

• I'm on Photoshop CC and I want to use the 3D tool, but can't (it is grayed out/unclickable). What should I do to use it?

  I'm on Photoshop CC and I want to use the 3D on a police/Word tool, but can't (it is grayed out/unclickable). What should I do to use it?

  Hi fabianao84983383,

  Greetings.

  • Make sure that your computer meets the minimum system requirements - system requirements | Photoshop
  • And if he then checks the below mentioned things.
  • Image must be in RGB color profile
  • Check in the preferences - performance graphics card use is checked under Advanced mode of drawing that you have selected.

  Concerning

  Rohit

• Time capsule of access on the Internet (PC MAC or Windows)

  Hi, I have a Time Capsule, and I want to create a folder and be able to access from anywhere on the Internet (regardless if it's on a MAC or PC based on Windows). I read several posts and google, but still I am unable to set up the time Capsule. Can any experienced user me explained step by step?

  Thank you

  SGL

  You need to tell us a few things.

  1 do you have TC as the only router in the network.

  If this is not the case, the configuration is entirely via the main modem router combo.

  Without a public IP address on the interface wan everything that is your router, you will not be able to access it remotely. For the most part, wireless, satellite or internet shared building will not allow always remote access.

  2. double NAT will never work, so if you already have another router modem the TC must be in the bridge.

  3 Apple offers NO WAY for PC/windows remote access to the TC. Neither iOS btw... the Apple of the only method allows is AFP via a Mac.

  Local people do via SMB to TC port mapping... It is poor and does not always work.

  The tool used for iOS, filebrowser shows how this is possible.

  http://www.Stratospherix.com/support/gsw_timecapsule.php?page=6Remote

  
  

  I do not recommend this somehow... It's open ports in a way that reduces your security seriously.

  I repeat... Apple has no PC access.

  4. There is a safe way to do it... buy a vpn router and use before the TC. VPN is recognized global method for secure remote access. Who will work for any device having vpn client available... OpenVPN is the easiest in terms of cost, configuration and security.

  5. There is another method entirely, and that is to store the files you need to join in the cloud... Cloud is a better resource than to use your own router as Pseudo-nuage.

  If you eliminate the need for PC access then use BTMM for access to the TC.

  CCMM is authorized only and only the Apple method which are likely to work.

  Have you even tried yet?

  See Tesserax doco on remote access.

  https://discussions.Apple.com/docs/doc-3413

• Cannot access the internet on a network Windows XP when Windows 7 goes to sleep

  Original title: Windows 7 Windows XP network problem.

  I replaced a Windows XP computer on my node 4 (2 PC, printer 2) cable network with a Windows 7 computer.  When the Windows 7 computer in mode 'sleep' the other (XP) computer cannot access the internet.  A message appears that there are 2 computers with the same IP address.  If I wake the computer 7 fine.  That is what it is?  I agree not all files between the computers.

  Hello

  It is usually the case when, for example, a router is off, but one or more of the devices connected to the router are left on.

  The devices to retain the ip address assigned to them, but when the router starts up again it has no knowledge of this. If when you start one of the other devices, the router can assign an ip address already in use. Concrete example that I reproduced with my router and the PC...

  • Start the router, then boot PC1 and PC2 - the router (192.168.1.1) will allocate for PC1 192.168.1.2 and 192.168.1.3 to PC2
  • Turn off the router, then turn off PC2, restart and shut off again
  • Put the PC1 to sleep
  • Start the router and PC2, the router does not PC1 and allocate 192.168.1.2 to PC2
  • PC1 to wake up and there still 192.168.1.2 who now is a confrontation with PC2

  Other ways to reproduce this situation may also be possible.

  All devices on your network must have a unique ip address, where the warning message.

  If you get this situation once again, the solution is to turn off all devices, including the router, then restart the router, then restart all devices connected to the router.

  To avoid this, you may be able to put ip Reservations for your router address which will ensure that all devices connected to the router always get the same ip address (unique). If you are unsure how to proceed, we will need your router brand and model to help.

  Tricky

• HELP linksys wireless USB adapter: (model # WUSB54GC) "acquiring network address" not actually connect to the internet! ?? Windows xp pro

  Hello. Ive been at this for 4 days now, I can't find a solution. I'll try to remember as much as possible regarding what ive tried.

  here goes...

  long story short, due to unfortunate system errors, I have reinstalled my OS XP home to xp pro. PC works great now! problem is... now my wireless adapter wont connect to the internet.

  When I had xp home edition installed, I could just plug in the adapter, and a few seconds, it would connect to the favorite network. (with all settings on Auto) no problem.

  now that ive put in OS, it's just cycling "absorbing the network address" infinitely...

  his watch the access point, the preferred network, showing the signal strength and do not show errors in Device Manager. right-click and choosing fix do not work. It gets stuck @ renewing IP address scene. its not send or receive packets under status.

  He EXPECTED to be functional? It uses a 10-digit WEP key.

  Ive tried both the linksys wireless monitor and the windows zero configuration utilites.i since removed the lynksys software screen because it never worked anyway. WZC is that used to work on xp family.

  I used " ipconfig/all" to determine the values of the network on the host pc. I tried manually punching in those values (IP address, subnet mask, gateway and DNS settings, according to the suggestion of a networking of friends) on the adapter wireless itself; using tci/ip options. still does not connect.

  Ive tried different USB ports, all that seems to do is to change the number of the wireless connection.

  It just does not connect to the internet.

  I have the driver I need for this after contacting linksys. I also disabled windows firewall and the firewall/antivirus of 3rd party associated with the network.

  He knows questions w / windows xp professional and this particular wireless adapter? (WUSB54GC) that's the only reason why I can think of that is not connected.

  what I forget? internet hard wiring of an ethernet port is not an option because there is no ethernet card installed in the pc.

  any help is greatly appreciated in advance.

  Thank you.

  Sorry it took so long for me to return.

  It was a setting under working group which had to be adjusted from reinstalling windows. (something that has been disabled I forgot, don't remember what it was since its been like 3 weeks)

  that he got the running dhcp... That is to say. allowed 4 dependence to work progrmas, boom, problem solved.

  the adapter now works with the automatic settings, using WEP encryption. as it should, and it was.

  Thank you very much for the replies, I appreciated the help.

• Cannot access the internet with bridged network - Windows 7 64 bit host, XPSP3 comments

  I use VMPlayer v3.0.1 build-227600 on a PC under Windows 7 64-bit. My guest operating system is Windows XP Professional w/SP3.

  I read all the messages on the use of NAT for the guest operating system can access the internet. But when I do that my guest is unable to access my Oracle server on my network. If I use Bridged my guest can access my Oracle server, but it cannot access the internet! How can I fix it? Shouldn't VMPlayer allow the guest OS to access the network and the internet? I need these two features.

  Any help would be appreciated.

  the simplest solution would be to add a second NIC to your comments, so that you can have bridged and NAT at the same time

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Not connected. Connections are available. I am connected to the internet but, and all this shows is gray bars with the yellow connection star on them.

  I am connected to the internet, but it is said in the toolbar not connected and connections are available. There is only 1 link and I'm connected to it. How can I change display green bars, instead of grey bars with a yellow star?

  As the title says.
  It's weird, and I think that this is the reason why some of my programs connect properly?
  Does anyone have a solution to fix this problem?

  Hi DamienDwyer,

  1. are you referring to the status of job internet bar?
  2 when the problem started?
  3. have you made changes on the computer recently?

  Method 1
  Try troubleshooting of network running.

  Use Network Troubleshooter event logs to solve network problems
  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 2
  check the status in safe mode with network and display the results.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3
  I suggest you try the steps from the following links:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• On the first 14 elements running "manage catalogs" is grayed out and not available

  How can I convert an existing catalog created by 12 elements into one for use under 14 elements when the "Manage the catalogs" option is grayed out?

  Photo Philippe wrote:

  How can I convert an existing catalog created by 12 elements into one for use under 14 elements when the "Manage the catalogs" option is grayed out?

  This is not normal.

  First of all, the installation of 14 elements, you should have received a message to allow automatic conversion of catalogues (I assume that you install PSE14 on the same computer).

  Try the Organizer while keeping the SHIFT key. You get a message with options, including to open a new catalog? If so, the problem persists?

  Reset the preferences or reinstallation may be necessary.

  Who is you OS and OS version?

• Most of the pieces in my albums and playlists is grayed out and will not play.

  When I go to play the songs in iTunes a lot of my songs (mastered and uploaded) are grayed out and I can't play. For example, when I press shuffle play only items not greyed out. Sometimes, the album is grayed out and will not play. This has never been a problem until recently. I used to love iTunes, now with each update, it seems more confused. Help please. Thank you. Rock ' Roll!

  Switch to the view of songs. The greyed out, you saw previously correspond to unchecked items? If for Cmd-click any empty box must all check.

  TT2

• The Add links and add server behaviors are grayed out and not usable.

  Good evening everyone,

  As indicated in the title, I am trying to add a record set to my project, and it is not giving me the option.  First of all, let me tell you what I use:

  Dreamweaver CS6

  XAMPP server running PHP and MYSQL

  Shows connection to the database and can be used in Dreamweaver.

  Site is built in PHP, and a .php page is currently being developed.

  Everything I have read during the last hours 3 research that said I should have links to a + link, unfortunately I do not have.

  No idea where the problem fixed so that I can continue on with the design of the site?

  Thanks in advance,

  James

  Well, I'm not sure if this is a permanent problem or not, but if other people with this problem can't seem to find an answer, try this one and let me know if it works for you.  I got antsy waiting for a response and just start playing with everything I possibly could, and that's what I did.

  When I clicked on the links, the + is grayed out, but gave me some options on how to do.

  Said one of these options to set up the test server with the words "test server" sites in blue.

  I never clicked this option, because my test server has already been put in place, and showing as connected, but I clicked on it in any case.

  He opened my server that was already there in, I hit then save... and voila!  All of a sudden, my bindings and behavior of server + worked!